Electrification work of parking for vehicles in Baman Naula Krishnapuri ward at Pithoragarh city.

Amount

.Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc.as

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable insurface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

same as item no 3 but 2 x 4 sq. mm + 1 x 4 sq. mm earth wire

same as item no 3 but 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

same as item no 3 bu t4 X 6 sq. mm + 2 X 6 sq. mm earth wire

same as item no 3 but 4 x 10 sq. mm + 2 x 10 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1X1.5 sqmm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amp switch

S/F 3 pin 5/6 A socket outlet modular

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and flxing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, Gl alongwith modular base & cover plate for modular switches in recess etc. as required 6 Module (200mmX75mm)

Supplying and flxing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc.as required

Supplying and flxing brass batten/angle holder including connection etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

s/f 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker inthe existing MCB DB complete Single pole

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.63 A

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 AMP

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and The MCCB's shall be complete with suitable cable end boxes,compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.Incoming 100 Amp MCCB -1 No Outgoing 63 Amp. MCCB-2 Nos.

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.

Supply and fixing of recess/surface mounting round 24 to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set complete in all respect.

Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect.

S&F of 40 Amp. TP MCB (10 KA) C Curve

S&F of 63 Amp. TP MCB (10 KA) C Curve

S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic release

Making hole in the wall for exhaust fan and finishing properly complete in all respect.

S/l of 1800mmx900x12mm thick chequered rubber matting

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 150 sq. mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 400 sq. mm 3-1/2 core

S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.

Supply and fixing of fire extinguisher ,ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

S/F 1200 mm ceilling fan app make complete in all respect, bajaj anchor luminius khetan

s/f of led lamp 10 watt of havells make

S/F exhoust fan mettalic 230 mm app make (light duty) bajaj anchor luminius khetan make

5MP IP Full HD Bullet & Dome Camera , IR & Face detection CMOS Sensor. 5MP Resolution @ 2560×1920) 3.6mm HD Lens (6mm, 8mm Optional) 2-Warm Light LED / up to 20- 30Mtr

NVR 32 4 K ,1 Sate Port MADE IN India. SPECIFICATION ... S-NVR-2.32ch. 1 ch. 1 ch, resolution: K(3840x2160)/30Hz 1920x1080/60HZ 1440x900/60Hz

6 TB HDD Surveillance 210 Megabytes Per Second

POE Network Switch 8 Port Dual Gigabit Power Adapter Voltage : AC 110V-240V ; Consumption : 120W(52V 2.3A) ; PoE Ethernet Port : 1-8 port:10/100Mbps ; Ethernet Port

POE Network Switch 4 Port Dual Gigabit Power Adapter Voltage : AC 110V-240V ; Consumption : 120W(52V 2.3A) ; PoE Ethernet Port : 1-8 port:10/100Mbps ; Ethernet Port

2 U Rack Whether Proof Rack

4 U Rack Whether Proof Rack

CAT 6 Cable (1 Box 305 Meter) Category : 6 UTP Solid cable, conductor Meta : Conductor Meta : Bare Copper, OD : 6.1mm ±0.2 Capacitance Unbalance : 330pF/100m Conductor : Conductor : 23 AWG (Solid), Insulation Material : HD-PE

55 inch LED TV Screen Size - 55 inches Resolution- FHD 1080p

Eclectic Equipment Power Socket , Power Supplely Board, Cable ETC

D-Link RJ45 Connector RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors of 100pcs/Pack

Camera Installation

Supply, erection, testing & commissioning of Diesel Engine driven pump,horizontal centrifugal type, suitable for automatic operation. The duty parameters of pumps shall be 2280 LPM at 70 MWC. The pump shall be coupled with radiator cooled diesel engine of speed 1800 RPM with auto starting mechanism and shall be equipped with other accessories as required including fuel tank(fabricated from 3 mm MS sheet, painted with two coates of synthetic enamel paint over a coat of primer) of capacity adequate to sustain continuous pump operation for 2 hours. The tank shall be fitted with magnetic oil level indicator, MH with cover, drain valve,air vent including structural support etc. Necessary battery to be supplied along with the diesel engine. Pump shall have C.I. casing, bronze peller(dynamically balanced), SS-410 shaft with gland pack. Other accessories like common base frame, foundation bolts, flexible coupling,coupling guards etc to be supplied along with the pumps.The pump should be factory fitted on common

Supply, erection, testing & commissioning of electric motor driven Jockey Pump, vertical inline type, suitable for operation on 415 volts ±10%, 3phase, 50 Hz AC supply. The duty parameter of jockey pump shall be 180LPM at 70 MWC. The pump shall coupled to squirrel cage induction motor, TEFC type having suitable KW with speed of 2900 RPM. The pump components shall made of stainless steel with gland pack arrangement. Necessary accessories with foundation bolts etc to be supplied to complete the erection. Foundation required to erect the pump shall be of owner's scope

Supply, erection, testing & commissioning of compartmentalised common control panel for diesel engine driven pump and Jockey Pump.The Panel should have Auto Battery Charger. All components shall be housed in a common cubicals made of 16 swg. M.S. sheet with required stiffners(if required). The panel shall be powder quoted of approved colour both inside and out side. The panel shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height.

Supply, laying, testing & commissioning of PVC outer sheath, steel armoured,copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls /floors etc as required. Cables laid out doors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth. 10C x 1.5 sq.mm YFY for Diesel pump

Supply, laying, testing & commissioning of PVC outer sheath, steel armoured,copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls /floors etc as required. Cables laid out doors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth.3C x 6 sq.mm YFY for Jockey Pump

Supply, laying, testing & commissioning of PVC outer sheath, steel armoured,copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls /floors etc as required. Cables laid out doors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth.2C x 1.5 sq.mm for instrumentation

GI earthing strips of 50mm x 6mm thick, strips shall run on floor / ceiling / walls, from pump to control panel with necessary accessories as required

25 Sq.mm single core multistrand copper cable shall be run on floor /ceiling / walls, from the nearest earth bar to the pump control panel with necessary accessories as required

Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set and other accessories

Supply and installation of Pressure switches, SPDT type, of suitable range for pump sets and other accessories

Erection, fabrication, testing of MS black steel pipe "B" class conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges,reduces clamps, MS support dash fasteners etc. Painting to be done with two coats of approved red oxide primer and two coats of approved red enamel paint. Pipes shall be laid over ground duly welded including cutting and making good the walls, floors or any other surface.200 mm NB x 6 mm thk

Erection, fabrication, testing of MS black steel pipe "B" class conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges,reduces clamps, MS support dash fasteners etc. Painting to be done with two coats of approved red oxide primer and two coats of approved red enamel paint. Pipes shall be laid over ground duly welded including cutting and making good the walls, floors or any other surface.150 mm NB

Erection, fabrication, testing of MS black steel pipe "B" class conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges,reduces clamps, MS support dash fasteners etc. Painting to be done with two coats of approved red oxide primer and two coats of approved red enamel paint. Pipes shall be laid over ground duly welded including cutting and making good the walls, floors or any other surface.100 mm NB

Erection, fabrication, testing of MS black steel pipe "B" class conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges,reduces clamps, MS support dash fasteners etc. Painting to be done with two coats of approved red oxide primer and two coats of approved red enamel paint. Pipes shall be laid over ground duly welded including cutting and making good the walls, floors or any other surface.80 mm NB

Erection, fabrication, testing of MS black steel pipe "B" class conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges,reduces clamps, MS support dash fasteners etc. Painting to be done with two coats of approved red oxide primer and two coats of approved red enamel paint. Pipes shall be laid over ground duly welded including cutting and making good the walls, floors or any other surface.50 mm NB

Erection, fabrication, testing of MS black steel pipe "B" class conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges,reduces clamps, MS support dash fasteners etc. Painting to be done with two coats of approved red oxide primer and two coats of approved red enamel paint. Pipes shall be laid over ground duly welded including cutting and making good the walls, floors or any other surface.25 mm NB

Supply,Installation, testing & commisssioning of CI Non return Valve as per (PN10 rating) with matching flanges, nuts & boltsSize 150 mm NB

Supply,Installation, testing & commisssioning of CI Non return Valve as per (PN10 rating) with matching flanges, nuts & boltsSize 80 mm NB

Supply, Installation, testing & commissioning of Butterfly Valve as per (PN10 rating) complete including matching flanges, nuts & bolts.Size 150 mm NB

Supply, Installation, testing & commissioning of Butterfly Valve as per (PN10 rating) complete including matching flanges, nuts & boltsSize 80 mm NB

Supply,Installation, testing & commisssioning of CI Foot valve with StraineSize 200 mm NB

Supply,Installation, testing & commisssioning of CI Foot valve with StraineSize 80 mm NB

Supply & installation of SS 4 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet with built in check valve for fire brigade connection to fire reservoir (IS : 904).

Supply & installation of SS Fire Brigade Draw out connection with necessary foot valve (150NB) for reservoir.

Priming arrangement of 500ltrs capacity for negative suction to be provided by the erection vendor including necessary tank and other structural support. Valves required are indicated elsewhere.

1 Supply, erection and testing of "B" class pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets,GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope150 mm NB

1 Supply, erection and testing of "B" class pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets,GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope80 mm NB

1 Supply, erection and testing of "B" class pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets,GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope50 mm NB

1 Supply, erection and testing of "B" class pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets,GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope25 mm NB

Supply, installation, testing & commissioning of CI Butterfly valve as per BS :5155 (Wafer type) with matching flanges,nuts & bolts and gasket. 150NB

Supply and installation of Ball Valves in Bronze Construction to IS: 778 with screwed ends 25 NB size

Supply, installation of automatic 25 NB Air Release Valve

Supply & installation of SS oblique type single headed hydrant valve with 80 mm inlet and 63 mm outlet SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts

Supply & installation of SS branch pipe with 20 mm nozzle conforming to IS : 903.

Supply & installation of 63 mm dia reinforced rubber line hose pipe in 15 m length conforming to IS : 636 Type A ISI marked with SS male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG SS wire.

Supply & installation of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. Supply & installation of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm)

Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer.The length of hose shall be with 30 m with 20 mm dia. Working pressure rating shall be 18 kg/sq. The pipe shall be coupled with brass self closing shut – off nozzle of 5 mm outlet

Connecting pipe of hose reel drum with all assesories

Supply & installation of SS 3 way Fire Brigade Inlet with 63 mm dia instantaneous type coupling and 150 dia flanged outlet. Each inlet coupling shall be with built in check valve. The inlets shall conform IS:904.The inlet connection shall be mounted at the base of riser

Supply & installation of dial type Pressure Gauge of suitable pressure range,fitted with dampner arrangement and isolation ball valve as shown in respective drawing. The diameter of dial shall be 150 mm preferably filled up with glyserine.All other necessary fittings to be supplied to erect the gauge on top of the riser.

S&F of 100 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 sq. mm 3-1/2 core

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline onductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

DC EV CHARGER 40KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 2 AC input voltage: AC380V±15% AC input frequency: 45-65Hz DC output power: 40KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 0-133 Amp Connectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/WIFI *OCPP 1.6 *7-inch LCD screen/LED light

Doon Fire Services