REPAIR TO BOUNDARY WALL, FENCING, AREA DRAINAGE, GATE AND CERTAIN MISC ITEMS AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI

Amount

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish outside defence land as directed by the Engineer in Charge.

M&L PCC 1:3:6 type C-2 (Using 40 mm graded stone aggregate) as in bed of Compound wall complete all as specified and as directed.

Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed.

M & L brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:4) using old size bricks completeas in manholes etc all as specified and as directed.

Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M& L Providing cement concrete in Type B0 1:2:4 (12.5 mm graded stone aggregate) as in copings, water throughs and the like including weathering, slightly rounded or chamfered angles andf throating complete all as spcifiecd .

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4), on brick surfaces finished even and fair wituout using extra cement complete all as specified and directed.

M&L for preparation of newly plastered walls, and applying two coats of cement based wall care putty each coat of 1 mm thick complete all as specified.

M&L for applying two coat of antifungal exterior acrylic emulsion (1st quality) over damp proof primer. of wall including cornices, pillasters and other wall feathers etc by washing rubbing down and stopping complete all as specified.

Dismantling Structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S & F Mild steel work in ornamental and intricate design framed and hung gates, including Pintle hinges, stops, hand made sliding bolts etc. and similar work confirming to Fe 290 Gde - E - 165 complete all as specified and directed.

S & F Mild steel work in framed work such as in gates,grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.complete all as specified and directed.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed.

S&F in repair Stainless Steel polished Letters of grade 304, 2 mm thick fixed to wall cladding in suitable arrangement and height of each letter not less than 30 CM ) complete all as specified and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises.

M & L for 18 to 20 mm thick Granite (of any type) of approved shades, machine cut (table rubbed and polished) in Cladding, Gate pillars, walls etc including Edges grinding,half round, full round as required cement morar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including cutting and polishing etc complete.

M & L for glazed ceramic colour tiles 450X300X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved by Engr-in-Charge including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Reinforced Cement Concrete 1:1.5:3 in foundations, Footings,Plinth beamsincluding rafts, and in mass concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete 1:1.5:3 design mix in Columns, Pillars,piers, posts and struts complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.complete all as specified and directed.

Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Form work to fair finished surfaces sides of Pillars,posts,struts,columns and stanchions of Square, rectangular or polygonal. complete all as specified and directed.

Form work to rough finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and directed.

M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and similar work all as specified and as directed.

M & L precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as directed by Engr- in- Charge .(Note :- Reinforcement shall be measured and paid separately)

M&L for cleaning/de-silting of lose mud, rubbish etc from drain bed including uprooting of vegetative growth throughly and wire brushing including flushing with water so as to achieve smooth flow of water in drain of bed width up to 60 cm (soil mud up to 10 cm depth and removing upto 50m and depositing in low laying area)etc complete all as directed by Engineer in charge.

M&L PCC 1:2:4 type C-2 (Using 40 mm graded stone aggregate) as in surface channel and saucer drains finished even & Smooth using extra cement complete all as specified and as directed.

M & L extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped end all as specified and as directed.

Add or deduct for each 25mm girth or part there fore over or under 30cm ditto.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Mild steel round bar 10mm dia and over cut to length,bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia

S & F in repair 300mm dia bore Reinforced concrete pipes ,class NP-3,laid and jointed complete with collars complete all as specified and as directed.

S & F in repair 450mm dia bore Reinforced concrete pipes ,class NP-3,laid and jointed complete with collars complete all as specified and as directed.

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., complete all as specified and as directed.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0W (Gde E-250) quality A complete all as specified and as directed.

M/S MOHAN KUMAR BANSAL

samrat saw mill and joinery workshop

M/s. R.K. AND COMPANY