Construction of machine drilled deep bore well and supply installation testing and Commissioning submersible pumping equipment along with required accessories near the orchard of Bashir Ahmad Bhat (Bashir Assad) at Dadoo Marhama Anantnag.

Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125 mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up-to-date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labour and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till the well is thoroughly developed in all respects as per the directions of site engineer.

Supplying, assembling, lowering and fixing in vertical position in bore well ERW Fe 410 mild steel screwed or socketed/plain ended 125 mm nominal dia (MS 125 mm) casing pipe conforming to IS: 4270:2001 with up-to-date amendments of reputed and approved make, including painting of outside brand and manufacture, including required transportation hire and labour charges, fitting/welding and accessories, all complete for all depths as per direction of engineer-in-charge. The casing pipe is to be slotted as per site requirement and as directed by site engineer.

Providing, fitting and commissioning of single phase submersible type pumping unit along with allied jobs. Complete details of the job are as under: P/F/T and commissioning of single phase pumping equipment following specifications. Power: Not less than 02 H.P.Discharge: 800–600 GPH Head: 70–90 metres Make: Reputed. The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment and P/F starter.

Providing and fitting of 32 mm dia GI (B-class) column pipe. The pipe is properly threaded at both ends and the length of each pipe is 3 m. The pipe is provided and fitted with GI sockets for jointing purpose.

Providing and fitting of 05 KVA single phase automatic voltage stabilizer (dry type). The job also includes P/F of copper wire of suitable gauge required for connecting incoming and outgoing connections.

Providing and fitting of submersible cable of 4 sq. mm for connecting pumping unit.

Providing and fitting of 32 mm dia MS holding clamps fabricated out of 10 mm thick MS plate with nuts and bolts.

Providing and fitting of reducer 32 mm to 25 mm dia. The job also includes P/F of 32 mm dia GI bend. MOC: B-class, including well cap of suitable size.

Providing and fitting of 05 mm steel wire rope for holding submersible pumping unit.

Providing/laying of plain cement concrete block of size 4 ft × 4 ft × 1 ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes providing/laying of PCC edges of 4" × 4" in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centering, curing, etc. is included in the scope of work. In case suitable space for the above specification is not available, the surface area is to be adjusted accordingly.