Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.6 LAccepted-AOC | L1 | Accepted-AOC Work awarded | |
| 2 | L2₹83.9 L+₹8.3 L (11.0%)Rejected-Finance CC 1 BOOTH NO 8 JANTA BHAWAN ROAD SIRSA SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L2 | Rejected-Finance Due to higher rate | |
| 3 | L3₹90.4 L+₹14.8 L (19.6%)Rejected-Finance OM VIHAR COLONY DELHI ROAD ROORKEE | L3 | Rejected-Finance Due to higher rate |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
25 Aug 2022, 11:00 amClosed
Superintending Engineer
Electricity Distribution Circle, Rudrapur
Replacement of LT Bare conductor by LT AB Cable in various places under Bhadaipura areas under Electricity Distribution Division, Rudrapur-I
2022_UPCL3_47646_1
EDC(USN)58/2022-23
Open Tender
Electrical Works
Item Rate
90 days
Rudrapur
Pl. Refer tender documents
3 documents required · 3 mandatory
₹5,900
SE EDC Rudrapur
₹1.6 L
20 Jul 2023
6 Aug 2022
26 Aug 2022
6 Aug 2022
25 Aug 2022
6 Aug 2022
Amount
Annexure-A (LABOUR CHARGES)
Cartage of PCC Pole 8.5 Mtr including Loading /Unloading from store centre at Haldwani/Rudrapur /Kashipur to work site .
Cartage of AB Cable & other small material including Loading /Unloading from store centre at Haldwani/ Rudrapur /Kashipur to work site.
Charges of Erection of P.C.C. Pole8.5 Mtr. Long ( 180 kg. W/L )for reducing span of LT, ABC line including digging of pits 0.6x0.9x1.5 Mtr.& with fixing of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge .
Charges of Laying, Stringing, sagging of ABC Cable3x120+1x95+1x16mm2 including fixing of Insulated,Piering Connector, Dead end clamp with I Hook, Suspension Clamp with I Hook in all complete work as per direction of Engineer-In-Charge.
Charges of Installation & Fixing of L.T.Distribution Box & Connection of L.T. consumer including all complete work as per direction of Engineer-In-Charge.
Charges of Removal & Re-connection of exising cable of single phase service connection same as per direction of Engineer-In-Charge.
Charges of Removal & Re-connection of exising cable of LT Three phase service connection same as per direction of Engineer-In-Charge.
Charges of Dismentaling of Old ACAR Conductor L.T. Line including re-rolling cartage from site works to JE store ( L.T. Line 3 Phase 4 wire).
Charges of Dismentaling of Old ACAR Conductor L.T. Line including including re-rolling cartage ferom site works to JE store ( L.T. Line 2 Phase 3 wire)
Charges of Dismentaling of Old ACAR Conductor L.T. Line including including re-rolling cartage ferom site works to JE store ( L.T. Line 1 Phase 2 wire)
Charges of Fabrication of MS Channel/angle 50x50x6 mm (supplied by the department) with cutting, drilling holes and fabrication charges as required by Engineer in charge for proper completion
charges of Erection of MS earthing rod 20x2500 mm by earth, electrod, connection with support by means of earth wire 7/10sqm with nut & bolts in all complete work as per direction of Engineer in charge
Charges of Grouting of stay in ratio 1:4:8. (1 cemant:4 graded stone 20mm,8 course sand) including cost of cemant,sand & stone blast back filling soil bolder in pit etc. (0.108 cum each) as per RESPO specification & as per direction of Engineer in charge.
Annexure-B (SUPPLY ITEMS)
Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex/RMC make or other ISO reputed company ) with Panel Lock with key) ( As per drawing attached )
Supply of LT XLPE cable unarmoured 1x35 Sqmm
Supply of Dead End Clamps with I Hook. As per drawing and UPCL Specification.
Supply of Suspension Clamps with I Hook. As per drawing and UPCL Specification.
Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 120 Sqmm TYCO/RPG/3M Make
Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 95 Sqmm TYCO/RPG/ 3M Make
Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 35 Sqmm TYCO/RPG/3M Make
Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 35 Sqmm TYCO/RPG/ 3M Make
Supply of Aluminium Lugs ‘O’ type size 120mm.
Supply of Aluminium Lugs ‘O’ type size 95mm.
Supply of M.S. Clamp MS Flate 35x6mm with nut bolt for fixing L.T. Distribution Box as per upcl specification
Supply of Stay clamp 50x6 mm duly red oxide painted with suitable size with fitted Nut & Bolts and washer without cracks & burrs as per specification of UPCL.
Supply of Earth Clamp MS flate 50x6 mm as per upcl specification.
Supply of Nut & Bolt of all size as per upcl specification
ASHOK KUMAR AND CO
RAVI CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .