M/o Road (M/o RCC Central Verge at 45.00M wide road from Police Commissionerate office to ATS Hemlet in Janpath Marg) Noida

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone calbe, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in Charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.50 mt.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). All works upto plinth level

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Earth work in embankment in ordinary soil embankment to be in 20 cm layer breaking clods. Watering, rolling each layer with 1/2 tonne roller or wooden roller or steel rammer and rolling every third or top most layer with power roller or minimum 8 tonne including 1.5m lift and all lead including cartage of earth by Mechinical Transportation and all T & P labour etc. required for proper completion or work (earth shall be arranged by the contractor at his own cost from out side of Noida.

Delieator supply & Fixing M.S. Delieator made of Mild Steel with Pure polyster powder coating with minimum thick of powder coating of not less than 40 micron for protection against corrsion the surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concelaled with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900mm above the ground with about 200 to 300mm base which can be anchored onto the ground. Mild steel guide poles shall conform to Type XI sheeting specifications as per IRC 67 and ASTM D4956 which would ensure to obtain clear visibility of the road allignment during night time. The Retro reflective sheeting shall be tested for A. Certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, Shrinkage, flexibility, linear removal, adhesion, Impact resistance specular gloss and lungus resistance, 3 years outdoor weathering and its having passed tjese tests sja;; ne pntaomed frp, Omtermatopma;/Government Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from International condition. it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification(D4956-09)on artifical accelerated weathering requirement from a reputed laboratory in India can be accepted provisionally. In such a situation the employer/Client if so desire, could seek for a performance auarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67.2012 7 proof of the same report shall be uploaded which auoting tender the rate shall include all materials, labour, T&P transportation, Instalation and incidentals all complete as per direction of the Engineer-in-charge.

Providing wall putty on new Surface with Approved Quality Material of Berger/ J.K / Birla or Similar Make 2 Coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix :1:4 (1 cement : 4 coarse sand)

Neat cement punning

Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement.

Please Enable Macros to View BoQ information

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 31/GM(C)/SM(WC-8)/ET/2025-26

Tender :

Name of Tenderer:

TOTAL BOQ COST OF PROJECT (In Rs.)

Minimum Value

SOLVENCY (Issued within a period of minimum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

For Similarity of Works:- dsoy lM+d fuekZ.k@ Hkou fuekZ.k@ ukyh@ pkjnhokjh@ QqVikFk@ bUVjykWfdax VkbZy@lM+d lqnz<[email protected]ªy otZ@ lh0lh0 jksM@ ckWDl dYoVZ ds dk;Z vuqHko ekU; gksxsaA lhoj ,oa tykiwfrZ ds vuqHko izek.k i= ekU; ugha gksxsaA

RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years)

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive fiancial years.

Required Technical Staff

Required Machinary

Character Certificate of Indivisual /partners /directors issued from District Megistrate

Affidavit of not blacklisted

Affidavit for no Blood relation in Noida Authority

Address Proof/Id. Proof of indivisual /partners/directors.

Registration Certificate of GST

Filled in form Capability Statement.

Certified Copies of relevant pages of following documents:

RESULT