Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | ₹14.9 L Quoted ₹15.2 L | L1 | Accepted-AOC Contract awarded being the lowest |
| 2 | L2₹15.6 LRejected-AOC AMBADI NEAR PAACHAKKIL BUS STOP MALAPARAMBA POST KOZHIKODE DISTT KERALA 673 009 | KOZHIKODE | KOZHIKODE | KERALA | 673009 | ₹15.6 L | L2 | Rejected-AOC Rejected, not being the lowest |
| Sl No | Description | Qty | Unit | Gates Infra Construction Co L1 | EXCEL ENGINEERING L2 |
|---|---|---|---|---|---|
| 1.00 | Material & labour for Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. Note:Ceiling boards will be measured and paid separtely. | 170 | Sqm | 650 ₹1.1 L | 600 ₹1.0 L |
| 2.00 | Supply & fix 5mm thick plain embossed PVC false ceiling boards of size 600mmx600mm of density 600kg/cum, plain colour decorative type fixed to Aluminium grid frame work complete all as specified and as directed. Make : SMP MAGMA or equivalent. | 170 | Sqm | 1,600 ₹2.7 L | 2,000 ₹3.4 L |
| 3.00 | Dismantling boarding, any description, fixed in any position with screws all as specified and as directed. | 28 | Sqm | 40 ₹1,120 | 45 ₹1,260 |
| 4.00 | Material & labour for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. | 250 | Kg | 750 ₹1.9 L | 800 ₹2 L |
| 5.00 | Material & labour for Aluminium composite panel 4mm thick of approved colour and shade fixed with self tapping screws on aluminium frame work in suitable shape and size complete all as specified and as directed. | 28 | Sqm | 2,800 ₹78,400 | 2,800 ₹78,400 |
| 6.00 | Supply & fix 19mm thick BWP grade Marine plywood (710 grade) having specific gravity more than 0.8, screw holding capacity more than 130Kg and water absorption less than 5% with two tier preservative treatment (Glue line protection and finished panels treated with ACC (Acid Copperchrome compound) as in cupboards/shutters/rifle rack etc fix to 1st class hard wood frames (Teak wood) including necessary cutting for rifle rack complete all as specified and as directed and as per manufacturer's instructions all as specified and as directed. Make: Bond 710 by Century Ply/Greenply Note : Necessary fittings will be measured and paid seperately under relevant items. | 18 | Sqm | 2,500 ₹45,000 | 2,500 ₹45,000 |
| 7.00 | Material & labour for Plain, solid, straight wooden frame work for cupboards as mentioned in item No 06 here in before, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with wooden plugs all as specified and as directed. | 0.14 | Cum | 1,20,000 ₹16,800 | 60,000 ₹8,400 |
| 8.00 | Preparation of new wooden surfaces of any description, over 10cm in width or girth and two coats of synthetic varnish all as specified and as directed. | 5.5 | Sqm | 80 ₹440 | 100 ₹550 |
| 9.00 | Supply & fix stainless steel soft closing hydraullic hinges for shutter complete as specified and as directed. | 8 | Each | 250 ₹2,000 | 325 ₹2,600 |
| 10.00 | Supply & fix for cupboards locks all as specified and as directed. | 1 | Each | 450 ₹450 | 400 ₹400 |
Updated dates
Tender Value
₹17.1 L
EMD Value
₹34,200
Closing Date
10 Apr 2026, 12:30 pmClosed
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2026_MES_749544_2
GE MAINT EZHIMALA 8782
Open Tender
Civil Works
120 days
Ezhimala
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹34,200
27 Apr 2026
12 Mar 2026
16 Apr 2026
12 Mar 2026
10 Apr 2026
27 Mar 2026
12 Mar 2026 - 19 Mar 2026
Material & labour for Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. Note:Ceiling boards will be measured and paid separtely.
Supply & fix 5mm thick plain embossed PVC false ceiling boards of size 600mmx600mm of density 600kg/cum, plain colour decorative type fixed to Aluminium grid frame work complete all as specified and as directed. Make : SMP MAGMA or equivalent.
Dismantling boarding, any description, fixed in any position with screws all as specified and as directed.
Material & labour for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.
Material & labour for Aluminium composite panel 4mm thick of approved colour and shade fixed with self tapping screws on aluminium frame work in suitable shape and size complete all as specified and as directed.
Supply & fix 19mm thick BWP grade Marine plywood (710 grade) having specific gravity more than 0.8, screw holding capacity more than 130Kg and water absorption less than 5% with two tier preservative treatment (Glue line protection and finished panels treated with ACC (Acid Copperchrome compound) as in cupboards/shutters/rifle rack etc fix to 1st class hard wood frames (Teak wood) including necessary cutting for rifle rack complete all as specified and as directed and as per manufacturer's instructions all as specified and as directed. Make: Bond 710 by Century Ply/Greenply Note : Necessary fittings will be measured and paid seperately under relevant items.
Material & labour for Plain, solid, straight wooden frame work for cupboards as mentioned in item No 06 here in before, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with wooden plugs all as specified and as directed.
Preparation of new wooden surfaces of any description, over 10cm in width or girth and two coats of synthetic varnish all as specified and as directed.
Supply & fix stainless steel soft closing hydraullic hinges for shutter complete as specified and as directed.
Supply & fix for cupboards locks all as specified and as directed.
Supply & fix for 125mm stainless steel handles, cast type, polished for cupboard shutters, etc complete all as specified and as directed.
Material & labour for 1.00mm thick glossy finish Acrylic laminate of surface finish, colour and pattern as approved, fixed with approved adhesive for fixing over BWP plywood (710gde) /polymer profile foard board (Multiwood) as per manufacturer's instructions complete all as specified and as directed.
Material & labour for Wooden table of First class Hard wood with size of 2.20M x 1.00Mx20mm including cutting for & necessary cable manger with four legs & skelton as per design including polishing complete all as specified and as directed.
Supply & fix Wish T Module-Shared side by side 2 Person L shaped Works Station 5'x4'Wx2'D SCHM-2 with additional kb tray per person and Pedestal per person as per the following specifications:- Providing and placing 52.4mm thick 1200mm high panels in wish system with combination of metal raceway at bottom, two intermediate fabric blocks, top tile-fabric tackable, white board, Fabric, Magnetic, providing powder coated legs all as specified and as directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for,all as specified and as directed.
Material & labour for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring all as specified and as directed.
Dismantling for plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.
Supply & fix 2mm thick polycarbonate sheet crystal type and any colour fixed with coach screw and washer in roof/wall etc and jointing with suitable strip as per manufacturer's instructions complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches ceiling roses, pendent, regulators, sockets, MCB/ MCCB/ MCB DB/ earth plug and socket etc and making good matching to the existing colour to the disturbed surface all as specified and as directed.
One Light/ fan/bell point controlled by one switch
One 3 pin socket outlet outlet 5 Amps on the same board with other switches
5 Amps socket point on independent board
All as per srl item no 20 here in before but 2.5 sqmm for 5/15 Amps socket on independent board all as specified and as directed
Supply & fix in repairs ceiling rose 3 phase/PVC/polycarbonate isolated body all as specified and as directed.
Supply & fix in repairs modular switch one way 6 Amps 1 module all as specified and as directed.
Supply & fix in repairs modular socket 6 Amps 2/3 pin 2 module all as specified and as directed.
Supply & fix in repairs modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose all as specified and as directed.
Supply & fix in repairs modular switch one way 16 Amps 1 way 1 module all as specified and as directed.
Supply & fix in repairs modular bell puslh 6 Amps 1 way 1 module all as specified and as directed.
Supply & fix in repairs Bell /buzzer ding dong AC 230 Volts single pole all as specified and as directed.
Supply & fix in repairs Fan step regulator, 120W - 2 module AC 230 Volts all as specified and as directed.
Supply & fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10 Amps complete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and as directed.
Material & labour sub main wiring using 2 runs of 4.0 Sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed/open conduit along with 1 run of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified including taking down the unserviceable wiring all as specified and as directed Note : One run of PVC conduit, 2 runs of 4.0 sqmm PVC insulated copper conductor and 1 run of 4.0 sqmm PVC insulated copper conductor cable will be measured as one unit.
Supply & fix TPN 6 way MCB DB double door 415 volts complete all as specified and as directed.
Supply & fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB32 Amps complete all as specified and as directed.
Supply & fix TPN 40 Amps MCB complete all as specified and as directed.
Supply & fix in repairs MCB SP 6-32 A in DB all as specified and as directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. complete all as specifed and as directed.
Supply and fixing wall mounted fan 450 mm sweep complete all as specified and as directed.
Material and labour for Earthing with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, washers of GI or steel all as shown in elect plate No 3 of SSR Pt I and connected earth test point all as specified and indicated incl testing etc complete, incl taking down existing earthing all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specififed and as directed.
Taking down carefully old ceiling fan any sweep and size from the existing location and fixing that on same location after cleaning including greassing the bearing of fan to make well functional after rectify the all minor defects complete all as specifed and as directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.99 MB
Tender.pdf
Tender Documents • 0.67 MB
BOQ_846825.xls
BOQ • 0.52 MB
Download all tender documents and submit your bid