Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹37.3 L+₹1.6 L (4.52%)Rejected-Finance BANKODI BANKODI BANKODI KALYANPUR JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L2 | Rejected-Finance NOT BEING LOWEST BID | |
| 3 | L3₹38.5 L+₹2.8 L (7.98%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST BID | |
| 4 | L4₹38.5 L+₹2.9 L (8.00%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance NOT BEING LOWEST BID | |
| 5 | L5₹42.0 L+₹6.3 L (17.6%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST BID |
Tender Value
₹40.5 L
EMD Value
₹81,000
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
PROVN OF SENTRY POST AND OTHER SANCTIONED WORKS AT MISSAMARI UNDER GE MISAMARI
2022_MES_558553_1
8317
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹81,000
Yes
16 May 2023
19 Oct 2022
11 Nov 2022
19 Oct 2022
9 Nov 2022
2 Nov 2022
60 days
Amount
Surface dressing n exc 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation over areas n exc 1.5 m deep and getting out in soft loose soil, complete all as specified and directed.
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/loose Soil, complete all as specified and as directed.
Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/loose Soil, complete all as specified and as directed.
Removing excavated Materials (Soils) n.exc.50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
Removing excavated Materials (Soils) exc1.50 KM but not exc 5.00 KM and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/loose Soil, complete all as specified and as directed.
M&L Cement concrete (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L Cement concrete (1:3:6) type C2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.
M&L Cement concrete (1:3:6) type C2 ( using 40 mm graded stone aggregate) as in surface channel, drain, etc, complete all as specified and directed.
M&L cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in foundation, complete all as specified and directed.
M&L cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, pathway, etc, finishing cement concrete surfaces even & smooth without using extra cement, complete all as specified and directed.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.
M&L for 100 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.
M&L for Reinforced Cement Concrete M-25 ( using 20mm graded stone aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc, Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete M-25 ( using 20mm graded stone aggregate) in columns, pillars, piers, post and strut, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete M-25 ( using 20mm graded stone aggregate) as in beams, cantilevers, Chajjas colomns, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete (Nominal Mix) 1:2:4 type B1 ( using 20mm graded aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete (Nominal Mix) 1:2:4 type B1 ( using 20mm graded aggregate) in columns, pillars, piers, post and strut, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L Pre-cast Reinforced Cement Concrete (1:2:4) type B1 ( using 20mm graded stone aggregate) providing, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.
M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
Use & Waste formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.
Use & Waste for formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.
Use & Waste for formwork to side & soffits of floor or roof beams lintels & similar works, complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick in floors/skirting etc. over & incl 20 mm thick screed bed in CM 1:6, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F of pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.
S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,etc, complete all as specified and as directed.
S&F Flat iron of reqd size and section as in wind ties, wall tie, hold fast, etc, conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter) forming holes, with riveted bolted or welded attachment Fe-410-W(Gde-E-250) quality A, complete all as specified and directed.
S&F for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, with and incl necessary nut and bolts of 12mm dia of reqd length complete.all as specifed and directed
S&F for Mild steel Round bars bar Fe-410-W (Gde.E-250) 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with mild steel not less than 0.9 mm dia (annealed), complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed.
Supply only ChainlinkMSgalvanisdfencing,any size or type
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
S&F for three seater Bench ovarall size 150cm x 60cm x 76cm made of 13 Nos MS hollow rectangular pipe of size 76.2mm x 38mm x 3.36mm thick with 2 nos decorative cast iron legs(stands) intregated seat and back with weight bearing capacity of 170 Kg, including two coat of synthetic enamel paint over a coat of pink primer in different choice colour for seat & back and Legs, complete all as specified and directed.
S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender, complete all as specified and directed.
M&L for 4mm thick Non Asbestos designed fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium framework with screw in ceiling flat or sloping, complete all as specified and as directed.
M&L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m radius in half brick wall built in CM 1:4 complete all as directed.
M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) mixed with WPC, complete all as specified and directed. Note : WPC shall be measured & paid separately.
M&L for Rendering 15mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick or concrete Surfaces , plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and as directed. Note : WPC shall be measured & paid separately.
Supply only integral Water Proofing Compound
M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.exc 25 cm thick, complete all as specified and as directed.
M&L for Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.
M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles, glossy finished of size 350x450x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and as directed.
S&F for Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc, complete all as specified and as directed.
Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.
S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified incl power coating above aluminium section.(minimum thickness of poweder coating 50 micron), complete all as specified and directed.
S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thickness of powder coating 50 micron), complete all as specified and directed.
S&F for aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
M&L for Second Class Hardwood battens,sqaure, rectangular or triangular in Section Clean sawn, secured with Nails,at 20cm centres sectional area exc. 15 Sq Cm but not exc.25 SqCm , complete all as specified and as directed.
S&F for PVC ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405(40x46mm)(3 mm pin headed glass using extruded PVC section having dia of 0.9x14.5mm EDPM gasket, complete all as specified and directed.
S&F 150mm long aluminium tower bolt, complete all as specified and as directed.
S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed.
S&F 100mm long stainless steel butt hinges complete all as specified and as directed.
S&F 150mm long aluminium bow handle complete all as specified and as directed.
S&F 15mm bore GI tubing medium graded with all fitting and fixed to wall and ceiling or laid in floor, complete all as specified and as directed.
S&F 20 mm bore GI tubing medium graded with all fitting and fixed to wall and ceiling or laid in floor, complete all as specified and as directed.
S&F 20 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed, complete all as specified and as directed.
S&F 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete as directed and specified.
S&F 15 mm bore angular stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed complete all as specified and directed.
S&F PVC connections pipe 15mm bore size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed.
S&F vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.
S&F 15 mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , complete all as specified and directed.
S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 32mm-45 gms/40mm-60 gms), complete all as specified and as directed.
S&F 100mm dia PTMT grating jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) 75 mm bore (dia) Soil, Waste and Ventilating Pipe, double Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors, complete all as specified and as directed.
S&F PVC (SWR) 110 mm bore (dia) Soil, Waste and Ventilating Pipe, double Socketed, in any length with Rubber Ring Joints, fixed to walls, complete all as specified and as directed.
S&F PVC (SWR) 110 mm bore (dia) Bend any type, any radius, and jointing with Solvent Cement , complete all as specified and as directed.
S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed.
Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line, complete all as specified and directed.
Cutting into existing manholes of 150 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, complete all as specified and directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over and incl 20 mm screed bed or bedding layer of cement mortar (1:6) ,set, jointed and pointed in neat cement slurry with grey pigment cement and pigment, complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M - 40 grade over and incl 50mm thick sand coushining, complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M -35 grade over and incl 50mm thick sand coushining, complete all as specified and directed.
M&L for providing Pre-cast cement concrete1:2:4 block masonary with solid blocks, exc 10 cm in width and setting in morter 1:6 complete, complete all as specified and directed.
S&F 11 to 15 mm dia mild steel screw bolts with hexagonal or square heads at one end and screwed the other and screwed end to be fitted with washers, one nut, length of bolt exc 10cm and n exc 15 cm, complete all as specified and directed.
M&L for cement concrete bed to drain pipe 600mm bore (Internal) in cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against all sides of pipes after they are laid and tested, complete all as specified and directed.
M&L for NP3 600 mm dia reinfroced cement concrete pipes class NP3 laid and jointed in collars, complete all as specified and directed.
M&L for preparing new plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed
M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Concealed Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.
All as per item No 96 but, for one Ceiling fan / Exhaust Fan point controlled by one, one way switch and regulator, complete all as specified and as directed.
All as per item No 96 but , One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and as directed.
S&F switch piano single pole flush type 5 amps, 230 volts, complete all as specified and directed.
S&F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts, complete all as specified and as directed. Make : Havells/REO/Legrand/L&T
S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm, complete all as specified and directed.
S&F lamp holder insulated body surface bakelite with back plate suitable for angle/batten fittings fixed with PVC round/square blocks, complete all as specified and directed.
S&F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen, complete all as specified and as directed. Make : Cat No. LHLDEUEBML8Z010 of Havells or equivalent in CG/Polycab.
S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 4 way double door openable, complete all as specified and directed.
S&F MCB Double Pole 20 Amps 240/415 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Cat No: BB20320B of L&T or equivalent in Schinder/Legrand.
S&F MCB SP, 240 volts, 6A Amps 50 Hz ,confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Model No. BB10060B of L&T or equivalent in Schinder/Legrand.
S&F 5 star rated BLDC ceiling Fan AC 230 Volts single phase 1200 mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement, complete all as specified and directed. Make: Usha ,Model No. TECHNO AIR 5 Star of USHA or equivalent in Havells/Crompton.
S&F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder, complete all as specified and directed. Make : Model No. REGALBATTENT8UPTO1X18WDSBSWH of Havells or equivalent in CG/Polycab for Batten Fitting, and Model No. PHOTONULTRAE2.01213T8SSTL18WLED865SPC of Havells or equivalent in CG/Polycab for T8 Tubelight.
S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape, complete all as specified and directed. Make : Model No - ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equivalent in CG/Polycab.
Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable, complete all as specified and directed.
Supply & Laying LT heavy duty UG Cable of size 6 Sqmm x 2 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length, complete all as specified and directed. Make : Polycab/Havells / KEI
All as per item No 111 above but, cable of size 4 sqmm x 2 core, complete all as specified and directed. Make : RR/ Havells /KEI.
Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection, complete all as specified and directed.
Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable,complete all as specified and directed. Note : Punned thickness will be measured and paid separately under relevant item.
S&F heavy duty exhaust fan, 300 mm sweep, MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type, complete all as specified and directed. Make : Orient/USHA/ Havells.
S&F for IP 65 Rated Decorative landscape LED Post top light 35 W ideal for heritage sight asthethically designed with good indirect symetrical light distribution , spun aluminium landscape luminaire with high power LED as light source,provision of new 3 core multistranded copper conductor of size 23/0.193 from control DB to fitting including suitable LED Driver complete all as specified and directed. Make : Model No. RUBYPT35WLED757PSYMTOPC of HAVELLS or equivalent in crompton/Surya.
S&F for IP 65 Rated Decorative LED BOLLARD 8W Pathway light ideal for heritage sight ,asthethically designed with good indirect symmetrical light distribution, spun aluminium landscape luminaire with high power LED for maximum illumination, provision of new 3 core multistranded copper conductor of size 23/0.193 from control DB to fitting including suitable LED Driver, complete all asspecified and directed. Make : Model No. CONENXGBLS8WLEDPSYM830TOPC of HAVELLS or equivalent in crompton/Surya.
S&F Water /Weather Proof Pole mounted, rustfree, withstand solar radiation and heavy rain, maintenance free, SMC moulded Service connection boxes IP 54, Dimensions 350 x220 x 150 mm ,double hinged ,incl clamping of distribution boxes, complete all as per specified and directed. Make: Syntax/ HENSEL.
S&F for MCB SP 10 Amps 240 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed .Make : Cat No: BB10100C of L&T or equivalent in Schinder/ Legrand.
Supply & lay GI tubing, 40 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed.
Supply & lay GI tubing, 32 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed.
Supply & lay GI tubing, 50 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed.
Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and directed. NOTE: GI Pipe laid will be measured and paid separately under relevant Item.
M&L for Painting of GI Pole 50 MM dia of 3 mtr with black bituminious paint over a coat of red oxide primer, complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc, and CI cover with frame, PCC chamber pit with PCC (1:3:6) type C2 (using 40mm graded stone aggregate) excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed . Notes : The unit rate includes for protection pipe and GI wire 4.00mm dia from top of earth plate up to 5.00 meter above ground level.
S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 50 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and directed.
S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and directed.
S&F PP-R Gate Valves (Brass Insert) 32mm Outer dia and fixed, complete all specified and directed.
S&F PP-R Gate Valves (Brass Insert) 50 mm Outer dia, complete all specified and as directed.
Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 50 mm dia, complete all specified and as directed.
M&L for connection pieces for inserting 50 mm PPR pipe into 80 mm distribution mains, complete all specified and as directed.
Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 50 mm x 32 mm including cutting and making fusion joint etc all as specified and directed.
Sneh Construction Co
MS Awash Ghosh and Brothers
Saraswati Auto Works
R D ENTERPRISE
MS Gautam Construction and CO
Satya Enterprises
M/S Singha Enterprise
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .