REPAIR AND MAINTENANCE OF EXTERNAL WATER SUPPLY NETWORK OF SOUTH COMPLEX AND MAINTENANCE OF SWIMMING POOLS AT IMA DEHRADUN

Amount

M&L for thorough cleaning of olympic size swimming pool after draining out complete, clean the surface by the help of brushes, chemical/Acid and taking out all silt, dirt etc including painting except tilling portion of pool area and foundation as per existing colour water proof paint including writing letters as per existing letters after filligng with fresh water (job shall be carried out in terms break/ closing after session as directed by Engineer-in-charge or medical authority) complete all as specified and directed. (Salaria Swimming Pool)

M&L for thorough cleaning of olympic size swimming pool after draining out complete, clean the surface by the help of brushes, chemical/Acid and taking out all silt, dirt etc including painting except tilling portion of pool area and foundation as per existing colour water proof paint including writing letters as per existing letters after filligng with fresh water (job shall be carried out in terms break/ closing after session as directed by Engineer-in-charge or medical authority) complete all as specified and directed. (Plunge Bath/New Swimming Pool)

M&L for drain out water/dewatering the tank with portable submersible pump from Over Head Reservior (OHR) of capacity 1.5 lakh Gallons at 21 mtr height from ground and cleaning of wall, ceiling and floor by high pressure water jet and remove the sludge / mud thoroughly, clean inner surface of the tank and wash out by flushing with clean water and drain out.Treatement of inside tank by exposing UV radiation to kill further suspended or floating bacteria, if any complete all as directed by Engr-in-Charge.

All as per item No. 3 here in before but capacity 1 lakh Gallons at 21 mtr head

All as per item No. 3 here in before but capacity 0.25 lakh Gallons at 21 mtr head

All as per item No. 3 here in before but capacity 0.10 lakh Gallons at 21 mtr head

M&L for dewatering the under ground or semi sunder ground reservoir with portable submersible pump of capacity 0.5 lakh Gallons and cleaning of wall, and floor by high pressure water jet and remove the sludge / mud thoroughly, clean inner surface of the tank and wash out by flushing with clean water and drain out.Treatement of inside tank by exposing UV radiation to kill further suspended or floating bacteria, if any complete all as directed by Engr-in-Charge.

Supply, laying, jointing, testing and commissioning of DI pipes 100 mm bore Centrifugally cast, internal cement mortar lining, external zinc coating with finishing layer of bitumen, pressure pipe socket and spigot end, confirming to IS 8329-2000 with ISI marked K-7 in standard length including necessary rubber gasket, tyton jointings with jointing materials including taking down old unsv CI/DI pipe complete all as specified.

All as per item No. 8 here in before but 150 mm bore

All as per item No. 8 here in before but 200 mm bore

M&L Ductile iron fittings for water pressure pipe, flanged one ends such as tail pieces, tapers, tee bend, bell mouth pieces etc up to 200 mm bore size.

Supply, laying, jointing, testing and commissioning of MS ERW pipe heavy grade of 150 mm bore (For fire fighting system at Magine)

M&L for MS fitting/specials suitable for 150 mm pipes such as bends, , tappers, etc any type and angle and straight connected pieces any type joint all flange ends including necessary cutting,welding, bending , drilling holes for bolts, in any shape or size as indicated or directed including necessary jointing materials such as nut, bolts, washers, packings and welding including dismantling existing fittings of any description and testing for leekage etc to the entire satisfaction of Engineer-in-Charge.

S & F Hydrant valve single headed Gun metal landing valve (internal/external Fire-Hydrants) with oblique type single outlet complete with hose coupling adaptor of 63 mm size, instantaneous spring lock arrangement and blank cap with chain conforming to IS 5290 complete all as directed.

S & F Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm size with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as directed

M & L Flanged stand post CI of 80mm dia 1.5m height complete all as directed

S&F in repair CI foot valves flanged type of 100 mm bore, ISI marked (flange drilling) including taking down old unserviceable foot valve complete all as directed

M&L for cast iron Machanical collar suitable for 80 mm bore CI /DI pipe with suitable push on type tyton joints nuts, bolts and washer complete. Note : (i) Excavation and earth work shall be measured and paid seperately under the relevent BOQ item. (II) T&P required for dewatering inside the pit to be provided by the Contractor at his own cost.)

All as per item No. 18 here in before but 100 mm bore

All as per item No. 18 here in before but 150 mm bore

All as per item No. 18 here in before but 200 mm bore

M&L in repairs for Drilling and tapping cast iron water mains (in position) for branch connection of 20/25/40/50 mm dia including clamps , nut, bolts and rubber packing as required where directed by Engr-in-Charge.

M&Lfor taking down and relaying/refixing of old steel tubing of size 15 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as directed by the Engineer-in-Charge.

All as per item No. 23 here in before but 20 mm bore

All as per item No. 23 here in before but 25 mm bore

All as per item No. 23 here in before but 40 mm bore

All as per item No. 23 here in before but 50 mm bore

All as per item No. 23 here in before but 80 mm bore

M&L for supply and laying in trenches GI tubing medium grade with necessary fittings such as bend, tee,elbow etc complete of size 25 mm bore including taking down old unserviceable GI tubing complete all as specified and directed by Eing-in-Charge.

All as per item No. 29 here in before but 40 mm bore

All as per item No. 29 here in before but 50 mm bore

All as per item No. 29 here in before but 80 mm bore

M&L for steel tubing medium grade galvanized with all fitting of size 15 mm bore laying on walls and ceilings or laying in floors including cutting through walls and making good to surfaces after laying of pipe complete all as specified and directed.

All as per item No. 33 here in before but 20 mm bore

Supply and fixing in repairs of gun metal gate valve with crutch or butterfly handle screwed both end for iron pipe of 15 mm bore including old unserviceable gate valve complete all as specified and directed by Engr-in-Charge.

All as per item No. 35 here in before but 20 mm bore

All as per item No. 35 here in before but 25 mm bore

All as per item No. 35 here in before but 40 mm bore

All as per item No. 35 here in before but 50 mm bore

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in 15 mm bore pipe complete all as specified.

All as per item No. 40 here in before but 20 mm bore

S&F sluice valve cast iron body, double flanged and drilled, 80 mm bore as per IS- 14846, class PN-1.6, long body type with SS spindle etc with all fittings, jointing materials etc including taking down old unserviceable sluice valve complete all as specified.

All as per item No. 42 here in before but 100 mm bore

All as per item No. 42 here in before but 150 mm bore

All as per item No. 42 here in before but 200 mm bore

S&F non return valve cast iron flanged both end installed on 150 mm dia CI pipes including taking down old unsv non return valve complete all as specified.

S &F installed CI air release valve double ball fixed on 150 mm dia CI pipe including taking down old unsv air release valve as specified.

M&L for lead wool joints including jointing materials such as spun yarn etc in position including taking out old damaged lead joins from the existing CI mains of size 80 mm bore complete all as specified

All as per item No. 48 here in before but 100 mm bore

All as per item No. 48 here in before but 150 mm bore

All as per item No. 48 here in before but 200 mm bore

M&L for repacking or stuffing box of sluice valve spindle of size 80 mm bore including taking apart and re-assembling in valve pit chamber/on open line complete all as specified and directed.

All as per item No. 52 here in before but 100 mm bore

All as per item No. 52 here in before but 150 mm bore

M&L for taking out sluice valves of size 80 mm bore for refacing, regrinding, fixing rubber packing and make the valve serviceable and leak proof and refixing complete all as specified.

All as per item No. 55 here in before but 100 mm bore

All as per item No. 55 here in before but 150/200 mm bore

S&F 100mm water pressure gauge with suitable nozzal of capacity 1 to 100 PSI compelte all as specified.

M&L for construction of brick masonnary valve pit with full brick wall chamber size of 1500x1500x1500mm internal diemension with earth work in any type of soil , PCC 1:3:6 type C-2 as in foundation , brick work in CM1:4, 15mm thick plaster in CM1:4 internaly and externally , flush pointed in same mortar as work proceeds , 75mm thick PCC coping all around in 1:3:6 type C-1 , flooring shall 40mm thick PCC1:2:4 type B-1 laid over 75mm thick hard core. Top cover shall be made out of 3mm thick MS sheet fixed in angle iron frame made out of angle iron size 40x40x6mm with two numbers of hinges on one side and locking arrangement at other side complete including painting with two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed including demolation of old existing Abandoned valve pits.

All as per item No. 58 here in before but size 1200x1200x1200 mm

All as per item No. 58 here in before but size 1000x1000x1000 mm

All as per item No. 58 here in before but size 900x900x900 mm

All as per item No. 58 here in before but size 750x750x750 mm

All as per item No. 58 here in before but size 600x600x600 mm

M&L for cutting of existing road/hard standing for laying of pipe line, depth of cutting not exceeding 60 cm and width 45 cm and filling the trench of road i.e. excluding top 15cms with existing aggregate obtained from cutting , watered and properly rammed to satisfaction of EIC and finally provide 150 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate to entire width of trench & finally match the top surface to road & disposal of debris to a distance not exceeding 50 Mts and depositing where directed complete all as directed. (Note: Quoted rate is deemed to be inclusive of 150 mm thick PCC 1:3:6, cutting any type of road and removal of debris).

S&F stainless steel spindle for CI sluice valve size 80 mm bore

All as per item No. 65 here in before but 100 mm bore

All as per item No. 65 here in before but 150 mm bore

All as per item No. 65 here in before but 200 mm bore

S&F in repair MCCB , 4 pole, 250 Amps, 36 kA, 415 Volts, 50 Hz, AC and taking out existing old unserviceable MCCB including electric connection & testing complete all as specified and as directed.

All as per item No. 69 here in before but 200 Amps 36 KA

All as per item No. 69 here in before but 160 Amps 25 KA

All as per item No. 69 here in before but 100 Amps 25 KA

Excavation in trenches not exceeding 1.5 mtr deep and 1.5 mtr width as in any type of soil complete all as specified.

Returning filling incl leveling watering and well ramming in layer not exceeding 25 cm thick complete all as specified & directed by EIC.

Removal of surplus soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m before the starting point complete all as directed by Engr-in-Charge.

KISHORE ENTERPRISES

venus engineers

Anil Kumar Gupta