Repair to joinery work in certain bldgs at Bundela Enclave Dilbag Enclave and MES Colony under AGE BR-II GE (AF) No2 Jodhpur and Repair to hard standing Drain foothpath Boundary wall and Gate at Bundela Enclave and MES Colony at Domestic area under A

Amount

Taking down chowkhat or frame n exc 1.50 sqm each (without taking of shutters from the frame) and removing from site complete all as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Taking down chowkats or frames exe 1.5 Sqm but n.exc 4 sqm each with shutter (without taking off shutters from the frame) and removing from site complete all as directed.

S&F Pressed steel frames of size 105x60 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified & directed.

S&F Pressed steel frames of size 125x60 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified & directed.

S & F Plain framed, panelled shutter of 2nd class hard wood (two panel) of 35mm thick factory made shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S/F Flush shutters,40 mm thick particle board core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M/L for factory made, Glazed and skeleton shutters for door/window of thickness 35mm of IInd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats. Note: Glazed or cloth etc., in panels or sash square shall be measured separately

S&F Galvanised MS wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F steel windows with side hinges shutters including projecting type hinges with steel handles, steel peg stay complete with glazing bar, devetailed or welded. Note: Quated rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.

S&F steel windows with side hungs shutters including projecting type hinges with steel handles, steel peg stay complete without glazing bar, dovetailed or welded. Note: Quated rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of red oxide complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of pink primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

S&F frame work such as guard bars, grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 grade E-165.

Framed work as in doors or gates, cooler stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing of Fe-290(Gde E-165) complete all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel type C21of size 100 mm.

S/F floor door stoppers of aluminium alloy body and toung , anodised with hard drawn steel spring with overall length of cover plate is 140 mm

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size complete all as specified and directed

S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long.

S&F extracted aluminium alloy handles, fabricated type, anodised of size 150mm.

S&F in repairs Galvanised MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples.

S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane incl glazing clips .

S/F in repair floor door stoppers of alluminiun alloy body and toung, anodised with hard drawn steel spring with overall length of cover plate is 140 mm complete all as specified and directed.

S&F in repairs MS sliding door bolt with hasp and staple (bolt type) of 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed size 300mm long complete all as specified and directed

S&F in repairs extructed aluminium alloy handles, fabricated type, anodised of size 150mm complete all as specified and directed.

M&L in repairs for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. Complete all as specified and directed.

S& F in repairs pre-laminated particle board, interior grade 18/19 mm thick , pre-laminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or other place as built up furniture as specified and as directed,

S & F Plain fillets 2nd class hard wood of sectional area not exe 3 sq cm , square, rectangular or triangular in section, clean sawn, secured with mills or brads complete all as specified and directed

S& F in repair 40 mm dia cupboard knobs fixed with nuts, screw and washer of brass polished bright finished complete all as specified and directed.

Taking down cement plaster on stone masonry walls including racking out joints hacking for key scrubbing down with water etc

M&L for rendering 15mm thick in CM 1:6 on stone masonry/brick wall surface including finish even and smooth surfaces without using extra cement complete all as specified and directed.

M&L preparing new plastered surfaces and applying two coat Oil bound distemper on walls complete all specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises.

M&L for non-skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

S&F in repair stainless steel curtain rod with including fancy type SS fixing brackets stops rollers etc complete all as specified and directed by Engr-in-charge

Demolition of cement concrete (unreinforced) in ground floor or paving of any description and in any position not otherwise specifically provided for all as specified.

M&L for 100 mm plain Cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in hard standing /pavement all as specified and directed

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade B all as specified and directed

Excavation in post holes or similar holes each n. exc 0.50 cum, getting out and returning, filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm, watering and removing surplus soil to a distance n. exc 50 mtr and making good disturbed ground complete all as specified.

M&L for PCC 1:3:6 type C-2 (with using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Dismantling posts or struts embedded in concrete(wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 all as directed by Engineer-in-Charge.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming Fe-290 Gde-165.

S & F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanise mild steel wire, staples or steel pins, as directed (Each line wire to be measured).

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10 cm in width or girth not otherwise described.

Supply only GI chain link fencing including line wires any mesh and any size and type to any type of standards rails etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F screw bolts (machine made) with hexagonal or sq are heads at one end and screwed the other each screw to be fitted with one hexagonal or square nut length of bolts n exc 10 cm and dia of shank 5-10mm.

S & F in repair razor type concertina coil hot galvanised spring tensile wire fixed on Y shape angle iron having barbed wire and coil having 6 to 8 RM per coil of 900 mm dia and minimum weight 7.5 Kg / Coil etc all as specified and directed

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M & L preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coat synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made in rubber mould/rubberised type with grey cement and pigment.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Demolition of stone masonry built in cement mortar of any description and in any position not otherwise specifically provided for all as specified.

M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar1:6 all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. as specified and directed.

M&L for cement concrete Type B1 (1:2:4) (20 mm graded aggregate) as in coping , benching & kerb or mud stop all as specified and directed.

M&l for raised pointing to , to squared rubble masonry, coursed or un-coursed cement mortar 1:3 all as specified and directed.

JAMWAY MATA CONSTRUCTION COMPANY (BID ID -3299202)

AAI NATH ENTERPRISES (BID ID -3297551)

M/S MAJISA CONSTRUCTIONS (BID ID -3299341)

JAI HANUMAN CONTRACTOR (BID ID -3306112)

Sukhdev Construction company (BID ID -3300678)

POOJA CONSTRUCTION (BID ID -3299868)

Rakesh Choudhary Contractor (BID ID -3298731)