10/2021-22(EDCR) Releasing new connection 300 KVA-HV-2 of M/S M S Pannel and F Door village Koyla Nanital Road, Rampur connected Sub Station Bilaspur Gate, Rampur under EDD-I, Rampur under Deposit Scheme.

Amount

Carriage of the following material from Store Centre, Majhola to work site including loading & unloading.

8.5 Mtr Long PCC pole

11 Mtr Long ST pole

11 KV VCB O/G CTR 200/100/5A

11 KV CT/PT Unit

11 KV Pilfer Proof Metering Cubical

ACSR weasel conductor/XLPE Cable & other line material such as X-arm, guarding angle etc.

Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms. a) Single support

8.5 Mtr PCC pole

11 Mtr long ST pole

Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size. b) Double pole structure

8.5 Mtr PCC pole

11 Mtr long ST pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

8.5 Mtr PCC pole

11 Mtr long ST pole

b) Double pole structure

8.5 Mtr PCC pole

11 Mtr long ST pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Laying, sagging, stringing and binding etc of 11 KV line with ACSR Weasel Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Digging of Trench of size 1050x750mm for laying 11 KV cable as per RESPO Norms and as per direction of Supervising Engineer.

Safely laying of 11 KV 3x120 sqmm XLPE cable(Double Ckt) as per RESPO Norms and as per direction of Supervising Engineer.

Laying of 1st class Bricks along the length on both side of 33 KV XLPE Cable in cab trench & on top of the each cable including providing & filling River sand inside the Bricks as per RESPO Norms and as per direction of Supervising Engineer.

Laying of 11 KV 3x120 sqmm XLPE Cable in the air and mounting and clamping 11 KV XLPE cable Boxes on double pole structure and making connection with 11 KV over head line at both end as per RESPO Norms and as per direction of Supervising Engineer.

Safely laying of 11 KV 3x120 sqmm XLPE cable Overhead from S/S National Highway(Single Ckt) as per RESPO Norms and as per direction of Supervising Engineer.

Safely laying of 11 KV 3x120 sqmm XLPE cable Overhead at road crossing johar Chauraha (Double Ckt) as per RESPO Norms and as per direction of Supervising Engineer.

Filling and fixing Cable Box as per RESPO Norms and as per direction of Supervising Engineer.

Guaring between two poles like singhle poles, double poles, four poles etc. to guarding L.T. 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire No. 6 SWG and G.I. wire No. 6 SWG, including cutting with fabrication and fixing of guarding croll arm with clamp, nut & bolts etc as per drawing

Wrapping of barbed wire on Poles as anti-climbing device for a length of 0.9 mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75 mtr. From the ground complete with providing and fixing of lower end fixing of lower end & upper end clamps made of M.S. Flat 40x5 mm complete with nuts & bolts.

Fixing of danger board

Mounting of CT/PT on double pole including making connection etc.

Erection of 11 KV Pilfer proof metering

Erection of 1 No. I/C Switchgear, 4 Nos O/G switchgears 1 No I/C control panel in alignment, in Control Room, including sage shifting from Dump place making 4 Nos Pockets for each and Providing/fixing of Reg Bolt by CC in ratio 1:2:4 with rightening also.

commissioning & fixing Bus bar(copper), between each switchgear, by bolt, nut & washers jand HT compound and proniding & tapping HT Tape Empire Tape & PVC Tape on each Joint.

Cutting and drilling of holes of 11 KV Channels/Angles/X-Arms/Guarding Angles:-

11 KV X-Arm

T-Off Channel

Channels/Angles

Providing as per RESPO Norms and Fixing Clamp as per direction of Supervising Engineer.

Clamps of X-Arms

Clamps of T-Off

Stay Clamp

F-Brackets.

E-Brackets.

Clamp for Double Poles

M/s Navyug Traders

Cosmic Enterprises

M/S RAHAT & BROTHERS ELECTRICALS

M/S VIDYUT MAZDOOR KALYAN SAMITI