Alteration/Addition work in new pump room at Tis Hazari court, Delhi

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit etc as required (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X4 sq. mm + 1 X 4 sq. mm earth wire

(c) 4 X4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 6 pin 5/6 & 15/16 ampers modular socket outlet and 15/16 ampers modular switch, connection etc. as required.

Supplying and fixing of following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 12 Module (200 mmX150 mm)

Supplying and fixing of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 15/16 Ampers switch

b) 6 pin 15/16 Ampers socket outlet

c) Stepped type electronic fan regulator (2 module)

Supplying and fixing of following way, horizontal type TPN / SPN, sheet steel, MCB distribution board, 415 / 230 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 4 way (4 + 12), Double door, TPN

(b) 6 way, Double door, SPN

Supplying & fixing of following accessories in the existing TPDB / M.S. box including connections testing, commissioning etc. as required. (a) 5 to 32 ampers SP MCB

(b) 63 ampers SPN MCB

(c) 63 ampers TPN MCB

Supplying, laying & fixing of following size XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade on surface etc. complete etc as required. (a) 4 x 25 sq. mm.

(b) 3 x 10 sq. mm.

Supplying, laying & fixing of following size XLPE insulated PVC sheathed copper conductor unarmoured cable of 1.1 KV grade on surface etc complete etc as required. (a) 3 x 16 sq. mm.

Providing and fixing of 6 SWG diameter G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and making of end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. (a) 3.5 x 120 sq. mm.

(b) 4 x 25 sq. mm.

(c) 3 x 10 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (a) 3.5 x 120 sq. mm.

Supplying, installation, testing & commissioning of energy efficient 1400 mm sweep size ceiling fan, including wiring the down rod of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on fan box etc. as required.

Supplying & Fixing of 380mm sweep size 900/1400 RPM, 230 Volts, single phase, 50 Hz, AC supply Heavy duty exhaust fan including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc as required.

Supplying, installation, testing & commissioning of constant pressure variable frequency drive operated Submersible pump and logical controller of following specification :- Submersible pump made out of SS316 body with SS316 Impeller and should have SS416 shaft with minimum efficiency of 78% and should squirrel cage IE-3 motor, as per below head and Motor Rating - 5 HP, Head 25-45 meters, Discharge 55-30 Meters Cu/ Hour, delivery size 50mm etc complete as required.

Supplying & fixing of following valves/ accessories in pipe line CI PN 1.6 sluice /NRV valves including rubber packing & nut bolts, Socket, supporting angle/stopper for pipe complete etc. as required. a) 80 mm diameter CI PN 1.6 sluice valve

b) 80mm diameter C.I Non Return Valve

c) 80 mm diameter CI PN 1.6 Butterfly valve

d) 80 mm diameter CI PN 1.6 Gate valve

e) 80 mm diameter medium class GI Pipe

f) 50 mm diameter medium class GI Pipe

Supplying, installation, testing & commissioning of floor mounted, front openable type cubical panel board, 300 mm deep suitable for 415Volts, 3 Phase,4 wire, 50 Hz, AC supply with IP:66 protection and approximate size of 2.00 sq meters suitable for mounting of followings switchgears, fabricated in compartmentalized design with 2mm thickness CRCA sheet including powder coated painting with approved colour in even shade, having suitable size TPN Aluminum bus bars of high conductivity minimum 1.5 times of incommer rating, DMC/SMC bus bars supports, bottom base channel of MS section not less than 75mm x 50mm x 5mm thickness, 2 Nos. earth studs, solid connections from main bus bar to switch gears with required size of Aluminum bus bars and control wiring with 1.5sq.mm FRLS PVC insulated copper conductor single core cable, cable alleys, suitable foundation, connections etc as required

Providing & fixing of following switchgears and accessories in the existing cubical panel board including drilling holes and making connections, testing etc as required. a) 400 Ampers 50 kA, breaking capacity TPMCCB (Icu=100%Ics)

b) 250 Ampers, 35 kA, breaking capacity TPMCCB (Icu=100%Ics)

c) 100 Ampers, 25 KA, breaking capacity TPMCCB (Icu=100%Ics)

d) Digital Voltmeter with toggle switch.

e) Digital Ammeter with CT’s and toggle switch

f) Indicating light LED type 3nos

g) ML -4 FASD starter

Supplying, installation, testing & commissioning of energy efficient recessed mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram.

Supplying, installation, testing & commissioning of stainless steel panel pedestal type with G.I. cabinet storage type Water Cooler of following Capacity, fully Stainless Steel suitable for operation on 230V + 10% ,50 Hz, single phase, AC supply including making connection for water pipe line electrical connection etc. as required. a) 380/400 Liters capacity

Supplying, installation, testing & commissioning of Reverse Osmosis System having capacity of RO 1000 LPH designed for Treatment of saline water in the TDS range of 500-2000ppm which are Completely assembled /Pre-piped/Pre-wired with Microprocessor-based control Panel for ease of operation and inbuilt process Logic having provision for Auto start/stop based on Water level in the Tank with MCB for Plant operation and Raw water pump integrated with Plant. Treated water of Installed RO Plant of Specific Manufacturer has to be tested by NABL Accredited Laboratory. Integrated pretreatment Module for removal of suspended solids along with pressure gauges, Robust high Pressure Pump in SS 304 Construction, Inbuilt Protection to high Pressure Pump by Way of Low Pressure Switch/high Pressure switch and Glycerine filled SS Pressure gauges for durability, On line Rota meter for measuring permeate flow and Powder coated MS skid with plated hardware having Technical specification separately attached.

Supplying, installation, testing & commissioning of 20W to 22W, 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required at site.

Shaka Electrical (India)

Krishna Electreical Works

SKYLINE AIR CONDITIONING ENGINEERS PVT. LTD.

Aas Electric Company

SEHRA ELECTRIC WORKS

M/s Bhagwat Associates