WBPWD/EE/BED/84/e-IT of 2019_20

Amount

Dismantaling of All old Fire panel, hooter, MCP, Deretors, Cables, etc and place it at the area provided by the Authority.

Supply, installation, testing & commissioning of EN Standard, VDS approved Addressable Multi-Sensor Detector (optical smoke as well as heat) with inbuilt / equal number of additional Isolator for each detector and integral LED status indicator with 360 degree viewing angle. Detector shall communicate 3 danger levels for differentiated alarm activation and high tolerance to dust,dirt, temperature fluctuations and air currents. Detector should have unquie address for communication and assigned through panel with Mounting Base as required. (Approved Make: Honeywell/ESSER/Bosch/Securiton) Brand approved by EIC

Supply, installation, testing & commissioning of EN Standard, VDS approved Inteliigent addressable manual call point with inbuilt / equal number of additional Isolator for each manual call point suitable for flush or surface mounting, call point shall include test key feature without removing the glass with extra acceesories as required. (Approved Make: Honeywell/ESSER/Bosch/Securiton) Brand approved by EIC

Supply, installation, testing & commissioning of EN Standard, VDS approved fire USB Kit for configuration as fail safe operation. (Approved Make: Honeywell/ESSER/Bosch/Securiton) Brand approved by EIC

Supply, Installation,Testing & Commisioning of EN standard, VDS Approved Microprocessor based 2 Loops expandable up to minimum 4 Loops, fire alarm control panel fully networkable (Vender should consider Network card for panel to panel networking) with each loop capable of taking atleast 125 devices and each loop should be connected to a dedicated loop card, 1/4 VGA display character alpha-numeric liquid crystal display.The panel shall be soft addressable type. The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have in built rectifier, provision for external & internal printer (if required),Loop cards, L C D unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, having minimum 1000 event memory, integral SMF lead acid batteries with sealed cells of 24 V / 12 V with integral battery charger complete as required and as per specification. (Approved Make: Honeywell/ESSER/Bosch/ Securiton) Brand approved by EIC

Supply & Installation of Batteries for Main FACP, 7AH - 12 Volt DC. (Make :- Exide/Amaron) Brand approved by EIC

Supply & Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop). (Make :- Finolex/Havells/Gloster) Brand approved by EIC

Supply & Laying of 20 mm NB PVC rigid conduit pipe on the surface of the wall. (Make:- Precisson-Medium)

Extra Arrangement for hiring of testing Instrument and testing of fire system after Installation by Fire Inspector.

SITC of 5 Watt 2 way wall mount speaker(Meke-Sonodyne /Bose/QSC) Brand approved by EIC

SITC of 120W Mixer amplifier with 4 Line inputs(Make-Australian Monitor/QSC/Bose) Brand approved by EIC

SITC of Mike for announcement (Make-SENNHEISER-E935/Bosch/QSC) Brand approved by EIC

Supply and laying of Speaker Cable in pvc rigid conduit for connectivity

L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.

PRAKASH ELECTRICALS

MIB ENGINEERING AND CONSULTANTS PVT LTD