WBPWD/AE/KSD/PWD/eNIT-01/26-27 (2nd Call)/(SL-2)

Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc.complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (iii) 35mm thick shutters with 19mm thick panel of size 30to 45 Cm AE Room Section-II Rom

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm. AE Room Office Room Window Door Sec - II

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (c) 40mm X 6mm, 125mm Length AE Room (Door) Window Sec-II(Door)

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated (v) 150mm long x 12mm dia. bolt. For nylone netted window AE Room (Door) Window Sec-II(Door)

Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed (ii) 175mm plate x 12mm dia rod x 60mm hexagonal / fluted..

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6levers including fitting & fixing complete.

ii) Godrej Hydraulic door closer fitted and fixed complete. a) Heavy type

Iron door ring of approved quality fitted and fixed with nut and washer i)50 mm dia

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. In Ground Floor AE office Room