CA NO GE(S)AMB 46 2019 20 REPAIR REPLACEMENT OF TILING JOINERY ROOF SHEETING AND WELCOME MAINT BR AND EM WORKS IN OFFRS MD QTRS AND HERITAGE MESS AREA IN SOUTHERN ZONE UNDER GE SOUTH AMBALA CANTT

Amount

Material and labour for preparation of old decorative surface of wall etc by washing rubbing down including scrapping and applying one coat of cement base paint of any tint complete all as specified and directed.

Material and labour for preparation of old decorative surface of wall including washing rubbing down and stopping of distempered and painted surfaces and applying one coat of interior emulsion (White / tint) complete all as specified and as directed.

All as per item 2.00 above but as on ceilings complete all as specified and directed.

M&L for complete removal of existing treatment of walls/ceiling and applying two coat of interior emulsion over a coat of primer including over a layer of Birla wall care putty including rubbing, cleaning to obtained smooth finish complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying one coat of exterior plastic emulsion coloured complete all as per manufacturers instructions and as directed.

Preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed.

Preparation of old treated surfaces (Plastered or un-plastered) of walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash, complete all as specified and directed.

Preparation of old treated surfaces (Plastered or un-plastered) of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts, treating oil and greasy spots etc. and applying one coat of white wash on ceiling, complete all as specified and directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for keys, scrubbing down with water etc. of any thickness including dado any description, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of edges over and including screed bed or bedding layer in cement mortar (1:6), 15 mm thick complete all as specified and directed.

S&F for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone over and including a layer of cement plaster 10 mm thick in CM (1:4) on fair faces of brick work or concrete sufaces finished even and fair W/O using extra cement including grinding and polishing complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Description all as per Sl item No 14.00 here in before but two coats of synthetic enamel paint, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Description all as per Sl item No 16.00 above but two coats of synthetic enamel paint, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish outside MOD land etc., complete all as specified and directed.

S&F vitrified Double charge premimum quality ceramic tiles 10-12mm thick of light shade (Square/rectangular ) polished area of each tile exceeding 0.42 sqm but not exc 1.00 sqm (Size 1.00 x 1.00 m) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layers in cement mortar (1:4) base complete all as specified and directed.

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in cement mortar (1:4) base, complete all as specified and directed.

M&L for premium quality, glazed coloured ceramic tiles 300 x 450 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Description all as per Sl item No. 22.00 here in before but 20mm dia complete all as specified and directed.

S&F Steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Description all as per Sl item No. 24.00 here in before but 20mm dia GI pipe, complete all as specified and directed.

Refixing GI tubing 15 mm bore including all necessary fittings to walls/ceiling or laid in floors, complete all as specified and directed.

Description all as per Sl item No. 26.00 above but 20mm dia GI pipe complete all as specified and directed.

S&F in repair for PVC water storage tank 500 Litre capacity HDPE double layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified.

S&F in repair for PVC water storage tank 1000 Litre capacity HDPE double layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified and directed.

Supply and fixed (in repair) stop valves, cast copper alloy ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions, suitable for 20 mm bore tubes, complete all as specified.

S&F (in repair) stop valves, cast copper alloy ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions , suitable for 15 mm bore tubes, complete all as specified and directed.

Supply & fixed (in repair) 15mm fancy type, chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified.

Supply & fixed (in repair) stop cock, fancy type, chromium plated, long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified. (Note : Weight of stop cock shall not be less than 0.575 Kg) (Note : Weight of stop cock shall not be less than 0.575 Kg)

Supply & fixed (as in repair) for bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified.

S&F (in repairs), vitreous chainaware Dome (S-30) concealed floor trap mounted, starwhite colour, EWC pedestal pattern alongwith and including premoulded vitreous china ware cistern, seat cover complete all as specified and directed.

S&F (in repair) vitreous china wash down water closet pedestal pattern, coloured including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed.

Supply & fixed (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified.

Supply & fixed in repair 10 litre capacity virgin polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified.

Supply & fixed, in repair wash hand basin mixer (Hot & old), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, in repair complete all as specified.

Supply & fixed, in repair wall mixer (Hot & old), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, in repair complete all as specified.

M&L for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) (brick walls) in cement mortar (1:3), complete all as specified and directed.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified and directed.

Description all as per Sl item No 42.00 here in before but area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed.

Taking down shutter of any descritption n exc. 1.00 sqm each including removal from site complete all as specified and directed.

Ditto as item No. 44.00 but exc 1.00 sqm but not exc 2.00 sqm each complete all as specified and directed.

S&F Factory made pressed steel frames for doors fabricated from 1.25 mm MS thick sheet, with double rebate including necessary lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 125 x 60 mm, complete all as specified and directed.incldg. PCC filling in back of chowkhat using 12.5mm size of aggregate and hold fasts, incldg. sanding tarring complete all as specified and directed.

S&F Factory made pressed steel frames for doors fabricated from 1.25 mm MS thick sheet, with double rebate including necessary lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 165 x 60 mm, complete all as specified and directed.incldg. PCC (1:2:4) filling in back of chowkhat using 12.5mm size of aggregate and hold fasts, incldg. sanding tarring complete all as specified and directed.

S&F for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L IInd class hardwood (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.2(a) supplt and fixed to choukats complete all as specified and directed.

S&F for galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with finned tacks or galvanized wire staple complete all as specified.

S&F in repairs galvanized mild steel wire cloth with 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with finned tacks or galvanized wire staple complete all as specified.

Hacking out old broken glasses (any thickness/type and in any position) from wooden frames/metal frames fixed with oil putty or beads etc. and removing from site all as specified.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed.

S&F Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete.Make : Manufactured by Ram Fabricators Pvt Ltd Panchkula (Hr.) or M/S TEE PEE Enterprises Ludhiana (Pb.)Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery ,grills 10mm square bars (iii) Glazing, wire mesh & painting grill shall be measured & paid for separately.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-410-O or Fe-310-O complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded mechanically crushed stone aggregate) as in bed blocks for hold fasts, complete all as specified and directed.

S&F factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.

S&F factory solid PVC moulded door shutter, 28 to 30mm mm thick (style) , with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, with particle board core including three Nos. aluminium hinges for each door complete all as per manufacturer instructions complete all as specified and directed.

S&F factory made 28 mm thick PVC moulded door shutter as in kitchen cabinet with particle board core, with 2mm thick moulded pre laminated PVC sheet on the front face and 2mm plain colour PVC sheet on back face, 5 mm x 25 mm PVC sheet beading on either side including two Nos. aluminium hinges for each door complete all as per manufacturer instructions complete all as specified and directed.

S&F aluminum anodized, barrel tower bolts of extruded section 200mm long ISI marked complete all as specified and directed.

S&F in repairs 150 mm helical door spring to mild steel chowkhats, complete all as specified and directed.

S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed.

S&F mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified and directed.

S&F extruded aluminum alloy handles, fabricated type, anodized 150mm long, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

S&F block board 19 mm thick medium density flat pressed single line layer type or three layer type with BWR type adhesive fixed with screws to timber frame work as in , cup board shelves & mild steel realing with supported in drawar etc complete all as specified and directed.

All as per item No. 66 but over Decorative laminates 1.5 mm thick type I, or surface finish, colour and pattern(sunmica) as approved complete all as specified and directed.

S&F mild steel 25 mm tubular rod, 1.6mm fancy type including PVC golden colour brakets,latto and wall to wall socket etc complete all as specified and directed.

S&F (in repair) stainless steel plate rack size (900x900mm) of standard size, weight not less than 5kg, complete all as specified and directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm Double Bowl complete all as specified and directed.

M&L for CP grating 75 mm dia with or with out hole complete all as specified and directed.

M&L for CP grating 100 mm dia with or with out hole complete all as specified and directed.

S&F in repairs PVC seat cover with hinges complete all as specified and directed.

S&F in repairs CP Jet spray complete all as specified and directed.

Cleaning and removing all scale and dirct, etc form existing watre storage tank of capacity exc 500 litre and n.exc 1000 litre by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from the tank including cleaning from mouths of circulations pipe, complete all as specified and directed.

Cleaning and removing all scale and dirct, etc form existing watre storage tank of capacity exc 250 litre and n.exc 500 litre by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from the tank including cleaning from mouths of circulations pipe, complete all as specified and directed.

Dismantling of PVC (SWR) pipes any length complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes type 'B' single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes type 'B' single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S&F 110mm bore PVC ( SWR) pipes type 'B' single socketed ,in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix PVC (SWR) bends any radius, for 110mm bore of pipe complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal of radius 110 mm bore. complete all as specified and directed.

Supply and fixing 75 mm outlet dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent complete all as specified and as directed.

S& F in repairs stainless steel grating suitable for 75 mm bore dia pipe complete all as specified and directed.

Supply and fixing PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring fixed to wall with suitable size MS clamp and nut complete all as specified and directed.

M& for Plywood, grade BWR, type BB, 9mm hickness, fixed in repairs with screws to timber frame work complete all as specified and directed.

Supply and fixing in repairs Mild steel harrison rail, chromium plated with fixed brackets, stops, rollers etc complete all as specified.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling including of fixing on wall to make PVC frame as per specifications and drgs, complete all as specified and directed.

Supply and fixing solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing , complete all as specified and directed.

Running welding in repairs thickness of metal to be welded not exceeding 6 mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, in the case of metal exceeding 3 mm thick complete all as specified and as directed.

E/M PORTION Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardent Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic, heavy duty PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint over a coat of red oxide primer internally and externally including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch ncluding 1.5 sqmm single core PVC insulated and unsheathed FRLSH copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point controlled by one switch complete all as specified and as directed.. Notes :- Switch, socket and fan regulators to be measured and paid for separately. PVC Conduit confirming to IS 9537 part I & III NOTE : - (All chases will be cut by chase cutter only)

Description all as per item No 92.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 92.00 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

All as per srl item No 92.00 above but point wiring for onesocket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Description all as per serial item No. 92.00 here in before but for one bell point controlled by one bell push complete all as specified and directed.

Point wiring complete concealed with 1.5 sq mm single core PVC insulated,unsheathed FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through existing concealed condiuit including provision of 1.5 sq mm copper wire green colour as earth continuity conductor and connected to common earth dolly including pressed steel terminal boxes suitable for fixing switches /sockets etc complete all as specified and directed. Cable make : - RR/Polycab/Plaza or equivalent model in makes mentioned in Appx 'B'.

Description all as per item No 97.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 97.00 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

All as per srl item No 97.00 above but point wiring for onesocket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Supplying & fixing modular switch, single pole one way 5/6 Amps, one module, 230 volts AC circuit complete all as specified & directed by Engineer-in-Charge. Make : Indo Asian/ Anchor/Legrand or equivalent model in makes mentioned in Appx 'B'.

Supplying & fixing modular switch, single pole one way 16 Amps, 230 volts, one module, AC circuit complete all as specified & directed by Engineer-in-Charge. Make : Indo Asian/ Anchor/Legrand or equivalent model in makes mentioned in Appx 'B'.

Supplying & fixing modular socket outlet, 6 Amps, 5 pin, 230 volts AC, 2 module circuit complete all as specified & directed by Engineer-in-Charge. Make : Indo Asian/ Anchor/Legrand or equivalent model in makes mentioned in Appx 'B'.

Supplying & fixing modular socket outlet, 6-16Amps, 3 pin, 230 volts, 2 module AC circuit complete all as specified & directed by Engineer-in-Charge. Make : Indo Asian/ Anchor/Legrand or equivalent model in makes mentioned in Appx 'B'.

Supply and fixing switch piano 5 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing switch piano 15 Amps flush type one way 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing bell push 5 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing socket outlet 3 pin 6 amps, 230 volt. flush type, ISI Marked, complete all as speciied and directed.

Supply and fixing socket outlet 2 in 1, 6 pin 5 /16 Amp and multi pin flush type, complete all as specified.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fixing (in repair), fan regulator electronic step type(socket type), 230 Volts, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified.

Supply and fixing door bell electric ,ding dong type, single phase 230 volts, ISI marked complete all as specified.

Supply and fix LED bulb 7W, 625LM B22 6500K

Supply and fix LED bulb 9W, 625LM B23 6500K

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.

Disconnecting and taking down old existing light fitting of any description and in any position and Supplying & fixing indoor decorative FLARE PLUS LED batten with opal diffuser tube light fitting including LED tube 20 watt high efficient aluminium housing with clear and milky diffuser, connecting the same to ceiling rose with using PVC sheathed and insulated three core copper conductor cable of size 0.50 Sqmm, including all accessories for fixing arrangement for fixing the light fitting to walls / ceiling surface complete all as specified & directed at site. MAKE : - Havells - Batten Cat Part No : QUPTOIX22WSSBSWH Tube Rod Cat Part No : 20WLED865SGLASS / Halonix / Wipro / Philips or equivalent model in makes mentioned in Appx 'B'.

Disconnecting and taking down old existing light fitting of any description and in any position and supplying & fixing, decorative surface mounted high out put diffuser mirror light fitting LED of 10 watt ,230 V with all acessories pre wired up to terminal block including connecting with 3 core copper conductor flexible cable from terminal box to the ceiling rose to connector of the light pointall as specified and directed. MAKE : - Havells Cat Part No : BS10WLED / Halonix / Wipro / Philips or equivalent model in makes mentioned in Appx 'B'.

Disconnecting and taking down old existing light fitting of any description and in any position and S&Fenergy saving LED light fitting 10 Watt Bulk head luminaire pressuredie cast aluminium housing, high efficient LEDs and enclosed with milky diffuser complete with all acessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size 230 Votls complete all as specified and directed. MAKE : - Havells Cat Part No : 10WLED860SSYMTOPL / Halonix / Wipro / Philips or equivalent model in makes mentioned in Appx 'B'.

Supply and fixing in replacement bracket for security light made up of 25mm dia,1.20m long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Disconnecting and taking down old unserviceable security light fitting of any description and in any position andSupplying & fixing of 25 W LED Security Light luminaire made up of pressure Die Cast aluminum housing and enclosed with toughened glass IP66 protection. The luminaire shall have to get sufficient light output from luminaire. LED Street Light shall use multiple LEDs of less than 2W Class and shall have optical grade polycarbonate lens to provide street light distribution. The LEDs shall be driven at minimum 480mA. The Input voltage range shall be 150V to 270V complete including connecting up 3 core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete. MAKE : - Havells Cat Part No : 25W LED 757 SASYTOPC / Halonix / Crompton or equivalent model in makes mentioned in Appx 'B'.

Disconnecting and taking down old existing light fitting of any description and in any position and Supply and fixing in replacement post top lantern LED 25 watt, cast aluminium spigot, with high efficient LEDs and poly carbonte diffuser, including LED Lamp 25 Watt suitable for housing in, IP 65 protection complete with accessories.connecting the same with using PVC sheathed and insulated three core copper conductor cable of size 1.50 Sqmm, for fixing the light fitting complete all as specified & directed at site. MAKE : - Havells Cat Part No : 25W LED 757 PSYMTOPC / Halonix / Crompton or equivalent model in makes mentioned in Appx 'B'.

Taking down ceiling fan of any size,dismantling blades remove to stores for keeping in safe custody for reuse complete all as specified and directed.

Hanging only ceiling fan of any size and connecting up including provision of three core PVC copper conductor cable of size 1.5 sq mm from ceiling rose to connecter block complete all as specified and directed.

M&L for painting using synthetic enamel paint in two coat over one coat of primer to ceiling fan in any make/sweep/model etc after cleaning washing with washable water with washing powder removing to old paint and fill up cavities using filler with marking including writing MES No as per existing complete as directed at site.

Taking down old Unserviceable PVC ecxhuast fan of any sweep and supply and new PVC exhaust fan of size 250mm sweep and connecting up including provision of three core PVC copper conductor cable of size1.5 sq mm from ceiling rose to connecter block complete all as specified and directed.

Supply & fix in repair capacitor of capacity 2.5 Mfd (PVC body) (Make:- EPCOS/JYOTI/ USHA or equivalent model in makes mentioned in Appx 'B'.

Supply & fix in repair capacitor of capacity 3.15 Mfd (PVC body) (Make:- EPCOS/JYOTI/USHA or equivalent model in makes mentioned in Appx 'B'.

Supply and fixing sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'C' curve, 240 volts complete all as specified. MAKE : - Indo Asian Cat Part No : 811955 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor cable 6 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. Note- Two run of 6.0 sqmm and one run of 4.0 sqmm cable with concealed conduct shall be measured as 1 unit. Cable Make: Poly Cab/Plaza/RR. PVC Conduit Make: BEC/ Poly india /Diplast or equivalent model in makes mentioned in Appx 'B'.

Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor cable 4 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia existing concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.50 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. Note- 2 run of 4.0 sqmm and 1 run of 2.50 sqmm cable with concealed conduct shall be measured as 1 unit. Cable Make: Poly Cab/Plaza/RR. PVC Conduit Make: BEC/ Poly india /Diplast or equivalent model in makes mentioned in Appx 'B'.

Taking down old unserviceable MCB DBs any type including MCB SP/SPN and removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls as per existing.

Supply and fixing sheet metal enclosures distribution board TPN, 4 ways, double door , 415 volts with 200 amps rated bus bar IP 42 protection, with shrouded neutral bar and insulated bus bar and earth link, suitable for MCCB 4 pole as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including taking down the existing DB ,MCCB abd MCBs any type making connections with suitable size of lugs and making good the disturbed surface matching with existing surface all as specified and directed. MAKE : - Indo Asian Cat Part No : 811893 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supply , insatallation, testing of SPN distibution board 12 way,double door , IP 43 , as per IS 8623 including 100 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles. MAKE : - Indo Asian Cat Part No : 811808 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supply , insatallation, testing of SPN distibution board 8 way,double door , IP 43 , as per IS 8623 including 100 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles. MAKE : - Indo Asian Cat Part No : 811807 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supply , insatallation, testing of SPN distibution board 6 way,double door , IP 43 , as per IS 8623 including 100 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles. MAKE : - Indo Asian Cat Part No : 811806 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supply , insatallation, testing of SPN distibution board 4 way,double door , IP 43 , as per IS 8623 including 100 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles. MAKE : - Indo Asian Cat Part No : 811805 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supply and fixing MCB four pole, 240 volts, 50Hz , breaking capacity 10KA, 100 Amps, 'B' Curve, all as specified and and as directed. Make- Legrand/Schnider/ABB or equivalent model in makes mentioned in Appx 'B'.

Supplying & fixing MCB double pole, with neutral 240 Volts 50 Hz, 63 Amps (`B’ series ) having current rating 10 KA complete all as specified and directed. MAKE : - Indo Asian Cat Part No : 811056 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supply and fixing MCB single pole and neutral , 240 volts, 50Hz , breaking capacity 10KA, 40 Amps, 'B' curve complete all as specified and directed. MAKE : - Indo Asian Cat Part No : 811016 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Supplying & fixing MCB SP, 6 to 32 Amps (`B’ Series ) having current rating 10 KA complete all as specified and directed. MAKE : - Indo Asian Cat Part No : 811008 to 811014 / Legrand / Schnider / ABB or equivalent model in makes mentioned in Appx 'B'.

Taking out old unserviceable earthing and material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and as directed by Engineer-in-charge. Note : The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Taking down old unserviceable geyser of cap 25 ltrs including all necessary electrical/water connection and re-fixing the after minor reapirs i.e. painting, cleaning externally and internally including repalcement of unserviceable PVC Connections, Heating element of wxisting make and cap, washers and safety valve complete all as specified and directed.

All as per item No 142 herein before but of cap 50 ltrs complete all as specified and directed.

Shiv Construction Co.

PARVEEN KUMAR

Gupta Enterprises