Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹40.9 L
EMD Value
₹40,899
Closing Date
12 Jul 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Civil and Interior, Electrical, Fire-Fighting, Air-Conditioning System, Furniture etc.
NSL/CEO/SIDBI/NIT/2023/585~EW5d4856741701cabd0dfe1b28
NSL/CEO/SIDBI/NIT/2023/585
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹2,950
₹40,899
12 Jul 2023
4 Jul 2023
12 Jul 2023
4 Jul 2023
12 Jul 2023
Interior Fit out works in the office space of SIDBI-MOHALI (1700 Sqft)
Digitally signed by AMIT
1 Providing and fixing false ceiling with gypsum board and frame work made of special section from M.S. sheet and consisting of
angle cleat at 1200mm c/c, one flange fixed to ceiling with dash fastener 12.5mm dia x50mm long with 6mm dia bolt, other
flange of cleat fixed to the angle hanger of 25x10x0.50mm of required length with nut & bolt of required size and other end of
angle hanger fixed with intermediate
G.I. channel 45x15x0.9mm running at spacing of 1200mm c/c, including fixing of gypsum board to ceiling section and perimeter Sqm 93.00 1,450.00 1,34,850.00
channel including jointing and finishing to a flush finish of tapered and square edge of board with jointing compound jointing
tape, and also including the cost of making opening for light fitting, grill, diffuser, cut-out made
with frame of perimeter channel suitably fixed, all complete.
2 Providing and making partly glazed /partly panelled laminated partition with galvanized steel internal frame work with 11mm
MDF board on either face laminated using 1.0mm laminate in required pattern. Rates are inclusive of s/f 8 mm clear glass in
glazed portion with required moulding
2a Same as above but finishing of partition with 12 mm gypsum board on one side inplace of mdf and laminate.Rates are
3 Providing and fixing panelling with framing shall consist of GI Section on the wall. This framing would be covered by 11mm
4 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS
15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade.
DOOR & LAMINATION
5 Providing and fixing ISI marked flush door shutters 30mm thick conforming to IS : 2202 (Part I) decorative type, core of
block board construction with frame of 1st class hard wood. Sqm 3.90 3,450.00 13,455.00
6 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters
7 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position
8 Providing and fixing bright finished brass 100mm mortice lock with pair of handle /cylendrical lock with 6 levers
9 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS
: 3564, embossed on the body, door weight upto 35 kg and door width upto 700mm) with necessary accessories and
10 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as
and shade, with necessary screw etc. complete.
11 Providing & Fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density
protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including
cost of adhesive of approved quality.
12 Providing and fixing 12mm thick frameless toughened glass door with all required ss hardware fittings-Single Shutter size
13 Providing and fixing 16mm thick mineral fibre false ceiling tiles of size 595X595mm. The tiles should in true horizontal level
suspended on interlocking T-Grid of hot dipped all round galvanized iron comprising of main T runners of 15x32mm of length
3000mm, cross T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to
form grid module of size 600x600mm suspended from ceiling with adjuster of size 85x25x2mm, spaced at 1200mm centre to
centre along main ‘T’. The system should rest on periphery wall/partition with the help of GI perimeter wall angle to be fixed to
the wall with help of plastic rawl plug at 450mm centre to centre &
40mm long dry wall SS screw.
14 Providing & fixing Film on glasses of door & partition of selected design and colour all complete. Sqm 12.00 800.00 9,600.00
15 Providing and fixing Mettalic Logo of SIDBI behind public interface table including fixing of letters in hindi all complete.
16 Providing and fixing Zebra blind of approve colour fabric with all required powdercoated channel ,hardware material aluminium
clip ,pulling cord etc .all complete
17 P/F12 mm ply on external glazing portion for fixing of false
ceilingmembers i/c cutting ,wastage ,labour etc .all complete
18 Intensive cleaning of entire branch office premises with required material ,labour etc i/c all glass partition and its
19 S/F S.S patch lock and SS patch hinge for existing glass main doors which are damaged i/c removing and refixing of door.
Digitally signed by AMIT
S.no Item Description Unit Qty Rate Amount
Electrical work
Supplying, Laying, testing & commissioning of the
following size of XLPE Al. Conductor armoured
cables of 1.1KV grade on the surface of wall as required
DISTRIBUTION BOARDS
Supplying, installation, testing & commissioning of
following type wall mounted Horizontal TPN/SPN
distribution board of double door type design made
out of 16 gauge MS sheet with supplying and fixing
following accessories including painting,
interconnection, painting, earthing and labelling etc. as
Incoming 63Amp TPN MCB (10KA) - 1 No
Busbar 100 Amp TPN copper busbar - 1 Set
Outgoing 10/16/20/25 Amp SP MCB (10KA) - 18
Neutral links - 3 Nos (Separate for each phase)
Incoming 40Amp TPN MCB (10KA) - 1 No
Busbar 100 Amp TPN copper busbar - 1 Set
Outgoing 10/16/20/25 Amp SP MCB (10KA) - 18
Neutral links - 3 Nos (Separate for each phase)
Incoming 63Amp TPN MCB (10KA) - 1 No
Busbar 100 Amp TPN copper busbar - 1 Set
Outgoing 10/16/20/25 Amp SP MCB (10KA) -
Neutral links - 3 Nos
Wiring for switch controlled light point with
3x1.5Sqmm PVC insulated FRLS multistrand copper
conductor 1100 Volt grade wires in PVC
surface/recessed conduit with accessories and
6 including the cost of supplying and fixing 6Amp 240
Volt grid plate mounted switch with moulded cover
plate in zinc chromate passivated MS box, and costing
circuit wiring with 3x2.5sqmm 1100volt grade PVC
insulated FRLS Multistrand
Primaryconductor
Point wires, in PVC conduit complete Pts. 28.00 950.00 26,600.00
Digitally signed by AMIT
Wiring for 5pin 6A Light plug point with 3x1.5Sqmm Pts. 22.00 1,350.00 29,700.00
PVC insulated FRLS multistrand copper conductor
1100Volt grade wires in recessed FRLS PVC conduit
7 with accessories including the cost of providing & fixing
1 No. Modular type 3pin 6A socket outlet controlled by
6A switch in zinc chromate passivated MS box,
and circuit wiring with 3x2.5sqmm complete.
Wiring for following. 16A Socket controlled by 1No 16A Pts. 8.00 1,500.00 12,000.00
Switch with 3x2.5Sqmm PVC insulated FRLS multi
strand copper conductor 1100Volt grade wires in
8 recessed surface PVC conduit including the cost of
providing & fixing 1No Modular type 20A socket outlet
controlled by 1 No. 16A switch in zinc chromate
Wiring for following. 16 A Power plug point controlled Pts. 10.00 2,200.00 22,000.00
by 1No 20A MCB with 2 x2.5 +1x1.5 Sqmm PVC
9 insulated FRLS multi strand copper conductor 1100Volt
grade wire in PVC conduit
UPS WIRING A.C Point
Concealed 16A+6A, socket combined power point as Pts. 12.00 1,700.00 20,400.00
10 UPS Point comprising of –3 Nos of 6/16 A
Universal Socket & 1 No.16A switch.
TELEPHONE SYSTEM
Supply and fixing of RJ-11 modular Telephone Pts. 14.00 500.00 7,000.00
outlet with Modular Plate
Supply & fixing the 20 pair telephone tag block of Nos 1.00 2,000.00 2,000.00
16 SWG Krone telephone tag block
Supplying & laying the 2 pair telephone wire of Mts 300.00 65.00 19,500.00
PVC insulated in PVC conduit recessed in wall
COMPUTER DATA NETWORKING
Supply and fixing flush steel box computer outlet Nos 22.00 1,450.00 31,900.00
point RJ-45 and cat-6 data cable complete
FANS FIXTURES & LIGHTS
Supplying, installation with hanging support, testing
and commissioning of following light fixtures with
electronic Ballasts, Tubes, lamps, all fixing materials
including connecting wires etc. all complete as per the
directions of Engineer-in- charge (All LED Light Fixtures
should be covered with minimum one year onsite
Recessed LED panel light (L1) (600X600MM) LED Nos 14.00 2,750.00 38,500.00
36watt 6500K in false ceiling RC 370 B
Digitally signed by AMIT
Providing, laying, testing and commissioning of 'C' class Sqm 160.00 675.00 1,08,000.00
heavy duty MS pipes confirming to IS:3589
/IS:1239 including welding, fittings like Elbow, Tee,
Flange, Nut bolt, Gasket etc. and fixing pipes to
wall/ceiling with suitable clamps and painting with two
21 or more coats of synthetic enamel paint complete as
required. Also include the UL Flexible Drop Pipe and
Pendent Type Sprinklers. Rate also include s/f butterfly
valve in main line for controlling supply. Make H.D
/Tyco or equivalent
Providing, laying, testing and commissioning Smoke Sqm 160.00 325.00 52,000.00
Detector, Heat Sensors, Fire Panels, hooter etc. with all
22 necessary fitting and cabling
complete as directed. Apolo/Agni make
Digitally signed by AMIT
SITC Cassette fan coil unit (water cooled )
Supply Installation, Testing & Commissioning of modular type
Variable Refrigerant Flow/Variable Refrigerant Volume air cooled
Outdoor units suitable for cooling and heating, having all
hermetically sealed inverter type Scroll Compressor(s), minimum
two compressors for above 14 HP modules, microprocessor based
Controller, top discharge type condensing unit(s), with R 410 A
Refrigerant, vibration isolators, with suitable foundation etc.
complete as required. The unit shall deliver the rated capacity at
1 AHRI Conditions and work even at 50°C ambient temperature Per HP 18 16415.00 295470.00
without tripping. The unit shall be suitable to work on 400V +/-
10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with
first charge of the refrigerant and ready for use as required. The
COP at AHRI conditions shall not be less than 3.1 and IEER not less
Digitally signed by AMIT
Supply, installation, testing and commissioning of following
minimum capacity 4-way flow VRV/VRF Cassette Type Indoor
ceiling mounted unit equipped with synthetic washable media pre-
filter, fan section with low noise fan/dynamically balanced blower,
multispeed motor, coil section with DX Copper coil, electronic
expansion valve, outer cabinet, drain pump, grill, necessary
supports, vibration isolation, cord less remote control etc., suitable
for operation on single phase 230 V ± 10%, 50Hz AC supply,
complete, as required. The unit shall have automatic force shut
down provision in case of fire on receiving signal from BMS
System. The cooling capacity of indoor unit will be at air inlet
conditions of 27 Degree C DB and 19 Degree C WB temperature.
Supply, installation, testing and commissioning of following
minimum capacity VRV/VRF High wall type Indoor unit equipped
with washable synthetic media pre-filter, fan section with low
fan/dynamically balanced blower, multispeed motor, coil section
with DX copper coil, electronic expansion valve, outer cabinet, cord
less remote control, drain pan, necessary accessories etc., suitable
3 for operation on 230 V ± 10%, 50 Hz, single phase AC supply,
complete as required. The unit shall have automatic force shut
provision in case of fire on receiving signal from BMS System. The
cooling capacity of indoor unit will be at air inlet conditions of 27
Degree C DB and 19 Degree C WB temperature.
4 Refrigerant Piping
Supply, Installation, testing and commissioning including
vaccumiazation and Nitrogen testing of following nominal sizes of
soft/hard drawn copper refrigerant piping for VRV/VRF system,
complete with fittings, with suitable adjustable ring type hanger
supports, jointing/brazing including accessories, insulated with
XPLE Class-O tubular insulation/with Class-O closed cell
elastometric nitrile rubber tubular sleeves sections of specified
thickness as given below for Suction and Liquid lines, all
accessories as per specifications etc. as required :
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19
mm thick insulation
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19
mm thick insulation
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19
mm thick insulation
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with
19 mm thick insulation
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19
mm thick insulation
Lifting, Shifting, Supply, Installation, Testing & Commissioning of
Interconnecting "Y" & "T" Joints i.e. Refnet Joints/ Header with
5 Insulation for refrigearnt piping
Providing & laying of uPVC drain Pipe 25 mm to drain out the
water as per the site requirement
Digitally signed by AMIT
Supplying and drawing following sizes of FRLS PVC insulated
copper conductor, single core cable in the existing surface/
7 recessed steel/ PVC conduit as required.
Digitally signed by AMIT
Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned backrest and seating. Material &
subtype:Premium Leatherette, Colour & Colour Family:as per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte,
Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat cushion is made of
multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to
provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm.
Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-(W)590mm X (D)505mm X (H)1180mm - 1280mm.
The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back)
upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be
provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has
foam of density 30-35 (+/-2kg /m3) Dimensions The backrest has a foam of 28kg/m3.
Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X (H)990mm.A contemporary design with an all
black finish, . Material & subtype:Premium Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back
Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up of 12mm thk hot
pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.
Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm -
1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and
back) upholstered with leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/-
0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3.
Digitally signed by AMIT
Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x 1315mm(H). The seat cushion to be
upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade
- 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking mechanism and
pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke
of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC
with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest and head rest
Supplying and placing in position of 360 degrees revolving medium back chair. The breathable mesh back chair with cushioned fabric seat shall be
ergonomically design with adjustable lumbar back support . The chair shall be provisioned with adjustable armrest (Up-Down) with PP padding and
Adjustable Headrest(Can Adjust Movement). The chair shall be provided with self tension single locking mechanism and pneumatic height
adjustment which shall have stroke of 10.0 +/- 0.3 cm .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be
operated at 30kgs extension force.The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair
seat has foam of density 32-35 kg/m3.
Supplying and placing in position of Fix cantilever chair,the chair made of full mesh in black colour.. use of ply: 12 mm thick hot pressed bwr
plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat,
back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support.
Only seat size is 500mm(l)x 500mm(d)x 470mm(h) & the back size is 465mm(l)x 550mm(h) ,Seat max height is @ 470mm .Fixed cantilever chair
.base: chrome plated tubular frame of cantilever type..The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with
polyurethane foam, chair seat has foam of density 32-35 kg/m3.
8 Modular Workstation
Digitally signed by AMIT
Modular Workstation With Side Top with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm, Double
Raceway systems Skirting label and below the table top . lower tile both side laminated and upper tile inside side fabric, White
Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF board., and 3Drawer top
supported Pedestal unit Size 400W x 400D x 725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1-Frosty White, Laminate2 For
drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray. and White Tinted Glass
9 Linear Workstation
Supplying, and placing in position of linear workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with 2 mm thk PVC
edge banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors with Powder
coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation).
0.8 mm thk Single/Double metal powder coated raceway with Powder coting of 50 Micron below top for wiring.Vertical wire carrying pole with
powder coating 50 micron below top for wiring( Non- sharing workstation ). Also having a provision of ms perfoated sheet hanging modesty.
provision of glass divider rest on the "D" brackets on the table top between opposite seatings. All working or non working edges shall be provided
with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of pullout PVC keyboard tray and CPU
trolley for each seating. Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing
drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking arrangement
10 AGM Table
Main Table Dimension (L) 1650mm x (D) 750mm x (H) 750mm
Side Runer Dimension (L) 1050mm X (D) 450mm X (H) 750mm
Supplying, and placing in position of main Table as per Image/ drawing.The Table top are made out of 25mm thk prelam particle board with 2mm
thk pvc edge banding & side panel & modesty panel made up of 18mm thick pre-laminated particle board .The working edges shall be provided with
machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The table have a provision of free standing Side Storage
of size 1050mm L x 450mm D x 750mm Ht., Storage Top made out of 25mm thick pre laminated particle board and rest all storage to be made out
of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt
EVA glue. Storage having a provision of 3 drawer unit, two openable shutter with D shape handle & central locking arrangement.
11 DGM Table
Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm
overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm
Digitally signed by AMIT
Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of 25mm thick pre -laminated particle board
of approved shade. The working and non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall
be supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made out
of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of overall size:
1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter & one open storage
with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick
pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site requirement.
12 Medium Height Partition
Supplying and placing in position of sliding tile base modular Workstation as per photograph. Free standing partition height 1200mm and should be
minimum of 62-67mm thick. Partition inner frame is 1.0-1.2mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of
1mm thick. All Panels/trims shall be powder coated with 50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition. The
frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ Sqft 40 1400 56000
white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired
2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing.
The product should be as per above given specification under the guidance of project Engineer in charge.
13 Conference Table
Supplying and placing in position of conference table of required size as per image/drawing. The work surface top should be of thickness 42mm
top prelaminated particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm thick prelaminated particle & modesty
panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire carrier should be made from 0.6mm
thick CRCA & powder coated 40-50 microns. Also having a provision of 6 module flip top box & metal raceway for wire flow.
14 Pantry Table
Providing & Installation of Pantry table of size 1.83 m x 0.75m x 1.05m (ht) made out of 19mm thk. Commercial Board finished in Recon veneer
and DU Pont Coreanof approved shade as per design. The Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be
provided above table. One (1) number Drawer pedestal with 3 drawers to be provided under the table. nos. 1.00 25000.00 25,000
15 Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC nos. 10.00 2200.00 22,000
Digitally signed by AMIT
16 Openable Shutter storage
The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is made of 09mm thick MDF of approved shade. All
the edges of storage surface shall be provided with machine pressed imported PVC lipping glued with hot melt EVA glue free from any VOC with
free groove handle and suitable lock. All exposed area PVC edge lipping
Digitally signed by AMIT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT Tech interior.pdf
Tender Document
SCC.pdf
Tender Document
GCC upto amend4.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Mohali approved Layout.pdf
Tender Document
Forms.pdf
Tender Document
Approved make list.pdf
Tender Document
Sidbi Mohali Boq Final.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .