c/o Patrolling Hut at Plachak wildlife Range Uhl at Bir District Kangra under Wild Life Division Hamirpur during 2025-26

Earth cutting in earth work and disposal of excavated earth upto a lead of 20 mtrs.

Pick & Jumper Work

Dry Stone masnory (uncourse/brought to course) in foundation & plinth, walls, retaining walls, parapet walls, breast walls and abutment of culvert etc.

Squared rubble masnory (HDCR) coursed with hard stone of approved quality in foundation & plinth of walls, R/walls, b/walls and abutment of culverts etc. including dressing of stone in mud mortar

Wood Work in rames of door window clerestory window and other frames wrought framed and fixed in position in first Deodar wood/Kail or Chil wood.

Preperation and fixing of 25mm to 40mm thick panelled glazed or paneled & glazed shutters for cup board etc. i/c fixing of plano-type or black enameled iron hinges in 1st class deodar/kail wood.

Wood work in trusses, purlins, rafter, post, plates, wall plates and the like wrought framed hoisted annd fixed in position.

Roofing corrugated GI sheet roofing 80mm to 60mm fixed with J or l hook 19mm dia GI limpet & bitumen washer complete

Roofing corrugated GI sheet roofing 80mm to 60mm fixed with J or l hook 19mm dia GI limpet & bitumen washer complete

Wood work in frames of false ceiling partition etc. and fixed in position in first class deodar/kail wood

Preperation and fixing of wooden plank ceiling with butt jointing and wood screws (fream work and cover fillets to be measured and paid seperately) 12mm to 20mm thick of deodar & kail wood.

planks flooring 2.5cm to 5cm thick tongued 7 grooved i/c fixing with screws to base wooden freame (base frea to be paid seperately)

Ceiling of tree ID 152 cm and above Conifer nos. of trees

Logging and squaring by hand sawing (quantity same as item No. 4 + 6 + 9)

Conversion of logs into sleepers & scants by hand sawing (quantity same as item No. 13)

Conversion of sleepers into planks of all size by hand sawing (sleeper 0.04 cum/rmt = 23.89/0.04)

Conversion of sleepers into planks of all size by hand sawing (quantity same as item No. 5 + 10 + 11)

Breaking of loose stone (quantity same as item No.2 + 3)

Dressing of stone for face work (HDCR) (quantity same as item No.3)

Collection of loose stone (Not required) [quantity same as itme No. 2 + 3]

Carriage of materials by manual labour including loading and stacking of excavated rock (quantity same as item no. 19) 1km for site

Carriage of materials by manual labour including loading and stacking of Timber (quantity same as item no. 14) 2km for site

Carriage of materials by manual labour including loading and stacking of steel including C.G.I and asbestos (quantity same as item no. 7) 6km from site

Fixing anodized aluminium sliding door bolt anodized tranparent or dyed to required colour and shape with bolt and nuts screws etc.complete 300x16mm or 250x16mm

Fixing MS sheet storage tank welded all around complete with 40mm nominal bore galvanized mild steel scour tube with fitting 25mm nominal bore galvanized mild steel over-flow tube with fitting amd mosquito proof coupling of approved munipal design. 15mm nominal bore ball valve and mosquito proof galvanized mild steel cover with locking arrangement including providing pads in sizes as per required foe inlet and outlet tubes, inside painting with a primer coat of red lead & three coats of bitumenous paint including housing upto a height of 10 meters above ground level. 1080 ltrs net capacity storage tank of 2.00mm thick M.S. Sheet.

Providing and fixing sand cast/cast iron spun spigot and socket soil waste and ventilatin pipe (lead chaulked joints to be measured and paid for seperately 100mm nominal size)

roviding and fixing sand cast/cast iron spun spigot fitting and accessories: bands of required degree and radius: - with oval access door insertion rubber washer 2mm thick/ plain bends with bolt and nuts complete 100mm nominal size

Providing and fixig cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost ofcutting and making goods the wells and floors: 75mm diameter

Providing and fixing vitreous China wash, down water closet (Europen type W.C. pan) with integral P or S trap including joining the trap with soil pipe in cement mortar 1:1 (1cement : 1 sand) (seat and cover to be measured and paid seperately) Anglo Indian (universal Closet)

Providing and fixing 10.0/12.50/15.00 liters vitreous China low level flushing cistern with a pair of C.I. or mild steel barakets, complete with fitting such as lead value less syphon. 15mm nominal size brass ball valve with polythebe flot. CP brass handle unions and coupling for connection with inlet, outlet and overflow pipe 40mm dia C.P. flush bend including cutting hole in walls and making good the same and connecting the flush bend with cistern and closet (over flow) pipe to be measured and paid seperately. 10.00/12/50 litres capacity

Providing and fixing plastic scat (solid/ hollow type) and cover for wash down water loset with C.P. brass hinges and ruber buffers: White plastic seat and cover

Providing and fixing vitreous China wash,basin with single hole for pillar tap with C.I. or M.S. Brakets painted white including cutting hole and making good the same but excluding fitting: Flat back 630mm x 450mm.

Providing and fixing vitreous Chins Padestal for wash basin complete recessed at the back for the reception o pipe and fitting

Providing and Fixing kitchen sink with C.I. or M.S. bracket painted white including cutting holes in walls and making good the same but excluding fittings: white glased fire clay marbal chip & vitreous chin 600mm x 450mm x 150mm.

Providing and Fixing brass bib tap (superior or heavy type): 15mm dia with Aerator, sparrow without acrator sparrow with acrator with house attachment Long nose, long body & with swinging spout top bottom outlet.

Providing and Fixing brass stop corcks 15mm dia

Fixing of rolloing shutter of approved make of 80mm x 1.25mm M.S. laths interlocked togather through their entire length and joined together at the end locks rounded on specially designed pipe shaft with brakets side guides and arrangements for inside and out side locking with push pull operation complete but excluding the cost of the top over and spring.

Carriage of materials by manual labour including laoding and stacking of steel including C.G.I and asbestos (Quantity same as item No.7 & 39) 6km from site

Add 166.66% on HPSR 2012-13