Repairing work in different toilet block under SBM in Bodakdev Ward and other wards in North West Zone.

Name of Work:- Repairing work in different toilet block under SBM in Bodakdev Ward and other wards in North West Zone.

Sr. No Qty Items Per Amount Rs.

Excavation for foundation up to 1.5 m depth including sorting out and stacking of

useful materials and disposing of theexcavated stuff upto 50 Meter lead .(A)

1 Loose or soft soil (R & B S.O.R 2023-24 I.no. Item Code 04001A)

50 Upto 1.5 mt Depth 115.92 Cmt

50 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock ) in trenches , plinth, sides of

foundations etc . in layers not exceeding 20 cm. in depth consolidation each

2 10 deposited layer by ramming and watering. 129.1 Cmt

Providing and laying cement concrete 1:5:10 (1-Cement: 5- coarses

sand and:10-hand broken stone aggregates 40mm nominal size ) and curing

complete excluding cost of formworkin (A) Foundation and Plinth.

Providing and laying cement concrete1:4:8 (1-Cement: 4- coarses and :8-

hand broken stone aggregates 40mm nominal size ) and curing complete

excluding cost of formworkin (A) Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1-Cement: 3- coarses sand

and:6-hand broken stone aggregates 40mm nominal size ) and curing

complete excluding cost of formworkin (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand :6-

crushed stone aggregates 20mm nominal size ) and curing complete including

6 10 cost of formwork in (A) wall caps/coping 4006.15 Cmt

Providing and laying cement concrete work 1:2:4 ((1-Cement:2- coarse

sand:4-graded aggregates 20mm nominal size) curing complete excluding

7 5 cost of formwork and reinforcement.

a 10 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders and cantilivers

b 10 upto floor two level 4012.47 Cmt

c 5 Independent piers, columns, and pillars, upto floor two level 3661.3 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregates 20 mm nominal size ) for reinforced concrete chhajjas

not exceeding 10 cm. thickness upto floors two level including finishing

the exposed surfaces with cement mortar 1:3 (1 cement : 3 find sand) to give a

smooth and even surface centering and form work and curing complete

8 3 excluding cost of reinforcement. 6487.07 Cu.M.

Providing and laying controlled cement concrete / Ready Mix Concrete of

M-200 and curing complete , excluding the cost of form work and

9 reinforcement for reinforced concrete work in:

(A) 2 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

(B) 2 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor

(D) 2 Columns, pillars, posts, and struts, up to floor two level. 4558.2 Cu.M.

(E) 2 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 2 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size ) and finishing

smooth with curing etc . complete including the cost of form work but excluding the

cost of reinforsement for R .C.C work in (iv) Slabs having more than 13 cm and

10 2 upto 15 cm.thickness 6241.78 Cum

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size ) and finishing

smooth with curing etc . complete including the cost of form work but excluding the

cost of reinforsement for R .C.C work in (iv) Slabs having more than 8 cm and upto

11a 2 10 cm.thickness 7401.59 Cum

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg./Sq.Cm.in foundation and plinth in Cement

12 5 Mortar1:6 (1-Cement :6 - fine sand)

2 (A) Conventional (upto 10 ton) 3981.21 Cmt

2 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for super structure above plinth level

13 2 upto floor two level (B) Conventional

a 2 (A) Conventional 272.25 Cmt

b 2 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular

c 2 42.66 Per Cum

D) above floor two level Item No. 2(6.13) (B) Conventional

d 2 40.09 Per Cum

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 coarse

sand ) in foundation and Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth level upto floor

15 3 two level (B) conventional 52.8 Smt

Providing form work in ordinary timber planking so as to give a rough finish

including centering, shuttering, strutting and propping etc . height of propping

and centering below supporting floor to celling not exceeding 4 M & removal

of the same for in situ reinforced or plain concrete work upto floor four level

a 2 Foundation, footings, bases of columns etc. and mass concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the like . (1)

b 2 Floors etc. upto 200 mm in thickness. 252 Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs Landings and the like .

c 2 (2) Floors etc. above 200mm in thickness. 270.9 Smt

Vertical surface such as walls (any thickness) partitions and the like including

d 2 attached buttresses & string course & the like. 229.95 Smt

(ii) Sides And Soffits Of Beam , Haunchings Cantilevers, Girders, Bressumers

e 2 And Lintels Not Exceeding 1 M In Depth. 192.15 Smt

(G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

g 2 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti -levers Girders Bressumers

h 2 and Lintels exceeding 1M.in Depth. 259.88 Smt

Providing and fixing 35 mm thick panelled , glazed or panelled and glazed

shutters for Doors windows and clear story windows including anodised

alluminium But hinges with necessary screws and indian teak wood shutters with.

a 2 (A) Plywood sheet panels. 3459.09 Smt

b 2 (B) Particle board panels 3464.51 Smt

c 2 (C)Hard board panels. 3433.65 Smt

d 2 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards etc . including

black enamelled M .S. butt hinges with necessary screws .(A) Indian teak wood .

18 2 (i) Fully Panelled. 3006.75 Smt

Providing and fixing 25 mm thick shutters for cupboards etc . including anodised

alluminiu butt hinges with necessary screws. (A) Indian teak wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc . including anodised

alluminiu butt hinges with necessary screws . (A) Indian teak wood. (ii) Partly panelled

b 2 and partl glazed. 2814.42 Smt

Providing and fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass windows and ventilators

with teak wood frame 10 cm. x 7 cm. size including 3 coats of oil painting to

20 2 wood work etc.complete. 4102.54 Smt

Providing and fixing glazed louvered glass windows and ventilators

with teak wood frame 10 cm.x7 cm. size including 3 coats of oil painting to

wood work etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors , windows and clere story

windows including Indian teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors , windows and clere story

windows including Indian teak wood frames 10 cm x 7 cm. size including black

enamelled iron oxidixed fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium

fixtures and fastenings including primer coat of approved quality and two coats of oil

painting etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR

SHUTTER consisting of frame made out of M .S.tubes of 19 gauge thickness and size

of 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails .M.S. frames

hall have a coat of steel primers of approved make and manufacture , M.S.

frames hall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm formings tiles , and 5 mm thick 75 mm wide PVC sheets for to prail

lock rail and bottom rail on either side , and 10 mm (5 mm x 2) thick, 20 mm wide

cross PVC sheet as gap insert for top rail and bottom rail , Panelling of 5 stiles and

rails with 30 mm wide x 5 mm thick PVC sheet beading on eighter side , and

joined together with solventcement adhesive ,. An additional 5 mm thick PVC strip of

20 mm width is to be stculkon the interiors side of the ‘c’ channel using

PVC solvent cement adhesive etc. complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonal 20 x 5 mm size with top

and bottom rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with

bolts, nuts, locking arrangements, stoppers, handles, including a priming coat

25 2 of red lead paint & approved make. 5391.23 Sq.M.

Providing and fixing 1 mm thick M .S. sheet sliding shutters with frame and

diagonal braces of 40x40x6 mm angle iron , 3.15 mm M .S.gusset plates at

Junctions and corners 25 mm dia. pulley, 40x40x6 mm angle and T -iron

guide rail at top and bottom respactively with handles , stoppers and

locking agangement etc, including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame using approved

quality anodised extruded alluminium section as approved by Engg .in

charge (Jindal alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

bottom section at 114.3x44.45 mm at (1.37kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing chips on upper pannel

& Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded aluminum Colour r

Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm

@ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt.

1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame using approved

anodised extruded alluminium section as approved by Engg . In

charge.(Jindal alluminium) units equivalent Approved Rate )Frame section of

x 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved

color Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section of size

mmx38.10 mmx1.2 mm (Jindal Section :2434, or equivalent @ Wt.0.643 Kg/mt)

with colour anodized alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x

31 2 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm 2,141.88 Sq.M.

Providing and laying 40 mm thick marble chips flooring rubbed and polished

(I.E.terrazo) to granolithic finish with under layer 30 mm thick cement concrete 1:2:4

(1-Cement: 2-coarse sand : 4-graded stone aggregate 10 mm and down

gauge) and to player 10 mm thick with white , black or white and blak marble cihps of

required sizes from 1 mm to 4 mm nominal size laid in cement marble powder mix 3:1

(3- Cement:1-Marble powder by weight ) in proportion of 4:7 (4- Cement:

7-marble chips by volume ) ( C) Medium Shade pigment with approx

50% white cement and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo rubbed , and

polished to Granolithic finish to player 6 mm white , black or white and black

marble chips of size from smallest to 4 mm nominal size laid in cement marble

powder mix 3:1 (3-Cement: 1 marble powder by weight) in proportion of 4:7 (4-

cement marble powder mix : 7-marble chips by volume ) ( B) Light shade pigment with

33 2 white cement (In top layer only) 869.4 Sqm

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and

34 2 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 908.17 Sq.M.

Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and

landing laid on a bed of 12 mm thick cement mortar 1:3 (1- cement :3-coarses and )

35 2 finishing with flush pointing in white cement. 960.47 Sq.M.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with

Computerised Golden Letters Discription as per instructions of engg . in

charge to M .S. frame structure for Inaugaration & Public Handover

36 2 Function (N.S.) 4,304.00 No.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring treads of steps

and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-cement:3-

coarses and) finishing with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting risers of steps

and dedo on 10 mm thick cement plaster 1:3 (1- cement: 3-coarse sand )

38 2 and jointed with white cement slurry 1130.15 Sqm

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-cement:3- coarse sand ) and

39 2 jointed with white cement slurry 1523.61 Sqm

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-

40 2 coarse sand ) finishing with flush pointing in white cement. 1,062.50 Sq. M.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

2 mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush pointing & cleaning the

41 2 surface etc. complete for antiskit 1383.99 Sq. M.

Providing and laying polished Kota stone slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-cement:6-coarses and) or L .M.1.1.5

(1-Lime putty :1.5-coarses and ) laid over and jointed with grey cement slurry

42 2 mixed with pigment to match the shade of slab including rubbing and 982.83 Sq.M.

Providing and laying marble stone slab flooring over 20mm (average)base of cement

mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand)

laid and jointed with gray cement slurry including rubbing and polishing complete. (A)

43 2 Marble slab 25mm thick 2194.63 Sq.M.

Providing and laying polished Kota stone slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid

over and jointed with grey cement slurry including rubbing and polishing

44 2 etc.complete. (B) 30 mm thick 1085.48 Sq.M.

Providing and laying polished kota stone slab 25 mm thick in risers of steps , skirting

Dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-Cement :3 coarses

and) and jointed with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarses

and:4-graded stone aggregate 20mm nominal size) laid in one layer and finished

46 2 with a floating coat of neat cement. (A) 40mm thick. 297.68 Sq.M.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarse

sand:4-graded stone aggregate 20mm nominal size ) laid in one layer and

47 2 finished with a floating coat of neat cement. (B) 50mm thick. 348.08 Sq.M.

Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto surface using white cement

including rounding off junctions and extending them up to 15 cm along the

wall, clearing with water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the size 300 mmx200

mmx8 mm/300 mmx450 mmx8 mm in skirting , risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1cement: 3 coarse sand ) & jointed with

49 2 white cement slurry. 1426.95 Sqm

Providing ridges or hips 600 mm overall in plain G .I. sheet class -3 fixed with

G.I. J or L Hooks and nuts 8 mm dia G.I. Limpet and bitumen washer complete .

50 2 (1) 0.80 mm thick sheet. 635.58 Sqm

Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet class-

3 gutter with Iron brackets 40 mmx3 mm size Bolts , Nuts, washers etc .

including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment with bitumen felt

consisting of second and fourth course of blown / bitumen or /and residual

bitumen applied hot at 1.2 kg.per Sq .M.of area for each course and first

course with fibre base bitunen saturated under lay type land third course with

fibre base self finished felt type 2 grade 1 and fifth and final course of stone grit

mm and down size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

Providing and fixing on wall face C .I. Rain water pipe including filling the joints with

spun yarn soaked in neat cement slurry and cement mortar 1:2(1- Cement :

53 2 2-fine sand) (A) 75 mm dia. 283.62 Rmt

Providing 15 mm thick cement plaster in single coat on Rough (Similar) side

of single or half brick walls for interior plastering up to floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C .M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over and including a

primary coat of white washing to give an even shade after through brooming the

surface to remove all dirt, dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a washing and scraping

and sand papering the wall surface smooth including necessary repairs to

57 2 scratches complete. 11.19 Sqm

Distempering with dry distemper of approved brand and manufacture (two coats)

and of required shade on wall surfaces of given an even shade, over and

including a priming coat of whiting after thoroughly brooming the surface

free from mortar dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even shade,

over and including a priming coat with distemper primer of approved

brand and manufacture after thoroughly brushing the surface free from

mortar dropping and other foreign matter and also including preparing the

surface even and sand papered smooth.

Extra Coat for Above Item over above for every subsequent coat of

60 2 approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

61 2 matter and sand papered smooth. 78.44 Sqm

Extra over item for every sub sequent coat of wall painting with plastic emulsion

62 2 paint of approved brand 33.39 Sqm

Extra over item for painting with plastic emulsion paint of approved brand on ceilings

62 a 2 and sloping roofs. 5.36 smt

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil, grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all dirt, dust

64 2 and other foreign matter. 86.94 Sqm

Painting one coats (excluding priming coat) on previously painted steel and

other metal surface with enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter.

66 2 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade including

67 2 cleaning the surfaceofalldirt,dust and other foreign matter. 64.66 Sqm

Painting one coats (excluding priming coat) on previously printed steel and

other metal surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

69 2 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat ) on external surface of new rain

water, soil, waste and vent pipes and fittings with ready mixed bituminous

brushing, black, anti corrosive to give an even shade including cleaning of all

70 2 dirt, dustand other foreign matter.(75 mm dia) 20.16 Sqm

Painting two coats (excluding priming coat ) on external surface of new rain

water, soil, waste and vent pipes and fittings with ready mixed bituminous

brushing, black, anti corrosive to give an even shade including cleaning of all

71 2 dirt, dust and other foreign matter.(100 mm dia) 25.05 Sqm

Painting two coats (excluding priming coat) on new wood and wood based

surface with enamel paint, interior to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter sand papering

and stopping. (a) Ready mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on previously painted wood and

wood based surface with enamel paint, to give an even shade including cleaning

the of all dirt, dust and other foreign matter.(b) Ready mixed paintbrushing priming for

73 2 enamel 26.78 Sqm

74 2 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and wood based

surface with ready mixed paint, brushing, oil, gloss, semi gloss to give and even

shade including cleaning of all dust, dirt and other foreign matters and

75 2 papering and stopping. 104.12 Sqm

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

76 2 complete 113.4 Sqm

Applying two coats of Birla (white cement based) or Asian (acryliclapy-

putty) or equivalent & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand papered

77 2 smooth. 40.19 Sqm

Painting one coats (excluding priming coat) on previously painted wood and wood

2 based surface with enamel paint, to give an even shade including

78 2 cleaning the of all dirt, dust and other foreign matter. 55.13 Sq.M.

Writing letter or figures on any surface with black japan paint (stops,

comas, hyphens and the like not to be measured and paid for separately ) per

(i) Block (Letters/Figures) (Per 10 Letter pet CM.HT) letter per

Demolition including stacking of serviceable materilas and disposal of

80 2 unserviceable materials with all lead and lift. (i) R.C.C. work 1047.38 Cu.M.

Demolition of Brick work and stone masonry including stacking of serviceable

materil as and disposalof unserviceable materials with all lead and lift.(ii) In Cement

81 2 Mortar. 544.95 Cu.M.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materil as and disposal of unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materil as and disposal of unserviceable materials

83 2 with all lead and lift.(i) G.I.sheet roofing. 47.25 Sqm

Dismentling steel work including distempering and stacking the materials

84 2 with all lead and lift. 2.42 Kg.

Dismentling doors , windows, ventilators etc . (wood or steel ) shutters

including chowkhats architraves , hold fasts and other attachment etc .

complete and stacking the material within all lead and lift .(i) Not exceeding 3 Sq.M.

85 2 in area. 185.85 Each

Dismentling doors , windows, ventilators etc . (wood or steel ) shutters

including chowkhats architraves ,hold fasts and other attachment etc .

complete and stacking the material with in all lead and lift .(ii) Exceeding

86 2 Sq.M.in area. 248.85 Each

Dismentling barbed wire in fencing including making rolls and also including

dismentling fencing posts including all earth work concrete in base and making

good the disturbed ground stacking useful materials as directed and

disposing as directed and disposing of the unserviceable materials

87 2 with all lead and lift. 66.15 Rmt

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings

and clamps including stacking the materials with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an

type, flushing tank etc. including stacking the materials with all lead and lift

Scraping oil paint from steel and other metal surface and making the surface

90 2 even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old deteriorated plaster of any thickness

from wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size as specified in

92 2 existing R.C.C. slab including cutting chase and making good. 168.53 Each

Cutting out cracks of roof terrace to V -section, cleaning out, wetting, grouting with

93 2 cement and sand slurry 1:3 (1-cement 3-sand ) 64.58 Rmt

Cutting out cracks roof terrace to V -Section cleaning out and filling solidly with

a hot mixture of bitumen and clean dry sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with frame using approved

quality anodised extruded alluminium section as approved by Engg .in

charge(Jindal alluminium)(a) Frame sections 101.6x44.45 mm (b) Shutter

bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c)

Shutter bottom section at 114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing chips on upper

pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed / Fully

Glazed Alluminium doors with frame using approved quality anodised

extruded alluminium section as approved by Engg . In charge .(Jindal alluminium )(a)

Frame sections 101.6x44.45 mm b ) Shutter vertical & top section

83.5x44.45 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom section at

x44.45mm at ( 1.37 kg/mt ) Shutter middle section at 100x44.3 wt. (1.37 kg/mt )

incl. providing & installing 5 mm thick Glass of standaed quality fixed /

mm thick Laminated sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc .

comp. as per Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4 track sliding / fix

type with frame using approved anodised extruded alluminium section as

approved by Engg. In charge .(Jindal alluminium) units equivalent .

including P /F installing 5 mm thick clear /tinted Glass of standard quality

97 2 etc.comp. 4,518.00 Sq. M.

Providing & Fixing in position Alluminium vents with frame using approved

anodised extruded alluminium section as approved by Engg . In

charge.(Jindal alluminium ) units equivalent Frame section of 63.50 x 38.50 mm.

(wt.0.68 Kg/Rmt) incl. Providing & Installing 5 mm thick Glass of standard

98 2 quality etc. comp. 4,218.00 Sq. M.

Providing and fixing of Ridge flashing for roof panel shall be made out

of 0.5 mm thick pre coated GI sheet . The Pre coatedsheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS :277:1992, 5-7 microns epoxy primer

on both side of the sheet and polyester top coat 15-18 micron. The PP GI

Sheet shall have plastic protective guard film of minimum 25 microns to avoid

scratches during transportation . The ridge shall be fixed to the steel members

by poprivetor self drilling/self stitching fastners @ maximum 450mm c/c along

length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-2 mm thickness

as per directed by engineer incharge etc as completed (N.S.)

Providing and laying 15mm bamboza wooden flooring as per architect 's

drawing with all necessary details as directed by the project consultants .

Use underlay for better result as per Detail specifications and directed by the

project consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M .S. Angle

posts 40 mm x 40 mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontan lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G .I, staples

including fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in C .C

102 2 1:5:10 etc complete. 385.4 Rmt

Renovation and Repairing work in Chainlink fencing any size and also

refixing work incl. febrication work with all materails to be painted one coat

of primer and twocoats of paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B. masonry

in C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm. thick cement plaster

to masonry / in C.M.1:3) and cement concrete flooring in 1:2:4: mix 5cm.dia.drain

104 2 pipe etc.complete. 2235.66 Rmt

Constructing a cooking platform 60 cm. width and 70 cm high resting on B .B.

Masonry walls 23 cm. thick in C .M. (1:6) with (i) Fixing or precast R .C.C.

1:2:4) 8 cm. thick slab with marble chips set in C .M. (1:6) ( 6 mm thick terrazo )

with plastering on exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for below ground

level to vertical upto any floor with delivery & suction Pipe & Pump etc. The rate

includes fule, pump operator, skilled labor, driver etc completed and as per direction

106 2 of engineer in charge 760 Cmt

P/A Tremix with dewartering machine and floater machine on constructed

CC work for finishing the surface as per requirement. The rate including all

machinaries, labor, loading, unloading, transportaion etc complete as per

direction given by engineer incharge.

Carrying out timber treatment to all wood work including drilling holes and spraying oil

based chemical solution on surface of timber work for termite control including labor

and material etc . complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III (1%

concentration by mass ) is recommended one litre chemical emulsion diluted with

liters of kerosene . Total diluted concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre chemical per one Sqmt

two coat on wood surface not protected by paint or varnish.

Applying general insecticide pest control treatment to floors , cupboards etc including

labour materials etc . complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II(

(0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters

2 of water application 0.5 litre chemical /Sqm of

109 2 surface is recommended as per I.S. 88.4 Smt

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consist ment with I .S. specification. Using Chlordene and Chior purfiles

EC. As Per 6131_paret-II Consentration Weight on percentis recommended

i.e one litre 20 EC chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication attherate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per IS

6313 part - II (1% concentration by mass) is recommended i.e one litre chemical

emulsion diluted with 19 liter oil base . Total solution will be 20 liters inclusive of one

liter chemical emulsion application at the rate of 7.5 litre chemical / Sqm of surface is

111 2 recommended as per I.S.S 37.34 Smt

Providing erecting and fixing double coated Syntex or equivalent

PVC.(ISI) water tank of required capacity each with all necessary fittings and

112 2 connection etc. complete on terrace. 3.91 Litre

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps including

113 2 making good the wall ceiling and floor.

2 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earth work in

114 2 trenches to be measured and paid for separately)

Making connection of galvanised Mild steel distribution branch with galvanised

mild steel main 50 mm to 80 mm nominal bore by providing and fixing tee

including cutting and threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure

poluthene pipes of the following out side Dia . Low densidy, complete

with special falnge compression type fittings ,wall clips etc .including

116 2 making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia . Low densidy, complete

with special falnge compression type fittings , wall clips etc . including

117 2 making good the wall ceiling and floor.

2 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C .I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100 mm inlet and

118 2 mm outlet.(C)100mm dia. 600.08 Each

Providing and fixing water closet squatting Pan (Indian type W .C.Pan)

size 580 mm (Earth work, bed concrete , foot rest and trap to be measured

and paid for separately) (A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous China European

water closet with integral P trap of "Cera" - Clair Series or equivalent

incl. seat cover , Chair Bracket etc. complete as per direction of engg. In

120 2 charge.(N.S.) 4,250.00 No.

Providing and fixing wsh down water closet (Europe an type , W.C.Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar1:1 (1- Cement:1-fine sand ) (Seal and cover to be measured and paid

forseparately) (A) vitreous China Pattern :(i) in white colour

Provdg. & Fixing Flat Back Large Urinal of White / colour of "Cera" or " Hindware"

incl. C.P. Brass waste coupline , waste pipe , pvcconnection etc .

122 2 Complete.( size 635 x395x420 mm ) 1,850.00 No.

Providing & Fixing Angle cock of " Ess Ess" - Trend series or equivalent

standard make as approved by engg. in charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water closet squatting pan

124 2 including jointing the trap with the pan and soil pipe in cement Mortar1:1 (1- 311.85 Each

Providing and fixing wash basin with single hole for pillar tap with C .I.or M .S.

brackets painted white including sutting holes and making good the same but

excluding fittings . (A) Vitreous China : (ii) Flat Back wash basin 550 mm x v 400 mm

125 2 size.(i) In white colour. 1400.18 Each

Providing and fixing Kitchen sink with C .I. or M .S. brackets, painted white

including cutting holes in walls and making good the same but excluding

fittings. © Vitreous China Sink. (i) 600 mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior

glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixing to wooden

127 2 pluge with C.P. brass screws and washers. 825.48 Each

Providing and fixing chromium plated brass halftrun flush cock of approved quality

128 2 including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash basin with signle

hole for pillar tap of "Cera " - Concord series of 550 x425 mm size to be fiited in

stone counter with necessary brackets painted white incl . cutting holes and

making good the same .Cost Includes P /F C .P. brass waste coupline , 32 mm

dia fisher union ,15 mm dia . Pillar cock & Angle cock of " Ess Ess"- Trend series

,32 mm dia. Waste pipe etc. complete as per dir. of engg. in charge.

Providing and fixing washbasin with single holefor pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making goodthe same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In white

130 2 colour. 1400.18 No

Providing & Fixing S .S.304 Grade Sink of Nirali / Krishna or Equivalent

Make for Kitchen Platform of size : 24":x18" as per Direction of engg . In

131 2 charge 4,650.00 No.

Providing and fixing C .P. brass towel rail comlete with C .P.brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C .P. brass bracket and

guard rail complete mixed to wooden plug with C.P.brass screws.

134 2 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A) Brass screw down

135 2 bib tap polished bright.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B) Brass chromium

136 2 plated screws down Bib Tap.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. © Gun metal screw

137 2 down bib tap.

2 (i) 15mm dia. 157.29 Each

2 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down high pressure with

138 2 screws, shanks and back nuts.

2 (i) 15mm dia. 305.67 Each

2 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway wheel valve.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 201.8 Each

2 (III) 25 MM DIA 416.47 Each

2 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock of approved

140 2 quality including fixing in pipe line etc. complete.

2 (i) 20mm dia. 252.26 Each

2 (ii) 25mm dia. 261.16 Each

2 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality including conecting

the Urinal with waste pipe , tap etc .complete. (A) White earthen ware flat

back or corner type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality including connection

with trap and with integral longitudinal flush pipe. (A) Squating plate pattern

142 2 white earthen ware 550mm x 300mm. 1535.63 Each

Providing and fixing chromium plated, bottle trap with necessary couplings of

143 2 approved quality for wash basin. 292.87 Each

Providing and fixing ball cock ofapproved quality as directed . (A) Copper Metal

144 2 (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved quality as directed . (B)Abonite (i)

145 2 25mm dia. 101.89 Each

Filling with good Quality thor as and where directed by the Architect /

Engineer-in-charge, in sunk in layers of 15 cm. thickness, including watering

ramming well etc. complete, as directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge . Pipe shall be

fixed on the wall with the help of clamp at every two metre C /C or shall be

concelled as directed including necessary fittings etc . including testing of pipe

and joints and fixing the same with solvent , including cost of all

147 2 materials.adhesive 71.93 Rmt

Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME/ ASTRAL/

FINOLEX orequivalent as approved by Engineer In Charge . Pipe shall be

fixed on the wall with the help of clamp at every two metre C /C or shall be

concelled as directed including necessary fittings etc . including testing of pipe

and joints and fixing the same with adhesive solvent , including cost of all

148 2 materials. 90.93 Rmt

Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge . Pipe shall be

fixed on the wall with the help of clamp at every two metre C /C or shall be

concelled as directed including necessary fittings etc . including testing of pipe

and joints and fixing the same with adhesive solvent , including cost of all

149 2 materials. 117.97 Rmt

Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge . Pipe shall be

fixed on the wall with the help of clamp at every two metre C /C or shall be

concelled as directed including necessary fittings etc . including testing of pipe

and joints and fixing the same with adhesive solvent , including cost of all

150 2 materials. 146.65 Rmt

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge . Pipe shall be

fixed on the wall with the help of clamp at every two metre C /C or shall be

concelled as directed including necessary fittings etc . including testing of pipe

and joints and fixing the same with adhesive solvent , including cost of all

a 2 materials. 193.73 Rmt

Providing in line level plumb , fabricating and fixing three row horizontal

barbed wire fencing and punched tape concertina coil of 9 turns per meter of

610 mm dia fixed with clips on top of the angle iron posts . The punched tape

concertina coil having sharp barbs at every 25 mm spacing shall be 0.5 mm thick

and 19 mm width and weighting 13 kg/100 mt. (Average) as per manufacture 's

specification. The rate shall also include providing and fixing 1.20 mt.total

long MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing embaded in RCC column

angle posts shall be painted with one coats of red oxide and two coats of enamel

paint of approved quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as as directd by engineer

152 2 In Charge.(Market rate) 850 Smt

Providing & Fixing 3 mm thick F .R.P.sheet of Approved Quality & Color /

Pattern as per Consultant 's design also includes required fabrication structure

in the grid of 2'-0x2'-0 size using hollow pipe of 16 gauge & size 2"x1" & 1"x1"

,G.I. & Bitumen Washers, Silicon paste application for fixing the sheet . Rate

also includesnecessary bending , cutting, labor charges , Zinc Primer coat & Two

coats of oil painting of color as approved by consultants & making good the wall .

Providing 2 mm thick F .R.P. Gutter with necessary M .S. Supporting Brackets .

Hiring charges for J .C.B.machine inclduing cost of fuel , operator, dirver etc ..

155 2 ( 12 hours sift day/night) (N.S.) 600 Hrs.

To provide tractor with hydraulic trolley , driver, 4 Nos. of Labor with all tools like

bucket drum, showels, trikam, pavadas, etc,, to carryout different

works during monsoon for 12 Hrs. Shift. Work shall be carried out as per the

instrucitons of Engineer In-Charge.No extra charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain fixed on window level

on wooden batten and curtain lift with cotton thin rope, make of

aerolax or equivalent design and colour as per instruction by engineer – in –

Charge with necessary hardware fitting, material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of 765 number) Hardwire or

158 2 Everite Prabhat or Equivalent 474.58 No.

Providing and fixiing M .S. Fan clamps type 1 of 16 mm dia M .S. bar bent to shape

with hooked ends of R .C.C. slabs during laying incl . painting the exposed protion of

159 2 loops, all as per standard design complete. 124.74 No.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1

160 2 including neat cement finishing, watering etc. complete. 23.45 Rmt

161 2 Making Water connection from exi.Muni. Water line (N.S.) 250 No.

Providing and applying fibere reinforced cementitious micro concrete

work in cellings and beams incl.mixture of CEMSCREED HM

(F) fair mate company material, FBR bonding agent material with water

in suItable proportion anti corrosive treatment on exposed beam,celling steel bars

with safeCore R incl.all kind of labour etc.comp.including three coat of

white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps

withmotor and required cable and switch board of approved brand and make

163 2 etc.comp.as directed. 6,800.00 Set

.Providing TMT Bar FE 415 reinforcement for R .C.C. work including bending , binding

163 a 2 and placing in position complete up to floor two level 66.59 Kg.

ProvidingTMTBarFE500/500Dreinforcement for R .C.C.workincluding bending ,binding

and placing in position complete upto floor two level placing in position complete upto

floor two level placing in position complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door shutter (sintex door -

equivalent) with necessary alluminium fitting with EL-7 section frame

Conveyance charge of Earth ,Lime, Murrum, building rubbish earch manure or sludge

and excavated rock and fly ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in risers of steps , dedo

and pllars laid on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand ) and

jointed with gray cement slurry including rubbing & polishing etc.complete.

Providing and laying 15mm bamboza wooden flooring as per architect 's

drawing with all necessary details as directed by the project consultants .

Use underlay for better result as per Detail specifications and directed by the

project consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or Asian (acryliclapy-

putty) or equivalent & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing the

169 2 surface free from mortar dropping 40.19 Sq.M.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape evenshade after thoroughly brushing the surface to remove all

170 2 dirt, and remains of loose powdered materials.etc complete 113.4 Sq.M.

Providing and fixing flush door shutters , solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face

panels, with both side 1 mm laminate finishing including anodized aluminum

butt hinges with necessary screws . Decorative type and pine wood core

anodized minimum 3 no 150 mm long aluminum butt hinges in flush door

shutters with 2 no of brass holdfast 325 mm long 1 no brass tower bolt 250 mm

long and two no of 150 mm long brass door handle . Decorative both side

laminated Flush door 35 mm thick. with frame of 10 cm x 7 cmt Indian teak

wood frame including all necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to 45 mtr from GL etc

complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in charge

same as lal darwaja garden pattern consisting of 3'dia. M.S black pipe 'A' class 5'4"

ht. fixed at 8'9" c/c in C .C 1:2:4 block of 9"x9"x9" size chain link jali of size 2"x2"x10

gauge fixed in 35x35x5 mm MS angle frame 8'x4' size with MS flat of size 25x3 mm

welded jali etc .comp.The jali is to be welded to MS pipe with MS flat as instruction

given.The M.S pipe and the M.S angle frame are to be painted one coat of primer and

two coats of paint as directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone with well dressed

grooveas per directed by engg .in charge for foundation , plinth or super structure level

(above plinth level upto floor two level ) in cement mortar 1:5 (1-cement : 5-fine sand )

incl.pointing the joint with white cement and yellow oxide powder in proportion to

match stone colour the joints should be thread grooved as per exi . lake stone pitching

173 2 apperance

2 (A) stone masonary wall/stone dressed single faced (size 15"x8"x9") 8,990.00 Cmt

2 (B) stone coping (size 15"x8"x4") 510 Rmt

2 (C) stone coping (size 15"x8"x9") 790 Rmt

2 (D) stone column (size 15"x15") 10,710.00 Cmt

2 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb block for

Footpath in M -20 grade using 20 mm nominal size black trap aggregate of

Sevaliya/Timbaor equivalent quality for pre -cast blocks

reasonablyexposed finish/ formwork , mould with well equippedwith

vibratory system for kerb stones of approved design including curing , etc.

complete, including thecost of formwork etc . complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerbstones in line and level

on 5 cm thick sand bedding withnecessary equipments and

materials. The rate shall also include the flush pointing in CM (1:3) for all joints of

thekerbstones. Filling of zari alone the sides of the kerbstone fixed with

Bituminous concrete Bituminousconcrete / C.C. mixed in proper position to

flush withthe road surface as directed by Engineer in change to form a

portable mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block Grey /Coloured 60 mm thick, M-

35 Grade of any size shape (Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath ,parking areas, service lanes and other

areas as mentioned in the drawing / instruction of engineer in charge . Cost includes

formworks using rubber mould , Rate providing and laying paver blocks as per

required grading and specification. The paver block shall be mechanically compacted .

The work of paving blocks shall be executed in line and level by skill mason of

flooring work only . It should be laid in such a way that the no cutting of the paver

block to be necessary . if cutting of paver block necessary then it should be cut by

machine only and carting . The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be allowed for production .

Laying on 5 cms thick sand

Provoding and fixing flush door shutters , solid core construction with frame of first

class hard wood with cross board and face veneer or ply wood face panels , including

anodised alluminium butt hinges with necessary screws . (B) Non- decorative type and

block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of paving with cement pointing in CM 1:2,

including watering, ramming etc comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the C.C.Block / Nibhada Stone in

177 2 Line & Level 78 Smt

Box type metal letters forming composite box made from 1mm thick stainless steel

plate of grade 304 having brush finish of following font size to be fixed at Main Gate in

english and or Gujrati and including fixing charges approved before fixing by clent /

178 2 consultant.

A 2 400mm high 1,000.00 Nos.

B 2 300 mm high 750 Nos.

C 2 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections , power pressed from M .S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive ) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre , one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G .I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

mm centre to centre , shall be fixed in a direction perpendicular to G .I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long G .I. wire at

every junction , including fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall /partition with

the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter channel

with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing

and finishing to a flush finish of tapered and square edges of the board with recomme -

nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer ’s specification and also including the cost of making

openings for light fittings , grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed , all complete as per drawings , specification and direction of

the Engineer in Charge but excluding the cost of painting.

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x 500 x 50 mm, Size

per color End Cape 350 MM x 175 MM x 50 MM TOP DESIGN - Lining Top flat ANTI

SKID PATTERN FOR GRIP COLOUR :- YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :- 20 MT Fitting (

Fixing on TRAKE ) :-4 holes & END CAPE :- 2 HOLE HEX Bolts with Washer Epoxy

for Bolt Fitting etc. complete as directed by EIC .

Providing and fixing of Roller blind curtain /blackout. The fabric shall be woven from

formulated platisol extruded over a polyaster yarn .The fabric shouldl be weaved to

provide subtle view of the side of the blind and should offer elimination of glare and

sunlight radiance upto a minimum of 80%.The fabric shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false ceiling with grid type with

aluminium frame from gypsteel, fastners ,props, Finishing as per architectural

drawing allowing openings for A.C. Diffusers, Light/Electrical Points etc

–complete, Prior to fixing on frame.(Brand : Anutone or equivalent ) (N.S.)

182 2 or as directd by engineer In Charge. 933 Smt

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight G .T.Stone

including fixing of covervSquare mouth trap 100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement mortar 1:1 including

184 2 neat cement finishing, waterin getc. complete. 23.45 Rmt.

Providing and laying (to level or slopes ) and jointing with stiff mixture of Cement

Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and

185 2 joints complete.(A) 100mm dia. 211.05 Rmt.

Providing and laying (to level or slopes ) and jointing with stiff mixture of Cement

Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and

186 2 joints complete.(B) 150mm dia. 288.23 Rmt.

Constructing brick masonry chamber for underground C .I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C .M. 1:5 C.I.

cover with frame (Light duty ) 455mm x 610mm intenal dimensions total weight of

187 2 cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 2903.89 Each

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep

for pipe line with one or two inlets.

Providing, supplying and fixing precast C .C. blocks (M-20) edge kerb having size of

75 x 300 x 300 mm depth and as per design conveying it to the site , jointing into C :M

1:3 and racking out the joints incl . necessary excavation of asphalt , soil

189 2 etc..completed. 219 Rmt.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black Granitee 30mm thick

laid on precast R.C.C. (1:2:4) slab with plastering on exposed faces of wall in C.M.

190 10 (1:4) etc complete 754.95 Rmt.

Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or weight not

less than 7.75 kg. per Sq .M. to window frames etc . including60 x 20mm beading of

191 10 teak wood. 754.65 Smt

Providing & fixing 15 cm wide chicken mesh jali with nails & then application of 15 mm

192 10 plaster on R.C.C.& masonary joints as per dir.of engg.in charge 35 Rmt.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size ) laid in one layer and finished with a

193 10 floating coat of neat cement. (A) 50mm thick. 348.08 Smt.

Providing and constructing , Underground (U/G) water tank of specified capacity

on specified location , for all depths , in controlled CC of M -200 grade with bottom

slab, top slab and RCC walls , including cost of form work and reinforcement ,with

inside and outside plaster in CM 1 :3 and water proofing treatment as per IWP

specification,including injection , grouting, etc. complete. The rate includes for

providing and fixing two nos . 0.6m. x 0.6 m. size medium duty CI manhole cover /s

at top, including wash out pipe line and inlet and outlet connections etc. complete.

194 10 6.5 Litre

Providing and fixing PVC Printed pain colour false ceiling with grid type with

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized alluminium T section of size

x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x

(600 x 600mm) The alluminium frame work is supported from the cceiling with the

help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper

level etc . The aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x1 (25 x 25mm) angles etc. complete as per direction

of Engineer in charge. Manufactures specification and drawing.

Providing and supplying of labour for necessary manual excavation, cleaning,

Shifting of Material Or any other, or for any other work as directed by Engineer In

196 10 charge. The Rate includes Handcart with Mazdoor 551 No

A 10 Mukadam/supervisior/karigar 425 No

B 10 Fitter/Plumber/Mason 697 No

C 10 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including cost of welding rods/gas,

D 5 Transportation, including carting from site to work place. 1500 No

E 12 Mazdoor at Day Female 450 No's

E 12 Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or asphalt demolishing work on

site by using operator, fuel, power supply etc.complete as directed. (no payment

should be allowed for non working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break down work) (Based on

197 5 Previously approved rate by CE sir ) 1071.42 Shift

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fittings and clamps including making good the

198 10 wall, ceiling and floor etc. complete.

A 2 15 MM DIA 165.21 Rmt

B 2 20 MM DIA 202.97 Rmt

C 2 25 MM DIA 247.25 Rmt

D 2 32 MM DIA 330.36 Rmt

E 2 40 MM DIA 437.66 Rmt

199 2 50 MM DIA 647.3 Rmt

Supplying and fixing C .I. cover 300mm x 300mm without frame for Gulley trap

200 2 (Standard pattern) te weight of cover to be not less 4.53 Kg.) 491.8 Each

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia . Low densidy, complete

with special falnge compression type fittings , wall clips etc . including

201 2 making good the wall ceiling and floor. 0

Filling available excavated earth(excluding rock) in trenches. plinth, sides of

202 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 129.1 cumt

2 disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidating

15 and dressing complete

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete

Filling in Sunken Portion with good Quality Aerated light weight concrete block

having crushing strength not less than 35 kg/sqcm and where directed by the

Architect / Engineer-incharge, in sunk in layer. including watering, ramming where

it is required etc. complete, as directed by the Architect / Engineer-in-charge .

Providing and applying fibre reinforced elastomeric liquid water proofing

membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of

on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1)

206 and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of 562.4 sq mt

complete application/system not less than 500 microns).

The operation shall be carried out after scrapping and properly cleaning the

surface to remove loose particles with wire brushes, complete in all respect as per

the direction of Engineer-in- Charge.

Providing and laying integral cement based water proofing treatment including

207 preparation of surface as required for treatment of roofs, balconies, terraces etc 1150.48 sq mt

2 consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-

in-charge over the RCC slab including adjoining walls upto 300 mm height

including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm

size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of junctions of walls and

(c) After two days of proper curing applying a second coat of cement slurry using

2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS

: 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water proofing compound conforming to IS :

2645 and approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test.“All above operations to be done

in order and as directed and specified by the Engineer-in-Charge :and shall be

guaranteed for minimum period of 10 years after handing over the completed

building by the main contractor to be finished as directed. Stamp

paper guarantee 10 years to be furnished before receiving any payment from the

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Supply and Fixing of Auditorium seating Fabricate Auditorium seating with

Synchronized Push back Chair with Ergonomically designed Poly Urethane foam

for seat and back made my DOW chemical with High Pressure moulding

technology to achieve long life performance , upholstered with stitched 3 Layer

100% Yarn Dyed fabric Upholsteries . Chair profile with the seat in Normal position

and without a tablet arm should not be more than 75 cm. Chair pushback

mechanism should consist of 2 nos. x DIA 50 mm ZYTEL Based Rollers which is

supported by AXIAL shaft of DIA 12 mm is Driven by radial movement of 4 set of

Swing Arms of size 25mm x 6 mm thickness with

Orbital Riveted Solid Dia 8 mm Barrel MS Rivets . The pushback movement is

208 1.00 achieved by synchronised movement of 04 links mounted on Two Number of 9990.00 No

triangular Symmetrical housing of size 27 cm x 23 cm duly embossed for extra

strength by 1.2 cm made up by 0.12 cm CRCA compliance to IS 513. The entire

mechanism should be made in India and should have total weight 8.5 kg duly

Powder Coated – NO SPREAY PAINT Part should be used for the chair of The Seat

Size should be 42 cm x 48 cm the Back height should be 70 cm with ergonomically

designed seat and back cushions . Chair should be available in 20”, 21”, 22” and

23” to use multiple seat size in one layout for

matching variable arch length . Approved Make WIPRO , Godrej, TSI, HNI,

Featherlite (Including Fitting and Transportation)

Providing and Fixing Box type metal letters forming composite box made from

1mm thick stainless steel plate of grade 304 having brush finish of following font

209 83.9 size to be fixed at Main Gate in english and or Gujrati and including fixing charges. 93.85 SQ.INCH

etc. complete as per direction of Engg. incharge. for Payment Purpose Height of

Letter will be measured. (up to 300 mm height)

Providing and fixing 2 mm Aluminium/4mm ACP Sheeting fixed with Type 11 class

c high intensity grade sheeting as per IRC 67-2012 reflective sheeting of size