Construction of BDO Block Development Office Building Lambagaon Distt Kangra

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed PVC conduit with modular switch, modular plates, in Existing suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in Existing surface/recessed PVC conduit, with 2-way modular switch, modular plates, in Existing suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

6x1.5 Sq. mm.

3x4.0 Sq. mm.

6x4.0 Sq. mm.

3x10.0 Sq. mm.

3x16.0 Sq. mm.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required.

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and drawing LAN cable CAT 5E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

50 mm. dia

Supplying & fixing metal box of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required:-

100mm.x100mm.x60mm. deep

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules (78mmx78mmx50mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Telephone socket outlet, Modular.

TV. Socket outlet, modular.

Supply and fixing modular plate and cover including providing and fixing 6 pin 5/6 amps modular socket outlet and 5/6 amp, modular switch in existing recess G.I. Modular box of (140mmx78mmx 50mm) size including connections etc. as required.

Supply and fixing modular plate and cover including providing and fixing 6 pin 5/6 amps modular socket outlet and 15/16 amp, modular switch in existing recess G.I. Modular box of (140mmx78mmx 50mm) size including connections etc. as required.

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

300 mm deep (nominal)

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 300mm & cross-sectional area (25mmx6mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 300 Amp. 415 volts capacity 4 No. each of cross-sectional area (51mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required:-

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -10 KA

250 Amp. -25 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way

Double door-12 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 70 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (four core)

Armoured cable 70 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan with Stepped type modular regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, 300 mm sweep

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Fixed type wall bracket 150 dia, single lamp.(Category-A)

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Mirror light 460 mm, single lamp.(Category-A)

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

32 mm dia. G.I. pipe, heavy class

Providing and fixing of ENDURA liner Neo HF DL surface and wall mounted 15 Watt LED downlighter with white coated aluminium housing with integrated electronic driver item descripction ENDURANEOHESURFACEDLS15WLED 840S Havells make or equivalent complete in all respect includingconnections etc. as required and approved by the Engineer-in-Charge.

Supplying and fixing of M.S fan box (18x10x10) cm with phinolic laminated sheet cover in the front of M.S round 16 mm / 12 mm dia 60 cm long including connection complete in all recpect as required or approved by the engineer incharge.

Providing and fixing of LUMILINE PLUS surface and wall mounted LED Batten 20 Watt extruded aluminium housing and integrated electronic driver 20 Watt item descripction LUMILINEPLUSBS20WLED865SPCSS Havell make or its equivalent complete in all respects including connections etc as required and approved by engineer incharge.

Providing and fixing LED 10 Watt lamp product code LHLDEUEEML8RO10 Adore lamp in existing fixture Havells make etc. as required and approved by engineer incharge.

Providing and Fixing ENDURA CITYLINER NEO PLUS LED Street light made up of pressure die cast aluminium housing fitted with toughned glass and individual high power LED with Secondary optice IP66 protection, impact resistance of 30 Watt 5700 K odering code LHETAXU Havells or its equivalent make complete in all respects including connections as required and approved by ths Engineer-in-Charge.

Providing and fixing of SS enclosure suitable for 100 Amp 4 pole MCCB complete as required and approved by ths Engineer-in-Charge.

Suppl;ying and fixing louvers / Shutters for exhaust fan 300 mm as required or as approved by the engineer incharge.

Supplying and Fixing of CAT-6 RJ-45 Plugs including Crimping complete in all respect as required or approved by the engineer incharge.

Supplying and Fixing of Modular Connection Suitable for CAT-6 RJ-45 Plugs including Connection complete in all respect as required or approved by the engineer incharge.

Supply and Drawing following pair of Fire Retardant PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat unarmoured, jellyfield telephone cable in existing surface/ recessed, steel/ PVC conduit Poly Cab or equivalent Make or approved by the engineer incharge. as required

UNITED ENGINEEER AND CONTRACTOR

JAMWAL ELECTRICAL WORKS