Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.5 L+₹2.0 L (5.58%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹44.9 L+₹9.3 L (26.3%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Aman Bhardwaj
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No.1 Jamnagar 361 003
REPAIR TO WOODEN, STEEL, ALUMINIUM JOINERY INCLUDING DOORS, WINDOWS, ROLLING SHUTTER, STEEL GATES, COLLAPSIBLE GATES ETC AND OTHER CONNECTED REPAIRING WORKS IN TECH AREA AT AF STATION JAMNAGAR
2022_MES_555624_1
8185/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Jamnagar
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar NO. 1
₹80,000
Yes
24 Nov 2022
1 Oct 2022
1 Nov 2022
1 Oct 2022
29 Oct 2022
15 Oct 2022
Amount
Taking down top assembly complete (except curtain & side bracket) of rolling shutter area not exceeding 10 square meter each, push pull or manual type and re-fixing the same in same position after necessary repairs such as cleaning, oiling, greasing, cleaning of the side guided channels, replacement of rusted nuts and bolts, including replacement of rusted profiles and welding / grinding as required for proper and smooth function. Note: (i) Unserviceable spare part such as suspension shaft, spring, ball bearing etc if found unserviceable will be replaced with new one and the same will be measured & paid separately as supply only under respective items of this Sch (ii) Gear box assembly if found unserviceable will be replaced with new one and the same will be measurable & paid separately as supply & fix in repair under respective items of this schedule.
All as per item No 1 above including notes but area exceeding 10 Square meter but not exceeding 20 Sqm each
Supply only steel ball bearing suitable for rolling shutter. Make: SKF, NBC, TATA
Supply only 40 mm bore galvanised heavy duty pipes conforming to IS - 1161-1968 as in suspension shaft for rolling shutter, cut to size including necessary drilling / grinding etc complete
Supply only 50 mm bore galvanised heavy duty pipes conforming to IS - 1161-1968 as in suspension shaft for rolling shutter, cut to size including necessary drilling / grinding etc complete
Supply only helical type high tensile wire steel spring conforming to IS-4454 (Part-I) 1975, Gd-2 suitable for rolling shutter of size exc 5 Sqm but n.exc 10 Sqm.
Supply only helical type high tensile wire steel spring conforming to IS-4454 (Part-I) 1975, Gd-2 suitable for rolling shutter of size exc 10 Sqm but n.exc 20 Sqm.
S&F in repair mild steel Safety lever locks sutaible for rolling shutters.
Taking down guide channel of any size and supply & fix guide channel of size 75 mm deep fabricated with 3.15 mm thick plain black sheet for rolling shutter including necessary welding all as per IS-6428 (1979) including painting of guide channel with 2 coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.
Supply and fix Gear box assembly for rolling shutter of any size including rod, required nuts, bolts, cleats, crank handle etc, complete of standard make and fixed in position including one shop coat of primer including removal of old gear box assembly and other accessories all as directed.
S&F in replacement Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, and applying a coat of synthetic enamel paint, including taking down old Collapsible steel gates complete
Supplying, fabricating and fixing cladding on steel gate (for all height, outer surface) of aluminium composite panel in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick, mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, fixed over and including base frame fabricated with aluminium sections and weather silicone sealant for groove filling, backer rods etc. complete all per manufacturer instruction & as directed.
M&L for lettering with chromium plated steel sheeting 1mm thick and of size exc 15cm n.exc 25 cm each letter including fixing on pillars, posts etc to all as directed
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for pre-painted galvalume aluminum Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges etc fixed with self drilling screws as specified
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410-W(Gde-E-250) quality-B) including distance pieces, cleats etc.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
S&F rolled mild steel Fe 410-W (Gde-E-250) quality-B in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
Demolition of PQC/cement concrete any description and in any position any thickness below or above ground level, including removal of debris to a distance exc 1.5 km but nexc 5 km
M&L for cement concrete Type C2 (1:3:6) (40mm graded aggregate) in foundations filling and mass concrete
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
S&F false ceiling of Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600mmx 600mmx 4mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T Section (main & cross member) of size 25mm x25mmx1.5 mm thick in square pattern of grid size 600x600mm....
.......The aluminium frame work shall be supported on side wall with use of alumminium 'L' section of size 25x25x1.5mm angles etc. Snap grid shall be supported with hangers of 4mm dia, galvanised iron wire adjusting level fixed to roof slabs/truss etc by means of ceiling cleats made out of galvanised iron flat of size 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed
S&F in repairs mineral Fiber Acoustical suspended ceiling board, size of 600 mm x 600 mm, 16mm thick, fixed to any position of false ceiling complete all as specified and directed
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls over and including a coat of cement based wall care putty
M&L for preparation of new plastered wall surfaces including pilaster/cornices etc and applying two coats of acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer complete all as specified and directed
M&L for complete removal of existing treatment of old wall surface including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spouts and cleaning with water complete and applying two coats of acrylic emulsion (exterior weather coat) paint in camouflage pattern of any tint as approved over one coat of primer complete all as specified and directed
M&L for preparation of old decorated plastered surfaces of walls and applying two coats of oil bound distemper
M&L for preparation of old decorated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)
S&F in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutter glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass, and wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc all as specified below, complete all as specifed including taking down old window.
(a) Frame (top & side ) section shall of size 92.00x31.75x1.50mm (Section o 20831). (b) Frame (bottom) section shall of size 92.00x31.75x1.50mm (section No 20832). (c) Top & side members of shutter section shall be of size 18.00x40.00x1.55mm (Section No 20738). (d) Shutter interlock section shall be size 18.00 x 40.00x1.45mm (Section 20737) (e)Bottom members of shutter section shall be size 18x40.00x1.55mm (Section No 20736) Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mentioned in Appx B to Particular Specifications
S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with alumimium section of size 82.50mm x 38.00mmx1.5mm thick (Cat No 20036), half portion glazed with 4mm thick frosted glass including rubber beading & glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including alumimium louver patti including SS wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mentioned in Appx B to Particular Specifications.
S&F in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5mm thick tinted glass and partly panelled with 9mm thick prelaminated particle board with both side decorative laminated including rubber bead, joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size etc including taking down of old frame with shutter of any size all as specified and directed
(a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021) (b) Vertical members of shutter section shall be of size 85.00 x 44.45x2.00mm (Section No 19560) (c) Top members of shutter section shall be of size 83.50 x 44.45x2.00 mm (Section No 19596) (d) Lock rail (middle member ) of shutter section shall be of size 150.00x44.45x3.00 mm (Section No 19596) (e) Bottom member of shutter section shall be of size 150.00 x44.45x3.10mm (Section 19584) (f) Glazing clip for securing glass of shutters shall be of 0.80mm thick (Section No 19370). Note : Section No given above are of make Jindal, contractor may use similar section of other make mention in Appx B
S&F in repairs aluminium partition wall of section as in frame / single double grove of size 63.5 x 38.1 x 2mm thick of make Jindal or equivalent make as specified in Appx 'B' to PS, including 5mm thick tinted glass, 20mm thick pre-laminated particle board with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6mm thick including making good to existing surface complete all as specified and as directed by Engr-in-Charge.
S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S&F flush shutters 40 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F extruded aluminium alloy handles, 150 mm size, fabricated type, anodised
S&F aluminium anodised, barrel tower bolts, 150 mm size, of extruded section and fixed
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
Demolition of floor, hearth or wall tiling or stone slab laid , bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 2 km complete
M&L for Non - skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick
M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick backing coat in cement mortar 1:4
M&L for light shade ultra charged virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick
M&L for light shade ultra charged virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting / dado etc set, jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick backing coat in cement mortar 1:4
M&L for 25 mm thick cement concrete type B- 1, 1:2:4 (20mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like set and jointed in cement paste including 10mm thick backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Dismantling boarding, any description, fixed in any position with screws
S&F 12 mm thick plywood (7 Nos of ply )grade BWR, type BB fixed width screws to timber frame work or ply wood including 2nd class HW fillets of bullnose splayed, chamfered or rounded edge etc. exc 3 and n.exc 6 sqcm
S&F 18/19 mm thick plywood (12 Nos of ply ) grade BWP, type BB fixed width screws to timber frame work or ply wood including 2nd class HW fillets of bullnosed splayed, chamfered or rounded edge etc. exc 3 and n. 6 sqcm
S&F 0.9 mm decorative laminates type I, or surface finish, colour and pattern as approved
S&F stainless steel butt hinges medium grade 75 mm long
S&F stainless steel butt hinges medium grade 100 mm long
S&F stainless steel handle 100 mm long .
M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc
M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 80mm thickness, with minimum compressive strength of 40N/sqm (M-40 ), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid over and including 20mm thick sand screed bed complete
Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc. exc. 25 but n.exc 50 sq.cm.
nasreenenterprise
Nitesh Enterprise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .