Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC A 29 SAMRAT PALACE GARH ROAD MEERUT UP 250001 | MEERUT | UTTAR PRADESH | 250001 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹20.9 L+₹36,478.50 (1.78%)Rejected-Finance 5D 32B GALI NO 8 VISHNU GARDEN TILAK NAGAR WEST DELHI 110018 | DELHI | WEST DELHI | DELHI | 110018 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹21.4 L+₹91,705.50 (4.47%)Rejected-Finance 61 2 JAURASI LANDHAURA HARIDWAR 247664 UK | HARIDWAR | UTTARAKHAND | 247664 | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹22.0 L+₹1.5 L (7.23%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹22.4 L+₹1.9 L (9.43%)Rejected-Finance INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
19 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
CERTAIN REPAIR TO JCOs/ OR MD ACCN IN TANK AREA, INDIRA COLONY, MAP AREA, 14 INF DIV HQ, HRDC, STN HQ AND VARIOUS LOCATIONS UNDER AGE B/R-II AT GE CLEMENT TOWN, DEHRADUN
2024_MES_662495_1
GE /CLT / of 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Class D Cat a(i)
7 documents required · 7 mandatory
₹500
Yes
GE Clement Town
₹70,000
Yes
4 Jan 2025
27 Jun 2024
26 Jul 2024
27 Jun 2024
19 Jul 2024
12 Jul 2024
Amount
Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified
S&F 6 mm thick cement, corrugated or semicorrugated sheets as in roof covering, walls etc fixed to steel/timber purlines rafters etc fixed with coach screws complete all as specified and directed
Demolition of cement cocrete any description and in any position not otherwise specifically provided for complete all as specified and directed
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed
Dismantling timber as as in fillets rails posts rafter etc under 40 Sqcm in section in any position unframed work complete all as specified and directed
M&L Plain fillets 2nd class hardwood square, rectangular or triangular in section, clean sawn, secured with nails or brads Exc 13 & n exc 25 sq cm complete all as specified and directed
M&L for GI snap grid framework including 4mm thick E-boards for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces duly powder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c. Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c. Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c. To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheet of length 600mm is placed inside the module of size 1200x600mm including suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm as in riser of steps, skirting, dado and pillar etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles with and including over 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and directed
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm (300x300mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed
M&L for Machine cut Kota stone slab flooring 16-18 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.
M&L for Kota stone slab 16-18 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed
M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified
M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified
M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper including a coat of primer of approved tint over a coat of wall care putty to make the surface smooth complete all as specified and directed
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over a layer of wall care putty to make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge
M&L for preparation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as directed by Engineer-in-charge
M&L for complete removal of old surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as directed by Engineer-in-charge
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed
Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed
S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x 25mm. Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flat beading for provision of guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.36mm dia of wire and 1.40mm aperture. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm alaround except runner portion complete all as specified and directed
S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified.
S&F second class timber framed wrought and framed hard-wood clean sawn in scantlings complete all as specified and directed.
S&F 30mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc divided in to square with plain and mitred beads and rebated sash bars any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed.
S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate
S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled
S&F 200mm long stainless steel barrel tower bolts all as specified
S&F 150mm size stainless steel handles all as specified
M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified
M&L for preperation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed
S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified
S&F 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified
Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed
S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified
S&F in repair triple layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.
S&F 20mm bore gun metel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified
S &F vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified.(excluding cost of flush tank)
S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified.
S&F Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.
Supply & Fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
M&L Urinal fitted with inbuilt sensor first quality chinaware of size 610x390x370 mm fixed to wall including chromium plated brass bottle trap fixed to wall complete all as specified.
M&L for reinforced precast cement concrete (factory made) 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes /drain covers etc), shelves and similar articles (shape and size as directed) with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie.
S&F MS work as in doors or gates, water staging, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed by Engr-in-Charge
M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed
S&F 20mm dia MS drapery rod, fancy type, stainless steel with steel fancy knobs and brackets, fixed in any length complete all as specified and directed
S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall/floor and trenches complete all as specified and directed.
S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall/floor and trenches complete all as specified and directed.
S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed.
S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed
S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing
S&F in repair 18 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with stainless steel screws ans solvent cement/ adhesive to make Cupboard/Kitchen back and sides complete as per manufacturer’s instructions complete all as specified and directed
S&F in repair 6 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with stainless steel screws ans solvent cement/ adhesive to make Cupboard/Kitchen back and sides complete as per manufacturer’s instructions complete all as specified and directed
S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws all as specified and as directed
S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position all as specified
M&L for 4mm thick polycarbonate sheet transparent thermoplastic with carbonate strong quality fixed to existing frame work with nut bolts as in dome fixed b/w irom frame work with screws or nut bolts complete all as specifed.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
ANANYA CONSTRUCTION CO. (BID ID -3063214)
IRFANAHMAD CONTRACTOR (BID ID -3066771)
Gupta Enterprises (BID ID -3067448)
M/s RK ENTERPRISES (BID ID -3067570)
SWASTIKA BUILDERS (BID ID -3067485)
M/S MANISH KUAMR SINGH (BID ID -3067655)
RADHA ENTERPRISES (BID ID -3063088)
V R Associates (BID ID -3067035)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .