Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.0 Cr
EMD Value
₹7.0 L
Closing Date
21 Nov 2026, 6:10 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Sabarkantha Irrigation Division, Himatnagar
CONSTRUCTION OF DIVISION OFFICE, SUB DIVISION OFFICE, RECORD ROOMS,CONFERENCE HALL, REST ROOM, LANDSCAPING WORK ETC OF SABARKANTHA IRRIGATION DIVISION, HIMATNAGAR
363540
Tender Notice No 18 of 2026-27
Open
Civil Works
Works
Sabarkantha
14 documents required · 11 mandatory · 3 optional
₹12,000
Executive Engineer Sabarkantha Irrigation Division Himatnagar
₹7.0 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
21 Nov 2026
7 Nov 2026
120 days
NAME OF WORK:- CONSTRUCTION OF DIVISION OFFICE, SUB DIVISION OFFICE, RECORD ROOMS, CONFERENCE HALL, REST ROOM, LANDSCAPING WORK ETC OF SABARKANTHA IRRIGATION
BILL OF QUANTITIES
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter
lead.(A) Loose or soft soil
Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer
by ramming and watering.
4 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 439.00 481.81 CUM
Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of
5 formwork in (A) Foundation and Plinth : 150 thk. M10 PCC Below Foundation. 108.00 3095.25 CUM
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of
6 formwork in (A)Foundation and Plinth : 150 THK. M15 PCC : GRADE SLAB AT GROUND FLOOR AT PLINTH LEVEL 119.00 3757.70 CUM
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A)
7 Foundations, footings, Base of columns and Mass concrete. M25 Cocncrete in Foundation 163.00 4345.80 CUM
Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement
for R.C.C. work in (B) COLUMNS: (iii) Having cross-sectional area more than 0.12Sq.M and upto
Sq.M M25 Cocncrete in Column Upto Floor Two Level
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B)
9 Walls, from top of foundation level upto floor two level : M25 Cocncrete in Shear Wall for Lift Upto Floor Two Level 22.00 4655.93 CUM
Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement
for R.C.C. work in (A) BEAMS :(iii) Having cross-sectional area more than 0.12Sq.M and upto 0.18 Sq.M M25 Cocncrete in BEAMS :
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. 150 Thk M25 RCC Slab
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in
Staircases upto floor two level : STAIRCASE
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. 150 Thk M25 RCC CHAJJAS, LINTELS, SILL
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete including cost of
formwork in (A) Wall Caps / Coping
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. TOP SLAB OF UNDERGROUND WATER TANK
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B)
Walls, from top of foundation level upto floor two level UNDER GROUND WATER TANK SIDE WALLS & PARTITION WALLS
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and
centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced
17 concrete and plain concrete work in. (B) Flat surfaces 1806.00 265.50 Sq.Mt.
such as soffits of supspened floors slabs Landings and
the like. (1) Floors etc. upto 200 mm in thickness. SLAB FORM WORK & Shuttering
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and
centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface
such as walls (any thickness) partitions and the like
including attached buttresses & string course & the like. WATER TANK WALLS AND SHEAR WALL : FORM WORK & Shuttering
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement :
5 -fine sand)(B) Conventional Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement :
5 -fine sand)(B) ConventionalExtra for brick work in superstructure above floor two level Item No. 1(6.12) (B) Conventional
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level HYSD FE-500D
21 REINFORCEMENT 179091.00 77.28 kg
Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in
cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including
scaffolding curing etc. complete.
Providing Safety Grill, Supply of M.S. Steel as per design, Fabrication, Installation with all necessary accessories over the courtyard of the main building as per
instruction of EIC. With Roof of M.S Sheet Or PVC Sheet or as per instruction of EIC
Providing and laying rubble for appron (each stone weightingnot less than 40Kg.) including and packing and filing in the interestices with quarry-spalls.
Carry out soil investigation at minimum one location within the building area using rotary/percussion boring up to 10.0 m depth. Conduct Standard Penetration Test
(SPT) as per IS 2131:1981 and collect disturbed/undisturbed samples as per IS 1892:1979. Perform laboratory tests as per IS 2720 (relevant parts) and determine Safe
25 Bearing Capacity (SBC) in accordance with IS 6403:1981. If SBC is lower than that in structural drawings, contractor must consult structural engineer before 10.00 3535.00 RMT
proceeding. If SBC is higher, execution shall proceed after engineer’s confirmation.
P & L 600 x 1200 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing
26 flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the 265.00 1311.19 Sqm
surface etc. complete for light shade. Material and procedure of application shall be approved by EIC.
Providing and laying Leather Finish Multi Color Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6(1-cement : 6-coarse sand) or L.M. 1.1.5
27 (1-Lime putty:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. 91.00 1464.50 Sqm
complete. (A) 25mm thick
Providing and laying Polished Finish Green Color Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6(1-cement : 6-coarse sand) or L.M.
28 1.1.5 (1-Lime putty:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. 714.00 1363.50 Sqm
complete. (A) 25mm thick
Providing and laying Leather Finish Green Color Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6(1-cement : 6-coarse sand) or L.M.
29 1.1.5 (1-Lime putty:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. 536.00 1414.00 Sqm
complete. (A) 25mm thick
Providing and laying polished Granite stone slab 25 mm thick for stair steps and riser as per design incl. full moulded round front edge in trade of steps laid on 20 mm
thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing etc. complete. as per approved by EIC
Providing and laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm thick cement mortar 1:4 ( 1 Cement : 4 coarse Snd ) with nessary adhesive
31 material and finished with flush pointingin white or colour cement, Including eubbing & Polishing comp. Material and procedure of application shall be approved by 194.00 2313.10 Sqm
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Providing and laying broken chine mosaic flooring including heavy duty water proofing for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be
laid over cement mortar 1:3 admixed with " DR FIXIT LW + " or equivalent after laying 3 coats of " DR FIXIT NEW COAT " or equvalent to plain or slope and to
be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing
with water and oxalic acid etc. as directed
Providing and applying an architectural exposed concrete texture finish over ceiling surfaces at all heights.The scope includes surface preparation, application of a high-
33 adhesion primer, and multi-layer texture troweling. Artisans will finish the surface to achieve a seamless, natural "cloudy" raw industrial concrete pattern. The final 877.00 1818.00 Sqm
surface will be sealed with clear matte protective polyurethane (PU) sealer complete per sqm.
Providing and fixing PVC Printed pain colour false ceiling with grid type with alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used as
panel insert in a frame work made using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x
34 600mm) The alluminium frame work is supported from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper level 71.00 773.66 Sqm
etc. The aluminium frame work is supported on side wall with the use of alluminium L section of size 1 x 1 (25 x 25mm) angles etc. complete as per direction of Engineer
in charge. Manufactures specification and drawing. Material and procedure of application shall be approved by EIC.
Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement mixed with water proofing compound conforming to IS. 2645 over the RCC slab including adjoining
walls upto 300mm height. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse
sand) mixed with water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) mixed with water
proofing compound conforming to IS : 2645 to required slope
35 and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second 922.00 833.68 Sqm
coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645. Finishing the surface with 20 mm thick jointless
cement mortar of mix 1:4 (1 cement :4 coarse sand) mixed with water proofing compound conforming to IS : 2645 including laying glass fibre cloth of approved quality
in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. The whole terrace so
finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order:
Providing and fixing 35 mm thick fully paneled shutters for doors, windows, and clerestory windows, including Indian teak wood frames of size 10 cm x 7 cm, with
black enamelled oxidized iron fixtures and fastenings such as handles, hinges, tower bolts, stoppers, and locks. The work includes a primer coat of approved quality and
two coats of oil-based paint for a smooth and durable finish. All materials, including door accessories, shall be of premium quality, and the material and procedure of
application shall be approved by the Engineer-in-Charge (EIC) to ensure compliance with quality standards.
Providing and fixing 30mm thick FACTORY MADESOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of
gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer of approved makde and manufactures. M.S
frame covered with 5mm thick heat moulded prelim PVC ‘C’ channel of siz 30mm thickness, 70 mm width of which 50mm shall be flat and 20mm shall be tapered in
degree Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the
inner side ot form top and bottom rail and 115mm wide prelim PVc sheet out of which 75nmm shall be flat and 20mm shall be tapered on both side to form lock rail,
Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail and
bottom rails. Panelling of 5mm thck both side prelim
PVC sheet to be fitted in the M.S.frame welded,sealed to the stiles and rails with 7mm (5mm + 2 mm) thick x 15mm wide PVC sheet beading on inner side, and joined
together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C” chanel using PVC solvent
adhesive etc. complete as per Instruction of EIC.
Providing and fixing extruded aluminum window having extruded aluminum Colour Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm, @
Wt. 1.384 Kg/mt, horizontal Three track member size 122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt, vertical member of size 122.20mm x 31.75mm x 1.50mm, @
Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt. of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.
of 0.456 Kg/mt, fitted with 5 mm thick transparent bronze colour tinted float glass. One shutter will be provided with a mosquito net, made of high-quality rust-
resistant mesh and powder-coated aluminum frame. The window will include powder-coated aluminum fittings and fixtures, and transparent silicon sealant will be
used for fixing the glass to the frame as per details, etc., complete for the window.
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with
39 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation 6.00 1290.82 Sqm
with 5 mm thick frosted glass as details etc complete for.window
Blackout Circle Roller Blinds for Windows- Room Darkening Blinds for Home Office, Brown Mount Types- Inside Mount (Blind Width = Window Width - 0.5 cm)
Outside Mount (Blind Width = Window Width + 10 cm (or more for better coverage)) The shade width is for total roller width including hardware, not for fabric
width. Fabric is about 3.5 cm less than shade width because there is mounting hardware on each side which takes about 1.7 cm space on both sides. Material , Design
etc shall be approved by EIC
Providing premium ergonomic office chairs equipped with patented Smart Grid Technology and adjustable lumbar support, designed for desk use. The chairs shall be
41 manufactured using approved make, style, materials, and design, as specified and approved by the Engineer-in-Charge (EIC), ensuring superior comfort, durability, 37.00 12120.00 Nos
and functionality.
Supply and installation of Visitors Chairs with mid-back support, fixed non-tilting design, robust construction, and ergonomic features. These chairs should be
designed for high-usage environments and offer comfort and durability. The Design and colour approved by engineer in charge.
Providing wooden dining chairs with soft cushioned seats upholstered in leatherette fabric, designed and manufactured as per the approved make, style, materials, and
design, as specified and approved by the Engineer-in-Charge (EIC).
Designing,Providing & fixing Office tables of different size as per approved drawing size of height of 0.75m including 12 mm molded edge glass made of 19 mm thick
all proof plywood of BWR confirming to IS 710 of green or century or equivalent make, designs & grooves as directed by architectural drawings including minimum
three drawers with Lamination of 1.0 mm thick in single or double or approved shade of green, broom,royal touch or equivalent make of plain or texture finish as
directed on all visible face, 0.80 mm white lamination on all non visible faces including polish or lamination on teck wood batten patti . Hettich or equivalent make
telescopic sliding channel, Enox or equivalent make S.S. sliding rail, S.S. Decorative handle, Ebco or equivelent make Keyboard tray with necessary fixtures &
fasteners,cable passing arrangement of standard make as per detail drawing and image also including all labours as approved by engineer-in-charge etc. complete.
Designing ,Providing & Supplying Wooden sofa Three Seated SOFA made using Indian Teak wood in framing and support of 19mm thick WP plywood, box of the sofa
made with 100mm Thick High Density 'U' foam in seat and 50mm Thick High Density 'U' foam in back rest portion with imported POLYTEEL recron covering on
back portion as approved by engineer in charge and S.S. legs with necessary fixtures & fastening etc., completed as per detailed drawing & image and directed by the
Architect and approved by the Engineer in Charge. (3 seater Sofa)
Designing ,Providing & Supplying Wooden sofa Three Seated SOFA made using Indian Teak wood in framing and support of 19mm thick WP plywood, box of the sofa
made with 100mm Thick High Density 'U' foam in seat and 50mm Thick High Density 'U' foam in back rest portion with imported POLYTEEL recron covering on
back portion as approved by engineer in charge and S.S. legs with necessary fixtures & fastening etc., completed as per detailed drawing & image and directed by the
Architect and approved by the Engineer in Charge. (2 seater Sofa)
KITCHEN STORAGE BELOW PLATFORM: Providing and Making of STORAGE BELOW PLATFORM (AS PER DRAWINGS) using ply of brand of
brand greenply, century or anchor company with lifetime warranty etc,(thickness as specified) & TEAK wood beading patti and finished by 1.3 mm
47 UNICORE LAMINATEof brand formica, greenlam (outside), 1mm tk laminate greenlam, merinolam, formica (inside) with both side laminated (inside) 7.00 20171.58 Sq.Mt.
shelves with profile handle of brand enox as per architect's selection with all hardware and other acessories with all material, labour, lead and wastage etc.
and complete the work satisfactorily as per drawing & instruction of architect (Basic Inside Laminate : STORAGE LENGTH 750mm High and 600mm DEEp
Designing,Providing and fixing storage cabinet of size 0.60 mt overall depth as directed as per architect drawing including 25 mm shutter of green or century or
equevalent make of BWR confirming to IS 710 including drawer, shutters & minium 4 nos of shelves as per drawing as directed including fixing approved colour
48 lamination of 1.0 mm thick of greenlam,merino,royal touche or century or signature or equivalent brand make to exposed surfaces & 0.80 mm thick white laminations 24.00 27198.29 Unit
inside of drawer & shutters including SS accessories, kadakka lock, , Ghana teakwood beading melamine polish to exposed faces grooves & design as per architect
drawing for all lead and lift etc. complete.FOR 1.125X2.4X0.6 MT. CUPBOARD
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Designing,Providing and fixing storage cabinet of size 0.40 mt overall depth as directed as per architect drawing including 25 mm shutter of green or century or
equevalent make of BWR confirming to IS 710 including drawer, shutters & minium 4 nos of shelves as per drawing as directed including fixing approved colour
49 lamination of 1.0 mm thick of greenlam,merino,royal touche or century or signature or equivalent brand make to exposed surfaces & 0.80 mm thick white laminations 12.00 23501.69 Unit
inside of drawer & shutters including SS accessories, kadakka lock, , Ghana teakwood beading melamine polish to exposed faces grooves & design as per architect
drawing for all lead and lift etc. complete. (FOR 1.125X2.4X0.4 MT. CUPBOARD)
Desigining, Providing and fixing low height of 0.75m storage cabinet of size as directed as per architect drawing of 0.45 mt. depth including 19 mm plywood shutter of
green or century make of BWR confirming to IS 710 including drawer, shutters & shelves as per drawing as directed including fixing approved colour lamination of
mm thick of green or bloom make to exposed surfaces & 0.80 mm thick white laminations inside of shutters including SS accessories, Godrej lock, telescopic channel of
Hettich, sleek or efficient make, Ghana teakwood beading melamine polish to exposed faces grooves & design as per architect drawing for all lead and lift etc. complete.
51 Providing and Fixing Pinboards on 12 mm plywood using approved fabric. Material approved by EIC 19.00 1010.00 SQM
Providing and fixing hanging profile shutters 1.125m Long, 0.4m Deep, 0.6m High, as per the approved design. The shutters shall have glass panels of the specified
thickness, with shades and colors as approved. The profile frame shall be made of high-quality aluminum, and the support box shall be constructed using 19mm thick
plywood of approved quality, laminated on both surfaces, as specified and approved by the Engineer-in-Charge (EIC). Additionally Providing and fixing low height
storage as per Architectural detail drawings and as per EIC ((Hanging Profile + Low height Storage))
Designing,Providing & fixing Meeting and Conference Hall Desk of different size as per approved drawing size of height of 0.75m including 12 mm molded edge glass
made of 19 mm thick all proof plywood of BWR confirming to IS 710 of green or century or equivalent make, designs & grooves as directed by architectural drawings
with Lamination of 1.0 mm thick in single or double or approved shade of green, broom,royal touch or equivalent make of plain or texture finish as directed on all
visible face, 0.80 mm white lamination on all non visible faces including polish or lamination on teck wood batten patti . fixtures & fasteners,cable passing
arrangement of standard make as per detail drawing and image also including facilities for Speaker, Mics etc. Facilties at every seat of table as approved by engineer-in-
charge etc. complete. (Desk Table for conference and Meeting : For Area Detil Drg Shall be reffered)
Designing,Providing & fixing Office tables of different size as per approved drawing size of height of 0.75m including 12 mm molded edge glass made of 19 mm thick
all proof plywood of BWR confirming to IS 710 of green or century or equivalent make, designs & grooves as directed by architectural drawings including minimum
three drawers with Lamination of 1.0 mm thick in single or double or approved shade of green, broom,royal touch or equivalent make of plain or texture finish as
54 directed on all visible face, 0.80 mm white lamination on all non visible faces including polish or lamination on teck wood batten patti . Hettich or equivalent make 6.00 27903.45 SQM
telescopic sliding channel, Enox or equivalent make S.S. sliding rail, S.S. Decorative handle, Ebco or equivelent make Keyboard tray with necessary fixtures &
fasteners,cable passing arrangement of standard make as per detail drawing and image also including all labours as approved by engineer-in-charge etc. complete. Use
Veneer at top of the Table and PU for Other Finishes. Materia and procedure shall be approved by EIC
Providing and Fixing in position 1.35 meter height partition of 65mm Thickness with 50X25mm batten in Border and provide both side with 1.0mm thickness laminates
and provide border of 65mm on the edge of wooden partition or as per the instruction of engineer incharge
Providing, Fixing and installing Mobile sliding Rack storage system having minimum dimension 2500mm x 450mm x 1980mm having minimum 5 Nos. of shelves, with
each shelf having capacity of 150 kg per shelf. The design should be approved by EIC
Semi LAWN Carpet : Area cleaning and side grading, removing unwanted materials, plants, chrubs,wild grass, weeds,debris,rubbish,etc. Excavating up to depth
C.M surface dressing leveling, making slopes for drainage according to landscape, Disposal of unwanted materials with all labour and tools. Development of lawn
57 including preparation of bed ground, spreading and mixing the good soil with Farm Yard Manure, Gypsum, fertilizer soil with farm Yard Manure, Gypsum, Fertilizer 118.00 277.75 SQM
bas required hand specified. Planting of lawn grass bits roots of approved quality, watering and specified. Planting of lawn grass bits roots of approved quality,
watering, and specified. Planting of lawn grass watering mowing, weeding etc. maintenance of developed lawn for a period of 6 months.
Providing and applying Plaster of Paris (PoP) putty over plastered wall surfaces, including scaffolding, is done to create an even and smooth finish, followed by wall
painting using high-quality paint such as Asian Paints, Berger Paints, or Dulux. The PoP putty is applied up to a Avg 1 mm thickness to ensure a level and smooth
surface, and once dried, the wall is painted in 3 coats using brushes, rollers, or spray equipment to achieve a uniform, durable, and aesthetically pleasing finish. The
entire process ensures both longevity and a professional visual appeal. colour as per approved by EIC
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
The elevation painting work includes surface preparation, application of a high-quality Damp Proof and primer coat (such as Asian Paints or equivalent) to ensure
proper adhesion and durability, followed by a base coat using premium-grade exterior emulsion paint (from brands like Asian Paints, Berger, or Nerolac) for a smooth
59 and vibrant finish in 3 coats. The work also involves applying textured finishes as per the approved design and specifications. The selection of colors and textures is 300.00 969.60 SQM
finalized by the executive engineer to ensure alignment with the project’s aesthetic and functional requirements. All materials used are of standard quality, ensuring
long-lasting protection and superior appearance.
Applying and installation of exterior Brick Cladding work for Natural Asthetic lookusing More than 20mm thick approved size, shape and colour shade . Brick tile
shall be installed using approved all weather adhesive and joint or groove shall be filled by approved quality and shade of material. As directed by EIC
Providing and applying paint over ceiling surfaces, including necessary surface preparation and scaffolding, is done to achieve a uniform and smooth finish. The
surface is first made smooth to ensure proper adhesion of the paint. High-quality white paint, such as those from Asian Paints, Berger Paints, or Dulux, is applied in
multiple coats using brushes, rollers, or spray equipment. This process ensures a durable, professional, and aesthetically pleasing finish for the ceiling. as per approved
The scope of work includes the supply and installation of high-quality aluminium fins for exterior cladding, providing aesthetic appeal, shading, and improved energy
efficiency. The aluminium fins are made of powder-coated, corrosion-resistant material and will be fixed vertically or horizontally to the exterior wall using brackets or
anchors. Each fin has a typical section size of 50 mm width and 2 mm thickness. The arrangement and alignment of the fins shall be as per the architect's elevation and
finalized by the engineer in charge.
Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer all complete as per the structural designs and
directions of Engineer in charge.Column ( 122 x 61 x 3.6mm ) : Providing & Fixing M.S Grill ladders etc. as per approved size and shape by EIC (Fabrication work (
Steel 32.28 kg per Sqm. ) total 5.04 Sqm)
The proposed canopy structure measures 9.29m x 6.23m with a depth of 0.915m, constructed using structural steel for the framework. The top is covered with
Sqm of corrugated sheet, providing protection against environmental factors. The cladding comprises Aluminum Composite Panels (ACP), covering 77.77 Sqm on the
64 canopy and 10.152 Sqm on the columns, offering a sleek and durable finish. The project involves material procurement, fabrication, welding, and painting of steel, 1.00 825186.16 Nos
installation of ACP sheets with an aluminum framework, and fixing the corrugated sheets using accessories. This rate analysis includes all material, labor, and
installation costs, providing a detailed breakdown of expenses.
Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe
1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square
65 bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the 31.00 2913.85 RMT
work including bending hand rail pipe to proper shape in curves with specials etc. complete (Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor
Mittal). Railing height is 1 M.
66 Providing and Fixing Roller Mosquito net for External Window Complete as per Engineer incharge. 152.00 2251.29 SQM
This 08-passenger elevator is designed to efficiently service a ground floor to second floor (G+2) building with a travel distance of 11 meters. It features a variable
voltage variable frequency (V3F) control system, ensuring smooth and energy-efficient operation at a speed of 1.5 meters per second. The lift has a capacity of 544 kg
and is equipped with center-opening power doors, both at the car and landing, finished in stainless steel hairline. The car dimensions are 1100 mm wide x 1300 mm
deep, with PVC antiskid flooring and a fluorescent light and fan for passenger comfort. The machine room is located at the top of the shaft, with a pit depth of 1350 mm
and a headroom of 4500 mm. The lift operates with simplex selective-collective control, allowing for efficient, attendant-free operation. With indicators for both the car
and landing, and a modern microprocessor-based control system, this elevator offers reliable performance for multi-story buildings. The estimated cost for such an
installation is approximately ₹1,650,000. Leading companies like KONE, Mitsubishi, and Schindler offer similar lifts, providing competitive solutions with varying
features and after-sales service options.
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi strand
copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected
68 on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, 223.00 530.25 Pt.
with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete,
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories
69 with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules 40.00 742.35 Pt.
erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.,(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi strand copper wires
up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate
front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.,[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board,(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete,Cat. III
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.,(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete,Cat. III
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with
textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories,Cat. III
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade ZHFR/HRFR PVC
insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden
box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle
holder or ceiling rose or H.D.Connector as directed,(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.,Cat. III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white
74.1 front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket, [A] For One Gang, 35.00 179.78 Nos
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white
front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(8) Computer RJ-45 socket ,Cat.III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white
74.3 front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit 5.00 559.54 Nos
Complete, Cat.III
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from
seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by engineer-incharge and laying/erecting as per OEM
guidelines and as per instruction of engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-III,[4] 225mm x 25mm x 1.6 mm
with Three Compartment
Providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected
76.1 concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor ZHFR/HRFR PVC insulated stranded wire of green colour for earth continuity of following 1165.00 90.90 Mtr.
size ,(A) With medium class Rigid PVC pipe and accessories,(c) 3 wire 1.5 sq. mm
Providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected
76.2 concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor ZHFR/HRFR PVC insulated stranded wire of green colour for earth continuity of following 987.00 113.12 Mtr.
size ,(A) With medium class Rigid PVC pipe and accessories,(d) 3 wire 2.5 sq. mm
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with ZHFR/HRFR PVC tape &
77 sheathed with ZHFR/HRFR PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors 1054.00 21.21 Mtr.
& nos.of pairs. With necessary connections.,[A] Conductor Size 0.5 mm (a) Unarmoured(2) Two Pairs
78 Providing & Erecting 6 core fibre optic SM 9/125um double sheath, CSTA, Unitube, Outdoor cable (per m) 120.00 67.67 Rmtr.
Providing the Street Light in the entire Premises as per the locations shown in the drawings and the as per the description in the rate analysis and as per the instruction
Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5,(A) LED Lamps integral type, with PC diffuser suitable LAMP holder
, (iii) 10 to 15 watts,Cat-III
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5,(A) LED Lamps integral type, with PC diffuser suitable LAMP holder
, (iii) 10 to 15 watts,Cat-III
(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20,(i)up to 8 Watts,4" x 4", Surge-2 KV,Cat-lll
Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5,(A) LED Lamps integral type, with PC diffuser suitable LAMP holder
, (iii) 10 to 15 watts,Cat-III
(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20,(iv) 18 to 20 watts, 8" x 8", Surge- 2 KV,Cat-lll
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A.
81 with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 1.00 9504.10 Nos
G.M.S. housing. ICS=100% of ICU only Cat III
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with ISI Mark ,Cat.III
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having
following capacity ,(a) 6 to 32 Amp., Cat.III
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having
following capacity , (c)63 Amp. Cat.III
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms
84.1 to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) 3.00 1759.42 No's
single phase incoming and horizontal single phase outgoing,(iv)12 way
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A)
single phase incoming and horizontal single phase outgoing,(iv)12 way,(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type
(PPI), (b) sheet steel double door, (i) 4 way
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A)
single phase incoming and horizontal single phase outgoing,(iv)12 way,(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type
(PPI), (b) sheet steel double door, (iii)8 way
Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with copper insulated
85 busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN MCCB + RCCB as incomer and three 1.00 10902.95 No's
phase outgoing as per following .(The DBs should be used of same company of MCB to be used) ,(A)4 way outgoing
Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable
86 for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic 4.00 3585.50 No's
component for following Max. rating erected as directed.,(iii) 63 Amps. FP , Cat. III
Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as per
88 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 5.00 937.28 Kg.
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of
corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,
connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B)
89 Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- 1.00 10188.88 No's
<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. (c) For
Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent
Earthing in normal soil.
Length of Pipe : 3.00 mtrs
Back filling Compound :2 nos Bags of 25 Kg.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing
trench / pipe of following size of cables , (C) 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core)
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables,(A) 4 core 16 Sq. mm
Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement foundation as directed by
Engineer in charge.
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an approved manner
and making the ground as per original.,(E) 150 mm dia
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an approved manner. (c) 16/25 Sq.mm
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an approved manner. (c) 16/25 Sq.mm, (F) 95 Sq.mm.
Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per
95 IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - 100.00 934.25 Rmt.
bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge.,(6) 450 X 50 X 2.0 mm Thick
Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and
96 shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers 8.00 646.40 No's
etc. erected on existing support as per Specification and as per instruction of engineer in charge of following size, (6) 450 X 50 X 2.0 mm Thick
Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall
97 be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as 8.00 525.20 No's
per Specification and as per instruction of engineer in charge, (6) 450 X 50 X 2.0 mm Thick 90° Elbow
Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet
Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service
Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control
and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with
surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] ,(B)
1200 mm Sweep (48")
Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame.,250mm with 1350 RPM
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Digital EPABX system ,SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant facility,
Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from Ethernet,
public address cord, shall have unrestricted simultaneous dialing facility,
QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring device, Chairman /
100 Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call 1.00 90950.50 No's
transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting,
Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with following capacities [[Approved by
Competent Authority i.e. not Below the rank of Executive Engineer ],[C] No of Extension 48, No of Junctions 9, 8 Port IP Resource in-built, 4 Port Web base Video
Conferencing, No of expandable ports : 128, Operators Console - 01 Compatible : ISDN
101 Providing and erecting Digital key phone (12-16 direct key) [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 35.00 4666.20 No's
Providing & erecting approved make Fingerprint and card based Premium Door Controller with LCD and Keypad having following features.
(A) Optical Fingerprint and Card based Reader (Card personality Module not included]
(B) Dot-Matrix LCD and Touch sense Keypad
(C) Built-In interfaces like door lock, door sense, exit Reader, Exit switch, Ethernet RS485, Aux Input & Aux Output Port
(D) 5000 Events, Access Control, Time Attendance, Tamper Detection
(E) 4 LEDS and Buzzer
SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of CAT6 UTP 23AWG Solid: Per Meter
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of 8 x 10/100/1000BASE-T PoE ports 2 x Gigabit SFP ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or
“surveillance mode” management user interface 65W PoE budget [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of 24 x 10/100/1000BASE-T ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard
mode” or “surveillance mode” management user interface [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
108 ELV Infrastructure Setup Installation of 3 Nos. of 42U Network Racks and 60 Nos. of IP-based CCTV Cameras with necessary passive and active components. 1.00 453338.50 NOS
109 Audio-Video Conferencing, Presentations, Hybrid Meetings FOR 40-SEATER CONFERENCE ROOM AV SYSTEM (Microsoft Teams / Zoom Rooms Compatible) 1.00 2393700.00 NOS
Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically
sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied
proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with
necessary core cutting.(2)For 4/5 Star Rating of current year,(C) for 1.7 to 2 ton capacity-Premium Cat.
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all
hermetically sealed inverter type Scroll Compressor(s), microprocessor based Controller, top discharge type condensing unit(s), with R410 A Refrigerant (Or Eco
111 Friendly Green Gas if any), vibration isolators, with suitable foundation, MS Stand for Unit with necessary paint etc. complete as required. The unit shall deliver the 12.51 23836.00 HP
rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz
AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and
IEER not less than 6.5. (Design should be got approval before execution from engineer in charge)
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
INDOOR UNIT-CASSETTE TYPE
Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted
unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper
112 coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single 3.00 33027.00 No's
phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down
provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB
temperature fresh air provision compatible for Remote Operation System, (H) 3.2 TR
COPPER REFRIGERANT PIPING
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping
113 for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular 35.00 1212.00 MTR
insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as
per specifications etc with necessary refrigerant joint as required :(H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
CONTROL CABLES & WIRES
114 Supply installation testing commissioning Shielded Shielded Control Cables for VRV System with necessary ISI mark Medium class rigid PVC pipes with necessary 68.00 202.00 MTR
accessories with termination in machine and control equipments..(C) 4C X 1.5 Sq mm Shielded Armoured
115 INSULATION AND MISCELLANEOUS PIPES WORKSSupplying colourless non inflammable refrigerant Gas R-410 12.00 909.00 Kg.
Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water
116 should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by 3.00 48783.00 Nos
evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts,
cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at
RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and
lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head
to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-outs,
ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer and vertical hot air duct both logged with asbestos rope, save
oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping and drip proof alternator, self excited, self regulated,
screen protected, with excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to
IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate
with antivibration mounting engine and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box
comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC fuses. The alternator & control
panel shall be connected with provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound
absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from
inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning and
satisfactory testing as per requirement with first filling of fuel, oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary
certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below.(H) Continuous Rating of 50 KVA ,BHP not less than 65.8 BHP
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
AMF panel, Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of
scope as detailed below:
1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains
and generator Power socket for connections.
2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable
rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing
studs.,3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure.
4) Indicators with alarm Load on generator.
5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.
The AMF Panel of following capacity,(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set
Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below:
1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO & NC contacts with Automatic Battery Charger, indicating lamps
for Generator ON, Mains ON, Load and suitable control terminals and power terminals with neutral earthing studs.(C) ATS Panel for 50 / 62.5 KVA 3 phase DG
Set,Acoustic enclosure (canopy)
Supplying and erecting Acoustic enclosure (canopy) made out of 18 SWG, CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming
120 to IS:8183 The resin bonded Rockwool / PU FOAM covered from inside level not more than 75 dB at a distance of 1 mtr, as PVCT norms , on provided foundation 1.00 156247.00 Each
suitable for following size of DG Set. The enclosures for following capacity of DG sets.(C For 50 KVA/62.5 KVA
SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning
121 impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm 1.00 11110.00 Each
dia 3000 mm long- Cold Galvanized
SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested
and used exclusively for lightning protection earthing system and ring equipotential bonding.
SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly
123 backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof 1.00 7070.00 Per Set
Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).,ENERGY AUDIT & SAFETY AUDIT
Providing & fixing PVC SWR Nahni Trap IS 14735 for Drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. screwed
down or hinged grating including the cost of cutting and making good the walls . ( C ) 100 mm dia.
Providing and fixing wash down RIMLESS water closet with consealed cistern flush tank ( European type, W.C. Pan with integral P and S trap including joiting the
trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1- fine sand ) (Seal and cover to be measured and paid for separately) (A) Vitreous China Pattern : (i) in white
colour) incuding plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers, half turn flush cock of approved quality including fixing
in pipe line etc. complete (ii) 25 mm Dia.
126 Provinding & fixing handicap toilet accessaries incuding Wall Mounted Aluminum Swing-up Grab Bar Rails, 300mm length SS Toilet Grab Bar 2.00 5162.37 Each
127 Providing and Fixing 15mm dia C.P. 2 Way Bibcock of approved make with C.P. wall flange with 15mm C.P. connector pipes with Health Faucet fixing complete etc. 16.00 2146.25 Each
Providing and fixing Urinal or approved quality including push type Flush Valve of approved quality including fixing in pipe line etc. complete (ii) 15 mm
Dia.connecting the urinal with waste pipe , tap etc. complete (A) White earthenware flat back or corner type size 430 mm x 260mm x 350mm. approved by EIC
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C)
Vitreous China Sink.(i) 600mm x 450mm x 150mm size
130 Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia. 20.00 88.65 Each
131 Providing and fixing Rubber plug for sink or wash basin 20.00 17.15 Each
Providing and fixing Washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes, making good the same but excluding
132 fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour, C.P. brass waste for washbasin or sink. (B) 40mm dia., Rubber plug, 18.00 1830.12 Each
Bottle trap with necessary couplings of approved quality by EIC
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Providing and fixing shower assembly including both overhead rose shower & telphone type hand shower and concealed 4 way single lever diverter having built-in non
133 return valves with wall spout of 15mm x 150mm long including connecting inlet and outlet to main piping, cutting and making good the walls, Fixing of CP all related 4.00 5245.69 Each
to wall Mounted etc. approved by EIC
Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet and fixing to wooden pluge with C.P. brass screws and
135 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws. (B) 600mm x 20 mm size. 4.00 616.43 Each
136 Providing and fixing pillar tap,capstan head, screw down high pressure with screws, shanks and back nuts. (ii) 20mm dia. 16.00 354.70 Each
137 Providing and fixing Kitchen Sink pillar tap,capstan head, screw down high pressure with screws, shanks and back nuts. (ii) 20mm dia. 2.00 1136.25 Each
138 Providing and Fixing toilet paper holder (A) C.P.Brass 16.00 427.99 Each
139 Providing and fixing brass BALL Valve 20mm dia. 6.00 707.00 Each
140 Providing and fixing brass BALL Valve 25mm dia. 8.00 909.00 Each
141 Providing and fixing brass BALL Valve 32mm dia. 6.00 1414.00 Each
142 Providing and fixing brass BALL Valve 40mm dia. 7.00 1818.00 Each
143 Providing and fixing brass BALL Valve 50mm dia. 4.00 2222.00 Each
144 Providing and fixing brass BUCKET STAINER 50mm dia 2.00 4040.00 Each
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foudation (NSF) seal for potable water of
following diameter nominal bore tube fittings and clamps including making good the wall , ceiling and floor etc. complete [A] 20 mm Dia.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
146 be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints 95.00 72.65 Rmt.
and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 20mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
147 be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints 19.00 82.75 Rmt.
and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
148 be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints 33.00 91.84 Rmt.
and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
149 be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints 125.00 119.15 Rmt.
and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
150 be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints 45.00 148.12 Rmt.
and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
151 be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints 112.00 195.67 Rmt.
and fixing the same with adhesive solvent, including cost of all materials.
Providing, laying and jointing in true line and level U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on
152 wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed 130.00 876.12 Rmt.
including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.110
Providing, laying and jointing in true line and level U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on
153 wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed 81.00 606.00 Rmt.
including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.75
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Providing, laying and jointing in true line and level U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on
154 wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed 37.00 505.00 Rmt.
including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.50
155 Providing and fixing in position PVC Cowl Vent to pipes of etc.comp. (B) 75 mm Dia. 6.00 393.05 No.
156 Providing and fixing in position PVC Cowl Vent to pipes of etc.comp. (C) 100 mm Dia. 9.00 505.18 No.
Providing laying (to level or slopes) and jointing reinforced concrete light duty non-pressure pipes I.S.class NP2 of the following internal diameter with collars and butt
ends prepared for collar joints including testing of joints complete ( E ) 150 mm (More than 10 ton)
Providing laying (to level or slopes) and jointing reinforced concrete light duty non-pressure pipes I.S.class NP2 of the following internal diameter with collars and butt
ends prepared for collar joints including testing of joints complete ( D ) 250 mm (More than 10 ton)
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg./Cm2 in C.M.1:5
C.I. cover with frame (Light Duty) 455mm x 610 mm internal dimensions total weight of cover with frame to be not less than 38 Kg.(Wt. of cover 23 Kg.) and Wt. of
159 frame 15Kg.) ( R.C.C. top slab with 1:2:4 mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 24.00 7180.45 Each
with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. (iii) Inside dimensions 600mm x 850mm and
450mm deep for pipe lines with three or more inlets (more than 10 ton)
160 Extra over items 24.44 for every additional depth of 0.1M of part thereof beyond 450mm depth for Brick masonry chamber (iii) for 600mm x 850mm 23.00 325.60 Each
Providing & Fixing S.W. Gully trap with C I grating brick masanry chanber & water tight C I cover with fram 300mm X300mm size ( inside ) standard weight. (i)
Square mount trap (B) 150mm X 100mm size.
Providing erecting and fixing double coated Syntex/Super/Reno PVC (ISI) mark water tank of required capacity each with all necessary fittings & connection etc.
162 complete on terrace.(5000 LT. (Flush)+5000LT(Domestic)+5000 (LTR) FIRE : IN ANY SITUATION ALL THE TANKS SHALL BE FULLED FOR EMERGENCY 15000.00 3.95 LITRE
Providing, testing & commsioning of Lift pump From U.G.W.tank to O.H.W.tank incuding all valves, fitting, anti virbration pad, and accesories ( Makes :
Kirlosker or equivalent or as per instruction of EIC )850 LPM@ 30M = 1 set
Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with
stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.
165 Deisel Pump + Motor of Capacity 1680 LPM at 50 Meter headwith suitable cables & earthings. As per specifications. With testing and commisioning 1.00 501768.00 No
166 Hydrant Main Pump + Motor of Capacity 1680 LPM at 50 Meter head with suitable cables & earthings for Hydrant systems. As per specifications. 1.00 259206.40 No
167 Jockey Pump + Motor of Capacity 180 LPM at 50 Meter headwith suitable cables & earthings. As per specifications. 1.00 151500.00 No
168 Air vessel for pressurization of Hydrant & sprinkler (As per Design/Requirement) 1.00 15150.00 Nos
169 Common control panel suitable for 2 nos main pump and 1 nos of jockey pump. 1.00 90900.00 nos
170 Bucket Strainer.150mm Ø ( pump room ) 1.00 20200.00 No
171 C.I. Butterfly Valve.150mm Ø ( pump room ) 4.00 7070.00 Nos
171 C.I. Butterfly Valve.80mm Ø ( pump room ) 1.00 3838.00 Nos
171 C.I. Butterfly Valve.65mm Ø ( pump room ) 1.00 3535.00 Nos
172 C.I. Wafer type Non retrun Valve.150mm Ø ( in Pump room ) 2.00 9595.00 Nos
172 C.I. Wafer type Non retrun Valve.65mm Ø ( in pump room ) 1.00 7070.00 Nos
173 G.M. Ball Valve.40mm Ø(For Pressure Vassel in pump room) 1.00 2525.00 Nos
173 G.M. Ball Valve.25mm Ø(For Pressure Vassel drain in pump room ) 1.00 1515.00 Nos
173 G.M. Ball Valve.20mm Ø(For Pressure Switch in pump room ) 3.00 1060.50 Nos
173 G.M. Ball Valve.20mm Ø(For Pressure Gauge in pump room) 4.00 1060.50 Nos
174 Pressure Gauge.Pressure gauge dial type (100 mm) suitable for working pressure 0 TO-21 Kg/cm2. 4.00 3838.00 Nos
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Pressure Switch.
Pressure switches suitable for pressure rating of 25 Kg/Cm2 for automation of pump as specified IPS100.
PIPING. G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.150 mm Ø ( Pump Room )
PIPING. G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.150 mm Ø ( Pump Room )80 mm Ø (Pump Room )
PIPING. G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.150 mm Ø ( Pump Room )65 mm Ø (Pump Room )
177 CHECK VALVE WITH GONG BELL 150MM DIA 1.00 65650.00 NOS
Fire Tanker Inlet.Fire brigade header of 150 mm dia G.I 'C' class pipe 1.5m long consisting of 4 no.s 63 mm dia SS male inlet coupling for supplying water in fire UG
tank etc. complete as required with PVC cap & chain.
Siamese Connection. GM/SS fire brigade connection (siamese connection) consisting of Twin type connection (2 no./ set), 1 No. 150 mm dia butterfly valve, 1 No.
179 mm dia non-return valve and 150 mm dia flanged outlet complete with SS bolts, nuts and rubber insertions as required, including painting as per specs. with P.O red 1.00 17170.00 No
colour (Valves quantities are taken in respective items)
180 Court Yard Hyrdant.Single Hydrant Valve 63mm Ø (For Yard Hydrant) 5.00 6767.00 Nos
180 Court Yard Hyrdant.Size - 625 x 425 x 225 Hose box with cavas hose pipe & hose nozzel (For Yard Hydrant) 5.00 6565.00 Nos
Piping. G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
181 supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.& under ground pipe shall be wraping by 4mm thick bitumen sheet 150 150.00 2323.00 MTR
mmØ ( Hydrant Ring Pipe)
Piping. G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
181 supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.& under ground pipe shall be wraping by 4mm thick bitumen sheet 100 20.00 1616.00 MTR
mmØ (Hydrant Pipe)
Piping. G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
181 supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.& under ground pipe shall be wraping by 4mm thick bitumen sheet 80 8.00 1161.50 MTR
mmØ (Basement Header to Ground floor Court Yard Connection Pipe)
182 Pipe Support of G I Hanger Clamp 150mmØ 150.00 50.50 Nos
182 Pipe Support of G I Hanger Clamp 100 mmØ 20.00 50.50 Nos
182 Pipe Support of G I Hanger Clamp 80 mmØ 8.00 50.50 Nos
183 G.M. Air Release Valve.25mm Ø ( SPRINKLER & HYDRANT ) 1.00 1818.00 No
184 Bucket Strainer.100mm Ø ( terrace floor ) 1.00 10605.00 Nos
185 C.I. Butterfly Valve.100mm Ø (Terrace floor ) 1.00 4848.00 No
186 G.M. Ball Valve.25mm Ø (For Air Release Valve ) 1.00 1515.00 Nos
186 G.M. Ball Valve.20mm Ø (For Hose Reel tapping ) 3.00 1010.00 Nos
187 C.I. Wafer type Dual Plate Non retrun Valve.100mm Ø ( on terrace floor ) 1.00 5050.00 Nos
188 G.M. /S.S.Single Hydrant Valve 63mm Ø 3.00 6262.00 Nos
RISER PIPE.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
189 supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints with Pipe Support of G I Bracket and GIU BOLTS100mmØ Hydrant Riser 14.80 1616.00 MTR
190 HOSE REEL.Hose Reel With 20 mm High pressure braided rubber hose as per IS: 444 Type II / PVC Specification & SS SHUT OFF NOZZLE.(Set) 3.00 8585.00 Nos
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
191 single Hose Boxes/Cabinets.Fire Hose (Canvas Hose) – Anti Fungal with 63mm Male & Female Hose couplings & Short branch pipe with copper wire binding.(Set) 3.00 10201.00 Nos
192 5KGS AUTOMATIC MODULAR TYPE ABC CLEAN AGENT GAS FIRE SPRINKLER 2.00 7070.00 Nos
193 C. I. Butterfly Valve.100mm Ø 2.00 4848.00 Nos
193 C. I. Butterfly Valve.65mm Ø 1.00 3535.00 Nos
PIPING.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.WITH Pipe Support of G I Hanger Clamp80mm Ø
PIPING.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints. WITH Pipe Support of G I Hanger Clamp65mm Ø
PIPING.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints. WITH Pipe Support of G I Hanger Clamp50mm Ø
PIPING.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints. WITH Pipe Support of G I Hanger Clamp40mm Ø
PIPING.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints.WITH Pipe Support of G I Hanger Clamp32mm Ø
PIPING.G.I. “C” Class Pipe as per IS 1239 & fittings with MS brackets & G.I. ”U” Bolts (Vertically at every 3M & Horizontally at every 1.5 M). The pipes &
supports shall be painted with 2 coats of primer ( Zinc Oxide) & 2 coats of finishing paints. WITH Pipe Support of G I Hanger Clamp25mm Ø
195 Sprinkler Heads.Pendent sprinkler 125.00 414.10 Nos
196 Flow Switch.100mm Ø 2.00 7272.00 Nos
196 Flow Switch.65mm Ø 1.00 3838.00 Nos
Fire Buckets,Fire buckets of galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside , red outside , black on the bottom,
inscribed with letters “FIRE” in black and gold. ( Lift Machine Room & Pump room )
Fire Extinguisher.ABC Type D C P Extinguishers 4 Kg. ( All floor )
198 Fire Extinguisher.CO2 Extinguishers 4.2Kg. ( per floor,Pump room, Electrical meter & Lift Machine room) 3.00 7575.00 Nos
199 Self-Glowing SignageSelf-Glowing Signage indicating locations of Emergency Exits,Refuge Areas,Hydrants,Portable Extinguishers & Pumps. 10.00 505.00 Nos
200 ALARM SIREN RANGE 1KM. 1.00 5050.00 Nos
Supply, installation, and maintenance of a high-quality lawn, including soil preparation, leveling, turf or seed laying, fertilization, irrigation system installation, and
ongoing care to ensure healthy growth and aesthetic appeal.
Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth : 150 thk. M10 PCC Below Cobble Stone
The product is a premium-grade black limestone cobblestone with precise dimensions of 100mm x 100mm and a thickness of 75 . Engineered for exterior applications, it
is specifically suited for paving, pathways and landscaping due to its high durability and structural integrity. The cobblestone exhibits a natural surface finish,
enhancing slip resistance and providing a robust, aesthetically refined solution for heavy-duty outdoor installations. Filling cement slurry in grooves with proper ratio
as per instruction of engineering incharge
Supply and installation of a simple sliding entrance gate (as per width of gate) constructed with high-quality mild steel or stainless steel, featuring a powder-coated
finish for durability, smooth sliding mechanism with galvanized tracks, and a heavy-duty locking system. (7500mm X 1500mm Min High)
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Supplying on site plants with following specifications . Plants would be in good condition and of specified height. The rates would be inclusive of all taxes, sales tax,
205 Octroi,transportaion etc. complete F.O.R. site. Conditions of plant would be verified at the time of selction as well delivery. All complete and as per instructions of the 0.00 0.00 0
Engineer-in-charge.Trees
205 Lagerstroemia thorell II - 3.66m ht 2.00 3535.00 Nos.
205 Millingtonia hortensis - 3.66m ht 8.00 3030.00 Nos.
205 Millingtonia hortensis - 3.66m ht 12.00 3030.00 Nos.
205 Gresses & Bamboos 4.00 2020.00 Nos.
206 Bambusa valgaris - 1.83m ht. 12.00 2020.00 Nos.
206 Nephrolepis exalotta smithi - 0.45x0.30m 50.00 303.00 Nos.
Providing and preparing a flower bed, including soil excavation up to 300 mm depth, mixing with manure and compost, leveling, and planting seasonal or perennial
206 flowering plants in properly spaced rows. The work includes watering, mulching, application of fertilizers, and pest control, ensuring healthy plant growth and vibrant 429.00 959.50 Sq.Mt.
The remote-operated barrier at the entry gate, with a total cost of for a 7-meter span, is a high-security access control system designed to regulate the entry and exit of
vehicles or pedestrians. This system features a motorized actuator that automatically raises or lowers a 7-meter long barrier arm, which is made of durable, corrosion-
resistant materials and typically includes reflective markings for visibility. The barrier is operated remotely via a transmitter, control panel, or integrated access control
207 system (such as RFID or biometric scanners), allowing authorized access without manual interaction. The system is equipped with safety sensors to detect obstacles and 1.00 121200.00 Nos.
prevent the barrier from closing on vehicles or pedestrians. The installation includes a power supply, often with a backup battery, and a central control unit to manage
operations. covers the entire installation, including the barrier arm, motor, control systems, safety features, and installation labor. This system is ideal for high-traffic
areas such as industrial gates, parking lots, and gated communities, providing secure, efficient, and automated access management.
Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in
208 position and applying a priming coat of approved steel and providing and installing GI Sheets of TATA or equivalent or as per approved bu EIC primer all complete as 16787.00 131.83 kg
per the directions of Engineer in charge: Construction of Steel Shed for Parking as per Instruction of Engineer In charge and Fabricator Details.
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M200 grade concret as per approved
design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.
Supply and rigid installation of a 16-inch (400mm) shatterproof polycarbonate convex safety mirror with a high-visibility weather-resistant ABS backing and sun hood.
210 The turnkey scope includes multi-angle adjustable GI mounting brackets, high-tensile wall/pole fasteners, and skilled labor for precise orientation at blind spots 2.00 10100.00 Nos
complete per unit or as per EIC.
Drilling a vertical tube well up to 500 feet depth through all strata; providing and lowering uPVC/GI casing and slotted screen pipes; gravel packing; developing with
211 an air-compressor; and supplying, installing, and commissioning a suitable submersible motor pump set with column pipes, cables, and starter panel up to a fully 1.00 505000.00 Nos
functional, running stage for drinking and domestic use.
Demolition including stacking of serviceable materilasand disposal of unserviceable materials with all lead and
212 lift. (i) R.C.C. work 557.00 1081.83 CUM
Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
Dismentling steel work including distempering and stacking the materials with all lead and lift.
Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.
Item Description of Item
Quantity Rate In figures Unit Amount
No. (with brief specification and reference to book of specifications)
Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable
217 from site of work with all lead and lift 13185.00 19.92 SQM
Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and
lift.(i) G.I.sheet roofing. FOR PARKING
Dismentling steel work including distempering and stacking the materials with all lead and lift. (Steel beam & Column of Parking)
220 Recovery of Windows From Existing Building 65.00 -500.00 Nos -32500.00
221 Recovery of Doors From Existing Building 36.00 -1000.00 Nos -36000.00
222 Recovery of Wardrobe Doors From Existing Building 21.00 -500.00 Nos -10500.00
223 Recovery of Fans From Existing Building 20.00 -300.00 Nos -6000.00
224 Recovery of Tube Light From Existing Building 20.00 -100.00 Nos -2000.00
225 Recovery of Wiring & Switch Board From Existing Building 1.00 -15000.00 Lumsum -15000.00
226 Recovery of Reinforcment Steel From All RCC Member 13304.00 -15.00 kg -199560.00
Rupees Six Crore Ninty five Lakhs Eleven Hundred Ninty five rupees and eighty paise only
I / We / am/are willing to carry out the work at ________________________________% above/below percent (should be written in figure and words) of the estimated rates mentioned above. Amount of my/our tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as
per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Himatnagar Irrigation Sub Dn. No. 1 Sabarkantha Irrigation Division
Himatnagar Himatnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD SID NOB.pdf
BOQ SID NOB.pdf
Drawing SID NOB.pdf
Tender Notice 18 of 2026-27.pdf
TS Volume of Index SID NOB.pdf
TS Volume 1 SID NOB.pdf
TS Volume 2 SID NOB.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .