Renovation/Repairing on Canal Service Road of Nidhaura Minor From Km. 0.370 to Km. 7.470

Amount

Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Grading-2 as per MORD specification Clause 405

Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Grading-3 as per MORD Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg per sqm using mechanical means.as per MORD specification 502

Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with hydrolic broom as per MORD specification 503.

Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tones/hour, layoing and rolling with a smooth wheeled roller, finished to required level and grades by Paver Finisher as per Tehnical Specification Clause 510

Providing and laying of premix sand seal coat type B with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. as per Tehnical Specification Clause 511

Brick edging on both side of road with first class brick 8 cm wide and 12 cm deep laid with mud morter including all material,labour T&P etc complete Ref. to Speci no 765

Earth work in strengthening bank of canal /Dam /Bandhies /Roads by Porclain /JCB machines including partial copaction in layers withintial lead and lift of 5.0m each in all type of soils with disposal as directed by site incharg.

ANIL KUMAR SINGH