Development of Exhibition Ground at VL Puram Municipal Corporation Site Rajamahendravaram with Thematic Zones including Motion Chair, Floor Fountain and Construction of Toilet Blocks along with Plumbing and Electrification works in Rajamahendravaram.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Collection and Supply of Gravel from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling,ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Tie BEAM / PLINTH BEAM)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for COLUMNS)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,Including centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Roof Beam)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges,on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, Including centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site enginee (For Roof slab 150mm thick Slabs)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for Sill Lintels)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class from approved Kiln Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using Common burnt clay bricks of Non-Modular of traditional size 23 x 11 x 7cm having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509

Providing Plastering with CM (1:5), 12mm thick single coat in CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding seigniorage charges, on all materials, Including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM 2 coats 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., excluding seigniorage charges on all materials. Complete for finished item of work as per ss and as directed by the site engineer.

Flooring with ceramic tiles,Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711,IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., excluding seigniorage charges,complete for finished item of work. including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing dadooing to walls glazed coloured tiles( glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs ) 1st quality of size approved by Engineer-in-charge set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spreading @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand, water etc.excluding seigniorage charges, complete for finished item of work.

Flooring with Multi Red Colour Granite 18 to 20 mm mm thick slabs other than black and regular colours set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, excluding the seigniorage charges on all materials including cost of all materials like cement, sand, water and tiles and etc., and also including labour charges for dressing of tiles ,cost and conveyance of all materials and all labour charges etc., complete for finished item of work as per ss and as directed by the site engineer.

Full Rounding the edges of Marble/Granite stone slabs of all thicknesses including polishing the same. Including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting to new walls with 2 coats of acrylic emulsion paintinterior grade having VOC (Volatile Organic Compound) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls .

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound ) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supplying & Installation of Toilet Cubical Systems with 12mm thick HPL Sheet partition walls with Doors and Accessories for Tiolets, the compartment should equiped with the following indicator lock, Door knob, Auto return Hinge, Coat Hook, Adjustable legs, Aluminium annozied items including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Pedestals )

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Manufacturing, supply, delivery and fixing of compound wall M.S. Grills with different sizes of angulars and square rods including cost of all materials, conveyance to the work spot and all labour charges welding cutting, bending, painting with redoxide paint and all fabrication charges etc. complete as per S.S and as directed by the departmental authorities.

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for New Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheet with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all materials and labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Supply of precast concrete blocks for paving of M -35 grade and thickness not less than 60mm for Light Traffic Areas confirming to IS 15658: 2006 in all shapes and designs as per the manufacturers specification and labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading and unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc., complete as per S.S. and as directed by the Departmental Authorities.

Flooring with Multi Red Colour Granite 18 to 20 mm mm thick slabs other than black and regular colours set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, excluding the seigniorage charges on all materials including cost of all materials like cement, sand, water and tiles and etc., and also including labour charges for dressing of tiles ,cost and conveyance of all materials and all labour charges etc., complete for finished item of work as per ss and as directed by the site engineer.

Suppy , Fixing and Installation of 24 Motionchairs with base each fitted with 4 nos. racing car seats comprising FRP shell and detachable cushions with removable hard wearing coverings for easy maintenance. Standard colour for shell and cushions: red, other colours are available. Base has pneumatic cylinders, controls and servo valves to provide 3DOF (degrees of freedom) of fast and exiting movement under programmed control and synchronized with the video film. Each base has: a flexible skirt; two grab handles and footrest per seat; air filter and regulator. SFX (special effects):In each seat – 1. Leg tickler 2. Neck blast 3. Towards front of rider (from back of seat in front, a separate bar provides this to front row of seats) - 4. Water surprise 5. Air blast Special effects Wind by fans (2nos),Smoke machine, Bubble machine,Snow machine, Strobes(2 nos) Projection and Dynamic Vision 3D:2 nos BenQ or equivalent projectors each 5000 ANSI lumens, laser light source (20,000 hours life), WUXGA 1920 x 1200 Full HD 3D, DLP.Adjustable mounting frame and cabling.3D high gain Harkness screen with viewing area 4.8 x 2.7m with mounting frame.Polarising (circular) filters for projectors. Polarising (circular) specs for viewers with Ultrasonic cleaner for maintaining and sterilizing 3D specs. ( 30nos 5:1 Sound system:Speakers: Premierworld® or AhujaMain speakers 2nos.Centre speaker 1 no.Rear speakers 2 nos Sub woofer 1 no.Amplifiers: Crown or equivalent total 2100w RMS.Cabling - 1 lot Control and electricals:Self contained electrical panelComputer based control system (Windows Operating system). Monitor, keyboard and mouse. UPS for control system.Cabling to each Motionchair™ base.Power requirement – 380v 3ph 50Hz 18Kw. including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply, delivery, Installation, testing, and commissioning of a floor fountain consisting of in-ground jets as self-contained units, each comprising brass nozzles, stainless steel (SS 304) solenoid valves, and 21-watt RGB LED lights, all mounted on an SS 304 plate and encapsulated within an SS 304 shell. The shell shall be embedded in the ground so that the plate and nozzle tip remain flush with the floor surface. The scope includes a set of 24 such jet units, two 3 HP mono submersible pumps with suction strainers, one indoor-type electrical panel with a stand-alone dongle, one control panel for solenoid valves and LED lights, one water level sensor, and all required cabling for pumps, valves, and lights. It also includes complete programming of the fountain system. All works shall be carried out as directed by the departmental Authorities

Bore Well and Pump Set

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc., Drilling of Bore well of 200/225/300 mm dia for insertion of pipe dia of 100/125 mm

Supply and Fixing of PVC Bore cap of approved standard make including cost and conveyance of all materials to work spot and all operational, incidental charges, labour charges etc., complete as directed by the site engineer. 180mm dia Cap

Providing Slotting charges for 175 /180 mm dia Blue PVC casing pipe of approved standard make including all labour charges, operational charges and conveyance to work spot etc., complete as directed by the Departmental Authorities.

Perforation Charges for 180mm dia PVC Casing Pipe including all labour charges, operational charges and conveyance to work spot etc., complete as directed by the Departmental Authorities.

Supply, delivery and fixing of 175mm 6Kgs/Sqm dia Blue PVC casing pipe of Finolex or any ISI approved make including cost and conveyance to work spot and all labour charges etc., complete as directed by the Departmental Authorities.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) OD 90 mm 8.0 kg/ sqcm

Supply of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) including cost of materials conveyance to work spot and all labour charges etc., complete as directed by the Departmental Authorities.

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ;. Makes: Lauritz Knudsen (formerly L&T) / C&S / SALZAR / HPL/ AEI / Meco / Rishab Ammeter Makes: Lauritz Knudsen (formerly L&T)/ C&S / SALZAR / HPL/ AEI / Meco / Rishab Single phase preventor Makes: Lauritz Knudsen (formerly L&T) / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: Lauritz Knudsen (formerly L&T) / Siemens / Schneider / Epcos/Havells .Voltmeter ; 0-500 V 96x96mm size 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Upto 7.5 HP with DOL Starter including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and Transportation of 5.00HP 25 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Water Supply and Plumbing for Toilet Blocks

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work in all respects:White Colour

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 380 mm including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply Delivery and fixing of 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm with necessary materials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement fixing with PVC Clamps with required number of Bombay Nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work at all floor levels as directed by the site engineer. for 75mm dia

Supply Delivery and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm with necessary materials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement fixing with PVC Clamps with required number of Bombay Nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work at all floor levels as directed by the site engineer. for 110mm dia

Supply delivery and fixing of 75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 75 mm dia - Single Tee - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 110 mm dia - Single Tee - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 75 mm dia - Vent Cowl - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 110 mm dia - Vent Cowl - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer. For 28.60mm ODPipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer. For 34.90mm ODPipe - SDR 13.5

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Florentine(Quarter turn) series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply & fixing towel rod (CP) of 24" long and 3/4 " dia including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg. including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supplying & fixing NP soap dish heavy type with NP SCREWS including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supply and fixing of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supply and Fixing of 50mm Nominal Bore GI Pipe "B" Class Medium Grade properties & Weight as per IS 1239 with GI Fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches with socket Tata of Zenith Make or department approved make etc., complete as directed by the site engineer.

External Electrification

Supply and transportation of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 300Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 240Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 185Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 70Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 50Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 25Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 16Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 10Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 4 core, 6 Sq mm ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 3 core, 4 Sq mm ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 3 core, 2.5 Sq mm ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 400 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 300 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 240 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 185 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 70 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 50 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 4 core x 16 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 4 core x 10 sq.mm

Lighting Protection System

Supply of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17- 102:2011, is made of high-quality, non-corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t = 30μs, Protection Radius ranging from 48 Meters in Level-I to 71 Meters in Level-IV when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current Impulses of 40kA (5 Shots of 8/20μs wave shape) and having capturing rod dia of 25mm. Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Installation and commissioning of advanced lighting protection systems which includes: 1. Laying of CC Bed 2. Installation of Lighting Rod 3. Laying of Down conductor 4. Installation of Counter 5. Installation of GI Mast with stay wire. 6. Termination of down conductor to earth bus etc., including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 6 Digit Electronic/Mechanical counter Make: EARTHPLUS (THUNDER GUARD) / NIMBUS /KALRE / FOREND including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and Installation of IEC 62561-7 compliant Eco-friendly, Maintenance free, anti-corrosive, lead- free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.12 ohms-meter, Sulphur Free, should be tested as per IEC-62561-7 for resistance Toxic Elements, Leachable elements etc. 25 Kg Bag Make: EARTHPLUS /CIRPROTEC /INDALAC /INGESCO, Supply of Bentonite Moisture Retaining Powder 30 Kg Bag, Supply of Concrete Earth Pit of Dimensions: Width: 320 mm, Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 5000 Kgs including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and Laying of Down Conductor of 1x70 Sqmm single core PVC insulated unarmoured copper conductor cable for voltage up to 1100V as per IS 694/1990 of ISI Mark Makes Polycab / Havells / RPG / RR Kabel including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Providing indipendent earthing by excavating a trench to a depth of 2.10Mtrs. in all soils, as per size specified in the Data, using 40mm dia."B" Class G.I.pipe of 2.50Mtrs. length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equel proportion of Salt and Charcoal in layers and all labour charges etc. complete for small quarters.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply Erection Testing and Commissioning of 32x6mm Copper Strip on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of 25x3mm GI Strip on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of 25x6mm GI Strip on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of 8SWG GI Wire on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of Cable root Indicators of size 152mm round / 102mm x 102mm /152mm x 152mm including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete

GI perforated cable tray

Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete (NB:Add 30% Extra for perforated cable tray with cover). ISI Make profab or its equivalent

300mm x 50mm x 1.6mm

600mm x 75mm x 2.0mm

Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required.

First aid box 18"x12"x8"

Danger Board in 3 languages English/Telugu/Hindi in red colour with 11KV marks shall comply with IS:2551-1982. 250x200mm,

Danger Board in 3 languages English/Telugu/Hindi in red colour with 440V marks shall comply with IS:2551-1982. 250x200mm,

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Supply of 2.2 TR, 5 star capable of delivering 26400 BTU/hr and above with operating on refrigerant R-410A / R-32 .INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation.Makes: Mitsubishi / O General / Toshiba (prevailing models in the market) including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

PART - I. ELECTRIFICATION OF TOILET BLOCKS

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan , common and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).

Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 25mm size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. make: Modi with ISI

Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard. Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge. Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.

Supply and run of 2 of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and Transportation of 12W Down Lighter, Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265 Volts AC, Power factor > 0.9 with LED's having efficacy of > 120 lumins/watt etc., complete with 3 years warranty with (BAJAJ 13898 BZSLO 12W WH LED DOVEE PRO) OR EQUALENT OF PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs."Luminaire Make : Phillips / GE / Crompton / VIN /Bajaj / Havells / Halonix.

Fixing of LED luminaire (Down lights / Mirror optic / Ornamental type fitting with all necessary accessories in false ceiling / on wall including giving connections and all labour charges etc., complete.

Supply of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air/Halonix /Polycab/ G.M. (Xenix)

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete

Supply and fixing of 20W,2000 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.

Supply and fixing of 8 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete. Incommer: 32A DP ELCB-1No. Outgoing: 10kA-6-32A SP MCBs - 6 Nos DB Makes : Legrand / Schneider. Isolator Make: Legrand-DX3 / Schneider-Acti9. MCB Make:Legrand-DX3 / Schneider-Acti9.

Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab

Labour charges for run of up to 50sqmm U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Collection and Supply of Gravel from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling,ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Tie BEAM / PLINTH BEAM)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for COLUMNS)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,Including centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Roof Beam)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges,on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, Including centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site enginee (For Roof slab 150mm thick Slabs)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for Sill Lintels)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class from approved Kiln Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using Common burnt clay bricks of Non-Modular of traditional size 23 x 11 x 7cm having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509

Providing Plastering with CM (1:5), 12mm thick single coat in CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding seigniorage charges, on all materials, Including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM 2 coats 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., excluding seigniorage charges on all materials. Complete for finished item of work as per ss and as directed by the site engineer.

Flooring with ceramic tiles,Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711,IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., excluding seigniorage charges,complete for finished item of work. including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing dadooing to walls glazed coloured tiles( glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs ) 1st quality of size approved by Engineer-in-charge set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spreading @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand, water etc.excluding seigniorage charges, complete for finished item of work.

Flooring with Multi Red Colour Granite 18 to 20 mm mm thick slabs other than black and regular colours set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, excluding the seigniorage charges on all materials including cost of all materials like cement, sand, water and tiles and etc., and also including labour charges for dressing of tiles ,cost and conveyance of all materials and all labour charges etc., complete for finished item of work as per ss and as directed by the site engineer.

Full Rounding the edges of Marble/Granite stone slabs of all thicknesses including polishing the same. Including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting to new walls with 2 coats of acrylic emulsion paintinterior grade having VOC (Volatile Organic Compound) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls .

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound ) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supplying & Installation of Toilet Cubical Systems with 12mm thick HPL Sheet partition walls with Doors and Accessories for Tiolets, the compartment should equiped with the following indicator lock, Door knob, Auto return Hinge, Coat Hook, Adjustable legs, Aluminium annozied items including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Pedestals )

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Manufacturing, supply, delivery and fixing of compound wall M.S. Grills with different sizes of angulars and square rods including cost of all materials, conveyance to the work spot and all labour charges welding cutting, bending, painting with redoxide paint and all fabrication charges etc. complete as per S.S and as directed by the departmental authorities.

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for New Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheet with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all materials and labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Supply of precast concrete blocks for paving of M -35 grade and thickness not less than 60mm for Light Traffic Areas confirming to IS 15658: 2006 in all shapes and designs as per the manufacturers specification and labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading and unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc., complete as per S.S. and as directed by the Departmental Authorities.

Flooring with Multi Red Colour Granite 18 to 20 mm mm thick slabs other than black and regular colours set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, excluding the seigniorage charges on all materials including cost of all materials like cement, sand, water and tiles and etc., and also including labour charges for dressing of tiles ,cost and conveyance of all materials and all labour charges etc., complete for finished item of work as per ss and as directed by the site engineer.

Suppy , Fixing and Installation of 24 Motionchairs with base each fitted with 4 nos. racing car seats comprising FRP shell and detachable cushions with removable hard wearing coverings for easy maintenance. Standard colour for shell and cushions: red, other colours are available. Base has pneumatic cylinders, controls and servo valves to provide 3DOF (degrees of freedom) of fast and exiting movement under programmed control and synchronized with the video film. Each base has: a flexible skirt; two grab handles and footrest per seat; air filter and regulator. SFX (special effects):In each seat – 1. Leg tickler 2. Neck blast 3. Towards front of rider (from back of seat in front, a separate bar provides this to front row of seats) - 4. Water surprise 5. Air blast

Special effects Wind by fans (2nos),Smoke machine, Bubble machine,Snow machine, Strobes(2 nos) Projection and Dynamic Vision 3D:2 nos BenQ or equivalent projectors each 5000 ANSI lumens, laser light source (20,000 hours life), WUXGA 1920 x 1200 Full HD 3D, DLP.Adjustable mounting frame and cabling.3D high gain Harkness screen with viewing area 4.8 x 2.7m with mounting frame.Polarising (circular) filters for projectors. Polarising (circular) specs for viewers with Ultrasonic cleaner for maintaining and sterilizing 3D specs. ( 30nos 5:1 Sound system:Speakers: Premierworld® or AhujaMain speakers 2nos.Centre speaker 1 no.Rear speakers 2 nos Sub woofer 1 no.Amplifiers: Crown or equivalent total 2100w RMS.Cabling - 1 lot Control and electricals:Self contained electrical panelComputer based control system (Windows Operating system). Monitor, keyboard and mouse. UPS for control system.Cabling to each Motionchair™ base.Power requirement – 380v 3ph 50Hz 18Kw. including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply, Delivery, Installation, testing, and commissioning of a floor fountain consisting of in-ground jets as self-contained units, each comprising brass nozzles, stainless steel (SS 304) solenoid valves, and 21-watt RGB LED lights, all mounted on an SS 304 plate and encapsulated within an SS 304 shell. The shell shall be embedded in the ground so that the plate and nozzle tip remain flush with the floor surface. The scope includes a set of 24 such jet units, two 3 HP mono submersible pumps with suction strainers, one indoor-type electrical panel with a stand-alone dongle, one control panel for solenoid valves and LED lights, one water level sensor, and all required cabling for pumps, valves, and lights. It also includes complete programming of the fountain system. All works shall be carried out as directed by the departmental Authorities

Bore Well and Pump Set

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc., Drilling of Bore well of 200/225/300 mm dia for insertion of pipe dia of 100/125 mm

Supply and Fixing of PVC Bore cap of approved standard make including cost and conveyance of all materials to work spot and all operational, incidental charges, labour charges etc., complete as directed by the site engineer. 180mm dia Cap

Providing Slotting charges for 175 /180 mm dia Blue PVC casing pipe of approved standard make including all labour charges, operational charges and conveyance to work spot etc., complete as directed by the Departmental Authorities.

Perforation Charges for 180mm dia PVC Casing Pipe including all labour charges, operational charges and conveyance to work spot etc., complete as directed by the Departmental Authorities.

Supply, delivery and fixing of 175mm 6Kgs/Sqm dia Blue PVC casing pipe of Finolex or any ISI approved make including cost and conveyance to work spot and all labour charges etc., complete as directed by the Departmental Authorities.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) OD 90 mm 8.0 kg/ sqcm

Supply of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) including cost of materials conveyance to work spot and all labour charges etc., complete as directed by the Departmental Authorities.

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ;. Makes: Lauritz Knudsen (formerly L&T) / C&S / SALZAR / HPL/ AEI / Meco / Rishab Ammeter Makes: Lauritz Knudsen (formerly L&T)/ C&S / SALZAR / HPL/ AEI / Meco / Rishab Single phase preventor Makes: Lauritz Knudsen (formerly L&T) / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: Lauritz Knudsen (formerly L&T) / Siemens / Schneider / Epcos/Havells .Voltmeter ; 0-500 V 96x96mm size 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Upto 7.5 HP with DOL Starter including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and Transportation of 5.00HP 25 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Water Supply and Plumbing for Toilet Blocks

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work in all respects:White Colour

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 380 mm including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply Delivery and fixing of 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm with necessary materials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement fixing with PVC Clamps with required number of Bombay Nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work at all floor levels as directed by the site engineer. for 75mm dia

Supply Delivery and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm with necessary materials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement fixing with PVC Clamps with required number of Bombay Nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work at all floor levels as directed by the site engineer. for 110mm dia

Supply delivery and fixing of 75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 75 mm dia - Single Tee - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 110 mm dia - Single Tee - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 75 mm dia - Vent Cowl - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 110 mm dia - Vent Cowl - UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply delivery and fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer. For 28.60mm ODPipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer. For 34.90mm ODPipe - SDR 13.5

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Florentine(Quarter turn) series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supply & fixing towel rod (CP) of 24" long and 3/4 " dia including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg. including cost and conveyance of all materials to work spot and all labour charges etc., complete for finished item of work as directed by the site engineer.

Supplying & fixing NP soap dish heavy type with NP SCREWS including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supply and fixing of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials to work spot and all labour charges etc., as directed by the site engineer.

Supply and Fixing of 50mm Nominal Bore GI Pipe "B" Class Medium Grade properties & Weight as per IS 1239 with GI Fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches with socket Tata of Zenith Make or department approved make etc., complete as directed by the site engineer.

External Electrification

Supply and transportation of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 300Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 240Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 185Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 70Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 50Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 25Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 16Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and transportation of 10Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 4 core, 6 Sq mm ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 3 core, 4 Sq mm ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 3 core, 2.5 Sq mm ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Polycab / RPG / Finolex / Havells / Department approved Make including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 400 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 300 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 240 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 185 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 70 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 3.5 core x 50 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 4 core x 16 sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: Dowels /Comet / SMI including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities. For 4 core x 10 sq.mm

Lighting Protection System

Supply of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17- 102:2011, is made of high-quality, non-corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t = 30μs, Protection Radius ranging from 48 Meters in Level-I to 71 Meters in Level-IV when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current Impulses of 40kA (5 Shots of 8/20μs wave shape) and having capturing rod dia of 25mm. Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Installation and commissioning of advanced lighting protection systems which includes: 1. Laying of CC Bed 2. Installation of Lighting Rod 3. Laying of Down conductor 4. Installation of Counter 5. Installation of GI Mast with stay wire. 6. Termination of down conductor to earth bus etc., including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply of 6 Digit Electronic/Mechanical counter Make: EARTHPLUS (THUNDER GUARD) / NIMBUS /KALRE / FOREND including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and Installation of IEC 62561-7 compliant Eco-friendly, Maintenance free, anti-corrosive, lead- free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.12 ohms-meter, Sulphur Free, should be tested as per IEC-62561-7 for resistance Toxic Elements, Leachable elements etc. 25 Kg Bag Make: EARTHPLUS /CIRPROTEC /INDALAC /INGESCO, Supply of Bentonite Moisture Retaining Powder 30 Kg Bag, Supply of Concrete Earth Pit of Dimensions: Width: 320 mm, Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 5000 Kgs including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and Laying of Down Conductor of 1x70 Sqmm single core PVC insulated unarmoured copper conductor cable for voltage up to 1100V as per IS 694/1990 of ISI Mark Makes Polycab / Havells / RPG / RR Kabel including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Providing indipendent earthing by excavating a trench to a depth of 2.10Mtrs. in all soils, as per size specified in the Data, using 40mm dia."B" Class G.I.pipe of 2.50Mtrs. length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equel proportion of Salt and Charcoal in layers and all labour charges etc. complete for small quarters.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply Erection Testing and Commissioning of 32x6mm Copper Strip on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of 25x3mm GI Strip on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of 25x6mm GI Strip on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of 8SWG GI Wire on surface for connections including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply Erection Testing and Commissioning of Cable root Indicators of size 152mm round / 102mm x 102mm /152mm x 152mm including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the departmental authorities.

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete

GI Perforated cable tray

Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete (NB:Add 30% Extra for perforated cable tray with cover). ISI Make profab or its equivalent

300mm x 50mm x 1.6mm

600mm x 75mm x 2.0mm

Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required.

First aid box 18"x12"x8"

Danger Board in 3 languages English/Telugu/Hindi in red colour with 11KV marks shall comply with IS:2551-1982. 250x200mm,

Danger Board in 3 languages English/Telugu/Hindi in red colour with 440V marks shall comply with IS:2551-1982. 250x200mm,

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Supply of 2.2 TR, 5 star capable of delivering 26400 BTU/hr and above with operating on refrigerant R-410A / R-32 .INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation.Makes: Mitsubishi / O General / Toshiba (prevailing models in the market) including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

PART - I. ELECTRIFICATION OF TOILET BLOCKS

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan , common and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).

Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 25mm size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. make: Modi with ISI

Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard. Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge. Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.

Supply and run of 2 of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and run of 2 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.

Supply and Transportation of 12W Down Lighter, Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265 Volts AC, Power factor > 0.9 with LED's having efficacy of > 120 lumins/watt etc., complete with 3 years warranty with (BAJAJ 13898 BZSLO 12W WH LED DOVEE PRO) OR EQUALENT OF PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs."Luminaire Make : Phillips / GE / Crompton / VIN /Bajaj / Havells / Halonix.

Fixing of LED luminaire (Down lights / Mirror optic / Ornamental type fitting with all necessary accessories in false ceiling / on wall including giving connections and all labour charges etc., complete.

Supply of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air/Halonix /Polycab/ G.M. (Xenix)

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete

Supply and fixing of 20W,2000 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.

Supply and fixing of 8 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete. Incommer: 32A DP ELCB-1No. Outgoing: 10kA-6-32A SP MCBs - 6 Nos DB Makes : Legrand / Schneider. Isolator Make: Legrand-DX3 / Schneider-Acti9. MCB Make:Legrand-DX3 / Schneider-Acti9.

Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab

Labour charges for run of up to 50sqmm U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @18%

2. Provision for NAC @0.10%

3. Provision for Seigniorage Charges

4. Provision for DMF 30% on Seigniorage Charges

5. Provision for Merit 2% on Seigniorage Charges