Special Renovation to the EI work for improvement of illumination level to desired level incl S and F of Batteries for inverters for different wards toilets urinals etc of Berhampore Mental Hospital in the dist of Murshidabad.

Amount

Taken down, Disconnection & dismantling the Fluorescent Fittings form the original position with Co"s own tools & tackles for repairing incl.washing as per direction of EIC

Washing,cleaning the Fluorescent Fittings by wet clothe and complete set by soap water solution asper direction of EIC

Painting of Fluorescent light fittings with two coats of synthetic enamel paint (approved make) preferably with white colour per direction of EIC

S & F of 0.5 sqmm tinned copper hook wire (approx. length 2 mtr. For each fittings; make -- Approved make) incl. necy. Connector for internal connection of fluroscent fittings as per direction of EIC

S & F of 2*24/0.20 mm flexible copper wire of 1 mtr length from ceiling rosge to fittings

S&F Push type/ Rotary holder of fluroscent fittings (Philips/Anchor/approved make) as per sample as per direction of EIC

Supply & Fixing only carrier of Double fluorescent fittings (make-- Philips/ P.W.D. approved) as per sample as per direction of EIC

Supply & Fixing only carrier of Single fluorescent fittings (make-- Philips /P.W.D. approved) as per sample as per direction of EIC

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

S & F of 230V 4ft Single LED Tube light Model- 1200mm 18W865 T8-1-2100Lm Make-Philips

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 8 mtr

Supply & delivery of 230V 4ft twin LED light fittings complete with all accessories (Philips Cat No-TMC501 P 2 x TLED 22W P3242)with two 2X MAS LED TUBE 1200MM 18W865 T8-1-2100lm Make-Philips

Supply & delivery of 230V 4ft single LED light fittings complete with all allied accessories (Philips Cat No-TMC501 P 1x TLED 22W P3242)with two 1X MAS LED TUBE 1200MM 18W865 T8-1-2100 lm Make-Philips

S& D of 230v , 450MM Sweep 1360 rpm total metal construction wall fan (Make -ORIENT Cat- Wall Tornado-II)

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only wall fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Charges for Disconnecting & Dismantling the existing 1.6 kva microtek inverter with 2 nos 12v 150AH Batteries for shifting Medical Officer's rest room from ground floor to 1st floor of OPD building and re installation incl. making connection, necessary cleaning, minor servicing, topping up the batteries with distilĺed water as per direction of EIC.

Supply & Delivery of 230V 50Hz1200mm (48 inch) sweep AC ceiling fan complete with all accessories. blades, canopy, fork, rubber bush etc.striker ceiling fan with safty wire & P2/S3 Capacitor. [make-usha/Crompton/Orient].

S & D of 230V 50Hz 12 inch (300mm) sweep 1420 rpm Exhaust Fan Make- EPC Heavy duty

12 inch (300mm)

9 inch (230mm)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

12 inch (300mm) sweep

9inch (230mm) sweep

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For

Al 30 cm Exhaust fan

Al 23 cm Exhaust fan

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20mm size

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2x36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

S & D of 1.1kv Gr. 3.5 core 50 sqmm PVC Ar. Aluminium Cable (make- NICCO/GLOSTER/ CRYSTAL)

Laying of one No. cable above 35 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles without earthing attachment making holes etc. as necy., mending good damages and painting

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable 4Core as per GS.

3.5/4 core 50 sqmm

2 core 10sqmm

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Deliver 12V 200 AH lead acid battery (make Exide model inva tubular IT 750) incl cost of old damaged batteries as rplacement

S & Fixing 3 point ceiling rose (Ivory/white Make- Achor/Approved)

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Supply & Fixing Piano key type switch (Brandapproved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Painting of Steel Tubular Pole upto 9mtr lengths with two coats of Al paint over 1 coat of primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as to GS.

Supplying & Fixing GI/CI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

S & D of 72W LED street light fittings (Cat no-BRP 409 LEDCW072 MRFGS1 PSU GR) Make- PHILIPS incl. Al accessories.

S & D of DP isolator 63A (Simense)

S & D of DP isolator 63A (Legrand)

S & D of DP isolator 40A (Simense)

S & D of DP isolator 40A (Legrand)

S & D of SP MCB 6-32A (Legrand)

Supply and delivery of Driver for street light (72/70 w) (Make- Crompton/Philips)

S & D of 230v 11W LED lamp B22(Make - Philips/ Bajaj/Eqv)

Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 9watt LEDlamp complete set.

Fixing of LED Lamp/ LED tube lamp ( supply Departmentally) as to GS

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4way Enclosure (607715)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. Legrand 6-32A

M/S TAPAS SINGHA ROY

JOGMAYA ENGINEERING

ASIM KRISHNA MODAK