Provinding annual rates for Removing leakages of water pipeline from half inches to 18 inches and allied water supply work

Amount

MATERIAL,Labour and Machinary

M.S.plate

Nutbolts

Rubber packing for Valve 3mm Thick

Rubber packing for Valve 5mm Thick

Graphite Gland Packing Rope ( Gland Rassi)6mm thick )

Grease

Labour And Machinary

Maistry

Pump Driver

Welder

Welder for pipe line

Valve Operator for water supply distrubation ( Avg, 6hr)

TileTurner

L.M.V. Driver

Electrician

Machanical

HIRE CHARGES OF MACHINERIES

Rent for chain pully block with tripod

Rent for pump including operator & excluding fuel

Rent for welding set with Generator

Rent for JCB

Pipe cutter with operator

Excavation

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) Lift 0 to 1.5 M

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259) Lift 0 to 1.5 M

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift 0 to 1.5 M

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Water Connection Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc.

(With Road Crossing)

For 15 mm Service connection

For 20 mm Service connection

For 25 mm Service connection

(Without Road Crossing)

For 15 mm Service connection

For 20 mm Service connection

For 25 mm Service connection

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality )

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Machine ends suitable for PSC pipes of all diameters as per detailed drawing with 10 mm thick x 0.7 M long barrel welded to it.

Only flanges with machining and drilling holes, etc. com-plete more than 40 mm thick.

Double flanged specials of all diameters

All socketed specials or socketed branch flanged specials of all diameters.

Plain ended specials or plain ended branch flanged specials of all diameters.

MS barrels (pipe pieces) locally manufactured (for small quantities)

P. V. C. PIPES Providing and supplying in standard lengths ISI mark rigid unplastised PVC for potable water with rubber ring joints including cost of rubber ring as per IS-4985-1998, excluding GST

Working Pressure 4 Kg/Sq.cm

Working Pressure 8 Kg/Sq.cm

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).

Working Pressure 4 Kg/Sq.cm

Working Pressure 8 Kg/Sq.cm

D.I. FITTINGS (Mechanical Joints) Providing and supplying D.I. fittings with I SI mark Mechanical j oint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.

MJ Collar/Coupling

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

H. D. P. E. PIPES Providing and supplying i n standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.

PE-100 a) 6 Kg/Sq. cm :

PE-100 a) 8 Kg/Sq. cm :

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.

Couplers

Couplers 20

Couplers 25

Couplers 32

Couplers 40

Couplers 50

Couplers 63

Couplers 75

Couplers 90

Couplers 110

Equal Tee

Equal Tee 20

Equal Tee 25

Equal Tee 32

Equal Tee 40

Equal Tee 50

Equal Tee 63

Equal Tee 75

Equal Tee 90

Equal Tee 110

Elbow 90 Deg.

Elbow 90 Deg. 20

Elbow 90 Deg. 25

Elbow 90 Deg. 32

Elbow 90 Deg. 40

Elbow 90 Deg. 50

Elbow 90 Deg. 63

Elbow 90 Deg. 75

Elbow 90 Deg. 90

Elbow 90 Deg. 110

Elbow 45 Deg.

Elbow 45 Deg. 32

Elbow 45 Deg. 40

Elbow 45 Deg. 50

Elbow 45 Deg. 63

Elbow 45 Deg. 75

Elbow 45 Deg. 90

Elbow 45 Deg. 110

End Cap

End Cap 20

End Cap 25

End Cap 32

End Cap 40

End Cap 50

End Cap 63

End Cap 75

End Cap 90

End Cap 110

End Cap 125

Male Adaptor

Male Adaptor 20 x 1/2"

Male Adaptor 25 x 3/4"

Female Adaptor

Female Adaptor 20 x 1/2"

Female Adaptor 25 x 3/4"

Coupling

Coupling 20 x 20

Coupling 25 x 25

Valves Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.

Sluice valves - PN -1 (Without by pass)

Sluice valves - PN -1.0 (With by pass arrangement)

Sluice valve - PN - 1.6 (Without by pass arrangement)

Sluice valve - PN - 1.6 (With by pass arrangement)

Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support.

Butterfly valve - PN - 1 (With by pass arrangement)

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Air Valve Single Ball Flanged / Screwed Type - PN -1

Air Valve Single Ball Flanged / Screwed Type - PN -1.6

Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete.

Air Valve Double Ball Flanged Type - PN -1

Air Valve Double Ball Flanged Type - PN - 1.6

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete.

Air Valve Double Ball Flanged Type - PN -1

Air Valve Double Ball Flanged Type - PN - 1.6

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).

Air Valve Single Ball (PN-1 and PN - 1.6)

Air Valve Double Ball (PN-1 and PN - 1.6)

Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.

S.B.R. Gaskets for C. I. / D.I. Pipes

Sealing ‘ O' Rings of SBR (for CID Joints)

Flat Flanged Gaskets moulded out of SBR (ForFlanged Joints)

Providing Rubber Gasket -

EPDM Gaskets for C. I. / D.I. Pipes

Mechanical joints and Fittings

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed.

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

Supply of C. I . Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

XV. FABRICATION OF M.S. PIPES & SPECIALS

Providing, fabricating and fixing expansion joints for pipelines as per the drawing. The rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, Rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding GST levied by GOI & GOM in all respect etc. complete.

Expansion joints suitable for pipe diameters.

Valve repair

Valve threaded with material Threding operation and removing and fitting rod

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

Threaded Rod Guider with material Threding operation and removing and fitting rod

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

Sujit V Bhosale

TUKARAM DIGAMBAR SUTAR