Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
22 Oct 2026, 12:00 pm
Published by the portal on this tender, for queries and grievance redressal.
DIVIDERS 200MM
SCRIBER 150 MM DOUBLE ENDED
TONG FLAT.350 MM LONG
TIP CLEANER FOR GAS WELDING TORCH RANGE 0.4 mm to 1.6 mm
SPINDLE KEY O2
CO2
C2H2
ARLenth 15cm
UNIVERSAL WELD MEASURING GAUGE
INVERTER BASED WELDING MACHINE WITH ALL ACCESSORIES 300A
OCV 60 100 V
60 PER. DUTY CYCLE
WELD MEASURING GUAGE FILLETRANGE 3.2 mm to 25.4 mm
PUG CUTTING MACHINE CAPABLE OF CUTTING STRAIGHT or CIRCULAR WITH ALL ACCESSORIE
HAND SHEARING MACHINE CAPACITY TO CUT 6MM SHEETS AND FLATS
PORTABLE ABRASIVE CUT OFF MACHINE capacity abrasive wheel 355mm 14 inches
SUITABLE GAS CUTTING TABLE 900x600x750mm
Scriber 15 cm
Air ratchet with standard accessories heavy duty 0.5 INCH
Angle plate size 200x100x200mm
Circlip pliers Expanding and contracting 15cm and 20cm
Copper bit soldering iron 0.25 Kg
Drift Punch Copper 15 Cm
Hand reamers adjustable
Hand Shear Universal 250mm
Scriber with scribing black universal
Spanner D.E. set of 12 pieces 6mm to 32mm
Spanner T. flocks for screwing up and up- screwing inaccessible
Spanner
ring set of 12 metric sizes 6 to 32 mm.
Stud remover with socket handle
Taps and wrenches Metric complete metric set
V Block 75 x 38 mm pair with Clamps
CALIPER HERMACHRODITE.SPRING 15 CM
DIVIDER SPRING 15 CM
DOT PUNCH 100 MM
FILE FLAT 2ND CUT 300 MM SAFE EDGE
Machine Reamer parallel Helical flute 12 16mm set of 5.
Scraper flat 150 mm
Scraper triangular 150 mm
Scraper half round 150 mm
Different Profile gauges Plate type For demonstration Metric standard
KNURLING TOOL DIAMOND
STRAIGHT and DIAGONAL
Indexable boring bar with inserts 1inch shank
LAPPING PLATE 6 inch DIA
DRILLS GUAGE STRAIGHT SHANK LETTER SIZES A TO Z WITH GUAGE
DRILLS GUAGE STRAIGHT SHANK WIRE SIZE 1 TO 60 WITH GUAGE
DIE or DIE STOCK COMPLETE BSP 0.5
DIE or DIE STOCK COMPLETE BSP 0.75 inch
DIE or DIE STOCK COMPLETE BSP 1 inch
Jigs or Fixture sampleFor demonstration May be manufactured in house
PULLEYS FOR V BELT OR FLAT BELT TO FIT ON 50MM DIA. SHAFT WITH KEY SLOT
Steel keys May be manufactured in house to fit with key slot of shaft or pulley
Damaged old spur gear to fit 50mm dia. Shaft
BELT V TO FIT ON PULLEY
BELT FLAT TO FIT ON PULLEY
WASHER
CLUTCH
KEYS
JIB
COTTER or CIRCLIP MINIMUM 25MM SIZE
CARBON STEEL MATERIAL
Drill Drift May be manufactured inhouse 200mm hardened and black finish
BEARING DIFFERENT TYPES EACH TYPE OF DIAMETER 25MM MIN.
LIFTING SLING 8MM NOMINAL DIA. SINGLE LEG SLING
POKER 900 MM LONG
HAMMER PLANISHING
Gauge plug Single ended 5 to 55 by 5 mm.Set of 11 pcs
Lathe tools H.S.S. tipped set.
LATHE TOOLS BIT 6 MM x 75 MM HSS CARBIDE
Lathe tools bit. 8 mm x 75 mm HSS Carbide
Lathe tools bit. 10 mm x 75 mm HSS Carbide
PLUMB BOB 115 GRAMS
BRADAWL 150 MM X 6MM SQUARE POINTED
RAWL PUNCH HOLDER AND BITS NO. 8
10
Rawal tool holder or Bit No. 8
14
or 16
VICE HAND 50 MM JAW
9963810
GEM/2026/B/8098440
Two Packet Bid
Spanner D.E. set of 12 pieces 6mm to 32mm
Surendranagar, Gujarat
Total value wise evaluation
BOQ
6 documents required · 6 mandatory
1 yrs
₹1 L
₹6 L
50%
Exempted
Yes
30 Sept 2026
30 Sept 2026
23 Oct 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | DIVIDERS 200MM | 200MM | 21 | Nos | SAYLA_CON1 | 15 |
| 2 | SCRIBER 150 MM DOUBLE ENDED | 150 MM DOUBLE ENDED | 21 | Nos | SAYLA_CON1 | 15 |
| 3 | TONG FLAT.350 MM LONG | 350 MM LONG | 17 | Nos | SAYLA_CON1 | 15 |
| 4 | TIP CLEANER FOR GAS WELDING TORCH RANGE 0.4 mm to 1.6 mm | RANGE 0.4 mm to 1.6 mm | 21 | Nos | SAYLA_CON1 | 15 |
| 5 | SPINDLE KEY O2,CO2,C2H2,ARLenth 15cm | Lenth 15cm | 8 | Nos | SAYLA_CON1 | 15 |
| 6 | UNIVERSAL WELD MEASURING GAUGE | UNIVERSAL WELD MEASURING GAUGE | 2 | Nos | SAYLA_CON1 | 15 |
| 7 | INVERTER BASED WELDING MACHINE WITH ALL ACCESSORIES 300A , OCV 60 100 V, 60 PER. DUTY CYCLE | 300A , OCV 60 100 V, 60 PER. DUTY CYCLE | 1 | Nos | SAYLA_CON1 | 15 |
| 8 | WELD MEASURING GUAGE FILLETRANGE 3.2 mm to 25.4 mm | RANGE 3.2 mm to 25.4 mm | 8 | Nos | SAYLA_CON1 | 15 |
| 9 | PUG CUTTING MACHINE CAPABLE OF CUTTING STRAIGHT or CIRCULAR WITH ALL ACCESSORIE | PUG CUTTING MACHINE CAPABLE OF CUTTING STRAIGHT & CIRCULAR WITH ALL ACCESSORIE | 1 | Nos | SAYLA_CON1 | 15 |
| 10 | HAND SHEARING MACHINE CAPACITY TO CUT 6MM SHEETS AND FLATS | CAPACITY TO CUT 6MM SHEETS AND FLATS | 1 | Nos | SAYLA_CON1 | 15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_9963810.pdf
GEM_BID • 0.52 MB
specification_doc_boq_3__mech_pdf_2026-09-29-16-13-45_ca941da0755062c0e8ed77829b8308ba.pdf
BOQ • 0.50 MB
boq_item_sample_file_mech_2026-09-29-16-13-45_a607f0001c99aab3a0d77e1d70d29b05.csv
BOQ • 0.01 MB
ITISAYLA_0f78de21-b85d-411e-939a1790682594294_SAYLA_BUYER.docx
GEM_OTHER • 0.16 MB
gtc.pdf
GEM_OTHER • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .