PROVN OF PARKING SHED FOR VARIOUS TYPE OF VEHICLES, TILED WATER CHERRY WITH CGI SHED, CHAIN LINK FENCING HARD STANDING AND ROLLING SHUTTER AT VARIOUS LOCATIONS UNDER GE MISSAMARI

Amount

Surface excavation n. exc 30 cm deep and averaging 15cm deep and getting out soft and loose soil complete all as specified and directed.

M & L for Surface dressing n exc.15 cm deep and getting out in soft and loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L brick work with sub-class ‘B’ Bricks (old size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M & L for 100mm thick Cement Concrete Type C-2 1:3:6(Using 40mm graded stone aggregate) as in sub base of Floor/hardstanding, complete all as specified and directed.

M&L for 150 mm thick Cement Concrete Type B2 1:2:4 (40mm graded aggregate), as in sub base flooring finishing cement concrete surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 100 mm thick Cement Concrete Type B1 1:2:4 (20mm graded aggregate), as in flooring finishing cement concrete surface even and smooth without using extra cement, complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

S & F for Flat iron of size 40 x 6 mm as in wind ties conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) 5mm to 10mm diameter of Neck and length of Bolt exc. 5 Cm but not exc. 10 cm with hexagonal or square heads at one end and screwed the other, or screwed both Ends, each screwed End to be fitted with Washers and one hexagonal or square Nut, complete all as specified and as directed.

M&L for MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 and similar work complete all as specified and directed.

Mild steel round bars Fe-410-W (Gde. E-250) 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

Supply only MS galvanised chainlink fencing any size and type complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running rails fixed with angle cleats or other connecting plates conforming to Fe 410 W (Gde E-250) quality-A including welded to rafter,purlin complete all as specified and directed.

Supplying and laying of CPVC pipes outer diameter 32mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc conforming to Fe-410-0 or Fe-310-0.

S&F plates (plain or chequed) channels square or notched (ordinary & counter sunk) with riveted, bolted or welded attachment conforming to gde Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L cement concrete (1:3:6) type C2 using 40 mm stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6, type C-0,(using 12.5mm graded aggregates) as in roof kerbs rounded or chambered on edge complete all as specified and directed.

M&L rendering 20 mm thick in Cement Mortar 1:4 on Brick Walls or Concrete surfaces, plastered surfaces finished Even and smooth without using extra cement with WPC @ 2% by weight of cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L preparing new or old surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of over a coat of alkali resistant priming paint complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Supply only Integral water proofing compound (WPC), conforming to IS and as approved, complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., conforming to Fe 410-W (Gde E-250) quality A, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,complete all as specified and as directed.

S & F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F Ball bearing for rolling shutter complete all as specified.

M&L Non-Skid Ceramic Coloured Joint free Tiles 7mm to 8mm thick, area of each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the tile and including 15 mm thick screed bed in cement mortar 1:6 , complete all as specified and as directed.

M&L Coloured Glazed Ceramic Tiles 350x250x7mm thick in Vertical Surface i.e. dado, skirting,etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles and including 15 mm thick screed bed in cement mortar 1:4 ,complete all as specified and as directed.

M&L Coloured Glazed Ceramic Tiles 200x200x7mm thick in floors etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles and including 15 mm thick screed bed in cement mortar 1:6 ,complete all as specified and as directed.

M&L Plain Cement Concrete (Nominal Mix) 1:2:4 type B2 (40mm graded aggregate) in foundation complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L preparing new plastered surfaces of ceiling and applying three Coats of White Wash, complete all as specified and as directed.

M&L Sand filling under Floors or in Foundations including watering and consolidation, complete all as specified and as directed.

M&L for Machine pressed Precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 80mm thickness M-40 Grade complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 block masinary with solid blocks, exc 10cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M & L for Precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landing, cover slab (for manhole covers, drains etc) set in cement mortar 1:6 complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M/S Himalayan Trading Co

MS Awash Ghosh and Brothers

MS Gautam Construction and CO

bkgeneralstores

Saraswati Auto Works

M/S B.B. Singh Contractor

M/S SUNNY ENTERPRISE

LAXMI & GANESH ENTERPRISE