CONSTRUCTION OF PAVILION BUILDING,OFFICE BUILDING, CHANGING ROOM BUILDING OF B.S. COLLEGE, LOHARDAGA STADIUM , DIST- LOHARDAGA.

Amount

Earth work in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees,, shrubs all complete as per approved design, building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding 150mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Filling in foundation trenches and plinth in layers not exceeding 150mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Filling in foundation trenches and plinth in layers not exceeding 150mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Providing designation 75 A Brick work in C.M (1:4) in foundation & plinth with approved quality of clean coarse sand of F. M.2 to 2.5 including providing 10mm thick mortar joints costs of screening, materials , scaffolding, raking out joints to 15 mm depth curing , taxes and royalty all complete as per building specification and direction of E/I. gallery

Providing P.C.C M-10 with nominal mix of (1:3:6) in foundation With approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, suttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curing taxes and royalty all complete as per building specification and direction of enfineer-in-charge

Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of ston chips 20 mm to 6 mm size graded and clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position . Vibrating ,striking ,curing ,taxes and royalty all complete as per building specification and direction of Engineer- in-Charge. gallery

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete

WALL TILES

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

FLOORING

Providing and lying vitrified Paring / industrial tiles in different size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 4457:2007 of approved make, in all colours and shades, laid on 20mm thick cement mortor 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3kg/ sqm including grouting the joints with white cement and matching pigments etc. complete size tiles 300x300x10 mm sizes.

Providing and laying vitrified Cool tiles in different sizes (thickness to be specified by the manufacturer) with watel absorption less than 0.08% and conforming to IS: 154557 - 2007 / 15013006, of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with 'hite cement and matching pigments etc., complete. Size of ile 300x300x10 mm thick.

SKIRTING

Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete Size of Tile 600 x 600 mm

RCC WORK

Providing RCC M 20 wiih nominal mix of ( 1:1.5:3 ) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean ccarse sand of F M 2 5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reniforcement, taxes and royalty all complete' as per building specification and direction of E/l

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in staircase with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position . Vibrating ,striking ,curing ,taxes and royalty all complete as per building specification and direction of Engineer- in-Charge. To be designed as M-30

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in beams of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position . Vibrating ,striking ,curing ,taxes and royalty all complete as per building specification and direction of Engineer- in-Charge. To be designed as M-35

Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6 mm. size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.

BRICK WORK

Providing designation 75A brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. Thick morter joints, cost of screening, materials, scaffolfing, raking out joints to 15mm. Depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125mm THICK REINFORCED 75A brick work in C.M.(1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. Thick morter joints, cost of screening, materials, scaffolfing, raking out joints to 15mm. Depth curing, taxes and royalty all complete as per building specification and direction of E/I

PLASTER WORK

Providing 19mm thk. Water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other water proofing compound including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm , cement plaster (1:4)with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I. gallery

Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thk. Water proof cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per builing specification and direction of E/I.

FINISHING WORK

Providing two coats of dry distemper of approved shade and make over a primer coat of wasing over new surface including preparing the plasterecl surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per builciing specification and direction E/l.

Providing two coat of synthetic enamel paint over a coat of primer of approved shade and make over new wooden & surface after cleaning, removing dirt, scales, smokes, grease and sand paper, including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing one coat of oil bound distemper of approved shade and make over old surface including washing,cleaning and papering the walls,scaffolding,washing of floors and taxes all completeas per building specification and direction of E/I.

white washing three coats over new surface.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge 9.117.1 Extruded section profile size 48x40 mm pavilion Building

Supplying fitiing and fixing 32mm thick good quality, well dressed all well seasoned local wood battened shutters ledged and braced in doors and windows,with oxidised iron fittings such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand blocks as per sclredule. taxes and royalty all complete as per building specification and direction of E/l

Supplying,fitting and fixing 30mm thick solid core type non-decoralive double leaf 1/3rC glazed flush shutter in windows with black board core blended with quality phenol formal.

STEEL WORK

Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

TMTC-500 8mm dia

TMTC-500 10mm dia

TMTC-500 12mm dia

TMTC-500 16mm dia

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.SHED

Hot finished seamless type tubes SHED

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. SHED

Providing and fixing bolts including nuts and washers complete. SHED

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Carriage of materials:-

A. CEMENT

B. SAND

C. SAND LOCAL

D. STONE CHIPS

E. BRICKS

F. STEEL

ELECTRICAL WORKS

Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.

Group C

Twin control Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for twin control light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with 2 way modular type switch, modular plate, suitable size of GI box etc as required.

S/F Ceiling Rose :-

S/F Modular type electronic fan regulator :- Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

Supply, fitting, fixing and testing of 1200mm Sweep, double ball- bearing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod all accessories as required.

Supply of 300 mm, 230V A.C exhaust fan.

Supplying and fixing Surface mounted 15/18 watt LED downlighter complete with integrated electronic driver & LED directly on ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.

15/16 Watt LED Bulb

LED FLOOD LIGHT 75/80W

S/F light plug point with modular type accessories :- Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required.

S/F Modular type Switch/ Socket (15/16 amps):- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required.

5/6 AMPS Switch

S/F Modular boxes, base & cover plate :- Supplying and fixing following size/ modules G.I. box along with modular base & cover plate for modular switches in recess etc as required.

1/2 module (78mm x 78mm x45mm)

4/5 module (78mm x 140mm x50mm)

6 module (78mm x 205mm x 50mm)

S/F Modular type blanking plate :- Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required.

EARTHING PROTECTION

G.I. earth plate electrode :- Earthing with G.I. earth plate 600mm x 600mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc as required.

Salt/ Charcoal for plate earth electrode:- Extra for using salt and charcoal for pipe earth electrode as required.

P/F 25mm x 5mm G.I. earth strip in surface/ recess :- Providing and fixing 25 mm X 5 mm G.I strip on surface or in recess for connections etc., as required.

S/L 25 mm x 6 mm G.I. earth strip in ground :- Supplying and laying 25 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.

LIGHTNING PROTECTION

P/F G.I. lightning conductor finial :- Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Reverting sweating and soldering lighting conductor tape :- Reverting sweating and soldering of copper/G.I. tape (with another copper/G.i. tape, base of the finial or any other metallic object) as required.

P/ F G.I. Lightning conductor tape in horizontal run :- Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run).

P/ F G.I. Lightning conductor tape in vertical run :- Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run).

Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring washers etc. complete as required.

Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

SUPPLY OF LT CABLE

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required.

3.5c x 95 sq.mm

LAYING OF LT CABLE

11 KV cable laying upto 120 sq.mm. in same trench :- Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

3.5c x 95 sq.mm

1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.

3½ X 95 sq. mm (45mm) Office Building

Hume Pipe for Cable protection:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

3½ X 95 sq. mm (45mm)

S/F T.P. MCB DB:-

Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus- bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.

4 Way (4 + 12), Single Door, Horizontal type

6 Way (4+18) Single Door, Horizontal type

S/F 'C' series, MCB:-

Supplying and fixing following 415/240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. As required.

50/63 amps TPN

40 amps TPN

6/32 amps SPN

S/F TPN RCCB

Supply and fixing following rating, TN&N, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SUBMAIN WIRING COPPER IN PVC CONDUIT

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.

4R X 6 sq. mm + 2R x 6 sq.mm Earth Wire

4R X 10 sq. mm + 2R x 10 sq.mm Earth Wire

CIRCUIT WIRING COPPER IN PVC CONDUIT FOR (15 A) SWITCH & SOCKET:-

Wiring for light/ power plug with 2X4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1Nos 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

CIRCUIT WIRING COPPER IN PVC CONDUIT FOR 5A & SWICTH BOARD:-

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.

2R X 2.5 sq. mm + 1R x 2.5 sq.mm Earth Wire (Switch Boards)

Sanitary Works

Supplying, fitting and fixing 40mm high vitreous white glazed ware E.W.C. with "p" trap of parry/hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make and complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle cock of approved qualty weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and White/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat

(I) With s trap

Supplying fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of Hindustan "Parry" or any other approved ISS make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams 15 mm P.V.C /Alkthene pipe 450 mm long with bras coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor, making good the same etc all complete as per specification and direction of E/I .

Flat back or standing corner (600x350)

Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Supplying, fitting and fixing H.C.I. pipes with ear of approved make conforming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yarn for making lead caulked joints, cutting pipes to size including earth woek or scaffolding where necessary etc. all complete as per specification and direction of E/I.

100mm dia

75mm dia

Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earthwork or providing scaffolding as the case may be all complete as per specification and direction of E/I.

H.C.I. Heal Rest bend(I) With s trap

100 mm dia (wt. 5.5 kg. app)

80 mm dia (wt. 4 kg. app)

d) H.C.I. double junction with door and ear

100 mm dia (wt. 15.5 kg. app)

80 mm dia (wt. 15.5 kg. app)

i) H.C.I. shoe with ear

100mm dia (wt. 5.5 Kg appx.) (NSI)

80mm dia (wt. 3.75 Kg appx.) (NSI)

Floor trap with grating

80mm dia

Norton patent H.C.I. Cowel

100mm dia (wt. 3.25 Kg appx.)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

110 mm diameter

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single pushfit Coupler

110 mm diameter

Single tee with door

110 mm bend

Shoe (Plain)

110MM SHOE

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm dia

20 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all- round S.W. pipes including bed concrete as per standard design :

100 mm diameter S.W. pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

20 mm nominal bore

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Boring

Cost of drilling 200mm x 165mm x 125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic DTH Rigmachine ,all complete including supplying all materials, tools ,drilling rig,Air compressor and equipments ,as well as fuel,lubricants and cost of transportation of Rig machine and other vehicles up to the site. (I) From 0-50 meter

(II) From 51-125 meter

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Supplying,tools tackels & lowering of 200mm dia MS Erw Casing Pipe Of 6mm wall thickness including welding charges , cost of Pipe etc including all taxes, vat, Excise duty,freight charges with inspection charges etc as applicable,etc all complete job

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete,for all depths, as per direction of engineer -in-charge :

100 mm nominal size dia

150 mm nominal size dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete : 150 mm clamp

150 mm nominal size dia

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying all materia. Labours,tools & equipments for fitting & fixing 200 mm dia MS cap over casing Pipe Complete job.

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore :

Horizontal

Vertical

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

submersible pump set 100mm dia (with polypropylene/nory impeller) up to 20 stage. 5 HP

Supplying XLPE /PVC insulated,armoured cable 1100 v grade with ISI mark Three and half core standerd aluminium conductor with 6 mm thick 25mm width M.S spacer with G.I earth wire 6 mm thick 25mm width with G.I earth with 6 sq mm , complete in an approved manner. 3.5 core 25 sq mm

STARTER

Septic Tank

Earth work in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees,, shrubs all complete as per approved design, building specification and direction of E/I.

(i) Septic tank

Providing coarse clean sand in filling in foundation trenches or in plinth & floor including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

(i) Sloping portion 1:20

Providing designation 75A brick work in C.M (1:4) in foundation and plinth -do-

(i) Long wall

(ii) Short Wall

(iii) Partition wall

(iv) Partition wall

Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

twelve(12)

Providing 19mm thk. Water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other water proofing compound including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in stair case with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including centering, shuttering, screening, mixing cement concrete in mixer placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

(i) Roof cover slab of septic tank

Providing R.C.C.M-200 with nominal mix of (1:1:2) in beams with approved quality of stone chips 20mm.to 6mm. Size graded and clean coarse sand of F.M. 2.5.to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, as per building specification and direction of E/I.

(i) Rcc Beam in septic tank

TMTC-500 8mm dia

(i) C.I. cover and frame 300 x 300 mm inside

(ii) S.C.I. plain bend 100 mm dia

(iii) S.C.I. Tee 150 mm dia

Recharge Pit

Jungle clerance in borrow area,building premises flanks and slopes on the roads,canals and ambankment by removing the grass and the jungle bushes from the top including weeding out shrubes including roots and leveling etc. Complete as per direction of E\L. (Specification revised in the metting of regional CO- ordinators held on 11.01.84 in the office of T.E.C.

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts. Leveling ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Recharge pit 1 No

Extra for earthwork in hard soil as per specification and direction of E/I. (vide classification of soil item B)

Supplying labour and equipments for digging well (vide classification of soil items C) with chisel and hammer including disposal of excavated materials and stacking the spoils to safe distance at 50 metre all complete as per specification and direction of E/I.

4"dia 50 M deep driling rate approved by T.R.C Letter no. 42dt .27.07.7 F-65

Drilling upto 30 M depth below G.L in rural area

Drilling upto 60 M beyond 30 m below G.L in rural area

Supplying laying boulder in rock toe,heel trenches of the dam as per design ,drawing including the cost of materials all complete as per specification and direction of E/I

Supplying and laying good quality of stone metal filter (20mm to 6mm size) in rock toe,heel trenches ,tee drain as per design drawing including the cost of materials all complete as per specification and direction of E/I

Supplying and laying sand filter flanking in horizontal portion of the dam as per design and drawing with watering compaction including cost of sand ,royalyty etc,but. Excluding the cost of carrige all complete as per specification 0

Providing P.C.C. M-100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade-III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-in-charge.

Providing rough dressed randum rubble stone masonry in cement mortar 1:4 in foundation -do-do - complete job as per specification and direction of e/i

Providing tuck pointing in cement on stone masonry (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12 mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475 mm G.I. Cover with frame (weight not less than 36 kg.) along with earthwork in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Labour for laying fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and bariier etc. all complete as per specification and direction of E/I. 250 mm dia R.C.C. spun pipe Upto 3.0 metre depth of invert below G.L.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

M.S. pipe 150 mm dia casing pipe

Supplying labours and tools for laying and jointing U.P.V.C. pipe in trenches and making joints with U.P.V.C. collar and solvent cement, including providing night guard, barrier & red light to safe guard against accident, all complete as per specification and direction of E/I. (b) 110/ 100 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. (i) 100 mm dia

carrige of materials

Boulder

Stone matel

HORTICULTURE

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 3 km lead complete (earth measured in stacks will be reduced by 20% for payment)

Supplying and stacking sludge at site including royalty and carriage upto 3 km lead complete (sludge measured in stacks will be reduced by 8% for payment).

Rough dressing the trenched ground including breaking clods.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in- charge.v

Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Michelia champa (Golden Champa)plant of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer- incharge.

Supply and stacking of Azadirachta indica ( Neem ) plant of height 120130cm in big polybag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Mangifera indica (Mango-grafted ) plant of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer- incharge.

Supply and stacking of plant Tabernaemontana divaricata (Chandni double) of height 45-60 cm in earthen pots of size 20 cm as per direction of the officer-in-charge.

Supply and stacking of Quisqualis indica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

Supply and stacking of plant Hibiscus rosasinensis of height 45- 60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.

NON-SCHEDULED

CIVIL WORKS

Supplying, fixing and installation of PVB glass of 12-20 mm thick with complete fitting like clamp,hinges etc. All complete as per the specification and director of engineer-in-charge. (Make - saint Gobain, Dhanlaxmi,Jewel Tuf)

Tata sheet SHED

ELECTRICAL WORKS

Supplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required.

Supplying and fixing batten/ angle holder including connection etc. as required.

POWER DISTRIBUTION BOARD FOR AUXLIARY LOADS (PDB-1)

Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Aux.Power dist. Boards( Aux.PDB) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.

The PDB-1 shall broadly comprise of the following equipment/components)

Incoming Feeders:-

100A TPN , MCCB , 16 kA - 01 No.

Outgoing Feeders:-

63A TPN MCCB - 02 No.

63A TPN MCB - 04 Nos.

40A TPN MCB, - 08 Nos.

200A TPN Aluminium bus bar in metal encolsure with fixing clamps

Indication lamps(On- Off Trip Power On -- RYB)

Supplying, Installing, Testing & Commisioning cost of Power Distribution Boards (PDB-1) all complete with all necessary items as per direction of E/I.

FEEDAR PILLER

Sanitary work

Providing and fixing Coat Hook of approved quality.

Supplying,Storing,handling,shifting,installation,t esting and commissioning of CP flxible hose, spary wall flange etc.complete (1) Kerovit make (model-KA580002).(2) Hindware make model-F1600002)Rs.=1570.(3) Parryware Make (Model-T9941A1) Rs.=1600

Providing and fixing straight type macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of Mcalpine,UK with intergral single mould sealing fins made of flexble EVA body,including bush/adoptor for use with C.I Pipe as supplied with the pan connector.

HIGH MAST LIGHT

Add GST 12%

Add Labourcess 1%

BIRENDRA DUBEY BUILDCON PVT. LTD