CONSTRUCTION OF NEW BUILDING OF MUNICIPAL CORPORATION ZONAL OFFICE DISTT. SURENDRANAGAR (2nd Attampt)

Surendranagar Municipal Corporation

NAME OF PROJECT : Construction of New Wadhwan Municipal Corporation Office At Distt. Surendranagar

Bill of Quantities

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. For R.C.C. work, brick work,

tile work, bathroon & toilet fixtures, windows & Doors and also ventilation.

Carryout Soil Investigation work including exploratory drilling of 150 mm

dia borehole 2 in nos. in all sorts of soil& Rock up to 10m depth from G.L,

collecting undisturbed samples at an interval of 1.5 m. depth, determining

depth of water table etc. Conducting necessary laboratory tests for all type

of classification and determination of soil parameters necessary for

determining pile capacity like density, shear and consolidation parameters

Contour surveysubmission

etc., including work for prepaing

of reportcontour

copiesbycovering

taking cross-section

investigation at

every 30M. intervals including all, labour materials and instruments. This

item includes the submission of autocad file of total site survey, etc

complete as per detailed, directed & approved by the consultant / EIC

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff

up to 50 Meter lead.(C) Hard Murrum, etc. complete as per detailed &

directed by EIC.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

6.00 disposited layer by ramming and watering. Cmt 2652.00 130.39

Filling in foundation and plinth with murrum or selected soil in layers of

7.00 20cm. thickness including watering, ramming and consolidating etc. Cmt 854.00 282.02

complete. (more than 10 ton)

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1%

8.00 concrentration inclusive of one litre chemical emulsion appication at the rate Smt. 868.00 56.63

of 5 Litre chemical /Sqm of sur face is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse sand : 4-

9.00 graded stone aggregates 20 mm nominal size) and curing complete Work in Cmt 292.00 3,631.49

(A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

10.00 reinforced concrete work in (A) Foundations, footings, Base of columns and Cmt. 390.50 4,626.81

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

11.00 reinforced concrete work in (B) Walls below the plinth Cmt. 21.50 6,655.90

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

12.00 reinforced concrete work in (B) Walls, for Ground floor Cmt. 10.00 6,655.90

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for First

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

16.00 reinforced concrete work in columns below plinth Cmt. 30.50 5,214.63

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Ground Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

18.00 reinforcement for RCC work in (D) For Columns for any type of cross Cmt. 45.50 7,019.69

sectional area at First Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Second Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Terrace Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

21.00 reinforced concrete work in Beams upto floor two level: PLINTH BEAM / Cmt. 137.00 6,177.16

Ground beam / Tie beam

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

22.00 reinforced concrete work in Lintels / Copping upto floor two level. Cmt. 26.50 6,120.60

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

23.00 reinforced concrete work in Chajjas upto floor two level. Cmt. 1.00 6,832.65

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

24.00 reinforced concrete work in © Slabs upto floor two level. : Grade slab Cmt. 108.50 4,749.02

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. :Ground Floor Staircase

Providing and laying controlled cement concrete M.250 and curing complete

26.00 including the cost of formwork and excluding the cost of reinforcement for Cmt. 4.50 6,652.05

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Providing and Cantilever

and laying controlledupto floorconcrete

cement two level. :Firstand

M.250 Floor Staircase

curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. : Second Floor Staircase

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

28.00 work in © Beams upto floor two level. . : GROUND FLOOR BEAM Cmt. 104.00 6,612.47

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

work in © Beams upto floor two level. . : FIRST FLOOR BEAM

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

30.00 work in © Beams upto floor two level. . : SECOND FLOOR BEAM Cmt. 104.00 6,691.63

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

31.00 work in © Beams upto floor two level. . : TERRACE FLOOR BEAM Cmt. 11.00 6,731.22

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

32.00 concrete work in (C) Slabs upto floor two level. :Ground floor Slab Cmt. 118.50 6,445.82

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

33.00 concrete work in (C) Slabs upto floor two level. :First floor Slab Cmt. 120.00 6,485.40

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

34.00 concrete work in (C) Slabs upto floor two level. :Second floor Slab Cmt. 118.50 6,524.98

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

35.00 concrete work in (C) Slabs upto floor two level. :Terrace floor Slab Cmt. 11.50 6,564.57

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

36.00 bending, binding and placing in position complete upto all floor level. kg 199587.50 76.21

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

37.00 Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Cmt. 37.00 4,051.78

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of AAC Panels of Thickness 125mm (Brand Name-

ZmartBuildwall by NXT Bloc) in line and level with consideration of below

Specification, Inculding cutting, groove filling with water proof bonding

sealent / Putty , at all height work as per IS : 6072 having a tongue groove

edge. The rate should also be include of all L clips, power tools nacessary to

cutting jointing and finishing work including PPEs, Filling of joint with the

bonding compound and wire mesh overlapping at both the sides about

mm. Mode of measurement would be a finish surface only. The rate also

include the cutout making at site in pre designing factored complete as per

detailed & approved by the consultant & directed by EIC.

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

Compressive Strength > 4 N/mm2

38.00 Flexural Strength > 1 N/mm2 Smt 1781.00 3,374.39

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Modulus of Elasticity 2190 Mpa

Provising and fixing of AAC Panels of Thickness 100mm (Brand Name-

ZmartBuildwall by NXT Bloc) in line and level with consideration of below

Specification, Inculding cutting, groove filling with water proof bonding

sealent / Putty , at all height work as per IS : 6072 having a tongue groove

edge. The rate should also be include of all L clips , power tools nacessary

to cutting jointing and finishing work including PPEs, Filling of joint with the

bonding compound and wire mesh overlapping at both the sides about

mm. Mode of measurement would be a finish surface only. The rate also

include the cutout making at site in pre designing factored complete as per

detailed & approved by the consultant & directed by EIC.

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

Compressive Strength > 4 N/mm2

39.00 Flexural Strength > 1 N/mm2 Smt 1105.00 3,374.39

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Modulus of Elasticity 2190 Mpa

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work

in superstructure upto floor level (B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in cement mortar 1:5 ( 1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Extra for half brick

41.00 masonry in superstructure above Second floor level upto Terrace floor level. Smt 20.00 641.16

(B) Conventional

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Provising and fixing of AAC Panels of Thickness 100mm (Brand Name-

ZmartBuildwall by NXT Bloc) in line and level with 8mm Thick Bison panel on

both side and consideration of below Specification, Inculding cutting, groove

filling with water proof bonding sealent / Putty , at all height work as per IS :

6072 having a tongue groove edge. The rate should also be include of all L

clips , power tools nacessary to cutting jointing and finishing work

including PPEs, Filling of joint with the bonding compound and wire mesh

overlapping at both the sides about 50 mm. Mode of measurement would

be a finish surface only. The rate also include the cutout making at site in

pre designing factored complete as per detailed & approved by the

42.00 consultant & directed by EIC. Smt 218.00 5,985.26

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

Compressive Strength > 4 N/mm2

Flexural Strength > 1 N/mm2

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Supplying Elasticity

Moulding 1 exact as per Image & specification

43.00 Size and complete as per detailed drawing & Directed by EIC. Smt 97.00 5,361.89

Supplying and fixing of GRC Moulding 2 (Window) exact as per Image &

43.01 specification Size and complete as per detailed drawing & Directed by EIC. Smt 24.00 5,361.89

Supplying and fixing of GRC Chattri exact as per Image & specification Size

43.02 and complete as per detailed drawing & Directed by EIC. Smt 190.00 5,361.89

Supplying and fixing of GRC Column 1 exact as per Image & specification

43.03 Size and complete as per detailed drawing & Directed by EIC. Smt 42.00 5,361.89

Supplying and fixing of GRC Arch exact as per Image & specification Size

43.04 and complete as per detailed drawing & Directed by EIC. Smt 18.00 5,361.89

Supplying and fixing of GRC Element 1 exact as per Image & specification

43.05 Size and complete as per detailed drawing & Directed by EIC. Smt 15.00 9,926.28

Supplying and fixing of GRC Element 2 exact as per Image & specification

43.06 Size and complete as per detailed drawing & Directed by EIC. Smt 1.00 5,361.89

Supplying and fixing of GRC Element 3 exact as per Image & specification

43.07 Size and complete as per detailed drawing & Directed by EIC. Smt 187.00 5,361.89

Supplying and fixing of GRC Element 4 exact as per Image & specification

43.08 Size and complete as per detailed drawing & Directed by EIC. Smt 46.00 5,361.89

Supplying and fixing of GRC Element 5 exact as per Image & specification

43.09 Size and complete as per detailed drawing & Directed by EIC. Smt 11.00 5,361.89

Supplying and fixing of GRC Jharokha 1 exact as per Image & specification

43.10 Size and complete as per detailed drawing & Directed by EIC. Smt 14.00 5,361.89

Supplying and fixing of GRC Jharokha 2 exact as per Image & specification

43.11 Size and complete as per detailed drawing & Directed by EIC. Smt 14.00 5,361.89

Supplying and fixing of GRC Railing 1 exact as per Image & specification

43.12 Size and complete as per detailed drawing & Directed by EIC. Smt 5.00 5,361.89

Supplying and fixing of GRC Railing 2 exact as per Image & specification

43.13 Size and complete as per detailed drawing & Directed by EIC. Smt 7.00 5,361.89

Supplying and fixing of GRC Thambli exact as per Image & specification Size

43.14 and complete as per detailed drawing & Directed by EIC. Smt 2.00 5,361.89

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment. Including

providing and fixing the jali with nails, etc complete as directed by the site-

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

45.00 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Smt 1483.00 163.85

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering above first floor upto

second floor level and finished even and smooth in (ii) Cement mortar 1:4

46.00 (1-cement :4-sand) Extra over items 58 to 64 for finishing with a floating Smt 1464.00 212.06

coat of neat cement slurry.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering above Second floor upto

Terrace floor level and finished even and smooth in (ii) Cement mortar 1:4

47.00 (1-cement :4-sand) Extra over items 58 to 64 for finishing with a floating Smt 1533.00 260.27

coat of neat cement slurry.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering Terrace floor level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Extra over items 58 to 64 for finishing with a floating coat of neat cement

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

49.00 (ii) Cement mortar 1:4 (1-cement :4-sand) Ground floor level Smt 790.00 123.13

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

50.00 (ii) Cement mortar 1:4 (1-cement :4-sand) First floor Smt 783.00 171.34

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

51.00 (ii) Cement mortar 1:4 (1-cement :4-sand) Second floor Smt 783.00 219.54

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

52.00 (ii) Cement mortar 1:4 (1-cement :4-sand) Terrace floor Smt 68.00 267.75

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete as approved and directed by Consultant / EIC.

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement

: 4 coarse sand ), furrowing the under layer with scratching tool, applying

cement slurry on the under layer @ 2 Kg of cement per square metre, top

layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone

chipping 10 mm nominal size), in panels with groove all around as per

54.00 approved pattern, including scrubbing and washing the top layer with Smt 2378.00 1,173.87

brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge (payment for providing

grooves shall be made separately).

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & laying average 18-20mm thick double coat water proof smooth/

wired finish cement plaster on sides of masonry work/ block wall/ RCC wall,

12 to 15mm thick first coat in CM 1:3 (1 cement : 3 coarse sand) by

spraying, second coat of 6mm of CM 1:3 (1 cement : 3 fine sand) and

mixing water proofing compound powder & liquid of approved make in

recommended proportions (by manufacturers) in both coats including

finishing with a flooting coat of neat cement slurry etc complete for all floor.

and shall be guaranteed for minimum period of 10 years after handing over

the completed building by the main contractor to be finished as directed.

Stamp paper guarantee 10 years to be furnished before receiving any

payment from the client. Waterproofing powder & liquid of approved make

recommended proportions is to be applied before each coat and final

finishing coat. (Item shall be operated for water retaining structures, sunks,

basement walls & Slab(10mmthk.) and other places specified by Architect/

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished

at all exposed Surface, Pre-moulded and pre-polished, machine cut Granite

of any colour and shade, & finish, as per detailed by architect /Consultant

for flooring, dado skirting, cladding, steps and risers, kitchen platforms,

vanity counters, window & Door sills , fascias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick

mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on In

dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

56.00 sand), joints treated with white cement, mixed with matching pigment, Smt 760.00 3,504.70

epoxy touch ups, including BSpacer tape 6.4 mm thick x 4 TO 6 mm as per

detailed groove, rubbing, curing, moulding and polishing to edges to give

high gloss finish as per concept etc. complete at all levels.

Providing and fixing 18 mm thick gang saw cut, Ruff [Send-blasted-

LAPORTA] polished in pattern & at all edges should be molded in rquired

finish, Pre-moulded and pre-polished, machine cut Granite of any colour

and shade, & finish & texture, as per detailed by architect / Consultant, for

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1

acid proof cement : 4 coarse sand). And In dado/skirting on In

dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

57.00 sand), joints treated with white cement, mixed with matching pigment, Smt 213.00 4,146.56

epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO 6 mm as per

detailed groove, rubbing, curing, moulding and polishing to edges [Ruff

[Send-blasted- LAPORTA] polished] to give high gloss finish as per concept

etc. complete at all levels.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

58.00 flooring and jointed with color cement slurry including finised with flush Smt 1266.00 1,204.20

pointing & cleaning the surface etc. complete for light shade / Dark Shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

59.00 flooring and jointed with color cement slurry including finised with flush Smt 173.00 1,397.83

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

60.00 coarse sand) and jointed with white cement slurry Smt 1822.00 1,141.45

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

61.00 mixed with pigment to match the shade of slab including rubbing and Smt 183.00 971.95

polishing etc. complete. (A) 25mm thick

Providing and fixing 0.70 meter wide sandwich type platform including

supplying and fixing granite stone 18 mm thick mirror polished stones in

top and side position and vertical strip at front over 25 mm thick polished

kota stone platform fixing in top and sides and intermediates supports

62.00 fixing with cement mortar and adhesive and finishing including making Smt 17.00 7,910.56

recess for Kitchen/ Laboratory sink etc. complete as approved and directed

by Consultant / EIC.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

63.00 with wooden shutter of size 2000 x 2400mm along with all hardwares etc. Smt 20.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

64.00 with wooden shutter of size 1200 x 2400mm along with all hardwares etc. Smt 32.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

65.00 with wooden shutter of size 900 x 2400mm along with all hardwares etc. Smt 108.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Providing and fixing of Shakti Hormann or Equivalent Hollow metal grooved

frames with flush doors. grooved frame profile confirming to IS 4351:2024

made of pressed galvanized steel confirming to IS 277 with the following

specification. Shutter shall be as per IS 2191 Part 2. Doors shall be

manufactured in ISO 9001:2015 certified company for quality management,

66.00 with wooden shutter of size 750 x 2400mm along with all hardwares etc. Smt 47.00 18,438.56

complete as per specifications, concept /direction and as per approved

make list & by Architect, and directed by Engineer-In-Charge.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc. (Size 1200 x 1500 ) along

with all hardwares etc. complete as per specifications, concept /direction

and as per approved make list & by Architect, and directed by Engineer-In-

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc. (Size 1200 x 900 ) along with

all hardwares etc. complete as per specifications, concept /direction and as

per approved make list & by Architect, and directed by Engineer-In-Charge.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc. (Size 1000 x 2400 ) along

with all hardwares etc. complete as per specifications, concept /direction

and as per approved make list & by Architect, and directed by Engineer-In-

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc. (Size 1800 x 1500 ) along

with all hardwares etc. complete as per specifications, concept /direction

and as per approved make list & by Architect, and directed by Engineer-In-

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing of Sliding Window - 2 Track, 2 Shutter window with

flymesh as per MYWINDOW SLIMLINE series or Equivalent. The extruded

aluminium sections of Alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by NALCO. The Size of profile sections

with average minimum thickness of 1.5 mm - 3 Track outer frame -

mm X 44.8 mm, Casement Z Shutter - 78.4 mm x 49 mm, Squre Clip SGU -

22.5 mm x 22.5 mm, Floating Mullion - 59mm x 43.4 mm, Door Mullion -

100 mm x 40 mm. Glass - 6 mm Clear toughened from Saint Gobain. All

externally visible surface and the internal visible surfaces will have powder

coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or

equivalent. The non visible aluminium surfaces will have minimum

chromatizing treatment. The outer frame should have 90º fabrication joint

with frame insert at all 4 corners made of nylon 6.6 material for better

resistance to water leakage.The sliding should have 90º fabrication joint

with inserted interface, antirattle plastic parts and antilift plastic. Interlocks

interface should have EPDM sealing in addtion to wool pile for better

resistance to air, water. All Hardware should be Euro Groove Type-1

compatible and handles/ locks should be from top Europians brands.

Rollers, woolpile, gaskets - all as per MYWINDOW standards, DOW Corning

silicon/ GE/ Wackers with SS 304 screws, etc. (Size 4000 x 2400 ) along

with all hardwares etc. complete as per specifications, concept /direction

and as per approved make list & by Architect, and directed by Engineer-In-

Providing and fixing of Ventilation - window of size 1800 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. Fix window with side fix for

exhaust fan provision as per Mywindow Standards. Series name is Simline

C40 Casement Series. All externally visible surface and the internal visible

surfaces will have power coating finish RAL 9010 of 60-70 micron

thickness, Jotun make or equivalent. The non visible aluminium surfaces will

72.00 have minium chromatizing treatment. All hardware should be Euro Groove Smt 4.00 9,582.88

type-1 compatible door handles, flush tower bolt, door hinges, dooe lock

should be from top Europians brands. Door closer, corner cleat, EPDM,

drainage cap, PVC inserts all as per MYWINDOW standars, DOW corning

silicon/GE/wackers with SS 304 screws, etc

Providing and fixing of Ventilation - window of size 600 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. Fix window with side fix for

exhaust fan provision as per Mywindow Standards. Series name is Simline

C40 Casement Series. All externally visible surface and the internal visible

surfaces will have power coating finish RAL 9010 of 60-70 micron

thickness, Jotun make or equivalent. The non visible aluminium surfaces will

73.00 have minium chromatizing treatment. All hardware should be Euro Groove Smt 7.00 11,623.08

type-1 compatible door handles, flush tower bolt, door hinges, dooe lock

should be from top Europians brands. Door closer, corner cleat, EPDM,

drainage cap, PVC inserts all as per MYWINDOW standars, DOW corning

silicon/GE/wackers with SS 304 screws, etc

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of Ventilation - window of size 1200 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. Fix window with side fix for

exhaust fan provision as per Mywindow Standards. Series name is Simline

C40 Casement Series. All externally visible surface and the internal visible

surfaces will have power coating finish RAL 9010 of 60-70 micron

thickness, Jotun make or equivalent. The non visible aluminium surfaces will

74.00 have minium chromatizing treatment. All hardware should be Euro Groove Smt 1.00 9,582.88

type-1 compatible door handles, flush tower bolt, door hinges, dooe lock

should be from top Europians brands. Door closer, corner cleat, EPDM,

drainage cap, PVC inserts all as per MYWINDOW standars, DOW corning

silicon/GE/wackers with SS 304 screws, etc

Providing and fixing of Ventilation - window of size 705 x 600 - Non

openable as per Mywindow Simline series or Equivalent. The extruded

aluminium sections of alloy 6063 tolerances confirming to DIN standard

from approved raw material sources by Nalco. Fix window with side fix for

exhaust fan provision as per Mywindow Standards. Series name is Simline

C40 Casement Series. All externally visible surface and the internal visible

surfaces will have power coating finish RAL 9010 of 60-70 micron

thickness, Jotun make or equivalent. The non visible aluminium surfaces will

75.00 have minium chromatizing treatment. All hardware should be Euro Groove Smt 3.00 11,623.08

type-1 compatible door handles, flush tower bolt, door hinges, dooe lock

should be from top Europians brands. Door closer, corner cleat, EPDM,

drainage cap, PVC inserts all as per MYWINDOW standars, DOW corning

silicon/GE/wackers with SS 304 screws, etc

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square

76.00 or round bars with round headed bolts and nuts or by screws (A) Plain Grill. Kg 6464.70 114.44

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS

pipe of 16 gauge, round balustrade of 38mm [50mm 16G Grade 304 with

glossy finish consisting of 38 NB or nearest size vertical posts 900 Height at

maximum spacing 900c/c with suitable cups at bottom and top rail of 50 NB

or nearest size & intermediate rails of 20 NB or nearest size etc complete]

with complete assembly of SS studs to house the horizontal 16mm pipes

and top handrail, bend and coupler to be used as per architectural detail

drawings for the railing in parapet, stair etc. including fabricating, hoisting,

77.00 fixing in position with angle cleats, holdfast etc. in RCC or masonry in true Rmt 36.00 3,563.68

line level and plumb, including complete assembly, including matt polishing

and buffing complete, including scaffolding etc. complete as directed by

EIC.(Actual length of stair railing shall be measured at site & same shall be

paid. No wastage should be measured or paid.)

Providing and fixing in position S.S. daso by providing top 50 mm dia stain

less steel pipe rail with starting and end point vertical post of 50 mm dia

with wall/column including bending welding and fixing for staircase and

balcony as directed.(testing is required of s.s 304) for all floor.

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of Engineer

in charge.Column ( 122 x 61 x 3.6mm

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth & Wall painting (two coats) with

plastic emulsion paint of approved brand and manufacture on undecorated

80.00 wall surface to give an even shade including throughly brushing the surface Smt 3925.44 119.49

free from mortar droppings and other foreign matter and sand papered

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth & Wall painting (two coats) with

plastic emulsion paint of approved brand and manufacture on undecorated

Ceiling surface to give an even shade including throughly brushing the

81.00 surface free from mortar droppings and other foreign matter and sand Smt 2424.00 122.67

papered smooth. Extra over item 57 for

painting with plastic emulsion paint of approved brand on ceilings and

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

82.00 the surface to remove all dirt, and remains of loose powdered materials.etc Smt 175.00 114.53

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

83.00 2006 including 35 mm Sand layer for levelling and filling the joint with sand Smt 500.00 683.88

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing & Laying M250 grade concrete trimix using P21 (water reducing

concrete admixture at 100 ml per bag of cement & recon 3 s fiber at

gm per bag of cement including carrying out vaccum dewatering and power

floater treatment in floors well compacted mechanically vibrated finish to

require levels making C channel 75 x 75 mm required to maintain level

85.00 slope and thickness of the concrete road leveling of placed concrete with Cmt 55.00 8,452.77

surface vibrator and finishing with power floater & trowel light brooming the

surface & including cutting & filling of expansion joint as directed by

Engineer in charge

Providing and fixing Directional and Informative Signages- SS Plate, Grade

304, Brush finish, 2mm Thickness with smoothen corner edges, Acid

86.00 etching with duco color, SS studs 1.5' away from wall.fitting as per dirction Smt 14.00 92,433.18

of Architect and EIC

Providing and fixing 12' height, 1.5" EMBOSSED Mat / polished / colored SS

LETTERS MADE FROM 1mm thick 304 quality SS sheet cut outs on front Per

87.00 surface, 0.5mm thick Mat / polished / colored 304 quality Sheet for emboss 50.00 1,414.00

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity 0.043° w/m

KC.for the best thermal Insulation. The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of 24X38mm made from 0.30 mm

thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm

made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on periphery

88.00 walls/partitions on a perimeter wall angle pre-coated steel of size Sqm 1025.00 1,648.96

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of

rawl plugs at 450mm centre to centre with 25mm long dry wall screws @

230mm interval and laying 15mm thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in

the grid including, cutting/making opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’

runners to be suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall be pre-painted with polyester

baked paint, for all heights, as per specifications, drawings and as directed

by engineer in charge.Note:- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for exposed

frames/opening (cut outs) having area less than 0.30 sqm. The calcium

silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non

combustible as per B.S. 476 part IV, 100% humidity resistance and also

Pro. And thermal

fixingconductivity.

single layer0.043°

waterw/m KC.for

board 12.5 Insulation.

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center

to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

89.00 edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt Sqm 224.00 606.95

connecting cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

90.00 using white cement including rounding off junctions and extending them Smt 690.00 747.29

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane (ELASTOROOF PU– Sunanda speciality pvt coating ltd

or Equivalent) over uniform surface of slab. Apply 2 coats at dosage of

kgs per sqm to achieve the required minimum DFT of 1.5mm. It should

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700%

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter.Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

shall be concealed in wall as directed necessary fittings such as bends,

93.00 shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, Rmt 437.50 831.22

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type

B pipe confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved make

for drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

94.00 shall be concealed in wall as directed necessary fittings such as bends, Rmt 285.50 835.15

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

100.00 complete as per the instruction of EIC. (C) 25 mm. Dia Each. 69.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve etc.

101.00 complete as per the instruction of EIC. (E) 40 mm. Dia Each. 78.00 663.43

Providing and fixing screw down bib taps of following size.(A) Brass screw

102.00 down bib tap polished bright. (i) 15mm dia. Each. 30.00 184.98

Providing and fixing brass screw down stop tap.(C) 25mm dia.

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter

with 150 mm X 150mm S.S.jali for floor or nahni trap of the following

nominal diameter of self cleansing design with C.I screed down or hinged

104.00 grating including the cost of cutting & making good the walls, as per Each. 51.00 525.83

detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

105.00 standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each. 15.00 1,279.40

Supplying and fixing reinforced concrete heavy duty non pressure pipes with

collars for culverts carrying heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i) 300mm dia.

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete for (i)

Inside dimensions 455mmx 610mm & 450mm deep for single pipe line.

etc. complete as per detailed, directed & approved by the consultant / EIC.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished

with a floating coat of neat cement & making channels in cement 1:2:4 mix (

1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

smooth complete including curing & testing… ( I ) inside 900mm x

mm & 1.5 m deep including R.c.c. cover with frame size 560 mm diameter (

A ) with 230mm thick walls of brick masonry using brick having crushing

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),

(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as

per detailed, directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter wash

basin with single hole for pillar type with Cl or MS brackets painted white

including cutting holes, ranking bolts for Fixing & marking good the same,

including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm

dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down

high pressure with screw shank & back nuts & rubber plugs, 15mm dia

brass stop cock (50/75mm p.v.c. Drain connection pipe, Water Connection

Pipe of required Size, & testing the same for leak proof, etc. with all material

& labours to complete this job in all respected manners, etc. complete as

per detailed & approved by the consultant & directed by EIC.

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash

down water closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet

110.00 Spray, Health Fauset Heavy duty with hook with fitting, Metropole, Incl. Each. 25.00 5,965.72

Connection and rubber buffers. (A) Vitreous China., etc. complete as per

detailed & approved by the consultant & directed by EIC.

providing and fixing water closet squatting pan(Indian type W.C. pan ) size

580 mm of ESSCO Make including providing and fixing vitreous china

mm size 'P' or 'S' trap including jointing the trap with pan and soil pipe in

CM (1:1) (1 cement :1 fine sand) etc complete. As per instruction given by

111.00 engineer in charge. (A) Vitreous China., etc. with all material & labours to Each. 3.00 936.96

complete this job in all respected manners, etc. complete as per detailed &

approved by the consultant & directed by EIC.

P/F approved brand Flat Back Urinal of ESSCO Make For Gents Toilet with

15mm Push & stop tap of approved brand including connection the urinal

with rigid pvc nozzle & pvc connection pipes & bottle trap in trap etc.

complete as directed by engineer in charge (A) Crystal White flat back or

112.00 corner type size 590 mm X 375 mm X 390 mm, etc. with all material & Each. 12.00 1,036.27

labours to complete this job in all respected manners, etc. complete as per

detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden

plugs with C.P. brass screws & washers, etc. with all material & labours to

113.00 complete this job in all respected manners, etc. complete as per detailed & Each. 20.00 833.73

approved by the consultant & directed by EIC

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing handicap toilet set with Wall-mounted European Closet &

wash basin & all handicap requirement with dual flush tank, seat & lead

(heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted

brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings

complete with grab rails etc. rubber buffers, C.P nuts, bolts etc making

holes in walls & floors, & finishing for ready to use. The rate includes all

necessary connection charges as per product detail to the satisfaction of

Architect / engr. in-charge where required & the final handing over etc.

complete as per specifications, drawings & as directed by the Engineer-in-

charge. The scope includes following items: EWC with seat cover & dual

flush tank & WASH BASIN SET: - CERA 'CRUSE SET' as approved by Architect

/ consultant & Directed by EIC.

Providing & Fixing pillar tap, screw down high pressure with screws, shanks

115.00 & back nuts. (i) 15mm dia. Each. 20.00 308.73

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

116.00 painted white including cutting holes in walls and making good the same Each. 3.00 2,280.27

but excluding fittings.

Providing erecting and fixing double coated ISI water tank of required

117.00 capacity each with all necessary fittings and connection etc. complete on Ltr. 25000.00 3.95

Lowering of Submersible pump set complete with required nos and size of

Column pipe ( GI / HDPE pipe) erected by means of proper chain pulley

block & pipe wrenches after checking of threads of each pipe with coupling

118.00 to take the load of the pump set and pipe assembly filled up with water with Job 5.00 2,932.79

trail testing, wiring GEB test report.

Single phase submersible pump motor set with control panel. (c) Motor

119.00 rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head Set 5.00 21,694.80

suitable for 32 mm dia. delivery pipe, Cat Q- II

120.00 Flat PVC cable size 4.0 sq.mm Mts. 150.00 85.85

121.00 HDPE pipe - 40 mm dia. Mts. 150.00 126.25

Providing and fixing in position U.P.V.C. cowl went to pipes. (C) 100mm dia

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight

123.00 not less than 35Kg. Each. 5.00 958.17

Providing and fixing chromium plated brass half turn flush cock of approved

124.00 quality including fixing in pipe line etc. complete.(ii) 25mm dia. Each. 20.00 263.77

Providing & fixing 1mm thick (Or specified) Designer Laminate of approved

shade and color on plywood, Cement bonded particle board or any surface

125.00 as per shown in drawing with required adhesive complete as per directed by Sqm 63.00 710.29

Architect and EIC.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing laminate finish partition up to false ceiling ht and Low

height partition (thickness of partition is 82 mm or as specified in drawing)

having 12 mm thick marina plywood IS 710 grade both side on aluminum

framing of gauge 16. Aluminum framing size for vertical & horizontal

support is 50 mm x 25 mm. Grid of aluminum framing is 600 mm x

mm. All exposed surfaces finished with 1 mm thick Laminate of approved

shade complete with mat finish. Necessary framing to be erected above

false ceiling. No extra cost to be paid for the same. Before installation, make

hole/face plate for conduit pipes of electrical / networking cables with open

able stud from partition Including all materials and labor etc. Make

necessary grooves as per shown in drawing. Using of 12 mm thick clear

glass with proper crystal edges & with suggested frosted films on glass. All

126.00 joints are covered with teakwood beading Patti finished with polish Sqm 120.00 6,620.55

matching with laminate. Including door of same design if required

Complete with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In charge.

Contractor has to provide all necessary cut outs (race ways.) for Electrical

works & no extra payment shall be made for it.

The works include providing & fixing of Ply Board Ceiling which

Incorporates a fully concealed Aluminum grid. Complete with all necessary

hardware, fittings and accessories. Finish with suggested laminates. The

job also includes providing access panels, cutting of spot lights, luminaries,

speaker, etc. Sheets in size 8’ x 4' Laminates 1 mm in thickness of pattern

shown as per drawings.. ½” (or 3/8”) screwed on steel stud system. The

steel stud frame consisting of main furring Alum channel at every 600 mm

and cross channel at every 600 mm. Both main and cross channels are

attached though jaw clip. Screws will be corrosion proof either Chromised or

Cynated. Screw fixing is done mechanically with drilling machine & suitable

127.00 attachment. The gaps will be initially filled with jointing compound and Sqm 138.00 4,399.65

then taped by self adhesive covered with proper jointing

compound..Contractor has to provide all necessary cut outs for Electrical

works & no extra payment shall be made for it. Complete as per details

given in drawing and as per instructions of Architect/consultant/Engineer In

CORIAN FINISH TOP TABLE Includign Side Unit (Head Tables)

Providing & fixing work station / table having ht of 750 mm Top, with MS

Pipe Structure of Frame as per Architect/ Engineer Design or Selection and

Back Ply of table is also made up of 19mm Thick. top of Table is Covered

with Wooden Finish Planks or Corian Finish Top as Per Requirement and All

internal & external Joints finished with Burma teak bidding Patti. Bottom Part

of Table is Sectionized with MS Perforated Sheet. All exposed and internal

surfaces covered with Wooden Planks or Corian Finish approved shade &

Complete as per detail drawings & as instructed by Architect/consultant/

128.00 Engineer In charge. Complete with all necessary hardware like nails, ss Sqm 12.00 38,471.30

screws, table chain, Key board trey, TDS channel, adhesives etc. Contractor

has to provide all necessary cut outs for Electrical works & no extra payment

shall be made for it. Price is including the Side unit, only main table top Sqm

will be measured. All ply should follow IS

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Class-1 / Class-2 / Executive Tables / Conference with Side Unit and

Providing & fixing work station / table having ht of 750 mm Top, with

12/19mm thk ply framing or MS Pipe Structure of Frame as per Architect/

Engineer Design or Selection with specified powder coating and Back and

side Ply of table is also made up of 19mm Thick. Top of Table is 19mm thk

ply with laminate Finish Per Requirement and All internal & external Joints

finished with teakwood beading Patti. Common or front Part of Table is

Sectationized with MS Perforated Sheet. All exposed and internal surfaces

covered with Laminate Finish of approved shade & Complete as per detail

129.00 drawings & as instructed by Architect/consultant/ Engineer In charge. Sqm 96.00 29,350.96

Complete with all necessary hardware like nails, ss screws, table chain, Key

board trey, TDS channel, adhesives etc. Contractor has to provide all

necessary cut outs for Electrical works & no extra payment shall be made for

it. Price is including the Side unit, only main table top Sqm will be measured.

All ply should follow IS

Staff Tables / Lunch tables / General meeting without drawers

Providing & fixing office table / staff table having ht of 750 mm Top, with

19mm thk plywood or MS pipe Structure as per Architect/ Engineer Design

or Selection and Back and side Ply of table is also made up of 19mm Thick.

Top of Table is 19mm thk ply with laminate Finish Per Requirement and All

internal & external Joints finished with teakwood beading Patti. Item

includes fixing of drawers and keyboard tray and storage with shutters

under table as per drawing. With grooves shown as per drawing. All exposed

and internal surfaces covered with Laminate Finish of approved shade &

130.00 Complete as per detail drawings & as instructed by Architect/consultant/ Sqm 14.00 27,130.54

Engineer In charge. Complete with all necessary hardware like nails, ss

screws, table chain, TDS channel, adhesives etc. Contractor has to provide

all necessary cut outs for Electrical works & no extra payment shall be made

for it. All ply should follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open Front

Side for Selves with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading and Teakwood molding as per design. Back

ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Laminate

& internal surfaces are covered with 1 mm thick laminate. External &

131.00 internal joints covered with beading Patti complete with polish finish. With Sqm 1.00 10,381.62

grooves shown as per drawing. All complete with proper hardware like, S.S.

Screws, MS Nails, Magnets, cable manager SS 304 etc. All Details as per

shown in detail drawings & as per instructions of architect/consultant / in

charge engineer

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete with

proper teakwood beading. and Teakwood molding as per design. Back ply is

12 mm Marin ply. All exposed are covered with 1 mm thick Laminate &

internal surfaces are covered with 1 mm thick laminate. External & internal

132.00 joints covered with beading Patti complete with Polish finish. With grooves Sqm 152.00 13,815.77

shown as per drawing All complete with proper hardware like locks, S.S.

Screws, MS Nails, Magnets, table chains, cable manager SS 304 Handles of

250 mm and 100 mm dia etc. All Details as per shown in detail drawings &

as per instructions of architect/consultant / in charge engineer

Notice Board / Pin Board

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing

133.00 Arrangement complete as per drawing and Directed by Engineer In Charge Nos 30.00 7,259.38

Providing and fixing 3 Seater benches of powder coated and chrome plated

134.00 MS sections. With PU pads on seat Nos 65.00 10,100.00

Supplying and providing High Back leatherite office Chair (Type-1) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

135.00 -360 swivel motion/ 100mm stroke gas Nos 8.00 18,180.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing High Back leatherite office Chair (Type-2) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

136.00 -360 swivel motion/ 100mm stroke gas Nos 18.00 16,160.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back leatherite office Chair (Type-1) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

137.00 -360 swivel motion/ 100mm stroke gas Nos 78.00 14,645.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back leatherite office Chair (Type-2) As per

specification below:

-Metal frame seat made of Leatherite upholstery (foam base)

-Fixed Arm rest

-Knee tilt mechanism

138.00 -360 swivel motion/ 100mm stroke gas Nos 80.00 12,120.00

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

-100mm class 4 gas lift

139.00 -PP Fixed Arm rest Nos 101.00 5,024.65

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Waiting Sofa (One Seater) : @ 900(L) x 870 mm (B) x 800 mm (H) comprising

up of Solid teak wood with PU semi gloss finished polish. The seat shall

mm th 40 density & back shall be 32 density foam & finished in Approved

fabric upholstery as per the drawing/image and instruction from

Architect/EIC all external & internal exposed woodwork to be finished in PU

semi gloss finish polish. .The work shall be done as per drawing

specifications, sample approved and as directed by the Architect and

Engineer-in-charge. The rate shall be for complete item inclusive of all

140.00 material, labour, wastages, necessary tools & tackles, approved make for all Nos 12.00 16,551.38

floors, all heights, all levels and all places within campus. Contractor shall

do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this. Rate shall inclusive of providing mockup

sample for approval of architect. Basic rate of fabric 800/ Rmt

Waiting Sofa (Two Seater) : @ 1500(L) x 870 mm (B) x 800 mm (H)

specification for complete work .

Waiting Sofa (Three Seater): 2100mm (L) x 870 mm (B) x 800 mm (H)

142.00 specification for complete work . Nos 14.00 35,861.31

Center Table:750 x 750x 450 mm

Providing fixing center Table comprisig from 303 BWR ply framing with

laminate finish matching with other furniture with 12mm thick top including

rubber buffers and wooden legs at the bottom of table, , including all type

143.00 of hardware, fittings, fixtures , tools , tackles , etc complete as per detailed Nos 34.00 26,133.75

drawing. The work shall be done as per the specifications, sample

approved and as directed by the Architect and Engineer-in-charge.

Side Table:450 x 750x 450 mm

Providing fixing center Table comprisig from 303 BWR ply framing with

laminate finish matching with other furniture with 12mm thick top including

rubber buffers and wooden legs at the bottom of table, , including all type

144.00 of hardware, fittings, fixtures , tools , tackles , etc complete as per detailed Nos 47.00 13,066.88

drawing. The work shall be done as per the specifications, sample

approved and as directed by the Architect and Engineer-in-charge.

Supplying and providing dust bin made of 100% virgin plastic with paddle.

145.00 Capacity-10 to 15 Ltr. Nos 100.00 557.52

Supplying and providing dust bin made of 100% virgin plastic with paddle.

146.00 Capacity-120 L Nos 10.00 1,568.03

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch with

speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and warranty etc

as per manufacturer’s specifications. Fabric to be as per approved sample.

All the work complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC with

Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm, Openness

Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar reflection (white)

65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Strength

(Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN,

Fungi static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire

Retardancy:B-s2,d0/EN 13501-1. All complete as per approval of designer &

instruction of Project Manager. (The mode of Measurement: The size of the

blind will be measured from end to end bracket (Left to Right bracket) &

height will be measured from top of the pelmet till the bottom of the bottom

Providing and fixing God / Godess idol (Material- Fibre) 5 ft tall, with

proportionately base dimenstion as per approved design by client and

148.00 complete as per instruction of engineer-in charge and consultant. Nos 1.00 150,995.00

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame

149.00 of size 2in x 1in consisting 6mm thick ply in back with digital vinyl printing Nos 300.00 4,065.25

and 5mm thick glass on top if required.

Supply and Installation of 55'' LED Display.

Providing and supplying 55" LED smart TV with 7 Series,17.2 Kg,3840 x

2160 Pixelsmp3,audio Wattage 20 Watts,4K series (Resolution: 3840 x

2160p), Refresh Rate: 120 hertz --Connectivity - Input: 3*HDMI, 2*USB,

150.00 Warranty Information: 1 year, Product Dimensions 6 x 123.9 x 71.4 cm, Nos 32.00 90,900.00

make with need hardware hang on wall paneling obs are included all taxes,

as directed by engineer and architect.

Supply and Installation of 75'' LED Display. Samsung Ultra HD (4K) LED

151.00 Smart TV, model - UA75NU7100KXXL, Sound output 20 W. Nos 3.00 131,300.00

Providing and fixing Directional and Informative Signages- SS Plate, Grade

304, Brush finish, 2mm Thickness with smoothen corner edges, Acid

152.00 etching with duco color, SS studs 1.5' away from wall.fitting as per dirction Sqm 9.00 92,433.18

of Architect and EIC

Providing and Fixing Name in Gujarati Letter SS304 1mm thick letter 1.5"

153.00 depth 10" Height with Duco color & fitting as per direction of Architect & EIC. Job 1.00 52,520.00

PUMP Supplying, installation, testing and commissioning of electric driven

Main Fire Pump suitable for automatic operation and consisting of following,

complete in all respects, as required : (a) Horizontal type, multistage,

centrifugal, split casing pump of cast iron body & bronze impeller with

stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable

HP Squirrel cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts,

3 phase 50 Hz, AC supply with IP 55 protection for enclosure,

horizontal foot mounted type with Class-'F' insulation, conforming to IS-

325. (c) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. (d) Suitable cement concrete

foundation duly plastered with anti vibration pads. 1.1 2850 lpm at 88 m

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump) Horizontal

type, multistage, centrifugal pump of cast iron body and bronze impeller

with stainless steel shaft, mechanical seal conforming to IS :

Suitable HP squirrel cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation,

conforming to IS : 325. M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required. Suitable cement

concrete foundation duly plastered and with anti vibration pads. 3.1

lpm at 88 m Head.

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and

consisting of following, complete in all respects, as required : (Diesel

Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. Suitable HP, 1500 RPM water cooled with

radiator, diesel engine conforming to relevant IS standard complete with

auto starting mechanism, 12 /24 volts electric starting equipment, diesel

tank, exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick

aluminium sheet cladding, residential silencer, instruments and

156.00 protection as per standard specification, stop solenoid for auto stop No. 1.00 538,739.13

in the event of fault with audio indications, painted with post office

red colour etc. as required. M.S fabricated, common base plate,

coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

2.7 1620 lpm at 88 m Head

Fabrication, supply, Installation testing & commissioning of Electrical control

panel of cubical construction, floor mounted type, fabricated out of 2mm

thick CRCA sheet, compartmentalised with hinged lockable doors, dust

and vermin proof, powder coated of approved shade after 7 tank

treatment process, cable alley, interconnection with suitable size copper

conductor cable/solid copper strip, having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering etc. complete

in all respect, suitable for main fire pump, pressurisation pump & diesel

pump set complete as per CPWD specification with following in coming and

outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac supply

with enclosure protection class IP 42 as required : 5.1 INCOMING - 400A,

157.00 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with No. 1.00 318,497.51

selector switch Digital Ammeter (0-400 A) with selector switch & CTs

etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating

lamps Set of Copper Bus Bar 300A. OUTGOING (Note : All outgoing

feeders for pumps should have digital Ammeter with selector switches

and LED type ON, OFF, trip indicating lamps)

158.00 Supply of 12 V Battery, Coolant, Engine Oil and Diesel Tank. Set 1.00 29,957.63

Supplying and fixing of Air Vessel made of 250mm dia., 8mm thick MS

sheet, 1200mm in height with air release valve on top and flanged

connection to riser, drain arrangement with 25mm dia. gun metal wheel

159.00 valve with required accessories, pressure guage and painting with No. 1.00 15,615.63

synthetic enamel paint of approved shade as required.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 200mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification.150 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification.100 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 80 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 50 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 40 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 25 mm dia.

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming

to IS 780 of following sizes as required. 100mm

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming

to IS 780 of following sizes as required. 80 mm dia.

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming

to IS 780 of following sizes as required 150 mm dia.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete with

170.00 nuts, bolts, washers, gaskets and conforming to IS 13095 of following No. 3.00 7,669.15

sizes : 150 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete with

171.00 nuts, bolts, washers, gaskets and conforming to IS 13095 of following No. 1.00 5,706.50

sizes : 100 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete with

172.00 nuts, bolts, washers, gaskets and conforming to IS 13095 of following No. 1.00 4,264.25

sizes : 80 mm dia.

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

173.00 bolts, nuts, washers etc. as required : 150 mm dia. No. 3.00 15,223.61

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

174.00 bolts, nuts, washers etc. as required : 100 mm dia. No. 1.00 9,458.05

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

175.00 bolts, nuts, washers etc. as required : 80 mm dia. No. 1.00 6,582.98

Supply, Installation, Testing and Commissioning of Gun Metal Air

176.00 Release Valve with necessary fittings. Size: 25 mm dia. No. 6.00 1,069.91

Supply, Installation, Testing and Commissioning of 100 mm dia.

Pressure Gauge (for all pipes) of range 0 - 15 Kg/cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast aluminium,

stove enameled, black, weather proof case with outer, screwed

177.00 aluminium bezel and complete with necessary U-type stainless steel No. 3.00 1,198.30

siphon tube and cock including providing suitably painted angle iron

support to the tube etc. as per required.

Providing and fixing of pressure switch in M.S. pipe line including

178.00 connection etc. as required. No. 3.00 1,323.27

Pump house Cabling : Providing, fixing, testing & commissioning of

179.00 Sq.mm. 3 Core Alluminium Armoured Cable of required size from Panel to Rmt 350.00 333.82

Providing, installation, testing & commissioning of Y Type Strainer

180.00 fabricated out of 1.6mm thick stainless steel, grade 304, sheet with 3 mm No. 3.00 9,538.51

dia. holes with stainless steel flange. 150mm

Supplying and fixing Single headed internal Fire Hydrant Valve with

instantaneous stainless steel coupling of 63mm dia. with cast iron

181.00 wheel ISI marked conforming to IS:5290 (Type-A) with blank cap and No. 14.00 5,254.57

chain required.

Supplying and fixing of 63 mm dia. Gun metal short branch pipe with

mm nominal internal diameter size nozzle conforming to IS 903, suitable

182.00 for instantaneous connection to inter connect hose pipe coupling as No. 7.00 2,067.93

required. Gun metal.

Supplying and fixing of 63 mm dia., 15 m long RRL hose pipe with 63 mm

dia. male and female coupling duly bound with G.I. wire, rivets etc.

183.00 conforming to IS 636 (Type-A) as required. Gun metal. No. 7.00 4,452.55

Supplying, Installation, Testing and Commissioning of Weather proof

Standard Fire Hose Cabinet wall mounting type (750 mm x 600 mm x

250 mm deep) having single or double opening with necessary locking

arrangement by allan key suitable for housing 2 nos. hose pipe, 1 no.

branch pipe & nozzle spanner.

Supplying and fixing of Fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

185.00 chain as required for suitable dia. M.S. pipe connection conforming to Set 1.00 11,960.79

IS:904 as required : 4 way 150mm.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and fixing of Fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

chain as required for suitable dia. M.S. pipe connection conforming to

IS:904 as required : 4 way 100mm dia.

Supply and fixing First Aid Hose Reel with M.S. construction spray painted

with P.O. red, conforming to IS:884 complete with the following as

required. 20mm nominal internal dia. water hose thermoplastic

(textile reinforced) type-2 as per IS:12585, 20mm nominal internal dia.

187.00 gun metal globe valve and nozzle, drum and brackets for fixing the No. 7.00 7,425.21

equipment on the wall. Connection from riser with 25mm dia. stop gun

metal valve & MS pipe and socket. 30 mtr.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Powered loop Manual Call point with built-in Fault

isolator, housing & glass - red. Item as per drawing and

specification, as approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Bus supplied Power Loop Sounder with built-in flasher,

8 Different Selectable Tones. Shall have a 'soft start' feature controlled

189.00 by the fire alarm panel. Item as per drawing and specification, No. 6.00 4,040.00

as approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Four Loop Addressable Intelligent Main Fire Alarm

control panel with operating front panel with network card, Keypad

300 characters & Multi lines alphanumeric display, 10,000 events memory,

On board Printer interface for external printer, battery backup. Item as

per drawing and specification, as approved by Electrical Engineer in charge.

Supplying and laying of 2 x 1.5 sq.mm fire alarm armoured cable

600 / 1000 V rated with annealed copper conductor having XLPE

191.00 insulation, steel wire armouring & FRLS outer sheath complete as required. Rmt 2000.00 148.08

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Below False Ceiling Addressable ideal optical smoke

detector for detecting visible smoke particles with mounting base. Item as

per drawing and specification, as approved by Electrical Engineer in

Providing, fixing, testing & commissioning of 15mm dia. quartxoid

193.00 bulb type sprinklers of rating 68 degree centigrade with required No. 221.00 446.79

accessories : Pendent sprinkler.

Providing & fixing photo luminescent Signage's as per IS standard in Block /

Small Letters on rigid sheet with necessary wall or Ceiling fittings as

194.00 specified Sizes : For Fire Extinguisher, Exit, Do not to do etc. No. 60.00 226.83

Supply, installation, testing and commissioning of ABC type 6 kg.

confirm to IS:15683, with ISI marked / TAC approved fitted with

195.00 required accessories including wall suspension brackets. No. 8.00 1,369.49

FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked

/ TAC approved fitted with required accessories including wall

suspension brackets.

Supply, installation, testing and commissioning of Modular ABC type 5 kg.

confirm to IS:15683, with ISI marked / TAC approved fitted with

197.00 required accessories including wall suspension brackets. No. 6.00 1,369.49

Supply, installation, testing and commissioning of Stainless Steel Ball

Supplying, Installing, Testing & Commissioning of M.S. structural steel

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installing, Testing and Commissioning of C.I. heavy duty

foot valve with flanges, nut bolts, gaskets etc. with necessary

200.00 complete accessories. 150 mm dia. No. 1.00 14,122.88

Supply, Installing, Testing and Commissioning of C.I. heavy duty foot

201.00 valve with flanges, nut bolts, gaskets etc. with necessary complete No. 2.00 10,472.33

accessories. 100 mm dia.

Point wiring in Copper (Modular)--Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.--(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in / flushed on wall/ceiling, complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.--Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.--(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed--(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

205.00 erected with following type of accessories.--[I] For 6A Plug and 6 a switch Pt. 190.00 553.00

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board--(f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

206.00 erected with following type of accessories.--[II] For 16A Plug and 16 amp Pt. 110.00 815.00

switch with 2-2.5 sq.mm Cu. Wire from mcb db board.--(f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete. CAT III

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessories.--Single mounting base-frame & Textured /

Metallic front plates. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling ,complete with 6A Modular type

switches and following type of accessories erected on PVC / Metallic box,

single mounting base frame covered with textured / metallic front plate

208.00 modules erected on / in wall / ceiling as per pipe erected. with necessary Pt. 10.00 653.00

batten/angle holder or ceiling rose or H.D.Connector as directed.--(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat-III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

209.00 per site situation directed by Engineer In charge. --(3) Two Pin/RJ-11 Ea. 100.00 178.00

Telephone Socket- [A] For One Gang Cat-III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge

(7) Blank Plate Single Cat-III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

211.00 per site situation directed by Engineer In charge.--(8) Computer RJ-45 Ea. 110.00 178.00

socket . cat-lll

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed--b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

213.00 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 Mtr. 1000.00 23.00

Mains & Wires--Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

214.00 FRLS PVC insulated stranded wire of green colour for earth continuity of Mtr. 15000.00 68.00

following size (a) with medium class Rigid PVC pipe and accessories--(a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (general

wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

216.00 green colour for earth continuity of following size (FRLS) (a) with medium Mtr. 2000.00 123.00

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables --(J) 3 1/2 core

Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables --(I) 3 1/2 core

Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

220.00 or in existing trench / pipe of following size of cables --(E) 3 1/2 core 95 Mtr. 200.00 565.00

Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

221.00 or in existing trench / pipe of following size of cables --(D) 3 1/2 core 70 Mtr. 200.00 434.00

Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

222.00 or in existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm Mtr. 2500.00 219.00

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

223.00 insulating tape etc for following size of cables.--(A) 2 to 4 core 2.5 / 4 Sq. Ea. 100.00 37.00

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

224.00 insulating tape etc for following size of cables. --(c) 2 to 4 core 10 Sq. mm Ea. 100.00 43.00

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

225.00 insulating tape etc for following size of cables. (E) 2 to 4 core 25 Sq. mm Ea. 130.00 59.00

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

226.00 with out going tails, insulating tape etc for following size of cables. (I) 3 & Ea. 6.00 326.00

1/2 core 300 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

227.00 with out going tails, insulating tape etc for following size of cables. (H) 3 & Ea. 8.00 288.00

1/2 core 240 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

228.00 with out going tails, insulating tape etc for following size of cables. (D) 3 & Ea. 2.00 152.00

1/2 core 95 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

229.00 with out going tails, insulating tape etc for following size of cables. (C) 3 & Ea. 2.00 119.00

1/2 core 70 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (K) 300 Sq.mm.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (J) 240 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (F) 95 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

235.00 switchgear terminals with brass/cadmium plated nut bolts in an approved Ea. 200.00 9.00

manner. (A) 1.5/2.5 to 6 Sq.mm

Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing

236.00 box. confirming to IS 8828/1996 with ISI Mark(QTY FOR MCB OF DB AND Ea. 400.00 130.00

MCB OF PANEL) Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity((QTY FOR MCB OF DB AND MCB OF PANEL)Also

consider in general) (A) 6-32 Amp Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

238.00 having following capacity. Ea. 35.00 860.00

(c) 63 Amp. Cat III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

239.00 to be used) suitable for-- Ea. 20.00 1,963.00

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)--(b) sheet steel double door (IP-43) (v) 16 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

240.00 to be used) suitable for-- Ea. 10.00 1,742.00

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)--(b) sheet steel double door (IP-43) (iv)12 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for --

(A) single phase incoming and horizontal single phase outgoing (b) sheet

steel double door (IP-43) (iii) 8 way

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of quick

action & tripping with all advance feature & do not incorporate any

electronic component.for following Max. rating erected as directed

(iii) 63 Amps. DP Cat-III

Providing and erecting MAIN LT PANEL

• Incoming : 1000 amps FP ACB (25 KA) with following accessories: 1 Set

ACB ON / OFF / TRIP indicating lights with control MCB’s. Under voltage

release 3 Nos. of 0-1000/ 5 amps CTR digital VAF with 3 nos 1000/

amps, 15 VA Class 0.5 CT’s. Digital type 0-500 Volt digital voltmeter with

inbuilt selector switch & shall be protected by 2 amp TP MCB’s--Bus Bars

1000amps FP aluminium bus bars with coloured heat shrinkable insulated

• Outgoing All the outgoing should be provided with RYB - On - Off - Trip

243.00 I/L . (For MCCB only) Ea. 1.00 935,000.00

- 630A FP MCCB MP BASED :-1 No APFC PANEL

- 300A FP MCCB MP BASED (25 KA): 3 Nos.

- 180A FP MCCB MP BASED (25 KA): 2 Nos.

- 160A FP MCCB MP BASED (25 KA): 1 Nos.

- 80A FP MCCB TH BASED (25 KA): 3 Nos.

- 63A FP MCCB TH BASED (25 KA): 1 Nos.

Design, Supplying, installing, testing of factory fabricated ready made Three

phase APFC Panel Cubical Panel fabrication should be type tested as per IEC

61921, 61439:1&2 Capacitor Duty Contactor for switching as per following

Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with

OC, SC, internal earth fault protection Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault

protection,Copper tinned insulated Busbar,Cubical panel should be indoor

type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt

Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit

and Overload protection,Each step Capacitor having suitable MCB with Sc,

244.00 OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor Ea. 1.00 840,000.00

load rating),PF regulator master controller having suitable steps with LCD

display, Rs 485 Communication port, Indication LED Lamps for main

incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting,

Cable entry as per site situation,Cooling fans for panel (g) 250KVAR

Providing and erecting MAIN HVAC PANEL

• Incoming : 300 amps FP MCCB (25 KA) with following accessories: 1 Set

MCCB ON / OFF / TRIP indicating lights with control MCB’s. Under voltage

release 3 Nos. of 0-300/ 5 amps CTR digital VAF with 3 nos 300/ 5 amps,

15 VA Class 0.5 CT’s. Digital type 0-500 Volt digital voltmeter with inbuilt

selector switch & shall be protected by 2 amp TP MCB’s--Bus Bars 300amps

FP aluminium bus bars with coloured heat shrinkable insulated sleeve.

- 63A FP MCB (10 KA): 11 Nos.

- 5/15 A PLUG POINT: 5NOS.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting MAIN RECEPTACLE PANEL

• Incoming : 180 amps FP MCCB (25 KA) with following accessories: 1 Set

MCCB ON / OFF / TRIP indicating lights with control MCB’s. Under voltage

release 3 Nos. of 0-180/ 5 amps CTR digital VAF with 3 nos 180/ 5 amps,

15 VA Class 0.5 CT’s. Digital type 0-500 Volt digital voltmeter with inbuilt

selector switch & shall be protected by 2 amp TP MCB’s--Bus Bars 180amps

FP aluminium bus bars with coloured heat shrinkable insulated sleeve.

- 63A FP MCB (10 KA): 12 Nos.

- 5/15 A PLUG POINT: 5NOS.

Providing and erecting MAIN LIGHTING PANEL

• Incoming : 160 amps FP MCCB (25 KA) with following accessories: 1 Set

MCCB ON / OFF / TRIP indicating lights with control MCB’s. Under voltage

release 3 Nos. of 0-160/ 5 amps CTR digital VAF with 3 nos 160/ 5 amps,

15 VA Class 0.5 CT’s. Digital type 0-500 Volt digital voltmeter with inbuilt

selector switch & shall be protected by 2 amp TP MCB’s--Bus Bars 160amps

FP aluminium bus bars with coloured heat shrinkable insulated sleeve.

- 63A FP MCB (10 KA): 10 Nos.

- Astronomical Digital time switch : 1 No.

Providng and erecting Approved make energy meter 3 phase 4 wire

unbalanced load rating, 10A to 60 Amp. based on ASIC(Application specific

Integral Circuits) digital technology with accuracy Class - 1 , temper proof,

free from effect of external magnetic field with 3 phase indication, earth &

248.00 impulse indication, 6 digit electro mechanical impulse counter, suitable Ea. 1.00 3,150.00

work on 120 V to 300V per phase 45-55 HZ, housed in robust enclosure

with erection as directed. Cat. III

Providng and erecting Approved make single phase electronic energy meter

rating 5A/20A/40A based on ASIC (Application Specific integral circuit)

digital technology with accuracy Class-I, temper proof, free from effect of

external magnetic field with phase, earth, reverse and impulse indications,

249.00 digit electro-mechanical counter suitable to work on 120 V to 300V, 45 - 55 Ea. 1.00 2,030.00

Hz., housed in robust enclosure complete to be erected as directed with

year replacement guarantee. Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

250.00 (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 270.00 886.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20(iv) 22-36 watts,

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

251.00 (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 170.00 2,096.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

252.00 (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 290.00 845.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20 (v) 24 watts, 12" x 12" , Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %,--CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,--LED driver efficiency > 85 % (fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

253.00 ranges of Wattage capacity of LED fittings.The Engineer incharge may select Ea. 60.00 688.00

any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20 (iii) 16-20 watts,

Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %,--CCT 3000 K to 6500K,

--Luminaire efficacy> 85 lumens/watt ,--LED driver efficiency > 85 %--(

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

254.00 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may Ea. 10.00 845.00

select any wattage capacity between the ranges shown.).

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20. (v) 24 watts, 12" x 12" , Surge-2 KV

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name --

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %--(

255.00 fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 20.00 363.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

256.00 cm. down rod erected with earthing.(Make shall be approved by Engineer in EA. 90.00 2,275.00

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge

257.00 M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with EA. 90.00 125.00

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame. 200mm

with 1350RPM. Cat-II

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

260.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have mtr 100.00 157.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(i) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non integral

suitable Driver complete cat:III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

261.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 10.00 1,129.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(I) Adjustable spot light with COB led having aluminium reflector of

following wattage (ii) 12 Watts Cat-lll

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & Fixing of LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 85 %, CCT 3000 K to 4000K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver

efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA /

262.00 SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. (fittings required Ea. 40.00 5,630.00

LM-79 & LM-80 certificates)

(C) Post Top Lantern LED fitting comprises of Copper dust finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block. IP 65. (1) 40W

SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the projector

should have auto vertical key stone correction of +/- 30 degree and Manual

Horizontal of +/-30 degree. the projector should have optical lens, throw

ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal

length 16.9mm to 20.28mm. projector should have features like AV mute

slide, quick corner and split function and should support wireless

functionality with inbuilt wifi or wifi dongle. [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen, Aspect

264.00 Ratio-4:3 [Approved by Competent Authority i.e. not Below the rank of Ea. 3.00 3,947.00

Executive Engineer ]

Providing and erecting required size HOT deep Galvanised iron strip for

265.00 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Kg. 300.00 90.00

Providing and erecting required size Copper strip for earthing of H.T. OCB /

266.00 ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg. 100.00 928.00

Providing and erecting HOT deep Galvanised iron strip wire 8 to

267.00 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 300.00 90.00

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable

268.00 for safe earthing device. Ea. 10.00 825.00

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V(c) For Electrical Installation covering Transformer

269.00 Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer Ea. 4.00 8,288.00

System(like Automation, SCADA) i.e independent Earthing in normal soil.

[B] For Electrical installation up to 11 KV located in other than normal soil

i.e. Soft Rock, Marshy Soil etc.--Length of Pipe : 2 mtr -Back filling

Compound :1 no. Bag of 25 Kg.

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in normal soil.

[A] For electrical installation up to 440 V, Length of Pipe - 1 Mtr, Back filling

compound - 1 Nos. of Bag of 15 Kgs.

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V

[C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System (like Automation,

SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3 mtrs Back

filling Compound: 2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in existing

272.00 pipe as per direction. [C] CAT - 6 Mtr. 6000.00 51.00

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge (19) Modular Indicating Call Bell.Cat.III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge

(20) Modular Buzzer.Cat.III

8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of

275.00 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES attached Ea. 1.00 1,460,178.00

herewith. Prem. Cat.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

276.00 clamps or in existing trench / pipe of following size of cables (B) 4 core 6 Mtr. 50.00 143.00

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water

cooled diesel engine with multi-cylinders developing suitable BHP not less

than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air

filler, lubricating oil pressure gauge, end exhaust manifold, standard set of

tools with adjustable spanners, screw drivers, cylinder head to cover, joint

cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer and vertical hot air duct both logged with

asbestos rope, save oil trays, exhaust piping of required length, standard

wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase,

0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

277.00 with voltage regulation +/- 5% of rated voltage from no load to full load. set 1.00 1,487,600.00

Both the engine and alternator fitted on a common fabricated steel base

plate with antivibration mounting engine and alternator both connected to

each other by flexible flange coupling and with floor/wall mounted control

panel box comprising of voltmeter ammeter, selector switches, ACB /

MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC

fuses. The alternator & control panel shall be connected with provided

suitable capacity armoured cable and complete with Acoustic enclosure

(canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of

40 Density - at least 40 mm. The resin bonded rockwool covered from

inside the canopy by perforated sheet with 3/4 mm holes, sound level not

more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection,

commissioning and satisfactory testing as per requirement with first filling

of fuel, oil, etc. with guarantee / Warrantee of complete system for Two

years. & with obtaining all necessary certificate from Electrical Inspector.

The Capacity and Ratings of DG sets are as below. (Q) Continuous rating of

200 KVA ,BHP not less than 254 BHP

Providing & erecting approved make AMF control panel suitable for

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for

mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage

monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.3)

278.00 Protection module: The engine shutdown in the unlikely event of Low lube Ea. 1.00 260,200.00

oil pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery

The AMF Panel of following capacity (D) AMF Control Panel for 200 KVA/250

KVA3 phase DG Set

Supplying and erecting Acoustic enclosure (canopy) made out of 18 SWG,

CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm

thick conforming to IS:8183 The resin bonded Rockwool / PU FOAM covered

from inside level not more than 75 dB at a distance of 1 mtr, as PVCT norms

, on provided foundation suitable for following size of DG Set. The

enclosures for following capacity of DG sets. (E) For for 160/180/200/250

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of

cables. (F) 3 1/2 core 120 Sq. mm (70 Sq. mm 1/2 core)

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

281.00 with out going tails, insulating tape etc for following size of cables.(E) 3 & Ea. 4.00 163.00

1/2 core 120 Sq. mm

Supplying, installing, testing, and commissioning of three-phase servo-

controlled automatic voltage stabilizer, rated for 250 kVA, suitable for input

voltage range 300–480V AC, 3-phase, 4-wire, 50 Hz, with a regulated

output voltage of 415V ±3%, featuring step-less correction, digital display

for voltage/current, manual bypass switch, forced air cooling, and complete

protection against over-voltage, under-voltage, overload, short-circuit, and

282.00 time-delay start-up, mounted in an IP42 enclosure with terminal Ea. 1.00 465,000.00

connections, all wiring, and commissioning as per manufacturer guidelines

and relevant IEC standards, including stabilization efficiency not less than

97% at full load.

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports Advanced L2 switching and security features

L2+ Static Routing Optional “standard mode” or “surveillance mode”

management user interface 65W PoE budget [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

284.00 [Approved by Competent Authority i.e. not Below the rank of Executive Ea. 8.00 4,400.57

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U'

285.00 Snag less [Approved by Competent Authority i.e. not Below the rank of Ea. 120.00 200.99

Executive Engineer ]

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output

230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage

286.00 output with over load & short circuit protection equipment. The system Ea. 4.00 29,616.23

housed in CRC sheet duly powder coated paint with following power

backup.with MS painted batteries stand, 10% Overload capacity for

momentary load.(A) 1 KVA with 1Hr Backup

SITC of 9U Network Rack for Network switch, Jack panel consisting of mains

287.00 panel, fan tray for ventilation, power distribution, cable channel etc as Ea. 8.00 14,645.00

Supply, Installation, Testing & Commissioning of Indoor / Outdoor

MP IP Dome Camera of 1/2.8" Progressive CMOS Sensor with

resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3- 9 mm Field of

View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30 Mtr Smart IR Min.

Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise

Reduction ; Compression Technology H.265, H.264, MJPEG with

288.00 simultaneous streams ; S/N Ratio 51.5 dB Dynamic Range 110 dB Ea. 20.00 24,997.50

WDR; two way Audio ; on board SD/SDHC/SDXC card slot ; P-iris Lens &

Digital Image Stabilization ; ONVIF IP43, CE, FCC Class A, UL listed with

all required accessories.

Supply, Installation, Testing & Commissioning of Indoor / Outdoor

MP IP Bullet Camera of 1/2.8" Progressive CMOS Sensor with Night Vision

and with resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3-

mm Field of View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30/50

Mtr Smart IR Min. Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4

(B/W) 3D Noise Reduction ; Compression Technology H.265, H.264,

MJPEG with 3 simultaneous streams ; S/N Ratio 51.5 dB Dynamic

Range 110 dB WDR; two way Audio ; on board

SD/SDHC/SDXC card slot ; P-iris Lens & Digital Image Stabilization ;

ONVIF IP66, IK10, CE, FCC Class A, UL listed with all required

Supply, Installation, Testing and Commissioning of 8TB Surveillance

290.00 HDD recording storage Ea. 2.00 29,452.61

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, Testing and Commissioning of 55'' Full HD

291.00 Resolution Output Display with 2 Port HDMI-VGA-Wall Mount Stand And Ea. 1.00 84,935.95

Supply, Installation, Testing and Commissioning of Network Video

Recorder with maximum 64 IP Cameras, up-to 6 HDD slots,

simultaneous 1/4/9/16 channels playback and H.265+ / H.265 / H.264

recording supported. (FOR CONNECTING ALL THE IP CAMERA)

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

293.00 LED Meter :5 LED Arrays Ea. 4.00 11,298.87

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by

wrong Battery Polarity connections. [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

Supplying and erecting Weather & Dust resistant sound column with

Aluminium case & Aluminium mesh grille with foam layer under grill, rotary-

switch for selecting power taps / impedance having frequency response

150-20000 Hz with following specifications . [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ] (a) With 4 speakers,

294.00 capacity of power handling 45W (MAX) & 30 W RMS, each speaker have Ea. 25.00 2,055.35

impedance of respectively 300 ohms / 30 W, 500ohms/20W,I -K.ohms/10

W, 2K. ohms / 5W.

Supplying and erecting Weather & Dust resistant sound column with

Aluminium case & Aluminium mesh grille with foam layer under grill, rotary-

switch for selecting power taps / impedance having frequency response

150-20000 Hz with following specifications . [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ] (b) With 2 speakers

295.00 having power handling capacity of 23W(MAX) & 15 W (RMS), each speaker Ea. 5.00 1,370.57

have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms /

5W & 4 K. ohms / 2.5W.

Supplying, Installing & testing approved make highly sensitive microphone

capable to pick up weak sound from longer distance & wider area suitable

for stage shows, group singing with frequency response 50 - 16000 Hz.

Having sensitivity of 1.6MV / Pa & impedance 250 ohms (Lo -Z),

296.00 Supplied with quick detachable holder & 10 mtr. twin core cable & 3 pin XLR Ea. 2.00 2,740.13

connector. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

297.00 water tank surrounded by evaporating, coil, thermostats, relay etc.complete Ea. 3.00 54,500.00

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel.

Liaisoning work for additional load for requirement, electrical power

298.00 connection charges and inspector approval for power(to be paid to concern Job 1.00 25,000.00

electrical power supplier company)

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, Loading/Unloading of Variable Refrigerant Flow System

Top Discharge Out-door units :- VRV outdoor units with following multiple

inverter based scroll type compressors electronic expansion valve R410A

eco friendly green refrigerant cooling & heating mode both option ,special

pre coated fin type heat exchanger, low noise direct driven propeller

condenser fans in each module with top discharge including internal wiring

,microprocessor ,controls ,safety . the condensing unit should be capable of

providing cooling between +5°C to 52°C. COP should not be less than 2.7 @

40⁰C Ambient temperature @ 100%. Also machine should be BMS

ODU capacity to be offered considering the Deration @40⁰C Ambient

VRF/VRV Indoor AC Unit : Supply installation testing and commissioning of

INDOOR unit comprising of copper evaporator, electronic expansion valve,

blower, motor, filter pad, auto air swing louvers, temperature & ON/OFF

300.00 display with inbuilt drain pump, including internal wiring, controls, Panal - 0.00 0.00

etc. (Single phase/Three phase)

300.00 4 Way Cassette - 0.00 0.00

300.70 Special Purpose Ref Joints (Supplied from OEM) Nos 69.00 4,300.00

300.80 Remote Controller - 0.00 0.00

300.90 Wireless Nos 69.00 1,900.00

Touch Screen Central Control System with BMS Compatibility & Required

304.10 Software for integration (CRC) Set 1.00 90,000.00

SITC of Hard Copper refrigerant piping of required sizes for pair of gas

(suction) & liquid), with 19 mm Closed Cell Nitrile Class O Insulation

material.Piping inside building should be taken in Sprinkler type U-Clamps

with EPDM Rubber Coverings. PVC Covers to be placed at each Clamp

location & all crossings.

GI Cable Tray With Cover for Exposed Ref. Piping (200mm*150mm*1.6mm)

CONTROL CABLING : Supply,installation,testing and commissioning of

control cum transmission wiring of 2 core x 1.5 sqmm copper sealded cable

303.00 in suitable PVC conduits between indoor and out door unit & outdoor units RMT 1500.00 350.00

to central remotes controllers.

PVC Drain piping for the units with 9 mm thick nitrile rubber insulation With

304.00 duly epoxy coated black painted clamped as per specifications . RMT 600.00 230.00

Supply & Installation of Modular Support system for ODU Placement at

305.00 Terrace level Set 5.00 40,250.00

Testing & Commissioning charges along with topping-up of refrigerant as

306.00 per specifications. Lot 1.00 330,000.00

Supply, installation, testing and commissioning of split type wall mounted

air conditioning unit of following capacity including indoor ,outdoor unit

fitted with inverter based rotary compressor , copper condenser and first

charge refrigerant R410A or equivalent . the condensing unit working range

307.00 should be capable for providing cooling between +/- 5deg c to 50 deg.c. - 0.00 0.00

including cordless remote control , auto air swing louvers. outdoor /indoor

units should be same make (brand) (Min. 3 star rating)

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

308.00 Supply & Installation of Haevy guage NON-VRF Copper piping - 0.00 0.00

Seamless heavy gauge Copper piping of sizes as per OEM Recommendation

duly insulated with 9/13 mm thk. Nitrile Rubber Insulation(As per Specified

with KValue of 0.027-0.029 KCal/Hr.M Deg Cat0-16DegC). All necessary

supports, fittings where ever required will be included.

Note:-Mentioned RMT is considered for single line(For both Liquid+Suction).

0.00 Vendor need to consider the qty as per drawing accordingly - 0.00 0.00

308.10 Upto 2 TR DX Units Rmt 300.00 1,075.00

308.20 Cable Tray With GI Cover for Exposed piping (100*100*1.6mm) Rmt 5.00 750.00

Supply,installation,testing and commissioning of control cum transmission

308.30 wiring of 4 core x 1.5 sqmm copper cable in suitable PVC conduits between Rmt 360.00 135.00

indoor and out door unit

Supply & Installation of Modular Support system for ODU Placement at

308.40 Ground level. Set 14.00 2,500.00

PVC Drain piping for the units with 9mm thick nitrile rubber insulation with

308.50 GC and duly epoxy coated Black painted clamped as per specifications Rmt 20.00 135.00

Nitrogen Pressure testing & Refrigerant Gas top Up (as per OEM

308.60 recommendation & as per piping length). Nos 12.00 1,600.00

Total Amount Rs. =

Total Amount Rs. =

Rupees Tweleve Crore Fifty Two lakh Thirty Thousand Six Hundred Fourty Four and zero paisa.

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal