Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-Finance 264 2 GALI NO 7 RAM NAGAR ROORKEE DIST HARIDWAR UK | L1 | Accepted-Finance Accepted financial bid | |
| 2 | L2₹38.9 L+₹4.2 L (12.0%)Accepted-Finance D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L2 | Accepted-Finance Accepted financial bid | |
| 3 | L3₹41.5 L+₹6.8 L (19.6%)Accepted-Finance 52 VIJAY COLONY NEW CANTT ROAD DEHRADUN UK | L3 | Accepted-Finance Accepted financial bid | |
| 4 | Rejected-Technical VILL BHANGERI PO ROORKEE PIN 247667 | HARIDWAR | UTTARAKHAND | 247667 | - | Rejected-Technical No remarks given in WLR of HQ CECC for QE Sep 2021 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Roorkee
Garrison Engineer Military Engineer Services Roorkee
COMPREHENSIVE MAINT TO CERTAIN BUILDINGS IN PURKAZI AREA UNDER AGE BR I IN GE ROORKEE
2022_MES_534249_1
8392/167/E8
Open Tender
Civil Works
Item Rate
180 days
Roorkee
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Roorkee
₹96,000
13 Aug 2022
28 Jun 2022
2 Aug 2022
28 Jun 2022
26 Jul 2022
12 Jul 2022
Amount
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .
M&L for brick work in cement mortar (1:6) using old size sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius complete all as specified and directed.
M&L for brick work in cement mortar (1:4) in half brick thick walls using old size sub class ‘B’ bricks straight or curved on plan in any radius complete all as specified and directed .
Demolition of cement concrete/tiles/kota etc (un-reinforced) of any description along with sub base in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.
M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, path, plinth protection and the like, laid in alternate bays n.exc 2.50 Sqm and joints filled with mastic filling including finishing even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick cement concrete (1:4:8) type D- 2, (using 40mm graded stone aggregate) as in sub base / leveling course etc complete all as specified and directed.
M&L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm thick screed bed 1:6 CM complete all as specified and directed.
M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed.
Supply and laying dry river sand in 25 mm thick layer for cushioning to interlocking paver block complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm with marble border including rubbing and polishing complete all as specified and directed.
All as per item No 10 above but for skirting with 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L Makrana white Marble tiles 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing over and incl 15mm thick cement screed bed in CM 1:6 including dismantling complete all as specified and directed.
M&L for 40mm thick, PCC type B1, 1:2:4(20mm graded stone aggregates) as in floor finish surface even and smooth using extra cement complete all as specified and directed.
M & L for Non - skid vitrified heavy duty paver colour tiles 8 to 10 mm thick size 300x300mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:4 incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for non-skid ceramic joint free coloured tiles 7 to 8 mm thick (Square / rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for vitrified ceramic double charged, 10 mm thick light shade tiles (square/ rectangular) polished, area of each tile not exc 0.36 Sqm, laid over and including 15mm thick screed bed in cement mortar (1:6) in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for vitrified ceramic double charged, 10 mm thick light shade tiles (square/ rectangular) polished, area of each tile not exc 0.36 Sqm, laid over and including 10mm thick rendering coat in cement mortar (1:4) in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic joint free coloured tiles of size 450X 350X 7 mm/ 450x 300 x7mm thick as required, laid in vertical surfaces as in dodo, skirting etc over and including 10mm thick screed bed/backing in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M & L for Glazed ceramic tiles vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10 mm thick screed bed in CM 1:4 incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for non-skid ceramic joint free coloured tiles 7 to 8 mm thick (Square / rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floors etc, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in levelling course under floor finishes, bed block for inserting hold fast and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
Taking down cement or cement lime plaster from brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for 15 mm thick rendering on external wall/concrete surface with cement mortar 1 : 4 finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for 5 mm thick rendering on ceiling with cement mortar 1 : 3 finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed.
M & L for preparation of old decorated surface of walls including washing, rubbing down and stopping and applying one coat of distemper oil emulsion incl preparation of surface complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement base paint complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M & L for preparation of old decorated surfaces of ceiling including cornices etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including connection etc including taking down old tubing complete all as specified and directed.
S&F in repairs, 20mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified complete all as specified and directed.
Dismantling and taking down existing water tank and S&F Rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) triple layer of 500 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.
All as per item No 36 above but 1000 ltrs capacity.
S&F in repairs ball valves of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms . / 25mm-455gms/ 40mm - 690 gms)
S&F in repairs of bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed of 15 mm bore complete all as specified and directed.
S & F in repair 15 mm bore stop valves/ angle valve of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 90 Gms) complete all as specified and directed.
S & F in repair 20 mm bore stop valves/ angle valve of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 92 Gms) complete all as specified and directed.
S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.
S & F wall Mixer with 115 mm bend pipe complete all as specified and directed. (MODEL :COS-103273 Make : ESSCO (Jaquar) Model No 7775 of Prayag , Model No PLU-398 Sparsh pearl, Model No F2002401 of CERA).
S & F in repairs brass CP mixer (arial single lever basin mixer) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. (Model :COS-103011NB Make : ESSCO (Jaquar) Model No 7750 of Prayag , Model No PLU-396 Sparsh pearl,Model No F2002461of CERA).
S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. (MODEL :MQT-511KN Make : ESSCO (Jaquar), Model No 7706 of Prayag, Model No PLU-385 Sparsh pearl, Model No F2002151of CERA).
S & F in repairs stop/angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (Model : COS-103053/MQT-513KN Make : ESSCO (Jaquar) OR EQUIVALENT RANGE OF Prayag, JAQUAR, Pearl).
S & F in repairs chromium plated brass stop cock fancy type (Concealed Stop Cock incl exposed Part of Concealed Stop Cock) screwed both ends high pressure for 15 mm bore size iron pipe or ferrule complete all as specified and directed. (Model :MQT-514KN Make : ESSCO (Jaquar) Model No 7718 of Prayag , Model No PLU-390 Sparsh pearl,Model No F2002361 of CERA).
S & F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 190 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed. (Model :EOS-542A Make : ESSCO (Jaquar)l OF Prayag, JAQUAR, Sparsh pearl).
S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and directed. (Model : COS-103001N Make : ESSCO (Jaquar)/ Pryag Cat No-6602/ Pearl Cat No-EAR-281).
S & F in repairs Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed. (Model : ALD-573, Make : Jaguar , CERA F8030103, Prayag Cat No BEA-100).
S&F in repairs, PVC connection 450mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs, PVC connection 600mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.
S&F in repairs, vitreous china squatting pan 'Orissa pattern' long pan of size 580x440mm white, with integral footrest & 'P' or 'S' trap including connection to trap, flushing pipe, anti-syphonage pipe etc and making good the floor to match with the existing surfaces complete (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing flooring complete all as specified and as directed.
S&F in repairs, vitreous china wash hand basin, oval type white flat back size 550 x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket painted with 02 coats of synthetic enamel paint over 01 coat of red oxide primer etc complete all as specified and directed.
S&F Vitreous China urinal half stall type white (minimum) with CP waste fitting grating and union for discharge pipe (excluding flusing cistern, flush pipe ) including urinal spreader of CP and PVC waste pipe of adequate length complete all as specified and directed.
S&F in repairs, plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.
S&F in repairs, brass CP toilet paper holder and fixed complete all as specified and directed.
S&F in repairs, 32 mm dia bore and 750 cm long PVC waste pipe for WHB etc complete all as specified and directed.
S&F in repairs, brass chromium plated 600mm long and 20mm dia towel rail 'D' type, ISI marked fixed to wall with CP steel screws etc complete all as specified and directed.
S & F in repairs mild steel chromium plated grating (round) 125 mm dia fixed in cement mortar 1:3 over floor/nahani trap (with hole and without hole) complete all as specified and directed.
S&F in repairs, stainless steel sink without draining board, made out of 1.00mm thick stainless steel sheet for kitchen or laboratory, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, with plug, waste fittings, waste pipe, washers including cantilever type cast iron brackets, connecting union etc complete all as specified and directed.
S&F in repairs, stainless steel plate rack of overall size 24” X 30” X 10”, made out of 0.63 mm thick stainless steel sheet and fixed in postion complete all as specified and directed.
S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including mild steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F PVC (SWR) bends suitable for 110mm bore pipe complete all as specified and directed.
S&F PVC (SWR) bends suitable for 75mm bore pipe complete all as specified and directed.
S&F PVC (SWR) single 'T' (equal or unequal) suitable for 110mm bore pipecomplete all as specified and directed.
M & L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed .
Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed .
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed .
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed .
S & F 2 nd class hard wood plain solid, straight chowkhat and frame rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed .
S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides incl rubber door cills complete all as specified and directed.
S&F 35 mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
S & F 30 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc. with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed .
S & F 30 mm thick 2nd class HW glazed/ gauged skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc. with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b) and fitted to chowkhat complete all as specified and directed .
S&F 250 mm size mild steel sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts of stainless steel complete all as specified and directed.
S&F 100mm size mild steel butt hinges, ISI marked medium weight cold rolled, fixed to wooden chowkhat with screws or welded to steel frame at any floor upto four storied buildings and making functional complete all as specified and directed.
S&F 150mm size mild steel barrel tower bolts, ISI marked stove enamelled black with bright bolts and fixed welded complete all as specified and directed.
S&F 75mm size mild steel barrel tower bolts, ISI marked stove enamelled black with bright bolts and fixed welded complete all as specified and directed.
S&F 150mm size mild steel pressed handles, ISI marked oval type, stove enamelled black complete all as specified and directed.
S&F 100mm size mild steel pressed handles, ISI marked oval type, stove enamelled black complete all as specified and directed.
S&F in repairs, 250 mm size mild steel sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts of stainless steel complete all as specified and directed.
S&F in repairs, 100mm size mild steel butt hinges, ISI marked medium weight cold rolled, fixed to wooden chowkhat with screws or welded to steel frame at any floor upto four storied buildings and making functional complete all as specified and directed.
S&F in repairs, 150mm size mild steel barrel tower bolts, ISI marked stove enamelled black with bright bolts and fixed complete all as specified and directed.
S&F in repairs, 150mm size mild steel pressed handles, ISI marked oval type, stove enamelled black complete all as specified and directed.
M&L for runing welding in repairs, thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screws/plugs to brick walls complete all as specified and directed.
S&F 100mm size PTMT butt hinges and fixed complete all as specified and directed.
S&F 200mm size PTMT tower bolt and fixed complete all as specified and directed.
S&F 125mm size PTMT door handles and fixed complete all as specified and directed.
S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.
S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay without glazing bars dovetailed or welded complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
S&F 0.80mm thickness Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
S&F in repair steel rolling shutters, 1.25mm thick lath with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type including taking down rolling shutter complete all as specified and directed.
Taking down of steel rolling shutters, and repairs lath with out ball bearing, as specified including repairs to top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, and refixing of same opening complete all as specified and directed.
S&F 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs, 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane including hackingout old broken glass etc complete all as specified and directed.
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .
S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .
M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repairs,stainless steel peg set of six complete all as specified and directed.
Easing of wooden window shutters / CB shutters (One unit shall comprise of one window / CB / Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts, sliding bolt etc complete all as specified and directed.
Easing of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing / opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts, sliding bolt etc complete all as specified and directed.
Easing of steel window shutters (One unit shall comprise of one window shutter irrespective of number of leaves) for properly closing / opening, welding of hinges or handles (including of handles/ hinges if required) or changing the position of hinges, complete all as specified and directed.
M&L in repair for 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice & other side balancing white lamination, fixed with screws to frame work as in cupboard shutters, shelves incl wooden beading at ends and sides complete all as specified and directed.
S & F Continuous (piano) hinges, Width of flaps 30mm(when open) in mild steel, bright finish or electro galvanised complete all as specified and as directed.
M&L 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section, fixed in framed work in any position complete all as specified and directed.
M&L for mild steel framed work as in roof trusses (framed), trussed purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing using beam, tee, angle, channel or hollow section conforming to Fe 410-W Gde E- 250 quality A including distance pieces, base plate, nuts/ bolts, cleats etc complete all as specified and directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts including dismantling of existing AC roof sheeting complete all as specified and directed.
S&F 6mm thick two piece AC serrated ridges for corrugated sheet with 'L' type or 'J' type hook or cranked bolts including dismantling of existing AC roof sheeting complete all as specified and directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling of existing AC roof sheeting complete all as specified and directed.
S&F in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of existing AC roof sheeting complete all as specified and directed.
S&F in repairs, door closer hydraulically regulated, alluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.
S&F in repairs, double action floor spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty complete all as specifies and directed.
M&L for Designer ceiling board 4mm thick with GI framed work of size 4mm main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24x24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, ceiling boards 60cmX60CmX4mm thick, suspended with GI wire 3mm dia and up to 2 mtr long complete incl plugging in brick walls with steel rawl plugs @ 600mm C/C including dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillet and removal from site for taking into schedule of credit complete all as specified and directed.
Providing and fixing PVC SHEET WALL PANELLING of thickness 5mm (+0.25) consisting of panels of desired size stuck on inner frame work of 50 mm wide strips of 5mm(+0.25) thick prelam PVC sheet. The Panel and strips shall be of 600 kg per cum density manufactured by an ISO-9000 certified company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10 inch between two PVC strips.
The PVC strips shall be fixed to the wall using 65 mm long M.S.screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of wall. Optionally a strips of 5mm (+0.25) thick PVC sheet of width 75mm feathered at the edges shall be stuck at places where two panels are joined, using solvent cement, including dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillet and removal from site for taking into schedule of credit complete all as specified and as directed.
S&F self adhesive flash strip of 50mm wide suitable for packing of holes/ cracks of AC sheet complete all as specified and directed.
S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S & F in repairs ss foldable towel rack 2 feet long fixed to wall ss screws etc complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators, partition walls with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
M&L powder coated aluminium door shutters, aluminium section of following size top rail, 100mmx44mm middle rail 150mmx44mm and bottom rail of size 150mmx44mm, including 01 no mortice lock, necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges if required, anodised aluminum snap beading screws etc. required complete all as specified and directed.
Supply and fix aluminium powder coated window frame with shutters sliding pattern consisting of three tracked frame and 03 shutters(2 shutters glazed with 4mm thick plain glass fixed with suitable EDPM rubber beading and one shutter with steel mosquito proof wire cloth made of 0.45mm nominal dia wire and average aperture1.4mm) including necessary handles, locking arrangements for shutters complete all as specified and directed. Note: The Section for window bottom shall be L 20977, Top and sides shall be 21137, shutter top and bottom shall be 20567 and shutter sides shall be 20738 or equivalent in Hindalco or Indalco.
S&F 5mm thick sheet glass, ordinary quality and glazing with neoprane beading to aluminium frame exc 0.5 Sqm in each pane complete all as specified and directed.
S&F Powder coated aluminium grill DG 202 model with aperture 60mm x 40mm with suitable 'F' or 'E' section fixed to aluminium window frame for securing Deco Grill complete all as specified and directed.
S&F in repairs, factory made prelaminated coloured/ PVC shutter of 18 mm (+0.7) thickness consisting of panel of 18 mm ( + 0.7) thick celuka ply of density 600 Kg / Cbm manufactured by an ISO-9000 certified company using for shutter celuka ply 18 mm( + 0.7) thick cut in desired size of shutter and fixed to frame of kitchen accessory at all four edges of shutter using 13/6 size self tapping steel. The thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc including, magnet, piano hinges including fixing of bascket in kitchen with all fixing accessories etc complete as per directions of GE, manufacturer's specification and drawing complete all as specified and directed.
M&L rendering 15mm thick in CM 1:4 mixed with WPC at 2% by weight of cement on roof surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:- (a) M&L for surface preparation by removal/ taking down of existing treatment of tar felt/ tiling/loose particle to ensure or clean smooth and dry surface and preparing the surface. (b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface.
(c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight not less then 3.0 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction. (e) M&L for providing pond test with filling of water over roof slab continuously for 48 hours all as specified and directed. (f) M&L for providing template of size 450 x 450 mm to each bldg where roof treatment is carried out with marking CA No, date of roof treatment, expiry date, etc all as specified and directed.
M&L 25mm thick PCC type B-0, 1:2:4(12.5mm graded stone aggregates) as in floor/ roof surface complete all as specified and directed.
VINAYAK CONSTRUCTION COMPANY
nautiyalandcompany
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .