Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹24.3 LAccepted-AOC VILL DEPOPARA BINNAGURI PO BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹25.9 L+₹34,770 (1.36%)Rejected-Finance GOKUL APARTMENT PANJABIPARA DISTT JALPAIGURI SILIGURI 734401 WB | DARJEELING | WEST BENGAL | 734401 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹26.1 L+₹53,351.20 (2.08%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹28.9 L+₹3.3 L (12.9%)Rejected-Finance | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹29.3 L+₹3.7 L (14.5%)Rejected-Finance BIRPARA LANKA ROAD PO BIRPARA DISTT JALPAIGURI PIN 735204 | BIRPARA | JALPAIGURI | WEST BENGAL | 735204 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
REPAIR AND MAINTENANCE OF JOINERY AND CONNECTING WORKS IN MD ACCN IN NORTH ZONE UNDER GE NORTH BINNAGURI
2023_MES_598989_1
NIT No. 8701 / 19 / 2023-24 / 02 / E8
Open Tender
Civil Works
Item Rate
BINNAGURI
Class D Category a (i)
8 documents required · 8 mandatory
₹500
Yes
GE NORTH BINNAGURI
₹60,000
12 Jul 2023
27 May 2023
26 Jun 2023
27 May 2023
24 Jun 2023
10 Jun 2023
Amount
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each including building hardwares and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.
Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each including building hardwares and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm each but n.exc 2 Sqm each including building hardwares and removing from the site complete all as specified and as directed.
S&F for pressed steel frames for doors with one or more rebates including supply & fixing of necessary lugs, hinges, lock strike plate, etc, complete, size of frame 125 x 60mm including one shop coat of priming complete all as specified and as directed.
S&F for pressed steel frames for doors with one or more rebates including supply & fixing of necessary lugs, hinges, lock strike plate, etc, complete, size of frame 105 x60 mm including one shop coat of priming complete all as specified and as directed.
S&F 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed.
S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 and fitted to chowkats complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and as directed.
S&F of Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and as directed.
Easing of door shutters (area n exc 2.00 sqm) for properly closing/opening, tighting of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc with out taking down complete all as specified and as directed.
Refixing of shutter exc 1 Sqm but n.exc 2 Sqm after necessary repairs in the same opening including taking down complete all as specified and as directed.
M&L in repair for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
M & L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gauge thickness throughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes. The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minimum 4 nos of screws to be provided for each vertical member and minimum 2 nos of screws to be provided to the horizontal member etc. complete all as specified and directed.
M & L for providing & fixing factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certified company. Door should be water proof, turmite proof, fire resistant and having good screw holding capacity complete all as specified and directed.
M&L in repair for providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVC sandwich panel with 1mm thick plain PVC sheet on both sides suitably fixed in complete all as specified and directed.
Material and labour for 2nd class hardwood n.exc 3 sqcm plain fillets, rectangular in section clean sawn, secured with nails or beads and necessary fixing arrangement complete all as specified and directed.
S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
S & F Hasp and staple, Aluminium anodised of size 125 mm, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F 100 mm butt hinges stainless steel complete all as specified and directed.
Supply & fixing aluminium anodised extruded fabricated type handle 150mm long complete all as specified and as directed.
S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule.
All as per Item No 24 above here-in-before but with single shutter of glazed/wire gauged shutter including one shop coat anti-corrosive zinc chrome primer complete all as specified and as directed.
S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars including taking down of old steel ventilators of any size complete all as specified and as directed. Ref:- Drg No CESZ/2018/TD-07 Sheet 1/3 to 3/3. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule.
Dismantling expanded metal,(weight n exc 4.00 kg/Sqm) any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; fixed type window frame , door chowkat, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736)
S&F aluminium anodized partition wall or fixed type window/ventilator made out of aluminium anodized standard hollow section 100x40x1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board , interior grade prelaminated one side with decorative choice lamination & other side balancing light grey lamination including taking down of old wooden partition complete all as specified and directed by engineer-in-charge.
S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (section No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and as directed.
M&L for cleaning/washing of new pre-primed steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed..
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required all complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M&L brickwork with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.
Description all as per Item No. 44 above but without bricks complete all as Specified. ( Note The serviceable bricks obtain from demolition shall be reused.)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors/skirting etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed.
S&F for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed
Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface 300x600x7mm/450x350x7mm thick of size set and jointed in neat cement slurry and pointed white or colour cement to match as specified as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4 complete all as specified as directed.
M&L for 15 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in Cement mortar complete all as specified as directed.
S&F in repair 25mm dia PVC coated MS curtain rod with require brackets, decorative type on ends with teak finish appearance complete all as specified as directed.
Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under relevant item of this schedule.
M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) finished even and fair complete all as specified and as directed.
M&L for rendering 15 mm thick plastering in Cement mortar (1:6) on fair/unfair faces of brick masonry finished even and fair complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified as directed.
S&F 150 mm MS ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden chowkats or welded to angle iron door frames complete all as specified as directed.
S&F small articles such as door stoppers etc of IInd class Hardwood Including of all necessary labour area not exc 200 cu cm each complete all as specified as directed.
S & F rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to avoid entry of insects, dust etc complete all as specified as directed.
M&L for preparation of newly wall plastered surfaces of wall and applying three coats of white wash to match the existing colour complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of Colour wash over a coat of white wash to match the existing colour complete all as specified as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coat of acrylic distemper over a coat of primer complete all as specified as directed.
M&L for preparation of old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper complete all as specified as directed.
M&L for preparation of old surface of ceiling shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified as directed.
ANIL ENGINEERING CO
samrat saw mill and joinery workshop
M/S S.K.DAS
S.N. GHOSH AND CO.
SHRI PRADEEP PARIK
M/S SINHA ENTERPRISE
M/s. MD IRSHAD
R K AGARWAL
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .