Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹25.3 L+₹1.2 L (5.18%)Rejected-Finance 38 BHARKATIYA JOSHI NEAR POST OFFICE JHULAGHAT ROAD PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L2 | Rejected-Finance Higher quoted bidder. | |
| 3 | L3₹25.4 L+₹1.4 L (5.62%)Rejected-Finance VILL KASNI POST BIN DISTT PITHORAGARH UK | L3 | Rejected-Finance Higher quoted bidder. | |
| 4 | L4₹25.8 L+₹1.8 L (7.29%)Rejected-Finance | L4 | Rejected-Finance Higher quoted bidder. | |
| 5 | L4₹26.5 L+₹2.5 L (10.3%)Rejected-Finance | L4 | Rejected-Finance Higher quoted bidder. |
Tender Value
₹29.1 L
EMD Value
₹59,000
Closing Date
22 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
PROVN OF RELIGHOUS INSTITUTE HALL FOR GR, PROVN OF IRON RAILING AT GR, PROVN OF REST ROOM UPGRADATION OF PAVED AREA AT PANCHSHUL SAINIK INSTITUTE, PROVN OF 6 DEEP FREEZERS FOR KUMAON OR MESS AND CERTAIN OTHER SANCTIONED WKS AT MIL STN PITHORAGARH
2022_MES_566599_1
8501/PGH/E8
Open Tender
Civil Works
Item Rate
180 days
GE Pithoragarh
Class D, Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹59,000
Yes
7 Mar 2023
1 Dec 2022
29 Dec 2022
1 Dec 2022
22 Dec 2022
15 Dec 2022
Amount
DESCRIPTION OF ITEMS
Excavation in trenches n exec 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc n exec 10 sqm on plan and n exec 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for.
Demolition of brickwork or stone boulder masonary built in cement mortar or lime mortar complete all as specified and directed.
Surface excavation n exc 30 cm deep and averaging 15 cm deep & getting out in hard /dense soil comlete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick earth in hard/dense soil complete all as specified and as directed.
M&L for PCC 100 mm thick 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors etc, complete all as specified and directed.
M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in beams cantilever lintels etc complete all as specified and as directed.
Use and waste of form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.
Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and directed.
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for fair finished surface of concrete complete all as specified and directed.
M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L precast cement concrete Block Masonary with soilid blocks type C1, 1:3:6 (20mm graded stone aggregate exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed .
Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm thick complete all as specified.
M&L for Sand filling under floors or in foundations including watering and consolidation in layers n exc. 25cm thick complete all as specified and directed.
Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
M&l for hard core of broken stone or boulders guage n exec 63 mm deposited and levelled in layers n exec 15 cm thick watered and rammed to a true surface of broken bricks aggregate complete all as spd and directed.
M&L PCC 75 mm thick 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors complete all as specified and as directed.
M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M & L 15 mm thick cement plaster on other than fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth ( w/o using extra cement) complete all as specified and directed.
M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection finished even and smooth ( w/o using extra cement)complete all as specified and directed
M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and as directed.
M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty all as specified complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.
M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry in vertical surfaces over 10 mm thickplastering in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.
S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.
S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.
S&F Stainless Steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified and directed.
S&F heavy duty outdoor tiles 300x300mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.
M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F for steel work as in tubular truss incl special shaped washer etc complete using erw or induction butt welded tubes confirming to IS 1161-1979 gde st-240,including gusset plate pole etc complete all as specified and directed.
M&L Plates (plain or chequered) channels Fe 410-W (Gde E-250) quality B. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surface complete all as specified and directed.
S & F mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as spd and directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck complete all as specified and directed.
Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc.
M&L for Soling (or sub base) 100 mm thick with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified.
M&L for 40mm thick PCC 1:2:4 of type B-1 using 20mm graded stone agrregate as in floors etc and finishing the surface even and smooth complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L rendering or screed bed 5 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC @ 2% by wt of cement including finishing even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound.
Providing and laying APP modified water proofing membrane 3 mm thick with non woven ployster reinforcement having weight not less than 3.5 Kg per sqm over a coat bituminous primer oil based for membrane by the respective manufacture @ 0.30 ltr per sqm including overlapping as specified and as approval of make as specified in PS including a coat of bituminous based aluminium paint on top surface as specified.
M&L for Preparation of old steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as apd and directed.
Excavating in post holes (or similar holes) in hard/ dense soil each n exc 0.5cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and directed.
M & L for Cement Concrete Type C-2, 1:3:6 (40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and as specified.
M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 including finishing the surface even and smooth without using extra cement but incl WPC all as specified and directed
S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for point wiring Concealed type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded sheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, sheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/ fan point point controlled by one, one way switch of 5/6 Amps.
(b) One socket outlet three pin 5 amps control by one switch on independent board.
Supply and Fix for Socket outlet 5 pin, 5/6 amps and 2 pin 5/6 amps flush type, non shutters, non inter locking type, complete all as specified and directed.
Supply and Fix for Switch piano, flush type, white finish, 5/6 amps, single pole, one way.
Supply and Fix for ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
Supply and fixing LED light fitting 1x18W,220V, AC decorative box type with driver, holding including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply aqnd Fixing Sub main wiring with two single run of 4 Sqmm (Normal cross sectional area) of single core unshethed PVC insulated cable, 1100 volts grade multi standard copper conductor drawn through with & including conduit of 20 mm dia with and including necessary conduit accessories,surface type including 4 Sqmm standard copper conductor PVC insulated cable as earth wire connected to common earth dolly,complte all as specified and directed.
Supply and Fixing MCB DB sheet metal enclouser for DB,SPN, 4 way havin protection with 200 amps rated bus bar,240 volts,single door type, suitable for housing MCBs and isolators,surface in wall complete all as specified and directed.
Supply and Fixing MCB single pole,240 volts,6-32 Amps of of 10 KA complete as specified and directed.
Supply and Fixing MCB single pole & Neutral 240 volts,40 Amps of of 10 KA complete as specified and directed.
M&L for point wiring Concealed/ conduit type (as per site reqmt) with 2.5 Sqmm, single core (FRLS), PVC insulated with multistranded sheathed copper conductor cable including rigid non- metallic PVC surface/ concealed conduit 20 mm or higher dia, medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, sheathed, green in colour 2.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly, screwed with Brass screws, cup washers complete all as specified and directed for independent 15 Amp socket power point complete all as specified and directed.
S&F Switch socket combination 2 in 1, 3 pin 15 amp flush type universal with box complete all as specified and directed.
Supply and installation commissioning of metal top deep freezer single phase 240 volts,50 Hz,capacity 405 ltrs complete all as specified and directed.
S & F Voltage stablizer auto cut single phase, 220/240 volts fitted with high/low voltage cut off relays, time delay relay & arrangement & push button / switch for instant start, suitable for input voltage 165 V TO 250 Volts and out put voltage stabilizer between 220 V TO 230 Volts of capacity 5 KVA complete all as specified and directed.
Supply and installation commissioning of doble door Refrigerator single phase 240 volts,50 Hz,capacity 324 ltrs,built in stabilizer complete all as specified and directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .