C/O 50 Bedded Hospital at Dadasiba in Tehsil Dada Siba, Distt Kangra (HP) (SH- Providing E.I there in)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus).

Group C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus).

Group C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI,Anchor,L&T ).

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI,Anchor,L&T ).

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI,Anchor,L&T ).

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Make:-KEI,Anchor,L&T )

2x2.5 Sq. mm.

2x6 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI,Anchor,L&T )

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI,Anchor,L&T )

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Make:-KEI,Anchor,L&T )

3x1.5 Sq. mm.

3x2.5 Sq. mm.

3x4 Sq. mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-(Makes: Diplast, BEC, Finolex.)

25 mm. dia

50 mm. dia

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

6 modules(205mmx78mmx50mm)

12 modules (205mmx135mmx60mm)

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

5 pin, 5/ 6 Amps Modular socket outlet.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.(Make:Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.(Make:Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Makes:- L&T/Anchor/Philips.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.Makes:- L&T/Legrand/Schneider.

100 Amp. -10 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Makes:- L&T/Legrand/Schneider.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Triple pole & Neutral. Cat-A.

Makes:- L&T/Legrand/Schneider.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way

Double door-12 way

Double door-16 way

Makes:- L&T/Legrand/Schneider.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Exhaust Fan, Heavy duty, 300 mm sweep

Makes: Usha,Bajaj,Crompton or any other approved make.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and fixing H.T.danger notice plate of 250mm x 200mm made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run).

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run).

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 500 sq. mm (3.5 core)

Makes:- KEI/Havell/Plaza.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Armoured cable 400 sq. mm (3.5 core)

Armoured cable 500 sq. mm (3.5 core)

Makes:- KEI/Havell/Plaza.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 Liter capacity water heater (Cat-A)

Makes: Bajaj,Racold,Crompton or any other approved make.

Providing and fixing LED Mirror Light 10Watts, 2 Feet long following rating with the pressure die casting aluminum housing complete with all accessories,including making connections,testing and commissioning etc.as required complete in all respects.

Makes: Havell 10 Watt (LUMILINEPLUSBS10WLED865SPCSS) /Philips/Panasonic or equivalent.

Providing and fixing surface mounted Square/Round downlighter with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 20 watt (2000 Lumen) 4000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

LED Surface mounting Square/Round downlighter 20 watt

Makes: Panasonic(Cat No PDLM10204BS),Bajaj,Wipro,Philips or any other approved make.

Providing, Installation, testing and commissioning of ceiling fan with two module modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Makes:-Usha Technix Plus 3 Star Rating,Striker, Bajaj,Crompton or any other approvred make.

Providing and fixing indoor decorative aluminium extruded LED Batten including tube rod 20 watt and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

Batten for T8 Tube Light with tube rod

Makes:- Bajaj (Cat. No. BLRB DB 118 ),Tube rod(Cat. No.BLRB 20W CWi) ,Havells, Wipro or any approved make

Providing and fixing indoor decorative aluminium extruded LED Batten including tube rod 40 watt and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

Batten for T8 Tube Light with tube rod

Makes:- Bajaj (Cat. No. BLRB DB 118 ),Tube rod(Cat. No.BLRB 20W CWi), Havell, Wipro or any approved make.

Providing and fixing Bed Light 14 Watts with the pressure die casting aluminum housing complete with all accessories,including making connections,testing and commissioning etc.as required complete in all respects.

LED Bed Light 14 Watts

Makes:- Decon(GD-hd(L)0199)/Philips/Panasonic or any other approved by Engineer-in-Charge.

Providing and fixing LED Bulk head of following rating made of aluminium housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

LED Bulk head fitting 10 watt

Makes:- Philips,Panasonic(Cat No.-PBHM01107),Bajaj ,Wipro or any other approved by Engineer-in-Charge.

Providing and fixing surface mounted power coated white CRCA full glow LED panel 1'X4' suitable for surface application and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

Surface mounted power coated white CRCA full glow Panel 36 Watt-1'X4'

Makes:-Wipro (Cat. No. CRC013R036HP57GL1),Bajaj,Philips,Panasonic,Wipro or any other approved make.

Providing and fixing surface mounting LED 2X2 luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for surface application with the use of the latest technology 36 watt (3600 Lumen) 5700K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

Surface mounting 2X2 Flat Panel

Makes: Wipro (Cat No CRC010S038HP57GL1 ),Bajaj,Panasonic,Philips or any other equivalent approved make.

Supplying and fixing Power unit 25 Amps.switch & one no. socket modular type including the modular box , complete with connections, testing and commissioning etc. as required.

Make:- ABB, L&T, Legrand ( As Per Legrand Cat No. 673016) or any other approved make.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 Pole MCB incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-8+2 way, 8+6+24 modules

Makes:- Hager (Cat No: VYP08DH),Havells,L&T or any other approved make.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 Pole MCCB incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-12+2 way,MCCB+6+36 modules

Makes: Hager (Cat No:- VYP12DM),Havells,L&T or any other approved make.

Supplying and fixing of Rubber mat 1X2 Mtrs long and 12 mm thick in the front of Main panel etc. as required including carriage of material with in all leads and lifts.

Makes:- KSB Electric Co./Tricolite/ISPL

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G, Base Frame Angle 50mmX50mmX5mm duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)1450MM X (W)1900MM X (D)450MM and Assembly Charges of 630A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

MATERIAL:

OUTGOING :

MCCB 400A 4P 36KA TMR With O/L & S/C Protection-1 No.,Spreader Link MCCB 400A 4P-2 Nos.,MCCB 200A 4P 36KA TMR With O/L & S/C Protection-1 No.,Spreader Link MCCB 200A 4P-2 Nos, MCCB 100A 4P 36KA TMR With O/L & S/C Protection -3 Nos.,Spreader Link MCCB 100A 4P-6 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized Lighting Panel made out of M.S. CRC Sheet 16G, Base Frame Angle 50mmX50mmX5mm duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)1300MM X (W)1450MM X (D)350MM and Assembly Charges of 200A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to O.L.C.O.S./MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

MATERIAL:

OUTGOING :

MCCB 125A 4P 25KA TMR With O/L & S/C Protection-2 Nos.,Spreader Link MCCB 125A 4P-2 Nos.,MCCB 63A 4P 25KA TMR With O/L & S/C Protection-1 No.,Spreader Link MCCB 63A 4P-2 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G, Base Frame Angle 50mmX50mmX5mm duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)1100MM X (W)1500MM X (D)400MM and Assembly Charges of 400A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

MATERIAL:

OUTGOING :

MCCB 200A 4P 25KA TMR With O/L & S/C Protection-2 Nos.,Spreader Link MCCB 200A 4P-4 Nos.,MCCB 100A 4P 25KA TMR With O/L & S/C Protection-1 No.,Spreader Link MCCB 100A 4P-2 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)700MM X (W)500MM X (D)200MM and Assembly Charges of 63A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

INCOMER:

MAIN INCOMER :-MCCB 63A 4P 25KA TMR With O/L & S/C Protection -1 Nos.,Spreader Link 63A 4P-2 Nos.,Control SP MCB 6A -3 Nos., Phase indicating Lamp-3 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)700MM X (W)500MM X (D)200MM and Assembly Charges of 125A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

INCOMER:

MAIN INCOMER :-MCCB 125A 4P 25KA TMR With O/L & S/C Protection -1 Nos.,Spreader Link 125A 4P-2 Nos.,Control SP MCB 6A -3 Nos., Phase indicating Lamp-3 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)700MM X (W)500MM X (D)200MM and Assembly Charges of 100A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

INCOMER:

MAIN INCOMER :-MCCB 100A 4P 25KA TMR With O/L & S/C Protection -1 Nos.,Spreader Link 100A 4P-2 Nos.,Control SP MCB 6A -3 Nos., Phase indicating Lamp-3 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)1000MM X (W)700MM X (D)250MM and Assembly Charges of 200A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB ./MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA or approved Equivalent make).

INCOMER:

MAIN INCOMER :-MCCB 200A 4P 25KA TMR With O/L & S/C Protection -1 Nos.,Spreader Link 200A 4P-2 Nos.,Control SP MCB 6A -3 Nos., Phase indicating Lamp-3 Nos.

OUTGOING :

MCCB 63A 4P 25KA TMR With O/L & S/C Protection-1 Nos.,Spreader Link MCCB 63A 4P-2 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying and fixing LED lamp 9 watts on the existing batten holder/Fancy wall bracket as required complete in all respects.

Makes:-Bajaj/Philips/Panasonic

Providing and fixing LED Recess type 2X2 luminaire to enhance the delight of occupants with comfortable experience through its classic design and glare free soft illumination ,suitable for surface application with the use of the latest technology 36 watt (3600 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

Recess type 2X2 Flat Panel

Makes: Wipro (Cat No CRC010R038HP57GL1 ),Bajaj,Panasonic,Philips or any other equivalent approved make.

Providing and fixing Recess type Round downlighter with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 20 watt (2000 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

LED RecessType Round downlighter 20 watt

Makes: Panasonic(Cat No PPAM11206BS),Bajaj,Wipro,Philips or any other approved make.

Providing and fixing Recess type Round downlighter with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 15 watt (1500 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (with 5 year warranty)

LED RecessType Round downlighter 15 watt

Makes: Panasonic(Cat No PPAM11156BS),Bajaj,Wipro,Philips or any other approved make.

UNITED ENGINEEER AND CONTRACTOR