SPECIAL REPAIRS TO BLDG NO PM-15, PM-41, PM-42 AND PB-138 AT AFS BIDAR

Amount

B/R PORTION : Taking down chowkats or frames exc 1.5 sqm and n.exc 4.0 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for sub base for floor tiles, roof /chajja padding including removal of debris outside MD land complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removal of debris out of premises complete all as specified and as directed.

Demolition of brickwork or stone/ PCC block masonary, built in cement mortar or cement lime mortar complete all as specified and as directed.

Demolition of Reinforced Cement Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work at any height, complete all as specified and as directed.

Dismantling of structural steel work including iron railing, window grill, doors, gates but excluding framed truss etc., complete all as specified and as directed.

Dismantling of aluminium partition work including taking down shutters from frame, complete all as specified and as directed.

Material and labour 25 mm thick plain cement concrete Type B-0, 1:2:4 (12.5 mm graded aggregate) as in sub base for floor tiles, complete all as specified and as directed.

Material and labour for 35 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Material and Labour for Second class hardwood glazed and skelton shutters 35mm thick, as in doors, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(a) and fitted to chowkats, complete all as specified and as directed.

Material and labour factory made UPVC white colour openable window /ventilator multi chamfered and stiffened / reinforced framed windows using 115mm x 58mm x 2.3mm (± 0.2mm) size section around as main frames with necessary mullions sections(if required) of sizes 76mm x 115mm and glass shutters made with the profile section of size 75mm x 62mm, including the cost and fixing of 5mm thick clear float glass and SS Mesh for fixing glass and mess shutter size 75mm x 40mm with necessary beading the corners of all profiles of frames and shutters shall be homogenously fusion heat welded without any gaps. EPDM gaskets of required sizes and shapes are inserted based on the glass for Air & Water tightness. The shutters shall have necessary handles made of zinc alloyed (white powder coated) locking arrangments and other shutter shall be reinforced with Gl profiles of window unit to the existing masonry wall with instructions, complete all as specified and as directed.

Supply and Fixing Anodised aluminium frame powder coating (minimum thickness of powder coating not less than 15 micron), side hung/sliding type for doors, windows, ventilators, partitions with one or more rebates including jointing cleat for fixing etc., complete all as specified and as directed.

Material and Labour for tinted glass 10 mm thick of any colors and glazing with oil putty or glazing clips etc in square or rectangular fixed with silicon or adhesives as in shelves, wardrobes, cupboards, complete all as specified and as directed.

Material and Labour for tinted glass 4 mm thick of any colors and glazing with oil putty or glazing clips etc in square or rectangular fixed with aluminium window/ ventilator shutters complete all as specified and as directed.

Material and Labour for glass 5 mm thick for full length looking mirror and notice boards, of any colors and glazing with oil putty or glazing clips etc in square or rectangular fixed with wall frame etc, complete all as specified and as directed.

Supply and Fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/beeds to Aluminium or Steel frame,complete all as specified and as directed.

Material & Labour for Vitrified Ceramic Light Shade tiles 7-8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set with spacer, joints of more than 3mm are grouted with epoxy grout including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & Labour for Vitrified Ceramic Light Shade tiles 7-8mm thick (square/ rectangular) polished, in verticle surfaces such as skirting, dado etc. set with spacer, joints of more than 3mm are grouted with epoxy grout including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Material and labour anti skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set with spacer, joints of more than 3mm are grouted with epoxy grout and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Material and labour anti skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fixing of Glazed ceramic coloured tiles in vertical surface 450x300x7mm / 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including matching PVC corner beading over and 10mm thick rendering in CM 1:4 etc complete all as specified and directed.

Supply & Fixing of 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including edge moulding, machine polish to edge as required and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm both side prelam of any colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed.

Supply and fixing of Factory made solid panel PVC door both side prelam shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam of any colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

Supply and fix Pressed steel frames for doors of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

Supply and fix Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-0 (12.50 mm graded aggregate) for filling back of chowkhats etc complete all as specified and as directed.

Material and Labour for 18/19mm thick Plywood, grade BWP type BB fixed with screws to timber frame complete all as specified and as directed.

Supply and fixing for 1mm thick laminated mica glossy finishes in any colour, fixed with adhesive material for shutters of ward robes, cabinets, wall panneling etc complete all as specified and as directed.

Supply and Fixing for steel slip-on soft closing concealed hinges with nickel plated for high corrosion resistance of dimensions 110x60x30mm and weight 150 gm for kitchen cabinet, ward robes etc complete all as specified and as directed. Make: Godrej Product or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing for steel with nylon ball bearing soft close wardrobe sliding double track door roller, top track and bottom track (Two door sets) with running gear for concealed fixing for two wardrope sliding doors, wooden sliding doors, glass sliders etc. top & bottom track groove mount of capacity 50 Kgs for complete all as specified and as directed.

Supply and Fixing for Alloy steel of any colour concealed sliding handle of length 160mm and weight not less than 75 gm for all type wardrobe & cupboard door and drawer etc complete all as specified and as direcied.

Supply and Fixing for CP mortise door handle lock of 200mm long with lock body and 3 keys for door matte black rose finish complete all as specified and as directed. Make: Godrej Product or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing stainless steel floor door stopper finished with brass antique of 125 mm over all length with cover plate and tongue with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixed in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate including fixing with necessary fittings in doors, complete all as specified and as directed.

Supply and fix aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and Fixing of magnetic catcher 40mm long fix with screws as in cabinets, wardrobes and cupboard etc complete all as specified and as directed.

Supply and Fixing of Soap dispenser with pump action complete all as specified and as directed. Make: Parryware CAT No. T6513A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs brass chromium plated shower rose 150mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed. Make: Parryware CAT No. T5135A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing of 5mm thick glass corner glass self of 300mm radius with CP brass railing fixed with brass Brackets complete all as specified and directed. Make: Parryware CAT No. T6010A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500cm long and 125cm wide with chromium plated bracket guard and railing completeall as specified and as directed. Make: Parryware CAT No. T6009A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fixing of Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified and as directed.

Supply and fixing of Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Supply and fixing of Aluminum anodised bow handle fabricated type extruded section of 150mm longcomplete all as specified and as directed.

Supply and Fixing for 125mm long stainless steel door handle finished with brass antique fix with brass screws complete all as specified and as directed.

Supply and fixing of 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supply and fix in repairs stainless steel 25mm dia Curtain rods with supports etc, complete all as specified and as directed.

Supply and fix in repairs 25mm dia cromium plated fancy type decorated approved design brackets with end sockets to hold the curtain rod properly complete all as specified and as directed.

Supply and fix in repairs brass peg set of six with screws complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, rectangular/square pipes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 on brick work, ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

Taking down steel tubing 15mm bore and connections, including cleaning for refixing complete all as specified and as directed.

Supply and fixing ofGI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 15mm dia bore complete all as specified and as directed.

Taking down steel tubing 20mm bore and connections, including cleaning for refixing complete all as specified and as directed.

Supply and fixing ofGI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 20mm dia bore complete all as specified and as directed.

Taking down steel tubing 25mm bore and connections, including cleaning for refixing complete all as specified and as directed.

Supply and fixing in GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 25mm dia bore complete all as specified and as directed.

Supply and fix in repairs Wash basin oval shape counter top of size 555x450x205mm in any coloured including 32mm bore CP Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. Make : Parryware CAT No C0407 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs Vitreous China Wash Hand Basins, size 530 X 410 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. Make : Parryware CAT No C041C or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in reapirs vitreous china urinal, half stall type with and including waste coupling CP of 40 mm dia PVC flexible waste pipe including all acessories, complete all as specified and as directed.

Supply and fiixing of chromium plated Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and as directed.

Supply & Fixing in PVC waste pipe 32mm bore for WHB/Sink/Urinal, complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe, complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe, complete all as specified and as directed. Make: Parryware CAT No. C0126CS or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc, complete all as specified and as directed. Make: Parryware CAT No. E8333 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Parryware CAT No. G0204A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs 15mm bore stop valves/angle cock, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: Parryware CAT No. G0253A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs 15mm bore CP 2- Way bib cock double handle with wall flangess, glossy finish complete all as specified and as directed. Make : Parryware CAT No G021ZA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing of 15mm bore Brass CP mixer(3 in 1) with wall flange ( provision for over head shower and hand shower) for mixing hot & Cold water screwed down for iron pipe complete all as specified and as directed. Make : Parryware CAT No G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing of 15mm bore ABS hand shower Multiflow 100mm with 1.5M SS tube & ABS Hook complete all as specified and as directed. Make : Parryware CAT No G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix in repairs 15mm bore chromium plated cast copper alloywall mounted sink cock screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Parryware CAT No. G4721A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs Tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed. Make: Parryware CAT No. T5901A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs Brass Towel ring Complete all as specified and directed. Make: Parryware CAT No. T5902A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs SS grating 100mm dia complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs Toilet paper Holder with Cover of chromium plated complete all as specified and as directed. Make: Parryware CAT No. T5914A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and fix in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc,fixed in repair, complete all as specified and as directed.

Supply and fix in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc, complete all as specified and as directed.

Supply and fix in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends 110mm dia any radius with access door, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door, complete all as specified and as directed.

Supply and fixing in reparis PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door, complete all as specified and as directed.

Material and Labour Rendering 15mm thick on external brick work or concrete surface in CM 1:4, complete all as specified and as directed.

Material and labour for Preparation of New plastered surface of wall and applying two coats of oil bound distemper over one coat of priming paint, complete all as specified and as directed.

Material and labour for Complete removal of existing treatment and preparation of surface, applying primer coat on old surface of walls and applying two coats of distemper oil bound, complete all as specified and as directed.

Material & Labour for Applying 2mm thick wall care putty on wall or ceiling at any height etc, complete all as specified and as directed.

Material and Labour for Complete removal of existing treatment on Wall or newly plastered surface, Chajja, Roof Projection and Roof Fascia surface and Finishing surface with Acrylic mooth exterior paint of required shade by mechanical sprayer(Two or more coat applied @ 1.67 ltr/10 sqm over and including Two or more coat priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed.

Material and labour for Complete removal of existing treatment of ceilings and applying two coats of oil bound distemper over one coat of alkali resistant priming paint, complete all as specified and as directed.

Material and labour for Preparation of new plastered surface on ceiling in height and any description and applying two coat of oil bound distemper over a alkali resistant priming coat, complete all as specified and as directed.

Material & Labour for Preparation of New Plastered Surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

Material and labour for Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Material & Labour Plain cement concrete 75mm thick Type C2 1:3:6 (40 mm graded aggregate) in Plinth Protection complete all as specified and as directed.

Supply and fixing of Anodized aluminium False Ceiling frame work with 605mm x 605mm size snap grid fixed with screws /staples at any height, complete all as specified and directed.

Supply and fixing of 12mm thick, Mineral fibre board/tiles of any size, fixed in ceiling at any height, flat or sloping,complete all as specified and as directed.

Material and labour for 12mm thick Plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh, box or any pattern (Fillets, metal frame work and G.I. wire mesh paid separately), complete all as specified and as directed.

Supply and fixing Gl frame work for Seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal changes of 20 and 30mm web of 27mm fixed surrounding wall using nylon sleeves and web of 45mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers 6 mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long, box or any pattern complete all as specified and as directed.

Supply and fixing wall mounted cloth drying hanger of 4 feet length MS powder coated with 04 Nos of drying rod complete all as specified and as directed.

Supply and fixing PVC coated anti rust steel wire rope (5mm dia) with bracket for drying cloth in verandah, complete all as specified and as directed.

Supply and fix Retractable clotheslines, wall mounted ABS case with adjustable stainless steel rope string heavy duty for hanging of mosquito net, complete all as specified and as directed.

Material and labour for hard core of broken stone broken to gauge not exc 63 mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

Material & Labour for Machine pressed precast concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with gray cement and pigment etc, complete all as specified and as directed.

Material and labour 75mm thick for cement concrete type D-2, 1:4:8 20 mm graded aggregate as in sub base of floor and path, complete all as specified and as directed.

Material and labour for sand or stone dust filling and sand or stone dust cushioning under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for pre cast cement concrete block masonry with solid blocks of type C0 1:3:6 (12.50mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Supply and fixing in repairs MS Roof trusses (framed), Vertical post, trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Square or Rectangular hollow sections) including distance pieces, cleats, screw bolt with washers and one hexagonal or square nuts etc. conforming to Fe-290 Gde-165 complete all as specified and as directed.

Supply and fixing in repairs of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing conforming to Fe-290 (Gde E 165), complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling of Asbestos cement sheets in roof coverings complete all as specified and as directed.

Supply and fix in repairs of Pre Painted Galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Supply and fix in repairs of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strngth of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Material and labour, two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation, of any description, n exc 10 cm width or girth complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr in deep for sewage lines/manholes etc.n.exc 10 sqm on plan and getting out in hard/dense soil, complete all as specified and as directed.

Returning filling including spreading watering and well ramming in layers n.exc 25cm thick in hard/dense soil complete all as specified and directed

Removing excavated soil to a distance n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for cover slabs and similar work complete all as specified and as directed.

Material and labour for PCC 100mm thick 1:2:4 type B1 (20mm graded aggregate) and complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded agregate as in benching, edging, chamfering, etc complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks/coping etc including necessary form work etc, complete all as specified and directed.

Material and labour for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slab set in CM 1:6 including necessary form work.

Material and labour for rendering 15mm thick on fair faces of brick work/concrete surfaces in cement mortar 1:4 mixed with approved water proing compound finished even and smooth with out using extra cement. Note :- Supply only of water proing compound shall be measured and paid separately, complete all as specified and as directed.

Use and waste of formwork (flat concreted sufracte) to soffits of suspended slabs as in in roof slab, landing, deck slab and similar work not exceeding 20mm thick complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B-0 using 12,5mm graded stone aggregate, as in shelves, chajjas, water troughs, shelves and similar articles etc, complete all as specified and directed. Note: Reinforcrment steel will be measured and paid seperately.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for handle, rungs and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs, complete all as specified and as directed.

Demolition and breaking up 150mm dia SWG drain pipe set in cement mortar complete all as specified and as directed.

Material and labour for Salt glazed stoneware pipes of 150mm dia (internal diameter) grade 'A' laid in trenches and jointed and tested complete all as specified and as directed.

Providing cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid & tested complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete type B1, 1:2:4, smooth finished, and reforming benching as required for 150 mm internal dia complete all as specified and as directed.

Taking down/Removing of existing water proofing felt on roof surfaces and wall surfaces complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls, cement concrete floor etc., including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for roof /chajja padding including removal of debris outside MD land complete all as specified and as directed.

Material & Labour for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in Padding over roof / chajja complete all as specified and as directed.

Material & Labour for Rendering 5mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and smooth surface without using extra cement complete all as specified and as directed.

Material & Labour for Rendering 10 mm thick plaster on wall surfaces in CM (1:6) finishing the surface even and smooth without using extra cement all as specified and directed .

Material & Labour for Rendering 15mm thick on brick work or concrete surface in CM 1:4 including WPC (WPC measured and paid seprately) complete all as specified and as directed.

Supply only Liquid water proing compound complete all as specified and as directed.

Material & Labour for Water proing treatment on horizontal or vertical surfaces with Applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing 4.0 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gm /sqm and applying a coat of blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm and finished with solar reflective bituminous aluminium paint @ 100 grams/sqm complete all as specified and as directed.

Material & Labour for cutting grooves in brick work wall, 75mm wide and 65mm deep and shaping garizental face of groove with cement mortar 1:3 complete all as specified and as directed.

Material & Labour for plastering 10mm thick CM 1:4 with WPC on sunken floors, roof slabs, Water Retaining Structures concrete surfaces complete all as specified and as directed.( WPC Should be measured and paid separately) etc complete all as specified and as directed.

Material & Labour Water proofing treatment to sunken floors, roof slabs, Water Retaining Structures etc., using Shalicem EWP of make STP limited having two component (Packing 50 kg of powder 34 kg and liquid 16 kg) cementitious elastomeric water proof coating in two layers @ 2.5 kg per Sqm in each layer to achive 1.5mm thickness including preparation of sunken portion slab surfaces by removing all loose particles and sharp projection etc, complete all as specified and as directed.

Supply and fixing of Rotational moulded polyethene Water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank, including 20mm Ball Valves, 20mm Tank nipple two nos connecting with inlet and outlet, 20mm bore Gun-metal, globe or gate valves, with iron wheel head, complete all as specified and as directed.

Material & Labour for disconnecting existing tanks exc 500 & n.exc 1000 ltr of capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

Supply and fix in repairs Stainless steel sink made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 30'' L x 18'' W x 8'' D including 32mm bore SS Waste coupling and waste pipe fixing on kitchen platform with suitable arrangements in cement mortar on to dwarf wall or fixing cantilever brackets, including dismantling existing sink, complete all as specified and as directed. Make : Parryware CAT No C856499 or Techno commercial equivalent of approved makes specified here-in-after.

E/M PORTION : Taking down carefully existing copper/aluminium point wiring (light/fan/sockets points ) complete with all accessories such as switch with sheet, ceiling rose including rusted/broken concealed sunken boxes etc but except concealed conduit and junction boxes and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface complete all as specified and as directed.

Taking out unservicable MCB DB any size complete by disconnecting complete all as specified and as directed.

Taking out unservicable MCB,SPN, SP,TPN of any Amps complete by disconnecting complete all as specified and as directed.

Taking out unserviceable fans of any size and refixing after doing necessary repairs complete all as specified and as directed.

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated usheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through existing PVC conduit but including 2mm thick galvanised steel pressed sunken box suitable modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket / regulator etc including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc complete all as specified and as directed. Note : Switches / socket / regulator shall be measured and paid separately under appropriate item of BOQ. :-

One light point controlled by one one way 5 Amp switch complete all as specified and as directed.

One Ceiling Fan /Exhaust point /Wall mounted controlled by one 5 Amp switch all as specified and as directed.

One 3 pin socket out let 05 Amps on same board complete all as specified and as directed.

One 5 pin socket out let 05 Amps on independent board complete all as specified and as directed.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size

All as per item No 154 here-in-before, but using 1.5 sqmm, copper conductor with 1.5 sqmm, PVC insulated light point controlled controlled by 2 way switches complete all as specified and directed.

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated usheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through existing PVC conduit but including 2mm thick galvanised steel pressed sunken box suitable modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket / regulator etc including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc complete all as specified and as directed. Note : Switches / socket / regulator shall be measured and paid separately under appropriate item of BOQ.

S & F modular switch 1 way 6 amps, 1 module complete all as specified and as directed.

S & F modular switch 2 way 6 amps, 1 module complete all as specified and as directed.

S & F modular switch 1 way 16 amps, 1 module complete all as specified and as directed.

S & F modular sockets 6 amps, 2/3 pin combined two module complete all as specified and as directed.

S & F modular sockets 6/16 amps, 2/3 pin combined two module complete all as specified and as directed.

S&F Bell push 5 Amps complete all as specified and as directed.

S&F Bell AC 230 volts, single pole complete all as specified and as directed.

M & L Ceiling rose 3 terminals/phase type, fabricated of PVC/Polycarbonate, isolated body complete complete all as specified and as directed.

Supply and fixing modular white cover suitable with frame 3 module complete all as specified and as directed.

Supply and fixing modular white cover suitable with frame 12 module complete all as specified and as directed.

Supply and fixing modular white cover suitable with frame 18 module complete all as specified and as directed.

Supply and fix modular metal flush box with 3 module complete all as specified and as directed.

Supply and fix modular metal flush box with 12 module complete all as specified and as directed.

Supply and fix modular metal flush box with 18 module complete all as specified and as directed.

S & F stepped type modular electronic fan regulator complete all as specified and as directed.

Material and labour for sub main wiring, complete with 4 runs of 10 sqmm, single core, PVC insulated, unsheathed FRLS cable,1100 volts grade,multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories concealed in surface/wall/ roof etc. with one run of PVC insulated 6 sqmm FRLS cable, copper conductor for earth continuity conductor complete all as specified and as directed. Note : 4 runs 6 sqmm single core copper conductor, one run of 6 sqmm copper conductor earth wire and PVC conduit and its accessories will be measured as one unit.

Material and labour for sub main wiring, complete with 2 runs of 6 sqmm, single core, PVC insulated, unsheathed FRLS cable,1100 volts grade,multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories concealed in surface/wall/ roof etc. with one run of PVC insulated 6 sqmm FRLS cable, copper conductor for earth continuity conductor complete all as specified and as directed. Note : 2 runs 6 sqmm single core copper conductor, one run of 6 sqmm copper conductor earth wire and PVC conduit and its accessories will be measured as one unit.

Material and labour for Sub main wiring of any type and size wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 2.5 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 2.5 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed. Note :- 03 run of 2.5 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

Material and labour for sub main wiring, complete with 2 runs of 4 sqmm, single core, PVC insulated, unsheathed FRLS cable,1100 volts grade,multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories concealed in surface/wall/ roof etc. with one run of PVC insulated 4 sqmm FRLS cable, copper conductor for earth continuity conductor complete all as specified and as directed. Note : 2 runs 4 sqmm single core copper conductor, one run of 4 sqmm copper conductor earth wire and PVC conduit and its accessories will be measured as one unit.

M&L for LED Batten 20W with LED tube light integrated LED channel of capacity 20 Watt white colour complete all as specified and as directed. Make: Bajaj or equvalent of Havells / Crompton Greaves / Philips / Wipro / Syska / Polycab .

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with Silica filled driver for wet protection along with SPD Protection, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completewatts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting in flexible conduit and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape fitted with clamp complete incl removal of old unsv fitting complete all as specified and as directed. Make: Havells, Crompton and Bajaj

M&L for street light bracket made out of 32 mm dia GI tubing medium grade upto 1.5 mtr long including bending, welding ,drilling holes as required and fixing with flat iron clamps 32x 6 mm thick (02 Nos) with suitable nut, bolts and washers to steel tubular /concrete poles/wall complete all as specified and as directed.

S&F LED light fitting recess/surface mounting mounted 2'x2' size flat panel of capacity 36/40 Watt made of CRCA sheet steel housing duly powder coated with high efficient PMMA diffuser soft glare free light complete with drivers, holder, LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 50 watts with pre wired and necessary mounting arrangement with lumen efficiency >= 110 LPW incl SPD 10KV and provision of 2.5 sq mm three core flexable aluminium conductor cable multi stranded ,connected to existing points in Hanger beam angle of any description complete all as specified and as directed. Make : Havells catpart No. JETAADORFLS50WLED or equivalent make of Crompton/Bajaj.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as directed by Engineer-in-Charge. Make:Havells or equivalent in Crompton and Bajaj.

S & F IP 65 Rated LED Bollard light 8W/10W , provision of new 3 core multistranded copper conductor of size 23/0.193 from control DB to fitting including suitable LED Driver complete all as specified and as directed. Model- BAMBOOBLS8WLED830PSYMTOPC, Make:Havells or equivalent in Crompton and Bajaj.

M&L for LED Batten with LED tube light integrated LED channel of capacity 10 Watt white colour complete all as specified and as directed. Make: Bajaj BCLSB 10WH or equvalent of Havells / Crompton Greaves / Philips / Wipro / Syska / Polycab .

Supply and fixing ceiling fan (BLDC) complete with accessories 230V SP 1200 mm sweep complete all as specified and as directed. Make : Havell Cat Part No ES-50 Premium 5 star rating and equivalent in Bajaj/Usha/Orient.

S&F Wall mounted fan hi-speed 400 mm sweep (White color) single phase 230 volt, 50Hz, smooth oscillation & running, high speed motor for higher air delivery superior low voltage performance, aerodynamically designed balanced heavy duty PP blade complete all as specified and as directed.

Supply and fixing Exhaust Fan AC single phase 230/240 volts of size 450mm sweep with louvre complete all as specified and as directed. Make : Havells and equivalent in Bajaj/Usha/Orient

Supply and fixing Exhaust Fan AC single phase 230/240 volts of size 300mm sweep with louvre complete all as specified and as directed. Make : Havells and equivalent in Bajaj/Usha/Orient

Supply and fixing of vertical type VTPN DB MCCB up to 250 Amps 8 ways, Double door type complete all as specified and as directed.

S & F MCB DB TPN 4 way with 200A rated copper busbar with mild sheet enclosure vertical double door type suitable for fixing MCBs including connecting etc complete all as specified and as directed.

S&F MCB DB, SPN, 8 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc complete all as specified and as directed.

Supply and fixing MCCB TPN ( 4 pole) 200 Amps 415 Volts of braking capacity 36 KA complete all as specified and as directed.

Supply and fixing MCCB TPN ( 4 pole) 100 Amps 415 Volts of braking capacity 16 KA complete all as specified and as directed.

Supply and fixing MCCB TPN ( 4 pole) 125 Amps 415 Volts of braking capacity 25 KA complete all as specified and as directed.

Supply and fix MCB SPN 32 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

Supply and fix in replacement MCB SP 5 to 32 amp complete all as specified and as directed.

S&F Electric Chimney Black wall mounted 1350 CMH auto clean suitable for 4-5 burners, instant auto clean with heat/water on button, shine finish, curved glass stail less steel body, touch control,speed level 3 having LED light 02 Nos, of single phase AC 220 Volt, 50 Hz of size not less than 88 cmx 48.6 cmx 51.5 cm (L x D xH) and provide demonstrate the functionality and safety measures complete all as specified and as directed. Note: provide 2 years Warranty on product and 3 years on motor and PCB panels

Supply and Fix single pole and neutral enclosing with a two pin and earth plug socket complete with one single pole MCB 20 A ,240 V complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground earth pit not less than 2.25 m deep below normal ground level with the top edge of earth plate at a depth of not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made out of GI and GI earth wire protected by 15 mm bore light grade GI pipe as well as 20 mm dia medium grade pipe 1.5 mtr fixed with funnel and wire mesh as specified and connected all as shown in electrical plate No 3 of SSR Part I including necessary earth work and excavation in any type of soil and PCC 1 : 2 : 4 type B - 1 in chamber and 40 mm thick RCC 1 : 2 : 4 type B - 1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways with 6 mm dia M S hooks complete all as specified and as directed. Note : The GI Wire 4 mm dia &15 mm bore light grade GI pipe upto 7.5 M deemed to be included in the rate quoted by the contractor. Beyond 7.5mm GI wire 4mm dia and GI tubing light grade 15mm dia shall be measured and paid under the respective item of schedule

Supply and fix earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Supply and laid in trenches Galvanised Iron pipe 15 mm dia light grade with all required necessary fittings laid in trenches complete in protection of earth wire complete all as specified and as directed.

S&F Submersible Fountain lights R/G/B type complete with fixing arrangements with nuts and Bolt complete all as specified and as directed. Make: Havells, Crompton and Bajaj

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil for laying of cable trenches complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed.

Removing of surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Supplying and laying reinforced pre cast concrete cable cover class LV type 1 plat size 250x150x40 mm laid in trenches as protection to cables complete all as specified and as directed.

M&L for providing sand cushioning for protection of UG cable (8 cm deep before laying & 15 cm above the top edge of cable after laying) in trenches with dry (coarse) sand approved quality including filling, spreading and punning down to desired thickness complete all as specified and as directed.

Supply and laid in trenches Galvanised Iron pipe 50 mm dia light grade with all required necessary fittings laid in trenches complete as protection of LT cables at road crossing complete all as specified and as directed.

Supply and laid in trenches Galvanised Iron pipe 40 mm dia light grade with all required necessary fittings laid in trenches complete in protection of LT cables at road crossing complete all as specified and as directed.

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed.

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed.

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed.

Taking up or down CI 80 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Taking up or down CI 50 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Taking up or down CI 25/32 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 100mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-7 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches complete all as specified and as directed. Make : Electrosteel casting ltd or equivalant Make of Tata/Electrotherm/Jindal. Note : (i) Excavation and DI Specials shall be measured and paid separately . (ii) Rate of rubber gasket is deemed to be included in unit quoted rate.

Supply and laying 50 mm bore galvanized Iron pipe, medium grade, with all required necessary fitting laid in trenches complete all as specified and as directed.

Supply and laying 25 mm bore galvanized Iron pipe, medium grade, with all required necessary fitting laid in trenches complete all as specified and as directed.

Supply and fix CI sluice valve flanged of class PN 1.6 conforming to IS-14846-2000 with iron wheel head, brass spindle and nut, ruber gasket, bolt and nuts of size 100mm dia bore complete all as specified and as directed.

Supply and fix gunmetal globe/gate valve 50 mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix gunmetal globe/gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Cutting of existing GI pipe laid 100 mm dia for inserting Tees for new connection of 100 mm x 50 mm dia complete all as specified and as directed.

Cutting of existing GI pipe laid 50 mm dia for inserting Tees for new connection of 50 mm x 25 mm dia complete all as specified and as directed.

DI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for Pipe upto 300mm bore complete all as specified and as directed. Make: Electrosteel casting ltd or equivalant Make of Tata / Electrotherm / Jindal / Kiswok / Kejriwal.

M&L for construction of brick masonry valve pit of size 60 cm x 60 cm x 60 cm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm thick MS sheet duly welded with provision of hinges, handle and locking arrangement including 40 x 40 x 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, applying two coats of anti-corrosive paint over a coat of red oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation & earth work in hard / dense soil complete all as specified and as directed.

saradhi construction combines (BID ID -3482355)