ADDN/ ALTN TO THE BOUNDARY WALL WITH SWAN NECK FENCING ALONGWITH PERIMETER SECURITY LIGHT AT 270 FD WKSP COY EME IN NORTHERN SECTOR OF KOTA MIL STN

Amount

Excavating over areas, not exceeding 1.5m deep and getting out in any type of soil etc, complete all as specified and directed

Excavating over areas, 1.5m to 3.00m deep and getting out in any type of soil etc, complete all as specified and directed

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for laying of cables, poles/ stays and struct etc not exceeding 10sq m on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm etc complete all as specified and directed

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc, complete all as specified and directed

Supply, Laying, Commissioning, Jointing and testing LT underground cables, 1100 volts grade, XLPE insulated, heavy duty armored cable with multi stranded aluminium conductors, IS-7098 laid in trenches, ducts / fixed on poles / walls / laid under roads / paths / drains / culverts or encased in GI pipe complete all as specified an directed of following size : (a) size 10 Sqmm, 2 core

M&L for sand cushioning in trenches for cushioning of LT UG cable including spreading, levelling, well ramming in layers complete all as specified and directed.

Supply and fix sub class 'B' bricks of old size for cable protection in trenches laid flat and gap between two adjacent bricks shall not exceeds 10mm complete all as specified and directed.

Supply and fixing street light GI bracket made out of 40mm dia GI pipe medium grade, 1.20 metre long, bend to shape as required at site including MS clamp, nut bolts etc complete all as specified and directed.

M&L for PVC inslulated single core multistranded copper cable of size 1.5 sqmm unsheathed, 1100 volts grade drawn through counduit / cassing capping in surface / pole etc complete all as specified and directed

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing with toughened glass and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S&F terminal box made of PVC Box fix on pole by means of mild steel clamps with bolt and nuts, provn for cable entry for incoming and outgoing including MCB 6-32-1 Nos and 4 way conncetctor -01 Nos Apms necessary connection duly fixed with and including cable glands threaded type IP 65 made of polymide with lock nut etc complete all as specified and directed.

Supply, transportation, erection & install steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) including drilling holes and two coats of aluminium paint over a coat of red oxide primer outside of pole including 3 nos band / strap with red post office box colour (300mm wide each) at a distance 300mm from plinth block and marking pole number with black synthetic enameled paint including tarring one coat on steel surface embedded in concrete etc complete all as specified and directed

M&L PCC (1:4:8) type D.2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and directed

M&L PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and directed

S&F 40mm bore galvanised steel tubing light grade for protection of cable on poles / walls under road crossing etc conforming to IS-1239 etc, complete all as specified and directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified & directed

Removing excavated material (soils) to a distance exceeding 250M and not exceeding 500 m and depositing where directed, complete.

M&L Reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc, complete all as specified and directed

M&L for Reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over1.5m span etc, complete all as specified and directed

M&L for Reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc, complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 etc, complete all as specified and as directed.

M&L for formwork to flat rough finished surface of sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter for flat rough finished surface of concrete etc, complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams of flat rough finished surface etc, complete all as specified and as directed

M&L for form work to sides of pillars, posts, struts, piers, column and stanchion rough finished square, rectangular surface etc, complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) complete all as specified and directed

All as per item No. 45 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and biders etc.

M&L for rendering 10mm thick in CM 1:6 and 5mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc and using water proofing compound etc, complete all as specified and as directed

M&L for rendering 10mm thick in CM 1:6 and 5mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc and taking down old plaster, raking out joints, hacking for key, scrubbibg down with water etc, complete all as specified and as directed

M&L for Preparing new plastered surfaces and applying two coats of cement base paint on wall over a coat of alkali resistant primer etc, complete all as specified and directed

S&F mild steel angle sections as in posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc (for securing chain link fencing) including all necessary nut bolts, riveting etc and similar work confirming to Fe-410-0 Gde- or Fe 310-0 etc complete all as specified and directed.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) etc complete all as specified and directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 110 mm etc, complete all as specified and directed

M&L for preparation new Steel Surfaces of any description, over 10cm in width or girth, not otherwise described applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M&L for Cutting holes in stone walls built in Cement Mortar exceeding 150 sqcm but not exc 400 sq cm including making good to disturbed portion in CM (1:3) or PCC (1:2:4) type BI as required complete all as directed.

Pioneer Enterprises (BID ID -3110969)

M/s Prem Associates (BID ID -3119237)

B B BUILDERS (BID ID -3119331)