SPECIAL REPAIR TO ROAD AND PATH NEAR CSD AT IMA DEHRADUN

Amount

M&L for premix bituminous macadam consolidated thickness 75mm or less with using 4% binder content by weight of total mix using viscosity grade Bitumen VG-30 any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and directed .

M&L for preparing of black top surface by brushing with mechanical boomer for removing caked mud etc. and sweeping with mechanical boomer and finally with air compressor to remove all loose dirt etc and finally fanning the cleaned surfaces with gunny bags to removed all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using viscosity grade Bitumen VG-10 over black top surface complete all as specified and directed.

M&L for providing bituminous premix semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for providing bituminous premix semi dense asphaltic concrete 25 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for preparation of road surfaces and applying thermoplastic paint of minimum 2.5 mm thick single coat layer as in lines, dashes, arrows etc for road marking with using 'HOT MARK' thermoplastic paint (Hot application), White/Yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate inter fillers, Thermoplastic required for glass beads shall be as per table No 8004 of MORTH specification including spraying of glass beads etc all as per manufacturer instruction complete including taking out old layer of paint complete all as specified and directed.

S&F in repair high intensity grade shedding retro reflective delineator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work complete all as specified and directed.

S&F in repair Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm f height 20mm with fixing with epoxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10hours complete all as specified and directed.

S&F in repair cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side complete all as specified and directed.

M/S Anil kumar

Sharda Enterprises

Kum Kum construction co.

SARASWATI CONSTRUCTION CO

BUILDTECH ASSOCIATES