Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC CHAKKALAKKAL H KOTTAT P O | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.9 L+₹3,955.40 (1.40%)Rejected-AOC THRISSUR KERALA | THRISSUR | KERALA | 679105 | L2 | Rejected-AOC L2 |
Tender Value
₹3.7 L
EMD Value
₹9,225
Closing Date
19 Jul 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MUNICIPAL ENGINEER
Municipal Office Chalakudy Thrissur Pin 680307
CHALAKUDY MUNCIPALITY Resource Recovery Facility Center - ELECTRIFICATION
2022_LSGD_499022_1
H2/2930/22
Open Tender
Electrical Works
Item Rate
90 days
CHALAKUDY
Please refer Tender documents.
7 documents required · 7 mandatory
₹871
₹9,225
Yes
12 Oct 2022
12 Jul 2022
21 Jul 2022
12 Jul 2022
19 Jul 2022
12 Jul 2022
12 Jul 2022 - 17 Jul 2022
Amount
LIGHT WIRING Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FR PVC insulated stranded single core copper conductor cable 650 V grade, including providing switch board main and continous earthing with No.14 SWG bare copper, required quantity of copper earth socket, brass bolt and nut crimping / soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tiemounds etc. as required. (Group B /RoHS compliant modular accessories).
Single Control light point with 6 amps 3 plate ceiling rose-short point
Single Control light point without ceiling rose-short points
combined plug points with 6 amps, 5 pin plug socket controlled by 6A switch board as that of lights point.
Single control ceiling fan point with 6 A, 3 plate ceiling rose and with socketsize stepped electronic regulator-short point.
Supplying and fixing angle/ straight brass lined skirt type bakelite batten without shade and giving connection etc. as required.
Supply and fixing shades of the following types of shades on existing batten/ pendent/ bracket fittings as required
200 mm plastic still shade
Supply and fixing cast aluminium stove enameled bulk head facing with deept drawn anodised aluminium body, epozy powder coated heat resistant prismatic glass cover suitable for 9 V CFL to wall/ ceiling including giving connection with required length of 16/0.20 mm PVC sheathed 3 core round copper conductor flex wire conforing to relevant ISS or extending the orginal wiring and making good the surface as required.
Supply and providing the following types and power rated lamps in the existing fittings as required.
Normal size 11W BC/ ES retrofit/ LED
Normal size 15W BC/ ES retrofit/ LED
Supply, conveyance, installation, testing and commisoning the light fittings of following types made from 0.5 mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 Nos. 'C/U brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required lenght of 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or extending th orginal wiring and giving connection etc. as required.
1200 mm 1 x 20 W LED lamp with box type fixture
1200 mm 1 x 20 W LED lamp with box type fixture
1200mm 2x20W LED lamp withbox type fixture
Supply, fabrication, conveyance and fixing the following sizes of B class G.I. pipe bend to shape/ cut and welded to shape and fixing the same to wall/ parapet using clamps as noted alone with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing tc. as required- 32 mm dia with clamps made from 20 x 3 mm MS flat ( for oudoor light(3x1.5m) and service pipe(1x2m) ).
Supply conveyance installation testing and commisioning of 36/40 W LED street light output greater than 105 lumen/W 4000-6000 K with IP66 protection LED chip make cree/lumilled/niehea with power factor greater than 0.95 at full load, internal surge protection upto 8 kV and aluminium pressure dicast powder coated housing accrylic cover complete with THD less than 10% power factor greater than 0.98 RoHS compliant duly wired up for use on 230 V a.c. supply driver compartment should E16be separately accessible for maintanence (LM79 & 80 certificates from NABL accrediated third party lab to be produced mentioning chip manufacturer)
Supply , conveyance , insul ation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistants type regulater wiring the down rod with 16/0.20 mm PVC insulated and PVC sheathed 650/1100 V grade 3 core round copper conducter flux wire or with extended original wiring etc. as required.
1200 mm sweep - 5 star rated
Supply, conveyance,installation testing commisioning wall mounting fan of the following sizes using mounting brackets supplied along with the fan and giving connection with existing wire.
400mm sweep
Conveyance, installation, testing and commissioning of exhaust fan of size upto 450 mm in the existing opening, fixing necessary bolt and nut, making good the damages etc. as required including giving connections with required length of 24/.20 mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS
Supply installation of 150 mm sweep light duty Exhaust fan in plastic body with self opening lowers working on 230 V single phase a.c.
Supplying and fixing following size/ modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required. 8 mudule
3 module (100 x 75 mm)
8 module (125 x 125 mm)
Supply and fixing the following modular switches and accessories in he existing front plates and giving necessary connections as required. ( Group B / RoHS compliant)
5/6A SP one way switch
15/16 A switch
3 pin 5/6 A amp socket outlet
6 pin 15/16A amp socket outlet
Supply and fixing the following way single pole and nuetralsheet steel, MCB distribution board 240 Volts on surface / recess complete with tinner copper bus bar earth bar din bar interconnections powder painted including earthing etc. as required. ( but without MCB /RCCB/isolator).
Single phase 12 way double door
Supply and installation of the following accessories suitable for 50 Hz, AC supply conforming to IS 8828-1995/IEC 60898 of the following current ratings in the existing enclosure and giving connections as required .
S&F 40 A double pole 240 V mini brake isolater.
S&F 6-32 A SPMCB (C curve)
40A, 2pole 240Volts,30mA RCCB
Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly door interlock and locking arrangement of the following ratings on exist-ing angle iron frame work or directly to wall using necess-ary bolts and nuts fixing the unit to wall making good the damages ,colour washing etc. including giving connections as required. (excluding cost of HRC fuse links in case of SDF/SDFCO.)
63A, TPN,Switch Disconnector fuse unit (Panel mounted type)with ISI Marked HRC Fuses.
32A, TPN switch Disconnector fuse unit (Panel mounted type) with ISI Marked HRC fuses.
100A,TPN Switch Disconnector unit with ISI Marked HRC fuses.
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel ,making connection etc.as required.
32A Amp.TP&N
63Amp. TP&N
Power Wiring
Fabrication of fully partitioned, dustin vermin proof enclosure for panel assembly of the 2 DG sets as per form 4 of IS 8623 ( with latest amendments ) using 1.60 mm CRCA sheet as per aprooved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq.mm braided copper conductor , providing necessary cut outs for mounting meters, relays, indication lamp, bus bar, interconnection etc. detachable covers for bus bar chamber and cable alley , powder coating the assembly after subjecting to 7 tank process etc. as required. CRCA sheet along be used for the fabrication . Angles/ flats / slotted angles etc. shall not be used for the fabrication of panel assembly. The measurements should be taken the area complete sheets used for panel board including partitions, folding, shrouding, etc. including control wiring ( excluding the base frame).
Supply and providing following sizes of SMC sheets in the panel of the DG set as barriers and shrouding using required bolts and nuts including cutting to shape as required.
2 mm thick
Supply and fixing following types of beeding along the periphery of doors other detachable compartments to make the panel assembly of the DG set dust and vermin proof including sticking with glue
U section PVC beedingin the panel board
Fabrication supply coveyance & installation of angle iron frame work for wall mounting panel board of the DG set using suitable size angle iron cut and welded to shape including painting with 2 coats of synthetic enamel paint over a coat of Zinc chromate primer bolting the frame to the panel using required bolts and nuts fixing the hole to the wall making good the damages etc. as required.
Supply and providing copper bus bars including finger type SMC bus bar support in the bus chamber of the DG set, suitable size nut and bolt, providing heat shrink sleeves etc. as required
Supply and providing copper earth bus in the panel board of the DG set.
Providing and fixingfollowing rating and breaking capacity and pole MCCB with thermo magnetic releaseand terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel ,making connections etc. as required.
125 Amp,36KA,4pole
Supply ,fixing one no. earth fault relay upto 125 A to 200 A with CBCT.
Supply and fixing auxillary switch (1NO.+ 1NC ) in the existing MCCB of rating upto 630 A
Supply and fixing one no. under voltage release for all voltage range upto 630 A
Supply and fixing the following sizes of PVC conduit conforming to IS 9537/1983 part III along with all required accessories in surface/ recess including making cutting the wall making good the damages etc. as required.
25 mm dia light gauge
Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface/ recess conduit / CMS as required including giving necessary connections of the following sizes
1.50 sq.mm 2 Run
1.5 sq.mm 3 Run
6 sq.mm 4 Run
10 sqmm 4Run
Supply and fixing the following Power capacitors of 3phase delta connected in position and giving connection.
1KVAr, 3phase Capacitor(440Volt,delta connected Metalised Poly propelene Cylindrical type)suitable for direct connection to Motors
3KVAr, 3phase Capacitor(440Volt,delta connected Metalised Poly propelene Cylindrical type)suitable for direct connection to Motors
6KVAr, 3phase Capacitor(440Volt,delta connected Metalised Poly propelene Cylindrical type)suitable for direct connection to Motors
S&Fmotor Starters of the following ratings
Three phase DOL starters for 0.25hp to 7.5hp Motors
Semi Automatic Star/Delta starter for 5 to7.5hp Motors
Fully Automatic Star/ Delta Starter for 15hp Motors
Earthing with G.I. earth plate 600mm x 600mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 M long etc. with charcoal / coke and salt as required
Supplying and laying 25 mm x 5 mm G.I. strip at 0.5 M below ground as strip earth electrode, including connection/ terminating with G.I. nut bolt , spring washer etc.as required . ( Joining shall be done bu overlapping and with 2 sets of G.I. nut bolt and spring washer spaced at 50 mm)
Providing and fixing testing joint made of 2 no. strips as mentioned below of the following sizes provided on either side of the conducters with 4 nos of G.I. boards, nuts , check nuts and spring washers etc. complete as required.( for down conducters)
2 Nos 25 x 6 mm G.I. strip 150 mm long
Supply and laying bare earthing conductors of the following sizes layed 0.6 M below ground level including excavating trench etc. as required.
3.15 mm copper conducter ( 10 SWG )
Supply and drawing bare earthing conducters of the following sizes along with wiring / cables and giving connections as required
2.0mm copper conducter(14SWG)
2.65 mm copper conducter ( 12 SWG)
3.15mm copper conducter(10 SWG)
Supply of superior quality copper earth sockets for the following sizes of earth conducter including crimping etc. as required
2mm (14 SWG)
2.65mm (12 SWG)
3.15 mm (10 SWG)
Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required .
25 x 3 mm brass bolt and nut
25 x 6 mm brass bolt and nut
Supply ,threading, laying and jointing of the following sizes of B class G.I. pipe all required accessories in ground in the existing trench as protective covering to earth leads
20 mm dia
Supply and drawing the following sizes of multi core PVC insulated &fRLS PVC sheathed 650/1100 V grade copper conductor round flexible cable conforming to IS 694part I 1960 in the existing surface /recess conduit as required including giving necessary connections of the following sizes
3 core 6.00sqmm
Fabrication, supply and installation of dust and vermin proof, wall mounting , Hot press moulded SMC metre box of following sizes suitable for fixing KSEB metre, fuse units, CT etc., hinged door construction for the front side with compartments if necessary, proving vision panel for the metre compartment, knock out for cable entry and exit.
GS-MB3750 (inside 700x481 x200 mm )
Supply and fixng the following accessories in the existing meter board and giving connections etc.
100 A HRC fuse base with HRC fuse link
100 A, 415 V, 2 way nuetral link mounted on DMC/SMC base
100/5 A, 5 VA, accuracy class 0.2, tape wound metering CT
Supply laying and clamping of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60 cm, making good the damages, colour washing etc. as required
4 core 4 sq mm with factory made clamp
2 core 6sqmm with factory made clamp
3 core 10sr.mm with factory made clamp
3 core 16 sq.mm with factory made clamp
3.5 core 50 sqmm with factory made clamp
Supply and making end termination with brass compression gland and aluminium legs for the following size PVC insulated and PVC sheathed armoured aluminium conducter cable of 1.1kv grade as required
2x6 sqmm.
3x10 sq.mm
3x16 sq.mm
3.5x 50sqmm
2.00mm thick 3.3 KV,Sy.Elastromeric fire retardant insu-lating sheet.
Supply and providing 5kg Dry chemical powder type fire extinguisher with hose and clamps including fixing it to wall as required.
KSEB completion certificate and test report
SURESH K S
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_715426.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .