Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹90,609.60Accepted-Finance | ₹90,609.60 | 1 | Accepted-Finance l1 |
| 2 | Not Admitted-Fee/PreQual/Technical/Finance | - | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
| Sl No | Description | Qty | Unit | Ettumanoor Vanitha Labour Contract Cooperative Society LTD No.K1240 L1 |
|---|---|---|---|---|
| 1.00Anganavadi Maintenance | ||||
| 1.00 | 50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall | 20 | metre | 400 ₹8,000 Lowest |
| 1.00 | 50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2 | 20 | metre | 300 ₹6,000 Lowest |
| 1.00 | OD410899/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester
top coat 15-18 microns.Sheet should have protective guard film of 25 microns
minimum to avoid scratchesduring transportation and should be supplied in
single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall
be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM
seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding
the cost of purlins, rafters and trusses and including cutting tosize and shape
wherever required | 44 | sqm | 540 ₹23,760 Lowest |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 1.2 | cum | 6,250 ₹7,500 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 22 | sqm | 330 ₹7,260 Lowest |
| 1.01 | OD127461/2026-2027:Providing and fixing 150 mm split pipe over flat iron brackets 20 x 5 mm size | 10 | metre | 250 ₹2,500 Lowest |
| 1.01 | OD127478/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse 6 mm metal filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 29.4 | sqm | 1,000 ₹29,400 Lowest |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.41 | cum | 8,500 ₹3,468 Lowest |
| 1.01 | OD127567/2026-2027:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 22.68 | kg | 120 ₹2,721.6 Lowest |
Tender Value
₹99,816
EMD Value
₹2,495
Closing Date
10 Aug 2026, 2:00 pmClosed
SARITHA P GOPAL
O/O Assistant Engineer,LSGD Ayarkunnam
Pr No 145/26-27 Anganavadi No 6 Maintenance in Ward 3
2026_LSGD_863340_1
AE/LIDEW/145/ARKM/26-27
Open Tender
Civil Works - Others
Item Rate
90 days
Ayarkunnam GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹2,495
Yes
16 Sept 2026
1 Aug 2026
11 Aug 2026
1 Aug 2026
10 Aug 2026
1 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Anganavadi Maintenance | |||||
| 1.001 | 50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall | - | metre | - | - |
| 1.002 | 50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2 | - | metre | - | - |
| 1.003 | OD410899/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester
top coat 15-18 microns.Sheet should have protective guard film of 25 microns
minimum to avoid scratchesduring transportation and should be supplied in
single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall
be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM
seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding
the cost of purlins, rafters and trusses and including cutting tosize and shape
wherever required | - | sqm | - | - |
| 1.004 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 1 | cum | - | - |
| 1.005 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | sqm | - | - |
| 1.006 | OD127461/2026-2027:Providing and fixing 150 mm split pipe over flat iron brackets 20 x 5 mm size | - | metre | - | - |
| 1.007 | OD127478/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse 6 mm metal filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 1 | sqm | - | - |
| 1.008 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.009 | OD127567/2026-2027:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1460433.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
145nit.pdf
Tender Documents • 0.02 MB
145pa.pdf
Tender Documents • 0.26 MB
145sbd.pdf
Tender Documents • 1.81 MB
145ft.pdf
Tender Documents • 0.25 MB
145af.pdf
Tender Documents • 0.23 MB
Epaymentform.pdf
Tender Documents • 0.01 MB
Formofintegritypact.pdf
Tender Documents • 0.01 MB
BOQ_1460433.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .