CONSTRUCTION OF MULTI-PURPOSE INDOOR SPORTS FACILITY

Amount

Total Amount of BOQ 2 Please enter GST in % in N column on total Amount

Total Amount of BOQ 3 Please enter GST in % in N column on total Amount

Bidder Name

Amount

SHARDA INFRA ENGINEERS PVT LTD (GSTN-07AAPCS8168P1Z7) BID ID -929561

PAINT CORPORATION (GSTN-24AHXPS1652A1ZA) BID ID -930632

Natavarlal M Patel (GSTN-24AAJFN2346P2ZV) BID ID -931293

Description of Work / Item(s)

Amount

FIRE AND ELECTRICAL WORKS Supply, installation, testing and commissioning of Microprocessor based Intelligent addressable main fire alarm control panel (FACP) central processing unit with the following loop modules and capable of supporting not less than 240 devices(including detectors) and minimum 120 detectors per loop and loop length upto 2 km, network communication card, min. 320 characters graphics/LCD display with touch screen or other keypad and min. 4000 events history logs in the non volatile memory(EPROM), power supply unit 48 hrs. back up with 24volt sealed maintainence free battery with automatic charger. the panel shall have facility to connect printer to print out log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories. the panel shall be compatable for IBMS system with open protocol BACNet/Modbus over IP complete as per specifications.

2 Loop Panel

Supply, installation, testing and commissioning of Repeater Panel with 320 character/Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supply, installation, testing and commissioning of intelligent Analog Addressable photothermal detector complete with mounting base complete as required.

Supply, installation, testing and commissioning of fault isolator complete with mounting base complete as required.

Supply, installation, testing and commissioning of addressable fire control module complete as required.

Supply, installation, testing and commissioning of addressable phone control module complete as required.

Supply, installation, testing and commissioning of Addressable Manual call point complete as required.

Supply, installation, testing and commissioning of Fire fighter telephone handset complete as required.

Supply, installation, testing and commissioning of Intelligent Addressable programmable sounder complete as required.

Supply and laying 2x15 sq.mm Fire survival armoured cable 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable ethylene proplyene rubber insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Providing and fixing PVC insulated copper conductor ISI marked armoured cable (IS:1554) 4 x 1.5 sq mm complete with neccessary saddling and clamping complete - as actual quantity measured. (From FACP Panel to Repeter Panel at Security - Legnth assumed)

Fire Fighting:- Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade comolete as required :

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISi marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Single headed Gun Metal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISi marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as reauired :

Single headed Gun Metal

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the followinq as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line {Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes comolete as reauired.

Supply and installation of CO2 – 4.5 Kg cylinder along with stand confirming to IS 15683 complete in all respects.

Liasioning and will take necessary Statuary Approvals, NoCs, Advisory, Clearance etc. from all concern Local Authorities / Departments, if any, required before start of the work, during the work, after execution of work & before handing over.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for Twin control light point light with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 2 way modular switch, modular plate,, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supply and fixing of two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Wiring for Submain/Circuit wiring alongwith earth wire with the following sizes of FRLS PVC insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit as required.

2X1.5 sq. mm + 1X1.5 sq. mm Earth wire.

2X2.5 sq. mm + 1X2.5 sq. mm Earth wire.

2X4.0 sq. mm + 1X4.0 sq. mm Earth wire.

4X4.0 sq. mm + 2X4.0 sq. mm Earth wire.

Supplying,installation,Testing and commissioning of Main and sub panels as per drawing and specifications. Panel should be dust and vermin proof (IP-52). Panel shall be fabricated from 14 /16 SWG CRCA sheet metal duly painted with seven tank process and poweder coated of approved paints. Panel consisting of following. Note : All MCCBs shall be Ics = 100 % Icu and to be adjustables. All MCB shall be 10kA - C-Curve, All ACBs shall be Icu=Ics=Icw for 1 Sec. MAIN PANEL (At 7th Floor Elect Rm) Incomer : 400 A FP MCCB, 35 kA, T/M - 1 No. incomer shall be inbuilt protection of S/C, O/C and E/F protection with SPD - 400 A, 440V, FP, Copper. Busbars(connections shall be done with bimetallic lugs) - 40 x 6 mm Copper Earth Busbars - CTs with MFM - indicating lamps Outgoing Feeders : - 250 A TPN MCCB, 25 kA, T/M (2 nos.) - 80 A FP MCCB, 25 kA, T/M (2 nos.) - 40 A FP MCB, 10 kA (10 nos.) - 6A - 32 A FP MCB, 10 kA (2 nos.)

Supplying and fixing following way, Horizontal type three pole and neutral,prewired, sheet steel, MCB distribution board, 415 volts,on surface /recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).

4 way (4 + 12), Double door, horizontal type

6 way (4 + 18), Double door, horizontal type

8 way (4 + 24), Double door, horizontal type

Supplying and fixing following rating, double pole, (single phase and neutral) 240 volts, residual current circuit breaker (RCCB), having a sensivity current 30/100/300 miliampere(as per load) in the existing MCB DB complete with connections,testing and commissioning etc. as required :

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps. rating, 240/415 volts `C' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Supplying and Earthing with GI earth pipe, 4.5mtr long, 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc, (with charcoal and salt ) as required.

Supply and laying of following Hot deep G.I. Earth strip or copper earth strip for earthing with all required jointing / cutting / welding complete with all hardwares and all welded joints to be painted with black bitumin paints and to be wraped with jute complete to the satisfaction of E.I.C

40 x 6 mm GI earthing strip

Supply, laying, installing and commissioning of following size PVC insulated wire including end terminations with bimetallic type lugs as per the requiements with each piece of cable etc. complete for earthing duly clamped / laid in existing conduit / trunking cable tray etc complete

4.0 sq.mm in green colour

Supply, laying with excavation and backfilling of cable trench/tray as specified in General specification of Erection, Installation, Testing & commisioning of Electrical Equipments/ Cable route layout , termination , erection and testing of 1.1 KV Power FRLS XLPE Cables . Outdoor cable will be laid in buried cable trench and via HDPE duct laying and in Indoor application it will be in Cable trench by provision of Cable tray and supports inside the trench as per cable and Accessories.

3.5 C x 185 Sq.mm A2XFY Cable

4 C x 16 Sq.mm Cu 2XFY Cable

4 C x 4 Sq.mm Cu 2XWY Cable

4 C x 2.5 Sq.mm Cu 2XWY Cable

3 C x 2.5 Sq.mm Cu 2XWY Cable

3 C x 1.5 Sq.mm Cu 2XWY Cable

Supplying and making end terminations with brass compression glands and aluminium/copper lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 185 sq.mm. Aluminium Cable

4 C x 16 Sq.mm Cu 2XFY Cable

4 C x 4 Sq.mm Cu 2XWY Cable

4 C x 2.5 Sq.mm Cu 2XWY Cable

3 C x 1.5 Sq.mm Cu 2XWY Cable

Supply, erection, fabrication and jointing of following size GI hot dip galvanized cable tray with cover and all accessories such as bends / cross / reducers / Tee, with covers or without covers and clamps, GI hardwares, other accessories etc. as per drawing and specification complete in line and level etc. complete to the satisfaction of EIC (Galvanisation thickness shall not been less than 75 micron)

100 x 25 x 2.0 mm Perforated cable tray with 110 x 10 x 2.0 mm plain GI hotdeep cover

150 x 50 x 2.0 mm Ladder type cable tray

Supply, erection, fabrication, cutting, welding and installation of structural steel using m.s. angles, flats, channels etc. as per drawing and specification with one coat of red-oxide paints and two coats of approved enamel paints with all hardwares such as anchor fastners, GI nutbolts and washers etc. complete to the satisfaction of EIC.

Supply and installation of 100 mm x 100 mm x 60 mm junction box as per drawing. Junction box duly fabricated from 16 SWG hot deep G.I. sheet with top cover of 16 SWG hot deep GI cover plate, neo-prene gasket inside, all required hardwares, necessary knock-out all sides suitable for 4 x 4 / 3 x 2.5 sq.mm Cu. YWY / 2XWY cables glanding complete with 15 A terminals inside the junction complete to be installed on wall / RCC / steel structure with necessary drilling / welding etc. complete to the satisfaction of EIC

Supply, Installation, testing and commissioning of following Light fixtures etc. Including supply and installation of flexible cords, ball sockets, down rods, hardwares etc. Excluding supply and fabrication of structural steel supports for industrial fixtures in plant bldgs. but inclusive of erection of fixtures with all necessary structural steel supports and to be welded or nut-bolting with all necessary fabrication and drilling etc.complete. (Structural steel supports shall measure and paid extra as per the item in this tender).

155 W, 20000 Lumens LED Flood light fixture complete with all assembly lamp, drivers etc.

12 W Recessed false ceiling mounted 1200 Lumens LED downlight fixture with necessay assembly lamp, drivers, diffuser etc complete

6 W Recessed false ceiling mounted 600 Lumens LED downlight fixture with necessay assembly lamp, drivers, diffuser etc complete

20W, 2200 Lumens, 1200 mm long LED batten light fixture surface mounted with in-built driver etc complete

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply and laying 2x15 sq.mm Fire survival armoured cable 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable ethylene proplyene rubber insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Providing and fixing PVC insulated copper conductor ISI marked armoured cable (IS:1554) 4 x 1.5 sq mm complete with neccessary saddling and clamping complete - as actual quantity measured. (From FACP Panel to Repeter Panel at Security - Legnth assumed)

Supply and Laying of 2 core x 1.5 sqmm pvc insulated copper conductor for communication and wired remote controller in PVC Conduit for VRF units

Supply and Laying of 3 core x 2.5 sqmm pvc insulated copper conductor cable for indoor units in PVC Conduit

Supply and Laying of 3 core x 4.0 sqmm pvc insulated copper conductor cable for indoor units in PVC Conduit

4core x 10sqmm pvc insulated copper conductor cable

4core x 16sqmm pvc insulated copper conductor cable

Supply and fixing of fololowing rating 30mA RCBO with waether proof box

LIASIONING :

scope of work a. Prepare and submission of application at Electrical Inspectorate. b. Approval of Drawings. c. Arrange for Ele. Inspector site inspection. d. Receipt of NOC and submit at MGVCL for further action. Liasoning work with MGVCL as per scope of work a. Registration of application. b. Arranging for technical feasibility site survey from M/s MGVCL c. Obtaining detailed estimate from M/s MGVCL. d. Arranging for payment of estimation and Execution of agreement with M/s MGVCL. e. Release of power on proposed place from M/s MGVCL EI complete in all respects.

HVAC WORKS

Supply, Installation, Testing and Commissioning of Top Discharge Variable Refrigerant Flow air-conditioning units with 100% Inverter type compressor, Heat-pump type, air cooled condenser with low noise fan having interconnected control wiring and refrigerant piping housed in compact housing duly powder coated of following capacities All compressors shall be inverter type. The condensing units shall be suitable to work on cooling as well as heating mode. The condensing units shall be suitable for operation on 415 ±10% volts, 50Hz, 3 phase AC power supply and complete with auto check function for connection error, auto address setting, etc. The outdoor units shall be low noise type. outdoor units shall be of following capacities: (min. BEE3)

Supply of VRV indoor air-conditioning unit of below mentioned capacity suitable to operate from 230+10% volt, 50 Hz, 1/3 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with thermetically sealed scroll/rotary type compressor condenser coil, propeller fans controls, control panel, drain pan. The charging of ref/oil if required shall be included in the cost. The Unit should be 3 Star rated (on the date of procurements the minimum EER value of the units should be as per BEE Standard) with suitable electrical starter, etc. of the following capacities.

Ductable Type (8.0 TR)

Supply, Installation, Testing and Commissioning of Wall Mounted Split type Indoor Unit along with necessary arrangement

Supply and Fixing of Drain Pump for Ductable and Hiwall Units

Supply of Wireless remote

Supply of Wired Remote

Supply and fixing of Y joints

Supply and fixing of ODU Joints

41.3 mm dia pipe insulated with 19 mm thick insulation

34.9 mm dia pipe insulated with 19 mm thick insulation

28.5 mm dia pipe insulated with 19 mm thick insulation

22.2 mm dia pipe insulated with 19 mm thick insulation

19.1 mm dia pipe insulated with 19 mm thick insulation

15.9 mm dia pipe insulated with 13 mm thick insulation

12.7 mm dia pipe insulated with 13 mm thick insulation

9.5 mm dia pipe insulated with 13 mm thick insulation

6.4 mm dia pipe insulated with 13 mm thick insulation

Supply and installation of 150 (w)x 100 (d) x1.6 (thickness) Ms perforated Cable Tray with cover for exposed Refrigerant copper piping.

Refrigerant R-410A to top up the system

Providing and fixing in position the following PVC Drain with all necessary fittings and joints. Quoted price shall be inclusive of 6 mm closed cell nitrile rubber pipe insulation.

40 mm dia drain pipe.

32 mm dia drain pipe.

25 mm dia drain pipes.

Wall Chiselling/ Opening for Drain & CU Pipe

Supplying, installing, testing and balancing of Galvanised Steel Sheet (Completely Factory Fabricated with TDF/Slip ON Flanges) 120 GSM seamed ducting of following thickness including necessary supports (also of galvanised steel-Make:HILTI), hangers, nuts, bolts, gaskets, splitter dampers, turning vanes, canvas connections, connection pieces of rectangular to Spiral etc. complete as per technical specifications. All archs shall have baffles inside.The bidder shall quote his rates considering elbows reducers, tees, baffles etc.The thickness of ducting shall be according to IS 655- 1963. Spacing between duct supports should not exceed 1.5m in both cases i.e GI rods or with GI "C" channels . In case of Gripple Wire Rope Hanger support for duct sizes above 1800mm, MS angles duly painted with black enamel paint should be used along with neoprene pad in between the duct & MS angle. All duct support to be provided with check nuts (lock nuts).

Supplying, installing, testing and balancing of Galvanised Steel Sheet site fabricated 120 GSM seamed ducting of following thickness including necessary supports (also of galvanised steel-Make:HILTI), hangers, nuts, bolts, gaskets, splitter dampers, turning vanes, canvas connections, connection pieces of rectangular to Spiral etc. complete as per technical specifications. All archs shall have baffles inside.The bidder shall quote his rates considering elbows reducers, tees, baffles etc.The thickness of ducting shall be according to IS 655- 1963. Spacing between duct supports should not exceed 1.5m in both cases i.e GI rods or with GI "C" channels . In case of Gripple Wire Rope Hanger support for duct sizes above 1800mm, MS angles duly painted with black enamel paint should be used along with neoprene pad in between the duct & MS angle. All duct support to be provided with check nuts (lock nuts).

Supplying, installing, testing and commisioning of GI volume control Duct damper complete with neoprene rubber gaskets, nuts, bolts, screws, linkage flandes etc. as poer specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air grill with volume control damper as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grill without damper complete as required.

Supplying & fixing of powder coated extruded aluminium Supply Air Diffuser with aluminium volume control dampers with anti smudge ring & removable core

Supplying & fixing of powder coated extruded aluminium Return Air Diffuser without aluminium volume control dampers with anti smudge ring & removable core

Supplying, installing, testing of thermal insulated Flexible Duct of following size flexible ducting of following sizes duly suported at regular interval as per site requirements etc. complete as required as per specifications.

200 mm dia

300 mm dia

Supply and Installation of Fabric Flexible Canvas Connection to be installed between all the indoor Units and the ducting to provide flexibility of movement

Supplying & fixing of powder coated extruded aluminium 300mm dia Supply Air Jet Nozzle

Supply and fixing of Collar damper for Jet Nozzle

Supply and fixing of Rectangular Collar damper

Supply, Fixing & Testing of open cell nitrile rubber acoustic insulation, with density 140-180 kg/cum. and having anti fungal & anti bacterial properties as per DIN EN ISO 846, MATHOD A&C. The insulation should have been tested for air erosion at air velocity of 10000 fpm in accordance to ASTM Standard C 1071-05. 20 mm thick for Ducts.

15 mm thick lining

Supplying, and fixing following thickness duly laminated of aluminium foil mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. above values should have pressure rating of 25 bar minimum

19 mm thick

25 mm thick

Supply and Fixing of 150mm dia Propellor Fan for Toilet and Kitchen Ventilation

Supply, Installation and Testing of extruded aluminium powder coated louver with GI wire mesh to be installed outside for discharge of exhaust air from exhaust fans as per the specifications and shop drawings.

PAINT CORPORATION (BID ID -930632)

SHARDA INFRA ENGINEERS PVT LTD (BID ID -929561)

Natavarlal M Patel (BID ID -931293)

PAINT CORPORATION (BID ID -930632)

PAINT CORPORATION (BID ID -930632)

SHARDA INFRA ENGINEERS PVT LTD (BID ID -929561)

PAINT CORPORATION (BID ID -930632)

SHARDA INFRA ENGINEERS PVT LTD (BID ID -929561)

Natavarlal M Patel (BID ID -931293)

PAINT CORPORATION (BID ID -930632)

PAINT CORPORATION (BID ID -930632)

SHARDA INFRA ENGINEERS PVT LTD (BID ID -929561)