Urgent repairs to be carried out at dewatering Scheme Mehrajpora of MISD Sopore.

Amount

Urgent repairs by way of providing, fabrication and fitting of angle iron panel board of size 6ft×4ft fabricated out of ISA 50×50×5mm and ply board flushed/backed with sun mica as per requirement. The fabrication is to be carried out by required mechanical operations viz., cutting, aligning, boring and welding. The welding is to be carried out by superior quality electrodes viz., Adore/Advani. The panel is to be erected and the two vertical legs to be embedded in a cement concrete block with M15 mix after proper excavation of trenches. Also the fitting of 19mm thick ply board backed with sun mica on angle iron frame by required nut bolts, washers and other accessories. The job also includes cuttings and creation of holes for fitting of electrical gadgets on panel board by required tools arranged by the firm. The details of the panel board here as. ISA 50×50×5mm Vertical: 6ft ×2No. =12 ft (including legs) Horizontal: 6ft×2No.= 12ft Hz Tee: 01ft Back lugs: 1.5ft×04No.=06ft Nut bolts: 02 Kg Ply board: 19mm thick of size 6ft×4ft. =24sft Sun mica: 6ft×4ft =24sft Adhesive: poly urethane based and fevicol. Set of indication lamps: Red, blue and green with batten holders and wiring. Meters: Analogue type voltmeters 0-500V and Ammeter 0-200A (01 No. each) The job also includes providing and applying of metallic primer and two coats of anti-corrosive paint to angle iron frame.

Addition, alteration and repairs by way of dismantling and extraction of 300mm ND suction system and delivery main by manual means. The suction system includes 300mm dia horizontal and vertical pipe pieces, bends and foot valve. The repairs to be carried out by mobile welding set which includes DG set, tata mobile, welding set, skilled workers and superior quality electrodes. The welding to be carried out by superior quality electrodes in two layers to avoid further leakage. The job includes repairing of horizontal and vertical pipe pieces by required welding lump sum 200cm. The job also includes cutting and alteration of departmental pipe by way of providing and fitting of 02 No. of 300mm dia flanges thickness not less than 12mm for fabrication of tail piece of 4 ft. Also includes repairing of delivery main by required welding at four spots to arrest the leakage. The job includes providing and fitting of required nut bolts of 10kgs and 300mm dia gaskets (06 No.) with leak proof solution. Also includes necessary checking and repairs to foot valve to avoid leakage and provide strength to withstand hydraulic pressure by way of replacement of weight plate/flap along with lever, rubber washer, repairs to hinge complete and repairs to foot valve body by required welding.

Providing and fitting of 40mm dia brass gate valve of heavy duty along with 40mm dia 6inch nipple after removing of damaged one. The nipple to be fitted by required welding to pipe along with all fittings.

Providing and fitting of aluminium thimbles of 120mm sq with required polyolefin tubes to be fitted with crimping tool to the existing cable.

Providing and fitting of 70mm sq. copper thimbles with required polyolefin tubes to be fitted with required crimping tool.

Fabrication and providing of steel structure bed of size 4ft×6ft bed fabricated out of 40×40×5mm angle iron with 19mm ply board of size 4ft×6ft.

M/S M A ELECTRONICS