COMPREHENSIVE MAINT CONTRACT OF ALL TYPE OF BR AND E M WORKS FOR OTM ACCN AT GE 969 EWS AT BARAMULLA

Amount

Desludging of septic tank and manholes and capacity , size and depth including disposal of waste water and sludge through machanically/Using honey sucker machine and dividely store in covered container ert complete and removing the sludge in covered van/trolly out side the deffence land and taking off the manhole cover and placing in the same position after taking out sludge and covering pit minimum 30cm thick layer of earth work etc all as directed. NOTES :- The unit rate for desludging using Honey sucker Machine including hiring rate form any sources, Its operator , Hose required ( at least 50 mtr ) and Fuel etc. per trip of truck i e 3.0 to 4.05 Cum and the cost of dewatering shall also be included in the unit rate . Dewatering pit excavated in the unit area by contractor concern will liaise with the sources of honey Sucker Machine and during working any defects raised contractor will be responsible in all respect . Complete all as specified and directed by Engr -in - charge.

Taking out silt ,liquid water sludge in solid/semi solid sae from septic tank /sump of any capacity , depth and size manually and removing the same to a distance of exe250m but not exc 500 m including depositing the sludge excavation in any type of soil with covering by earth over it and leaving the septic tank/sump clean etc complete all as specified and as directed.

Demoliation of brick masonary , stone masonary etc built in cement mortar of any description including excavation and removal where ever required for embeded portion complete all as specified and as directed.

Demolition of concrete in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 (using 40 mm aggregate) as in mass concrete complete all as specified and as directed.

M&L for brick work with sub class 'B brick (old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

Demolition Concrete of any description and in any position not otherwise specifically provide for Cement concrete (unreinforced ) complete all as specified and as directed.

M&L for pcc (1:2:4) type B1 (using 20 mm grade aggregate ) as in copings etc including all necessary form work complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) over brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

Demolition and breaking up drain pipe 75/100 mm dia (AC, saltglazed, PVC or RCC pipes) set in cement mortar or any description incl Excn of Earthwork, RFR, removal and making good complete all as specified and as directed.

M&L for pcc (1:4:8) type D1 (using 20 mm grade aggregate ) as in bed to drain pipes including packing under and haunching against the side of pipes after these are laid tested for 150 mm bore of pipes complete all as specified and as directed.

S&F 150 mm reinforced concrete pipes , class NP2 laid and jointed complete with collars complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in walls, floors fixed complete using PVC solvent and necessary testing etc, complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) bend/Tee etc complete all as specified and as directed.

Demolition of cement concrete (reinforced) in any position and any thickness (below or above ground level) complete all as specified and as directed.

M&L for pre-cast reinforced cement concrete type B1 (using 20 mm grade aggrigate ) set in cement mortar 1:6 in landings cover slab (for manhole/ drain cover ) etc complete all as specified and as directed.

M&L TMT bars 10mm dia and over cut to length , bend to shape required including cranking , bending spirally for hookings for cols ,hoking ends and binding with and including mild (aneeled) not less than 0.9 mm dia complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key screbbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth with using extra cement in cement morta (1:4) complete all as specified and as directed.

M&L for preparation of newly or previously untreated surfaces and finishing wall surfaces with Acrylic Smooth exterior paint of required shade (Two coat applied @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfacs complete all as specified and as directed.

Preparation of old surfaces and applying one coat of cement base paint on walls surfaces /weather boardings complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coats of cement base paint on walls surfaces/weather boardings etc, complete all as specified and as directed.

M&L for precast cement concrete type B-0 (1:2:4) (12.50mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame set in cement mortar (1:4) complete fixed in repairs all as specified and directed.

Dismantling trellis work (Jafri) (One way), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embeded in cement concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

M&L for cement concrete type C-2 1:3:6 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L second class soft wood clean sawn as in scantling in framed and fixed work etc complete all as specified and as directed.

S&F 2nd class softwood 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified and as directed.

M&L for preparation of newly or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs galvanized two strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts incl. securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc as directed (Each line of wire to be measured) complete all as specified and as directed.

M&L for punched tape concertina coils 1050 mm dia complete fixed in repairs all as specified and directed.

Demoliton of cement concrete (un-reiforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring complete all as specified and as directed.

M& L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base complete all as specified and as directed.

M& L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment .complete all as specified and directed.

M & L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) .complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30m x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of f the permishes, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6), complete all as specified and as directed.

M&L Walling of random rubble masonry uncoursed built in CM (1:6) complete all as specified and directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement .complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth with using extra cement in cement mortar (1:4) complete all as specified and as directed.

Preparation of Preparing surfaces plastered New surfaces walls and applying two coat of OBD. Complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering with emulsion on walls over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for preparation of newly or previously untreated surfaces and finishing wall surfaces with Acrylic Smooth exterior paint of required shade ( two coat applied @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint of required shade (Two coat applied @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfacs complete all as specified and directed.

S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness inlcuding cover fillets, complete all as specified and as directed.

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted as per specifications and drawing. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section.

S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed.

S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling, complete all as specified and as directed.

S&F 80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm incl dismantling, complete all as specified and as directed.

M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 cm in width or girth,not otherwise described complete all as specified and directed.

Taking down of Shutters of any description n exc 1 sqm each complete all as specified and as directed.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) complete all as specified and as directed.

S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and directed.

S&F Aluminium handles 100 mm , cast type, anodised complete all as specified and directed.

S&F Aluminium handles 150 mm , cast type,anodised complete all as specified and as directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Complete all as specified and directed.

M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick complete all as specified and as directed.

M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed complete all as specified and as directed.

S & F 25 mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting complete all as specified and as directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail complete all as specified and as directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove joint as in ceiling panelling complete all as specified and as directed.

S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 8 to 10mm thick fixed to timber frame work complete all as specified and as directed.

M&L for french polishing on surfaces of any descreption, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish all as specified. Complete all as specified and station policy or directed by engr-in-charge.

M&L two coats of synthetic enamel paint including preparation of surface on old wooden sruface over 10 cm width or girth complete all as specified and as directed.

Taking down and replaced with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings complete all as specified and as directed.

Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors complete all as specified and as directed.

Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish complete all as specified and as directed.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 ltrs to 500 Ltrs complete all as specified and as directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed , chromium plated,complete all as specified and as directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed.

S&F in repair stop valves fancy tupe chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long. complete all as specified and as directed.

S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed.complete all as specified and directed.

S&F in repairs vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap, complete all as specified and as directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing complete all as specified and as directed.

S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages complete all as specified and as directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard complete all as specified and as directed.

S & F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S &F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc, complete all as specified and as directed.

S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkat, complete all as specified and as directed.

S&F in repairs Single piece WC with UF soft closet, seat cover , hinges, fixing acessories including flushing cistern sizee (370x690x795mm) includibg S trap 300mm, health faucet ad jet spray complete all as specified and as directed.

S&F in repairs CP health flucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected as specified complete all as specified and directed.

S&F in repair PP-R gate valves 32mm dia (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs 20 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and directed.

S&F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F in PVC (SWR) junction single T equal or unequal 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia fixed complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia fixed. Complete all as specified and as directed.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 complete all as specified and as directed.

M&L Creosote preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type with gang box complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type with gang box, universsal complete all as specified and as directed.

S&F switch piano Flush type, single pole15 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universsal complete all as specified and as directed.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts, 6 Amps, complete all as specified.

S&F in repairs Bell Push 5 Amp , flush type complete all as specified and as directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body complete all as specified and as directed.

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

Supply and fix LED Lamp 10W. Make : Havells/Philips / Bajaj/Crompton

S&F Decorative ultra slim square profile LED lighting fixture 1x20 watt with extruded polycarbonate, environmental friendly, energy efficient, all as directed by Engr - in - Charge. Havells Cat part No EXACP7UN1W020 or equivalent in Bajaj or CG

S&F in replacement LED Mirror Light 10 W, Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. suitable for surface mounting on a ceiling or wall complete all as specified and as directed. Havells Cat part No LHEXACP5IN1W010 or equivalent in Bajaj or CG

S&F in repair LED 12W down light Decorative, surface mounting, dome shaped pendant in green & black finishes complete all as specified and as directed.

S&F in repair LED 7.5W down light Decorative, surface mounting, dome shaped pendant in green & black finishes complete all as specified and as directed. Havells Cat part No LHFHDPE1TN1K020 or equivalent in Bajaj or CG

S&F in repair LED 10W surface Bed/track light complete all as specified and as directed.

S&F ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 6.5W LED complete all as specified and as directed. Havells Cat part No LHEXCGP7IN5W006 or equivalent in Bajaj or CG

S&F 6 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed by Engr-in-Charge. Havells Cat part No LHEBADP7IZ1W006 or equivalent in Bajaj or CG

S&F 2 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed by Engr-in-Charge. Havells Cat part No LHEBADP7IZ1W006 or equivalent in Bajaj or CG

S&F 15 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed by Engr-in-Charge. Havells Cat part No LHEBADP6IZ1W015 or equivalent in Bajaj or CG

S&F 36/40 Watt Warm White LED ultra modern recess mounted luminaire (2'x2'), environmental friendly, new generation,aesthetically designed, with high brightness complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150/200/250mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs distribution board, TPN 4 way, Double door metallic sheet metal enclosure for DB when MCBs to be used, 440 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F Distribution board, SPN 2 way, single door complete all as specified and as directed.

S & F in repairs MCB SPN 40 to 63 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed. .

S & F in repairs MCB SPN 32 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed. .

S&F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

S & F in repairs MCB TPN 40 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed. .

S & F in repairs MCB TPN 63 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 sqmm all as specified and directed

Supply and fix, install and testing ISI marked, metalic body, energy efficient, water heater storage type, copper tank, electgrically operated, single phase, 50 Hz (5 star rating), complete of 25 Ltr capacity with and including supply and fixing, wire armoured 450mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, Anchor fastner - 04 Nos of suitable size , 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect and all as specified and directed by Engr-in-Charge. Old geyser deposited to MES store yard.

Repair and re-fixing, re-assembling the existing cealing fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan, write MES no on fan blades including nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed.

S&F in repair capacitor 2.5/3 mfd suitable for 250mm/350mm sweep exhaust fan complete all as specified and directed.

S&F heating element including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape (triangular/round) complete all as specified and directed.

S&F heating element including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape (triangular/round) complete all as specified and directed.

S&F Thermostat including rubber / PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for existing geysers of capacity 25 / 35 / 50 ltrs including taking down existing unserviceable thermostat complete all as specified and as directed.

S&F PVC connecting pipe 18"/24" long with brass adopters for cold/hot water and connecting up with complete for 25 /35 /50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe complete all as specified and directed.

Note:- Schedule of credit Rs. 1,44,645.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S HAJI MOHD ASHRAF SUMJI

M/s ABDUL QAYOOM LONE & BROS