mahathmagandhi nregs construction of anganwadi ward 17

Amount

construction of anganwadi

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

24mm thick factory made shutters with stiles, rails and pannels of PVC extruded section in white, gray or wooden finish

Plasticizer/ Super plasticizer

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Laterite stone of size 35x20x20cm

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Pumbing charge of concrete including higher charges of pumb, piping work and acceries ect…

Bright finished or black enamiled miled steel butt inches 75x47x1.70mm

Multy surface paint

Special primer (C.W)

Ceramic glaced tiles first quality minimum thicknes 5mm in all colers shades and disigns exempt burgundy, bottele green black

Miled steel sheet for tanks

Iron pintels including welded pin

Second class kail wood in planks

Second class kail wood in scantling

Safeda ballies 125 mm diameter

Stone Aggregate(single size): 10 mm nominal size

laterate stone of size 40x20x15cm

Twisted steel/deformed bars

Fine sand (zone IV)

Deharadun white lime

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Pink primer (for wood)

Mild steel round bar above 12mm dia

Flats up to 10 mm in thickness

Mild steel sheets with bolts and nuts to rest on pintels

Mild steel hooks

Synthetic enamel paint in black or chocolate shade

Ceramic glazed tile first quality 300x300mm in all shades designs exept white ,ivory, fume red brown etc…

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Polyethylene water storage tank with cover and suitable locking arrangemnet

Mild steel tubes hot finished welded type

Welding by electric plant

GI trafford profile sheet 0.35mm thick

Bitumen washer

G.I Limpet washer

Galvanised steel J or L hooks 8 mm dia

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Brass bib-cock-15 mm dia

Brass stop-cock 15 mm dia

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Bidder Name

MUHAMMEDALI