AS AND AS OF TOILETS/WASHROOMS AT SURG WARD1, ICU PSY WARD AT BUILDING NO P-109 INHS KALYANI, VISAKHAPATNAM

Amount

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exe 100 m complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris to a distance n.exe 100 m complete all as specified and directed.

Removing building materials etc. (other than spoil)out side MOD land to a distance of 15.00 km or under, beyond the lead , including loading, unloading and stacking at the destination complete all as directed.

M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, shelves etc complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately)

S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.

M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 as in half brick thick using old size brick complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for filling polymer modified non shrinking slurry for sunken floors of toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick Acrylic polymer modified elastomeric waterproofing membrane coating over the concrete syrfaces by mixing Acrylic emulsion cement modifier and water based concrete bonding agent and water including testing the same for 48 hours as per the manufacturer's technical specification complete all as specified and as directed Make: (a) Polymer modified non shrinking slurry = CEBEX 100 of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Acrylic polymer modified elastomeric waterproofing membrane = Brushbond of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (C) Acrylic emulsion cement modifier and water based concrete bonding agent = NITO BOND BB with Brush bond powder of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

S&F 50 mm bore unplasticized PVC (UPVC) pipes of pressure rating 10 kgf/sq. cm including all fittings and fixed to wall ,ceiling and laid on floor including testing complete all as specified and directed.

Supply, laying, connection and testing in repair, 15 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, laying, connection and testing in repair, 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

M&L for 18mm thick ply wood veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed.

S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F vitreous china rimless bowl extended wall hung WC of size: 375x630x750 mm with Cistern , PP soft close seat cover, hinges, dual flush cistern fitting, accessories set complete all as specified and directed Make: Jaquar Cat No. CNS-WHT-363SPPZ or equivelant model of make as per list of manufacturer mentioned in PS.

S & F Vitreous China urinal, half stall type (Back or corner wall type) of size 710x480x300 mm, white (minimum) with grating and SS bottle trap(excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including brass stainless steel speader 15 mm bore complete complete as specified and directed.

S & F curved shaped urinal partition with 8mm thick frosted glass of size 900 mm x 450 mm including necessary chrome finished accessories complete all as specified and directed Make: Jaquar Cat No. JSE-CHR-810UC450X or equivelant of make as per list of manufacturer as mentioned in PS.

S & F hand wash dispencer holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat No. SDR-WHT-DJ0010FN or equivelant model of make as per list of manufacturer mentioned in PS.

S & F stailess steel grab bar of size 692 mm long, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat No. WAC-SAP-BR0600CSN or equivelant model of make as per list of manufacturer mentioned in PS.

S&F in repair CP tissue holder fixed in walls with plugs & chromium plated brass screws complete all as specified and directed.

S & F sheet glass shelf assembly of size 450 mm x 150 mm consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F in repair Towel Ring Round with Round Flange or square including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. ACN-1121BN or equivelant of make as per list of manufacturer's)

S & F 15 mm bore, CP Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. (Make: Jaquar Cat No. ALD-573 or equivelant of make as per List of manufacturer's)

S & F 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.. (Make: Jaquar Cat No. CON-037KNor equivelant of make as per List of manufacturer's)

S & F 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. CON-041KN or equivelant of make as per list of manufacturer)

S & F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. (Make: Jaquar of make as per list of manufacturer)

S & F 15 mm bore, CP angular stop valve with wall flange complete all as specified and directed. (Make: Cat No. CON-059KN of JAQUAR or equivalent make from existing Make list of PS catered here-in-after)

S & F 15mm bore, PVC connection pipe 450 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F vitreous China wash basin, size 550 x 400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed.

S&F 15 mm bore Fancy type pillar taps, long swan neck type with quarter turn, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Providing and fixing factory made uPVC white colour fixed window/ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners including stainless steel wire cloth ,0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless stell wire staple complete all as specified and as directed.

S & F 75 mm bore, PVC (SWR), Soil waste and vent pipes single socketed in any length with or without ears, with rubber ring joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes single socketed in any length with or without ears, with rubber ring joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with rubber ring joints laid in trenches or in floor etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with rubber ring joints laid in trenches or in floor etc complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) floor trap/Nahani Trap, with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with access door complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with access door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and directed.

S & F75 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frames/ Chowkhats of size 65 mm x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as spefied and as directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive trength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body hreaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges with S S screws shall be paid separately) complete all as specified and directed.

S & F in repair 150 mm long, stainless steel, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed.

S & F 300mm long, Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 150 mm long brass handles,fabricated with brass coated including necessary fittings and fixtures complete all as specified and directed.

M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for post construction Antitermite treatment Treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed

S & F 1000 litres capacity rotational moulded polyethylene water storage tanks, double layer construction, ISI marked (Cylindrical vertical with closed top), hoisted and fixed in position as specified in SSR Part I and directed.

S & F ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms ) complete all as specified and directed.

S & F in repair 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceilings, etc and applying three coats of white wash complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size 450mm x4300mm x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for double charged Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set in neat cement slurry by providing 3 mm spacer and pointed with epoxy grouting by applying masking tape complete all as specified and directed.

M & L for double charged Vitrified, designed, light shade coloured, tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exc 0.36 sqm as in vertical surfaces such as skirting,dado, etc including 10 mm thick bedding in cement mortar 1:4 and necessary cutting of tiles complete all as specified and directed.

S & F aluminium Anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium T section of size 38mm x 25mm x 1.5mm thick for main runners, 25x25x1.5mm thick for cross runner and angle size 25x25x1.5mm thick alongwith wall suspended and including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to ceiling members in proper position, fixed with aluminium staple on snap grid as per manufacturer's instructions complete all as specified and directed .

Providing and fixing Gypsum Board, 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20 mm dia,D type,60 cm long between flanges complete all as specified and directed.

M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished to smooth mirror finish), machine cut, colour Mexican Red/Ruby Red/Z black/Paerl black etc design/pattern as directed including inlays, borders, margins in two or more colours/shades as in floors, trades of steps, cill cooking platform etc set and bedded over 15 mm thick screed bed in cement mortor 1:6 and jointed with grey cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite slabs& cutting, polishing complete all as specified and directed. (Note: Single stone slab shall be used for entire length/height of steps, jambs, pillars, window cills, cooking platform etc and joints shall match with the flooring complete)

CHAMUNDESWARI ENTERPRISES (BID ID -3392936)

S A R CONSTRUCTIONS (BID ID -3399067)

ANUJ INFRA (BID ID -3399172)

RATNA ENTERPRISES (BID ID -3398165)

SAI KRISHNA ASSOCIATES (BID ID -3397631)

SRI SAI MANIKANTA ENTERPRISES (BID ID -3399384)

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS (BID ID -3399238)

M/S SRI VENKATA BHAVANI CONSTRUCTIONS (BID ID -3397212)

N Sydeswara Rao (BID ID -3394683)