CERTAIN REWIRING AND REPLACEMENT OF UNSERVICEABLE FITTING AND MAINT OF CEILING / PEDESTAL FAN / WALL MOUNTED FAN/ EXHAUST FAN / FLAME PROOF FAN IN TECH AREA AT AF STN JODHPUR

Amount

Taking down carefully copper/aluminium point wiring light, fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe costudy or for taking credit and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes Complete all as specified and directed by Engineer-in-Charge.

Taking down Sub main wiring any type any size Complete all as specified and directed by Engineer-in-Charge.

Material & labour for surface point wiring for One light / fan/ exhaust fan point controlled by one switch 5 Amp, SP, one way 240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including 20mm dia medium grade rigid PVC surface conduit (ISI marked) with all accessories including surface sheet steel terminal / CI box with 3 mm thick hylam / masonite sheet top cover including 1.5 sqmm size PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly, including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified & directed by Engineer-in-Charge.

All as per item No 4.00 above but one 5 Amp 3 pin socket outlet on independent board with other switches.

All as per item No 4.00 above but for Call bell controled by one bell push button in independent board

All as per item No 4.00 above but for light point controled by two switches

Material & labour for point wiring for one 3 pin socket outlet 15 Amp multi purpose independent point controlled by 15 Amp switch, single pole, one way, 240 Volts & Socket. SP, one way 240 volts, with 2.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including surface PVC casing caping (ISI marked) with all accessories including surface/ concealed sheet steel terminal/CI box with 3mm thick hylam/masonite sheet top including 2.5 sqmm size FRLS PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring for One light / fan point controlled by one switch 5 Amp, SP, one way 240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and inciuding medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc including 1.5 sqmm size PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly complete all as specified & directed by Engineer-in-Charge.

All as per item No 9.00 above but for one 5 pin 5 amps socket outlet on the independent board.

All as per item No 9.00 above but for one 3 pin 5 amps socket outlet on the same board with other switches

All as per item No 9.00 above but for Call bell controled by one bell push button in independent board

Material & labour for point wiring for one 3 pin socket outlet 15 Amp multi purpose independent point controlled by 15 Amp switch, single pole, one way, 240 Volts & Socket. SP, one way 240 volts, with 2.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and inciuding medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc including 2.5 sqmm size FRLS PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

Taking down carefully flame proof copper /aluminum point wiring (light,fan,socket or power) complete, with wiring acessories such as bend boards Elbows only, ceiling fittings etc and removing material & depositing to MES store yard all as directed and making good disturebed surfaces walls floors etc complete all as specified and directed by Engineer-in-Charge. Note :- Dismantling of flame proof switches, Light fittings shall be measured and paid seperatly under relevant items of BOQ.

Material and labour for flame proof point wiring for one light point controlled by one flame proof swicth with single core 1100 volts 1.5 sqmm size PVC insulated PVC unsheathed stranded copper conductor using color code drawn through and including ERW steel conduit 19/20 mm dia with flame proof accessories complete all as specified in and including 1.5 sqmm PVC insulated PVC unsheathed copper conductor in cable for continuous earth continuty conductor by using green colour to comman earth and connecting to earth point and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

Material and labour for flame proof point wiring for one fan point controlled by one flame proof swicth with single core 1100 volts 1.5 sqmm size PVC insulated PVC unsheathed stranded copper conductor using color code drawn through and including ERW steel conduit 19/20 mm dia with flame proof accessories complete all as specified in and including 1.5 sqmm PVC insulated PVC unsheathed copper conductor in cable for continuous earth continuty conductor by using green colour to comman earth and connecting to earth point and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No 15 here in before but for one 16 Amp flame proof independent outlet point for power by using 2.5 sqmm PVC insulated unsheathed copper complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No 15 here in before but for 3 phase 4 wire for 5 pin switch socket 40 Amp TPN +E using 4 sqmm PVC insulated unsheathed copper conductor multistranded cable including 1.5 sqm PVC insulated unsheathed copper conductor Green colour cable as earth continuity conductor connected to common earth & coneecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

Material & labour in replacement of flame proof /weather proof MCB DB Double door type made out of LM-6 metal alloy of 8 way SPN with 01 no 40 amp SPN on incoming and 06 Nos of SP MCB on outgoing with 04 Nos of 3/4 " entry for cable, with necessary cable glands complete all as specified and directed by the Engineer in Charge.

Supply & fixing in replacement of flame proof control gear box IP-65 high way light fitting of capacity 1x150 watt with MH Lamp complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof 1x20 watt 4 feet long LED tube light fitting of capacity 1x20/16watt including LED lamp complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof /weather proof rotary switch on/off type 16 Amp direct entry complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof flexible/non flexible steel conduit for flame proof point wiring fixing on wall with all accessories complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs switch piano 5 amps flush type single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs switch piano 5 amps flush type single pole two way complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs switch piano 16 amps flush type single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs socket outlet flush type 5 pin 6 amps complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs socket outlet 2 in 1, 5 pin 16 amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs bell push button flush type 5 Amps complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular plate switches 6 amps single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular plate socketes outlet 6 amps 5 pin complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular plate switches 16 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular plate socket 6-16 Amps 3 pin combined shuttered complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular step fan Speed regulator 5 steps complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular white cover plate with frame 12 modular complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs Flush metal boxes 12 modular size 8'' x 6'' complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular white cover plate with frame 6 modular complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs Flush metal boxes 6 modular size 8'' x 3'' complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs modular white cover plate with frame 3 modular complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs Flush metal boxes 3 modular size 4'' x 3'' complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs of ding dong bell AC 230 V single pole complete all as specified and directed by Engineer-in-Charge.

Supply & fixing Buzzer AC 230 V single pole complete all as specified and directed by Engineer-in-Charge.

Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 2.5 sqmm 1100 volt grade (ISI marked ) drawn through and including non metalic PVC surface conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories all fixed, with one 2.5 Sqmm single core multi stranded copper conductor FRLS as earth continuity to common earth doly as earth wire complete all as specified and directed by the Engineer in Charge. Note : Two runs of main wire and one run of earth wire & casing shall be measured and paid as one length.

Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 4 sqmm 1100 volt grade (ISI marked ) drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories all fixed concealed on wall and surface on ceiling, with one 4 Sqmm single core multi stranded copper conductor FRLS as earth continuity to common earth doly as earth wire complete all as specified and directed by the Engineer in Charge. Note : Two runs of main wire and one run of earth wire & casing shall be measured and paid as one length.

Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 6 sqmm 1100 volt grade (ISI marked ) drawn through and including non metalic PVC surface conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories all fixed , with one 6 Sqmm single core multi stranded copper conductor FRLS as earth continuity to common earth doly as earth wire complete all as specified and directed by the Engineer in Charge. Note : Two runs of main wire and one run of earth wire & casing shall be measured and paid as one length.

Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 10 sqmm 1100 volt grade (ISI marked ) drawn through and including non metalic PVC surface conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories all fixed, with one 10 Sqmm single core multi stranded copper conductor FRLS as earth continuity to common earth doly as earth wire complete all as specified and directed by the Engineer in Charge. Note : Two runs of main wire and one run of earth wire & casing shall be measured and paid as one length.

Supply & fixing in repairs MCB SP 240 Volts, 50Hz, 10 kA, C series, conforming to IS 8828 of rating 6 to 32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs MCB SPN 240 Volts, 50Hz, 10 kA, B series, conforming to IS 8828 of rating 40 Amps complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs MCB Four Pole, 240/415 Volts, 50Hz, C series, 10 kA, conforming to IS 8828 of rating 80 Amps complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs MCB Four Pole, 240/415 Volts, 50Hz, C series, 10 kA, conforming to IS 8828 of rating 100 Amps complete all as specified and directed by Engineer-in-Charge.

Material and Labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for cocealed water tubing or consealed conduit wiring etc.and making good, cutting not not exceeding 10 cm girth complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs Steped type electronic fan regulator flash type on the existing phenolic laminated sheet etc suitable for 240 volt complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing in repairs ceiling rose surface bakelite 65 mm x 50mm, two to three terminals ISI (Marked) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 415 volt including MCB 20 amps complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs 1100 volt grade heavy duty electric power cable PVC insulated Aluminium conductor screwed with inner seathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1metre apart including 4 mm suspension wire with one twin core cable flat circulator 10 sqmm solid conductor complete all as specified and directed by Engineer in Charge.

Supply & fixing factory made MCB Distribution Board SPN 8 way 240 volt with double door, IP - 43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar with MCB SPN ‘C’ curve type 40 Amps- 01 No and MCB SP ‘C’ curve type 6 to 32 Amps- 06 Nos fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing factory made MCCB Distribution Board VTPN 4 way 415 volt with double door, IP-43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar including MCB TPN ‘C’ curve type 63 Amps - 01 No and MCB SP ‘C’ curve type 40 Amps-12 Nos fixed in wall/concealed in wall complete and making good disturbed surfaces of wall, floor etc including electric wire connection complete all as specified and directed by Engineer-in-Charge.

Supply & fixing factory made MCCB Distribution Board TPN 12 way 415 volt with double door, IP - 54 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar fixed in wall/concealed in wall complete and making good disturbed surfaces of wall, floor etc including electric wire connection complete all as specified and directed by Engineer-in-Charge.

Supply & fixing factory made MCCB Distribution Board TPN 8 way 415 volt with double door, IP - 54 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar fixed in wall/concealed in wall complete and making good disturbed surfaces of wall, floor etc including electric wire connection complete all as specified and directed by Engineer-in-Charge.

Supply & fixing factory made MCB Distribution Board SPN 12 way 240 volt with double door, IP-43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar with MCB SPN ‘C’ curve type 40 Amps- 01 No. and MCB SP ‘C’ curve type 6 to 32 Amps- 10 Nos fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing factory made MCB Distribution Board SPN 6 way 240 volt with double door, IP-43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar with MCB SPN ‘C’ curve type 40 Amps- 01 No and MCB SP ‘C’ curve type 6 to 32 Amps- 4 Nos fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed by Engineer-in-Charge.

Taking down carefully and opening, dismantling of ceiling fans 48" (1200 mm) sweep cutting and taking out old burnt/damaged winding/material by any means and material and labour for re-winding the same with supper enamelled copper wire of existing/same SWG including all insulating material all as required as per standard practice, varnishing the same and drying, cleaning fan with recommended quality grease/oil, re-assembling and refixing including replacement of unserviceable other parts, clamps, canopy, capacitor provision of PVC copper twisted conductor three core of size 0.5 sqmm of required length and testing complete all as specified and directed by Engr-in-charge. Note :- Spare parts shall be measured and paid seperately under respective items of BOQ.

All as per item No 62.00 above but ceiling fan of 56" 1400 mm sweep complete.

All as per item No 62.00 above but for Exhaust fan flame proof/with out flame proof of 230 mm sweep complete.

All as per item No 62.00 above but for Exhaust fan flame proof/with out flame proof of 300 mm sweep complete.

All as per item No 62.00 above but for Exhaust fan flame proof/with out flame proof of 450 mm sweep complete.

All as per item No 62.00 above but wall mounting fan of 400 mm (16") sweep complete.

All as per item No 62.00 above but pedestal fans of 600 mm (24") Sweep complete.

All as per item No 62.00 above but pedestal fans of 400 mm (16") Sweep complete.

All as per item No 62.00 above but industrial air circulator fans of any sizes complete.

Supply only Gun metal bush of ceiling fans any type or any sweep including cutting of grooves for fixing of bearing instead of bush any type/any size complete all as specified and directed by the Engineer in Charge.

Supply only ball bearing suitable for ceiling fan of 1200 mm (48'')/1400 mm(56'') sweep complete all as specified and directed by the Engineer in Charge.

Supply only ball bearing of any sweep sutiable for exhaust fans/pedestal fans of any make & size complete all as specified and directed by the Engineer in Charge.

Supply only capacitor for any type of fan, 230 volts AC including necessary soldering of capacity 2.5 MFD complete all as specified and directed by the Engineer in Charge.

Supply only capacitor for any type of exhaust fan/pedestial fan/air circulator fan 230 volts AC including necessary soldering of capacity 4 MFD for exhaust fans/pedestal fans complete all as specified and directed by the Engineer in Charge.

Supply only oscillation mechanism for table/wall mounting/pedestal fan complete all as specified and directed by the Engineer in Charge.

Supply only plastic canopies of both side for ceiling fan complete all as specified and directed by the Engineer in Charge.

Supply only screw, clamps with nuts & bolts rubber reel with split pin for ceiling fan complete all as specified and directed by the Engineer in Charge.

Supply only rubber reel complete all as specified and directed by the Engineer in Charge.

Supply only shaft any type any size for ceiling fan complete all as specified and directed by the Engineer in Charge.

Supply only shaft any type any size for exhaust fan of any sweep and any make complete all as specified and directed by the Engineer in Charge.

Supply only shaft any type any size for pedestal fan/table fan and wall mounting fans complete all as specified and directed by the Engineer in Charge.

Supply only Metalic blades for exhaust fan of 380mm sweep (one set of three blades) complete all as specified and directed by the Engineer in Charge.

Supply only Metalic blades for exhaust fan of 450mm sweep (one set of three blades) complete all as specified and directed by the Engineer in Charge.

Supply only metalic blade for wall mounting fan 230/300 mm (one set of three blades) complete all as specified and directed by the Engineer in Charge.

Supply only plastic blade (Set of four blade) for exhaust fan 230/300mm complete all as specified and directed by the Engineer in Charge.

Supply only metallic blade for ceiling fan 1200mm sweep any make including bolt for fixing complete all as specified and directed by the Engineer in Charge.

supply only rubber bush suitable for exhaust fan legs of any size complete all as specified and directed by the Engineer in Charge.

Supply only copper conductor multistranded cable flexible 03 core PVC insulated of size 40/0.076 complete all as specified and directed by the Engineer in Charge.

Supply only fan down rod of metal, size 2 feet long complete all as specified and directed by the Engineer in Charge.

Supply only fan down rod of metal, size 3 feet long complete all as specified and directed by the Engineer in Charge.

Supply only fan down rod of metal, size 6 feet long complete all as specified and directed by the Engineer in Charge.

Supply only fan down rod of metal, size 5 feet long complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs fan hook of suitable size & shape made of MS channel/FI/Bar fixed to wall/roof/ Pipe complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs false ceiling fitting with ultra modern recess/surface mounting LED luminaire suitable for armstrong grid/ POP ceiling of 2'x2' and cutout size 600mm X 600mm complete with separate electronic driver and high brightness SMD LEDs including all fixing accessories as per site requirement and making good finishing complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs LED post top lantern 35 watt light fitting made of cast aluminium spigot housing with decorative opal acrylic diffuser with IP-65 protection complete with all accessories fixed on GI pipe 50 mm complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements, with provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed by the Engineer-in-Charge.

Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/50 ltrs of any type complete all as specified and directed by the Engineer in Charge.

Material and labour for refixing storage type water heater, checking the serviceablity of all parts such as inner vessel, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts, spray painting and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge. (Note- all replaced parts shall be included in the quoted rate)

Material and labour for refixing carefully any type/any size old retrieved light fitting any watt after repairing, cleaning all dust including all fixing accessories with wire connection complete job and making electrical connection complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs Tetra plug and socket DBs 5 modules with & including 63 Amps MCB TPN complete with all connetced wiring complete all as specified and directed by the Engineer in Charge.

Material & labour in repair for earthing complete with galvanised steel earth electrode 60cm x 60cm x 6 mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil, PCC (1:3:6) Type C1 in earth pit chamber, precast RCC cover 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note :- The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately.

Supply & fixing in repairs 36 watt CFL 4 pin, 230 volt complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs vacuum impregnated copper ballast (VIPT) for CFL 36 watt complete all as specified and directed by the Engineer in Charge.

Taking down of old unserviceable exhaust fan and deposited at MES store yard and Supply & fixing Exhaust fan AC single phase 230 volt of size 250 mm Sweep noise less Made out of PVC plastic body fixed on plywood with louvere including making a hole in stone wall, finishing with Cement mortar & making good as existing surface complete all as specified and directed by the Engineer in Charge.

Taking down of old unserviceable ceiling fan and deposited at MES store yars and Supply & fixing Ceiling fan AC single phase 230 volt of size 1200 mm Sweep noise less including all connected materials, making good as existing surface complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs square shape slim recessed /Surface LED panel of die cast housing finsed in white powdered coating of 18 W LED EDGEPRO ROUND Light complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs lamp holder PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs 11 Watt LED bulb complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs MCB SPN 63 Amps C curve type complete all as specified by Engineer-in-Charge.

Supply & fixing in repairs MCB SPN 32 Amps C curve type complete all as specified by Engineer-in-Charge.

Supply & fixing in repairs MCB TP 32 Amps C curve type complete all as specified by Engineer-in-Charge.

Supply & fixing in repairs MCB TP 63 Amps C curve type complete all as specified by Engineer-in-Charge.

Supply & fixing in repairs MCB TPN 63 Amps C curve type complete all as specified by Engineer-in-Charge.

Supply & fixing in repairs LED street light fitting 30 Watt, fixing on wall of the building, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by the Engineer in Charge.

Supply & fixing in repairs GI bracket 1.2 m long, made of GI pipe medium grade of 40 mm dia, 2 x clamps made of Flat iron 40 mm x 6 mm Incl nuts,bolts & washers, painting, fixing on wall of the building/ pole complete all as specified and directed by the Engineer in Charge.

M/S KAUTILYA GARG

M/s. Dhananjay Construction

LOKESH ELECTRICAL WORKS CONTRACTOR

KRISHNA CONSTRUCTION COMPANY

M/s Shiv Builder and Suppliers

Shri Electrical Enterprises

M/S RAKESH CHOUDHARY