Building work

No. figures Amount

1 Boring of holes 3.0 mt. deep in ordinary soil (for cast in situ piles) and 19.00 Each 1587.19

getting out the oil and disposal of the surplus excavated soil as

directed with in lead of 50 mt. for following dia. of piles and for under

reamed piles of following diameter and deduct from the rate for bore

holes of 3.5 mt. depth, if bore holes are made deeper or shallower

than 3.5 m. for piles of following diameter (A) 300mm dia.

2 Boring of holes 2.50 mt. deep in ordinary soil (for cast in situ piles) 9.00 Each 1304.95

and getting out the oil and disposal of the surplus excavated soil as

directed with in lead of 50 mt. for following dia. of piles and for under

reamed piles of following diameter and deduct from the rate for bore

holes of 3.5 mt. depth, if bore holes are made deeper or shallower

than 3.5 m. for piles of following diameter (B) 250mm dia.

3 Providing and laying cement concrete 1:4:8 (1- cement : 4 coarse 7.60 Cum 2651.18

sand : 8 hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in Foundation and Plinth.

4 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 6.50 Cum 3481.28

coarse sand : 4 graded stone aggregates 20 mm nominal size) and

curing etc. complete excluding the cost of formwork in foundation and

5 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 4.50 Cum 11775.49

coarse sand : 4 graded stone aggregates 20 mm nominal size) and

finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C. work in

Columns having any cross sectional area.

6 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 8.30 Cum 8593.80

coarse sand : 4 graded stone aggregates 20 mm nominal size) and

finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C. work in

Beams having any cross sectional area.

7 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 0.30 Cum 10219.39

coarse sand : 4 graded stone aggregates 20 mm nominal size) for

RCC Lintel including finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement.

8 Providing and laying ordinary cement concrete 1:2:4 (1- cement : 2 5.50 Cum 6888.15

coarse sand : 4 graded stone aggregates 20 mm nominal size) and

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C. work in

Slabs having any thickness.

9 Providing and laying brick work using common burnt clay building 15.50 Cum 4021.02

conventional type bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) including the cost of all materials and labour

charges etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

of 20cm. thickness including watering, ramming and consolidating

etc. completed.

11 Providing and laying brick work using common burnt clay building 17.60 Cum 4061.51

conventional type bricks having crushing strength not less than

kg./Sq.cm. in Super structure in Cement Mortar 1:6 (1- Cement : 6 -

fine sand) including the cost of all materials and labour charges etc.

12 Providing I.S.I. mark T.M.T. Bar Fe-415 reinforcement for R.C.C. 2292.00 Kg. 67.26

work including bending, binding and placing in position complete upto

floor two level.

13 Providing and fixing steel door with shutter frame iron angle, 18mm 5.80 Sq.m. 1965.46

steel plate with iron oxidized hinges handle, stopper, locking

arrangements including welding, cutting, hoisting fixing in position oil

painting two coats primer coat etc. complete for Door.

14 Providing and fixing steel window with shutter frame 50 x 50 x 6 mm 8.30 Sq.m. 3212.81

iron angle, 18mm steel plate with 10mm dia. round bars hinges,

handle, stopper, locking arrangements etc. steel work welded built up

section cutting, hoisting fixing in position oil painting two coats one

primer coat etc. complete for Windows.

15 20mm thick sand faced cement plaster on wall upto height 10 mt. 115.60 Sq.m. 329.29

above ground level consisting of 12mm thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C.M. 1:1 (1

cement : 1 sand) etc. complete.

16 Providing 15mm thick cement plaster in single coat on brick / 220.80 Sq.m. 160.04

concrete wall for interior plastering upto floor two level finished even

and smooth in cement mortar 1:3 (1-Cement : 3-sand) for finishing

with a floating coat of neat cement slurry.

17 Providing 10mm thick cement plaster in single coat on brick / 45.60 Sq.m. 213.18

concrete wall for interior plastering upto floor two level finished even

and smooth in cement mortar 1:3 (1-Cement : 3-sand) for ceiling.

18 Providing and laying vitrified tiles 8mm to 10 mm thick, 24" x 24" in 45.30 Sq.m. 1073.13

flooring, treads of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

19 Distempering (two coats) with oil bound distemper of approved brand 196.40 Sq.m. 112.49

and manufacture and of required shade on wall surfaces to give an

even shade, over and including a priming coat with alkali resistance

primer of approved brand and manufacture after thoroughly brushing

the surface and other foreign matter and also including preparing the

surface even and sand papered smooth including applying two coats

of Birla or Asian lappy putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

20 Finishing wall with water proofing cement paint on wall surfaces 115.60 Sq.m. 89.58

(three coats) to give an approved brand and manufacture and of

required shape even shade after thoroughly brushing the surface to

remove all dirt, dust and remains of loose powdered materials.

21 Providing and laying half brick masonary in common burnt clay 10.90 Sq.m. 631.02

building conventional type bricks having crushing strength not less

than 35 Kg/Sq.cm. in cement mortar 1:5 (1 cement : 5 coarse sand)

in foundation and plinth including the cost of all materials and labour

charges etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

22 Providing and fixing wash basin with single hole for pillar tap with C.I. 1.00 No. 1382.37

or M.S. brackets painted white including sutting holes and making

good the same but excluding fittings (A) Vitreous china (ii) flat back

wash basin 550 mm x 400mm size.

23 Providing and fixing water closet squatting pan (Indian type W.C. 1.00 No. 948.09

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be

measured and paid for separately) vitreous china (i) long pattern in

white colour.

24 Providing and fixing 100mm size P or S trap for water closet 1.00 No. 329.29

squatting pan including jointing the trap with the pan and soil pipe in

cement Mortar 1:1 (1-Cement : 1-Fine sand) (A) Vitreous china.

25 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted 1.00 No. 2280.17

white including cutting holes in walls and making good the same but

excluding fittings (C) Vitreous china sink (i) 600mm x 450mm x

150mm size.

26 Providing sock pit of 5.00 Cu.M. Volume including excavating and 2.00 No. 3372.19

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing, curing etc. complete as directed.

27 Constructing brick masonary road gully chamber 500mm x 450mm x 2.00 No. 2017.19

600mm including 500mm x 450mm C.I. horizontal grating with frame

28 Constructing a cooking platform 60 cm. width and 70 cm height 2.10 Rmt. 2694.77

resting on B.B.Masonry walls 23 cm. thick in C.M.(1:6) with fixing or

precast RCC 1:2:4, 8 cm thick slab with marble chips set in C.M. 1:6

(6mm thick terrazo) with plastering on exposed faces of wall in C.M.

1:4 etc. complete

29 Providing and fixing to wall, ceiling and floor 6.0 KgF/Cm2 working 20.00 Rmt. 80.17

pressure polythene pipes of the following outside dia. low density

complete with special flange compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (A) 20mm dia.

30 Providing and fixing to wall, ceiling and floor 6.0 KgF/Cm2 working 15.00 Rmt. 102.93

pressure polythene pipes of the following outside dia. low density

complete with special flange compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (B) 25mm dia.

31 Providing and fixing to wall, ceiling and floor 6.0 KgF/Cm2 working 15.00 Rmt. 118.99

pressure polythene pipes of the following outside dia. low density

complete with special flange compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (C) 32mm dia.

32 Providing and fixing cast iron (spun) Nahni trap of the following 5.00 No. 615.63

nominal diameter of self cleaning design with C.I. screwed down or

hinged grating including cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet.

33 Providing and fixing screw down bib taps of following size. (A) Brass 5.00 No. 186.79

screw down bib tap polished bright. (i) 15mm dia.

34 Providing and fixing gun metal check or non return fullway wheel 5.00 No. 186.83

valve (i) 15mm dia.

35 Providing and fixing PVC Water tank ISI mark Sintex or equivalent as 1000.00 Liter 3.95

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

36 Providing and laying (to level or slopes) and jointing with stiff mixture 10.00 Rmt. 518.84

of cement mortar in proportion 1:1, salt glazed stoneware pipes

including testing of pipes and joints complete including providing and

laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded

stone aggregate 40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary formwork and curing

complete (B) 150mm dia. (166mm avg. bed thickness).

37 Providing and fixing on wall face PVC rain water pipe 110mm dia. & 14.00 Rmt. 232.70

4 kg/sqm. is used including fitting the joints with approved brand.

38 Providing and laying white glazed tiles 6mm thick in flooring treads of 14.80 Sq.m. 957.63

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand) finishing with flush pointing in white cement.

39 Providing and fixing 25mm thick shutters for cupboards etc. including 13.20 Sq.m. 3064.44

anodized alluminium butt hinges with necessary screws (A) Indian

teak wood (i) Fully panelled.

40 Providing and fixing chrominum plated brass half turn flush cock of 1.00 No. 263.77

approved quality including fixing in pipe line etc. complete (ii) 25mm

41 Providing and fixing 100mm dia. PVC spigot and socket soil waste 10.00 Rmt. 218.16

and ventilating pipe including fitting joints in lead or rubber base

water proofing solution and fixing with clamps as directed etc. making

the walls good etc. as directed.

42 Providing and fixing in position PVC cowl vent of 100mm dia. pipes. 2.00 No. 72.72

43 Providing and fixing 600mm x 450mm bevelled edge mirror of 1.00 No. 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden plug with C.P. brass screws and washers.

44 Providing and fixing C.P. brass waste for wash basin or sink (A) 2.00 No. 67.91

45 Providing and fixing fisher union for wash basin (A) 32mm dia. 2.00 No. 78.75

46 Providing and laying China mosaic type water proofing treatment on 49.60 Sq.m. 747.29

terrace including (a) applying neat cement slurry 2.75 Kg./Sqmt. of

cement and mixed with water proofing compound after cleaning the

surface (b) laying cement concrete using brick bats 25mm to 100mm

size with 50% of C.M. 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound over 20mm thick layer of C.M. 1:5 to

required slope including rounding of junction of walls and slab (c)

After two days of proper curing applying a second coat of cement

slurry (d) Finishing the surface with 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand) and china mosaic tiling and finally finishing

the surface with trowel with white cement slurry (e) after finishing the

whole terrace shall be flooded with water for a period of two weeks.

47 Providing and fixing ball cock as directed by Engineer in charge (A) 1.00 No. 132.89

Copper metal (i) 25 mm dia.

48 Providing and laying polished Kota stone slab flooring over 20mm 8.20 Sq.m. 200.29

(average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry

including rubbing and polishing etc. complete. (A) 25mm thick.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

49 Filling in plinth with sand under floors including watering, ramming, 3.00 Cum 460.19

consolidating and dressing etc. complete.

50 Providing and fixing a board showing "Aanganwadi" of size 0.60 x 1.00 No. 2908.80

0.30 mt. including painting Gujarati Language as directed.

51 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and 8.00 Cum 954.75

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.(iii)

52 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse 0.50 Cum 3816.45

sand : 6- crushed stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping.

53 Providing and fixing precast Rubber Dye / steel Dye inter locking 33.00 Sq.m. 685.42

concrete block 60mm thick with grade of concrete M-300 pneumatic

compressed / vibrated mechanically and as per approved design

confirming to IS 15658 : 2006 including 35 mm sand layer for

levelling and filling the joint with sand in proper line and level as per

guidelines of IRC : SP 63-2018 etc. complete.

54 Colour washing with lime on wall surface (three coast) over and 70.00 Sq.m. 17.66

including a primer coat of white washing to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

and other foreign matter.

55 Measured Around Us Scales - Horizontally and Vertically : Vertically 1.00 No. 327.24

Scales painted on the wall 15 cm. wide and length 3 mtr. on existing

wall surfaces with single coat including priming on existing wall

surface and ceiling.

56 Symmetry Around Us : Symmetrical shapes (like round, square etc.) 2.40 Sq.m. 327.24

with Revealing part of whole images (Painting on door or window

surface) including painting whole door & windows with finishing etc.

57 Colour Treasures :- Painting colour teasures on existing metal 1.00 No. 232.70

surface like fan colour wheel, metalic fan blades (each is a circle with

dia. 3 cm approx.) with metal primer and enamel matt paint with all

necessary finishing etc. complete.

58 Map Your World :- Mapping the Neighbourhood / Village / Mapping 9.00 Sq.m. 727.20

the City / District / State / Mapping the Country / Mapping the World /

Me and my world painting (1.5 mtr. dia.) on existing wall surface and

print on plastered wall surface with cement primer and enamel (matt

paint) etc.

59 Time Devices : Making Clock with MS arms and writing surface, 60 1.00 No. 552.67

cm in diameter by making new chalk board surface on existing

masonry wall with 1:6 (1 cement : 6 sand) in two coats and finished

coat with 1:2 cement marble stone dust and painting on this surface

with providing and fixing hands of the wall clock with MS flat (0.4 cm

thick and 2 cm wide) and MS flat (0.4 cm thick and 1 cm wide) with

galvanised steel bolts and washers with painting clock dial and hands

including all necessary surface preparation etc. complete.

60 Number Lines : (A) Number Line Caterpillar / Number Line Train 2.25 Sq.m. 596.30

Number / Number Line in a row of Children on existing walls surface

as per approved drawing and design etc. complete.

61 Abacus as a Built Element : Making Hoop Abacus set for classroom 1.00 Set 4944.96

on wall (Different length for different classes) as per approved

drawing and design etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

62 Prewriting Patterns on Window Grills as per approved drawing and 0.54 Sq.m. 4654.08

design etc. complete.

63 Prewriting Patterns on Wall surfaces by making new chalkboard 0.72 Sq.m. 741.74

surface on existing masonry wall with 1:6 (1 cement : 6 sand) in two

coats and finished coat with 1:2 cement marble stone dust with

painting and printing on new chalkboard wall surface and ceiling.

64 Writing and Displaying Surfaces / New Chalkboard : Providing writing 7.20 Sq.m. 138.17

and displaying surfaces on existing walls / Chalkboard by painting on

existing wall surface etc. complete.

65 Play with words : Making World wall with Alphabet border by making 0.96 Sq.m. 785.38

60 x 140 cm writing surface on wall with 10 cm wide border including

making new chalkboard surface 1:6 (1 cement : 6 sand) in two coats

and finished coat with 1:2 with cement marble stone dust with

painting grid/t.

66 Dot Boards on floor and walls :- Making DOT Board & GRID Board 4.41 Sq.m. 363.60

on floor and walls with painting and painting dots in straight rows,

dots staggered in straight rows on existing wall surface and ceiling as

per approved drawing and design etc. complete.

67 Grid Boards : Provide a Floor Grid Boards of size 60cm x 60cm with 2.21 Sq.m. 333.30

1:2:4 P.C.C. flooring with glass / PVC strips as per approved drawing

and design etc. complete.

68 Board games on floor : Making Indigenous Board Games / Flat Dice 1.08 Sq.m. 399.96

like Sapaat Pasa with necessary smooth floor finish as per drawing

etc. complete.

69 Magic squares on floor and walls : Providing magic squares on floors 0.61 Sq.m. 727.20

and walls with 3 x 3 Magic Square / 4 x 4 Magic Square by making

new chalk board on existing masonry wall 1:6 (1 cement : 6 sand) in

two coats and finished coat with 1:2 with cement marble stone dust

and than making painting.

70 Cubby Holes and Peep Holes on walls : Making cubbyholes with 1.15 Sq.m. 1236.24

bricks in the existing low heights walls with necessary finishing etc.

complete as per design.

71 Periscope : 2 - For Ground floor building periscope provided with 1.00 No. 1454.40

1.00 mt. clear height with 15 cm dia. PVC pipe including fixing with

elbows at top and bottom with transparent glass including all

necessary fixing with making necessary holes and finishing it etc.

72 Providing and fixing PIN UP BOARD with necessary base fitting as 1.50 Sq.m. 727.20

per given drawing etc. complete.

73 Pipe phone : Making pipe phone by providing B class MS pipe of 4.00 Rmt. 421.78

50mm dia. and necessary length with existing ramp including all

fixing and finishing etc. complete.

74 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.0 sq. mm & 13.00 Pt. 150.00

earthwire of 1.0 sq. mm (green) both are of ISI marked FR PVC

insulated multistrand copper wires in existing pipe duly erected,

complete with 6A Tissino Type ISI marked flush type switch / bell

push and accessories erected on polished wooden block / metal /

PVC box covered with 3 mm thick laminated sheet (PVC Copper

Wire, Avocab, Finolex, RR Cable brand only) and (Electrical

accessories i.e. Switches etc. CLIPSAL, MK, ANCHOR, TOYOMA

brand only) for concealed wiring. Light / Fan / Bell.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

75 Point wiring for Independent PLUG Point with 2-1.0 sq. mm & 2.00 Pt. 173.00

earthwire of 1.0 sq. mm (green) both are of ISI marked FR PVC

insulated multistrand copper wires in existing pipe duly erected,

complete with ISI marked 3 pin 6A socket and 6A Tissino Type

switch erected with earth continuity connection erected on polished

board block / metal / PVC box covered with 3 mm thick laminated

sheet (PVC Copper Wire, Avocab, Finolex, RR Cable brand only)

and (Electrical accessories i.e. Switches etc. CLIPSAL, MK,

ANCHOR, TOYOMA brand only) for concealed wiring.

76 Point wiring for looped PLUG point with complete with ISI marked 3 3.00 Pt. 35.00

pin 6A, socket and 6A tissino type ISI marked flush type single pole

switch erected with earth continuity connection erected on polished

wooden block /Metal/ PVC Box covered with 3 mm thick laminated

sheet for open / concealed wiring.

77 Mains with 1.1 KV grade FRPVC insulated ISI marked stranded 50.00 Rmt. 24.00

Copper conductor wire in existing pipe erected with 1.5 sq.mm

copper conductor FR PVC insulated stranded wire of green colour for

earth continuity of following size (PVC Copper Wire, Avocab, Finolex,

RR Cable brand only) (a) 2 wire 1.5 sq. mm.

78 Mains with 1.1 KV grade FR PVC insulated ISI marked stranded 40.00 Rmt. 31.00

Copper conductor wire in existing pipe erected with 1.5 sq.mm

copper conductor FR PVC insulated stranded wire of green colour for

earth continuity of following size (PVC Copper Wire, Avocab, Finolex,

RR Cable brand only) (b) 2 wire 2.5 sq.mm.

79 Providing and erecting PVC casing patty conforming to ISS complete 50.00 Rmt. 25.00

erected with necessary fitting with adhesive solution (i) for open

execution.

80 Providing and erecting PVC corrugated flexibal conduct with require 2.00 Rmt. 13.00

nos. of coupling, PVC bushes, check nuts etc. complete of following

size 20mm.

81 Providing & erecting PVC corrugated flexibal conduct with require 2.00 Rmt. 17.00

nos. of coupling, PVC bushes, check nuts etc. complete of following

size 25mm.

82 Backlite lamp holder. 8.00 No. 15.00

83 Electric Hum Free EME Socket type steps Fan Regulator. 2.00 No. 190.00

84 Providing & erecting Bulk head fitting with glass wire guard rubber 2.00 No. 39.00

gasket & porcelain holder suitable for 40 watt to 100 Watt lamp

suitable conduct entry to be erected as directed.

85 Supplying and erected approved make 1 x 40 watt. white stove 4.00 No. 347.00

enameled patti type type fluorescent fitting made of M.S. 0.8 mm

thick white on reflector side complete with heavy duty polyester

copper wound balast, lock type tube, starter, duly wired for use on

250 V. A.C. supply and erected if required on varnish P.W. block /

PVC block with lead wires & connection. Cat-III (CLIPSAL,

PIERLITE, PHILIPS, CROMPTON brand only) (a) Suitable for 1 tube

40 watt. 120 mt. Cat. III.

86 Approved make G.F. lamp 230 / 250 V. 40/60 Watt Cat-III. 6.00 No. 14.00

87 Approved make fluorescent tube 120 cms 36/40 Watt erected, if 4.00 No. 61.00

required. Cat-III.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

88 Providing & erecting decorative call bell Ting-Tong box type 250 V. 1.00 No. 60.00

complete erected on existing polished wooden block or 3 mm thick

laminated sheet.

89 Providing & erecting approved make ceiling fan with condenser A.C. 2.00 No. 1323.00

230 V. 50 Cys. 1200 mm sweep complete, canopy, regulator and

cms. Dowen rod erected on existing hook or clamp with 24/0.2 flat

core flexible wire with earthing with out regulator.

90 Supplying and erecting fan hook box of 10 mm M.S. Round bar 2.00 No. 33.00

grouted in RCC slab with making the site as original.

91 Providing & erecting 240 V. MCB double pole motor & including load 1.00 No. 337.00

(C curve) having 10 KA breaking capacity & conforms to IS:8828 in

existing box having following capacity. 40 Amp. Cat-II.

92 Providing & erecting sheet steel powder coated enclosure suitable for 1.00 No. 132.00

incorporating one / two nos. MCB (A) DP MCB.

93 For using salt and charcoal / coke as required for pipe type earthing. 1.00 No. 127.00

94 Cast iron earth plate size 30 x 30 x 0.35 cms hurried in specially 1.00 No. 390.00

prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip in

G.I. pipe 2 mtr. long with coupling and G.I. plug for earthing of switch

gear, conduct run of power plug etc.

95 GEB connection charges. 1.00 L.S. 7000.00

96 Demolition including stacking of serviceable materials and disposal 5.40 Cum 1030.81

of unserviceable materials with all lead and lift (i) R.C.C. work.

97 Demolition of brick work and stone masonry including stacking of 11.00 Cum 536.09

serviceable materials and disposal of unserviceable materials with all

lead and lift (ii) in cement mortar.

98 Dismantaling Doors, windows, ventilators etc. (wood or steel), 5.00 No. 244.98

shutters including Chowkhats, Architraves, holdfasts and other

attachment etc. complete and stacking them with all lead and lift. (ii)

Exceeding 3 Sq.m. in area.

99 Dismentaling tiled of stone floors laid in mortar including stacking of 38.42 Sq.m. 46.77

serviceable materials and disposal of unserviceable materials with all

lead and lift (i) in cement mortar.

Total Rs.

i.e. Rs. Nine lacs Ninety Seven thousand Six hundred Twenty Five and Seventy Five paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ___________________

In words ____________________ In words ____________________

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit for dismantalled materials of amount of Rs. 6314.78 must be recovered from 1st R.A. bill

of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Valia Bharuch Bharuch