Greater Bareilly Yojana ke vibhinn tiraahon/chouraahon par 20 meter oonchai ki high mast light lagane evam 05 varsh ka anurakshan va sanchalan ka karya.

Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. (S.I. 21.3.1, PWD SHEDULE 2024) (at the rate of 396983 X 0.8475=336443.09)

LED Flood Light, powder coated pressure cast aluminium (System lumen efficacy ≥135 Im/Watt)supplying. Installation, Testing & Commissioning of Flood Light, powder  coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection  of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per  IEC 61000-3-2,  P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over  voltage  protection, EMIEMC as per CISPR-15, lenses for beam angle 30 deg- 120deg as per  the application and the project  requirement.,  suitable tilt able  fitting, life time  (LED, Driver & electrical circuitry) of  minimum 50000 Burning Hours  with 70% of  initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21- 11 report,  CCT 3000°K/  4000°K /  5700°K / 6500°K  (As per ANSI Bin)  SDCM(Standard Deviation  Colour Matching) <5, Maximum power  consumption  should not more than the  specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 Im/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge  as per  requirement.  (Thermal management: heat sink of  aluminium  housing such that LED  junction temperature shall not rise above 90°C). complete in all respect. as per D/Ich. Capacity-200 Walt (S.I. 8.17.5 CPWD SHEDULE 2025) cat.AAA (5504X0.755X0.97=4030.85 )

Supply and laying of almunium conductor PVC insulated aromoured served Sheathed cables 11 Volts grade of A depth of 750 mm below ground level over a caution of 75mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS Clamps etc. of suitable size or as directed by Engineer-Incharge, complete in all respect. the armouring of the cables shall be properly connected with the earth conductor by clamping etc. a- 35 sqm 3½ core UP PWD Schedule 2018 (Item No 501(k)

Supply and burring of Safe earthing electrode T-19, (Hot Dip Galvanized), Length upto 3000mm, Outer Dia 50 mm inner Dia 25mm, terminal Dia 12 mm, outer GI pipe of swg and inner GI Pipe of 12swg with Hot Dip Galvanized up to 100 micron filled with srystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing and lead of 25 mm X 3 mm G.I. strip, up to switch board (from apron to switch board, the cost of G.I. strip will be extra ) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P.P.W.D., & C.P.R.I. Certified SOR 725(B)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect 25A TPN UP PWD Schedule 2018 (Item No 807 (e) (ii)

S/F of "B" class of 100 mm dia G.I. pipe with M.S clamp nuts & bolt complete in all respect as per direction of E/I.SI No. 14.13.3 CPWD SCHEDULE 2024

Only For Operational Charge For One Year (0.50%) On Part-A

2nd Year (0.5%) Operation Charge On Part-A

3rd Year (.75%) Operation & Maintanance Charge On Part-A

4th Year (1%) Operation & Maintanance Charge On Part-A