Construction of Additional Room and lavatory at Niabat office Awantipora (Noorpora).

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc.upto required depthh and size, including dressing of sides and ramming of bottoms, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 : 6 (1 cement : 6 coarse sand)

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level including carriage of all materials involved with loading unloading and stacking complete.

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips : 40 mm wide and 4 mm thick

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls: Under 20 cm wide

12mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

6mm cement plaster of mix 1:3 (1 cement: 3 fine sand)

Providing and fixing panelled and glazed shutters for doors, windows and clerestiry windows fixing butt hinges of required size with necessary screws excluding panelling which will be paid for separetely. All complete as per direction of Engineer incharge. 30mm imported Wood.

Providing and fixing panelled or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestiry windows (Area of opening for panell inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters.

Providing & Fixing 3.5mm thick panels of Plain Glass incl. nails, beadings etc complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying cement based wall putty of required thickness over surface to prepare the surface even and smooth complete in specified areas as per specified patter

Painting wood work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats applied over an under coat of primer of approved brand and manufacturer. (New work.)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and fixing of following aluminium fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colors or shades with necessary screws etc complete.

L Drop with Lock

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing PVC pipes 100mm type B incl door tees, flow trap, couplers, bends etc

Providing and fixing PVC pipes 75mm type B incl door tees, flow trap, couplers, bends etc

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : including C.I. cover with frame (light duty) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including all carriages complete. of required size.

Providing and fixing white vitreous Indian type water closet with PRS trap. 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (580x440mm).

Providing and fixing of vitreous china pedestal type wash basin with CI /MS brackets 15mm C.P brass pillar taps, 32mm CP Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous China wash basin size 630x450mm with a pair of 15mm CP brass pillar taps with elbow operated levers (standard brand) and waste pipe.

Providing and fixing rectangular shape 453x357 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers including Glass Shelf complete

Providing and fixing short nose CP brass bib cock of approved quality (15 mm nominal bore).

Providing and fixing 15 mm nominal bore CP brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated rod with L.P/HP.H. D plastic balls.

Providing and fixing CP Brass wall mixer of quality & make as approved by Engineer in charge (a) 15 mm nominal dia

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 25mm with concealed fitting arrangements, weighing not less than 106gms.

P/F of PVC connections

P/F of 50 Ltr water heater (Geyser) of standard make and manufacture incl.all fixtures.

carriage of different materials by MT incl loading and unloading stacking complete

stone aggregate for an average lead of 4 km

sand for an average lead of 4 km

bricks for an avg lead of 20 km