PROVN OF SHED FOR AC LADDER AND CRANE CONSTRUCTION OF MT PARKING SHED AND PROVN OF GREASE TRAP AND SLOPPING OF DRAIN AT COMBINED MESS AT 257 SU 17 FBSU AF UNDER GE AF TRIVANDRUM

Amount

Excvn in trenches n exc. 1.5m wide and n exc. 1.5m in depth for foundation etc. and getting out in soft/loose soil complete all as specified

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation and getting out in hard dense soil Complete all as specified.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified

Returning, filling in hard /dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified

Removing of excavated soil to a distance n exc 50m complete all as specified and as directed by Engr-in-Charge

M & L for PCC 1:4:8 D2 (40 mm graded aggregate) cement concrete in foundations filling and mass concrete/bed blocks complete all as specified

M & L for formwork (Rough finished) surfaces of sides of footings ,pedestal columns etc complete all as specified

M & L for TMT bar for dia equal to & greater than 10mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns /footings etc hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia etc complete all as specified

Ditto as above item but 5mm dia over upto 10mm dia in stirrups, spacers and binders complete all as specified

M & L for RCC M-20 Design Mix Type A1 as in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified

S & F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30cm long complete all as specified

S & F plates (plain or chequred) channels, square cut or notched (ordingary and counter sunk) forming holes with riveted, bolted or welded attachment.

S & F mild steel work (misc) as in hold fast, cleat, wall ties and similar articles conf to Fe-290 Ge E-165

S & F rolled mild steel work in tubular trusses including, special shaped washer etc. complete unsing ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240. complete all as specified

M & L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-410-W(Gde-E-250) quality-A complete all as specified

S & F MS flats as wind ties for roof including securing bolts drilling holes, etc.; flat iron fillets including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M & L Brickwork with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius built in, built in CM 1:6 all as specified.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings etc including necessary form work all as specified .

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces thick in CM 1:4 surfaces finished fair and even complete all as specified.

Preparation of newly plastered surface of walls and applying three coat of white wash on walls complete all as specified

M & L for preparation of new steel and iron surfaces of any discription applying two coat of synthetic enamel paint over a coat of red oxide paint complete all as specified.

M & L for preparation of new steel and iron surfaces of any discription applying two coat of epoxy paint over a coat of epoxy primer complete all as specified

M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

M & L for Cement concrete type D- 2,1:4:8 (40mm graded stone aggregate) 100 mm thick complete all as specified

Plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in floors, 50mm thick. complete all as specified

Plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in floors, 100mm thick. complete all as specified

Forming 12 mm thick expansion joint filled with pre formed bituminous filler and top 30 mm primed and sealed with Group A sealing Compund of 75mm thick complete all as specified

Demolition of brick/stone work built in cement mortar complete all as specified

Demolition of cement concrete(un -reinforced)in ground floor and paving n.exc 15cm thickness(below/above ground level) complete all as specified

M&L rendering 15 mm thick in CM 1:6 to brick work or concrete surface finished even smooth complete all as specified and directed

M&L for cement concrete 1:2:4 type C1,using 20mm graded crushed stone aggregate as in coping,slightly rounded or chamfered angles and throating as directed with including necessary formwork complete all as specified and directed

S&F medium size grease trap of following specifications fixed as directed by Engineer-In-Charge and as per manufactures instructions complete all as specified and directed (a)Size:640mmx345mmx430mm (b) Material of construction :Polypropylene (c) Flowrate:2500 to 3000 lp (d)Inlet pipe:4"(100mm) dia Make:FILTERMAX Model: M-43(S) OR Equivalent Guarantee as per Manufacture’s instructions shall be obtained from Manufacturer

S&F PVC(SWR) pipes 110mm bore single socketed in any length with rubber rings joint fixed to existing sewage line including all accessories complete all as specified

M & L for PCC Type C2 using 40mm graded aggregates for foundation and base of drain complete all as specified and directed

M & L extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/slopped end etc all as specified and directed

M&L for point wiring complete with 1.5 Sqmm 1100 volts grade single core FRLSH PVC insulated unsheathed cable with multi strandard copper conductor ISI marked drawn through concealed PVC conduit medium grade ISI marked of suitable size on walls/ ceiling etc and including provn of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuity conductor connected to common earth dolly including 2.0 mm thick pressed steel terminal boxes with 3.00 mm thick laminated sheet cover to ISI marked to house switches, sockets, regulators etc all as specified and directed for the following:-

One switch socket outlet 5 Amps on independent board

One light point controlled by one one way switch

All as per Item No 39 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet 15 Amps on independent board all as complete all as specified and directed

Supply & Fix Switch piano flush type single pole oneway 5 amps complete all as specified and directed

Supply & Fix Ceiling rose surface bakelite with three terminals complete all as specified and directed

Supply & Fix switch socket combination 3 pin 5 Amps flush type complete all as specified and directed.

Supply & Fix switch socket combination 3 pin 5 and 15 Amps flush type complete all as specified and directed.

Supply and fix new energy efficent LED Box type fitting 1 x 20 watts 4 feet long CRCA body powder coated white batten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete all as specified Make: Havells cat No.LUMILINEPLUSBS20WLED865SPCSS or Philips cat No. BN021LED20S PSU CW GR S2 or Wipro Cat No.LL20-221-XXX-65NE3

S & F MCB DB TPN 4 way of any size and capacity double door with suitable busbar complete all as specified

Supply and fix only the MCB SP 6A - 32A 230V,50Hz,AC with repturing capacity 10kA complete all as specified

S&F MCB TPN 32 to 63 Amps 415 V 50 Hz with repturing capacity 10kA of the following capacities all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 V grade with stranded aluminium conductor confirming to IS 7098/1985 ISI marked including necessary glands, lugs etc of size 10 Sqmm 4 core complete all as specified.

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks complete all as specified.

Sub Total of Schedule 'A'

SCHEDULE OF CREDIT

Schedule of Credit (Minus) Rs. 3,000.00 B/F from Ser page No.111. NOTE: Bidder shall insert credit amount as rate Rs. 3,000.00 in Green field under Col-5.

Sub Total of Schedule of Credit

DEFT GROUP ELECTROMECHANICAL