Construction of New Boys Hostel Building for (V.Ja.) at Khambhat. District-Anand. (Supplying and Arranging and Fixing Furniture)

(upto INR 50 Cr. )/ Item Rate

Contract (above INR 50 Cr.)

*Input index/price for each component on 28 days preceding the date of opening of technical

bid shall be noted.

This is certify

to that the contract document

prepared for the work of Construction of New Boys Hostel Building for (V.Ja.)

at Khambhat Dist.Anand (Supplying and arranging and fixing furniture) is based

the Standard Bidding Document Procurement of Civil Works published by

department letter No. RBD/0346/10/2023 dated 12/10/2023.

No further modification and alteration in this standard format has been made

Deputy xecutive Engineer Executiv Engineer

R&B Sub Division R&B Division

Khambhat Anand.

SPECIAL CONDITION FOR TENDER

The Following criteria should be Fulfilled by the bidder to qualify for tender.

Eligibility Condition

1.1 Certificate by International Organization for standardization in appropriate Category scanned

copy of valid certificate should be attached.

1.2 The Registration certificate of ISO: 9001:2008 Scanned copy of valid certificate should be

attached. (If available)

2. Bidders are required to attach Registration certificate of CST / GST.

3. Bidders are required to attach the

copy of similar nature of work experience. (Attach copy of 3A)

(40% of Work Estimated cost put to Tender)

4. Valid bank solvency certificate of 20% of Estimated cost put to Tender Valid for Calendar

5. Bidder should have to deposit additional Bank Guarantee in additional to

Security Deposit after approval of tender. Bidder can quote whatsoever amount above or below, but

ifBidder quote below to the estimated amount, Bidder should have to deposit additional Bank

Guarantee for the amount same as to amount tender below the estimated amount.

(Example: If estimated cost is and bidder had quoted 20% below the estimated cost,

bidder should be having to deposit Rs.17,02,100.00 in from of additional bank guarantee in favor of

Executive Engineer Road & Building Division, Anand for the contractual period.

6. Bidder should be manufacturer of modular Furniture. Bid by entity entering into joint venture with

any manufacturer shall not be considered.

7.Agency shall have minimum turnover of Rs.50.00 lakhs per annum. Certificate by Chartered

Accountant shall be furnished invariably.

8. Allwork shall be carried out as per detail working drawings and as directed by Architect.

Contractor must approve sample piece of each items from authority and architect before starting

mass production.

9.Registration Certificate of MSME or Udyog Aadhaar number indication prime activity of

Manufacturing must be furnished.

Deputy ecutive Engineer Executi Engineer

R& B Sub Division, R & B Division,

KHAMBHAT. ANAND.

DETAILED ADDRESS & CONTACT INFORMATION OF AGENCY

1 Name of Agency

2 Corresponding Address

3 Details of Contact Person

Name of Work :- Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture )

LIST OF APPROVED MAKES

1. Plywood (B. W. R.) Centuty Ply, Green Ply, Samrat Ply, Specewood or equivalent

2. Wood Ghana Teak wood, Burma wood or equivalent

3. Laminate Century Ply, Green Ply, Olive, Specewood or equivalent

4. M. S. CRC Flat Jindal, Tata or

5. M. S. CRC Round, Square pipe Jindal, Tata Precision

6. Aluminium Extrusion JM, Mann, Hindalco or equivalent

7. PIJ Foam Kurlon, Sleepwall, Feather foam or equivalent

8. Fabric Tapestry .

Sarom, Neptune, Decor or equivalent

9. Mattress Sleepzone, King koli, PEPE, Specewood, Coridoam or equivalent

10. S.S. Hinges Hettich, Hafele, Specewood or equivalent

II. S.S. Handle Hettich, Hafele, Specewood or equivalent

12. S.S. Stud Hettich, Hafele, Specewood or equivalent

13. S.S. Auto Hinges Hettich, Hafele, Specewood or equivalent

14. Locks Hettich, Godrej or equivalent

15. Chairs HOF, Godrej, Classic or equivalent

16. Anchor Fasteners Hettich, Hafele, Ebco, Specewood or equivalent

17. Drawer Channel Hettich, Hafele, Mepal, Specewood or equivalent

18. Drawer Lock Godrej, Kombo, Specewood, Hettich or equivalent

19. Sliding Rail / Channel Hettich, Mepal, Ebco or equivalent

20. Glass Saint Gobain, Modi Guard, Asahi or equivalent

Fevicol, Henkel or equivalent

22. Miscellaneous Hardware Hettich, Hafele, Ebco, Kombo, Specewood or equivalent

Deputy utive Engineer Executive Engineer

(R & B) Sub-Division, (R & B) Division,

KHAMBHAT. ANAND.

Approved Makes Page

Name of Work :- Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture )

INDEX OF SPECIFICA TION

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

1. Providing and Arranging EXECUTIVE TABLE in overall size As per separate sheet attached herewith Separate

: (L) 1830 X (W) 1200 (H) 750 mm. TABLE TOP 25mm thick sheet

ISI Marked Prelaminated Ply board IS-14587-1998 with attached

upto date amendment, LIPPING Teak wood half round

50mm wide, supported from inside by Jungle wood

mm x 25 mm. DRAWER BOX CR sheet 0.80mm thk

Confirming to IS-513 CUBOARD size 600 (D) x400 (W) x

450 (H) mm. DRAWER SIZE 500 (L) x 100 (D) mm

Minimum. Drawer 3 Nos. and one folding shelf in cup

Board. FRAME & STRUCTRUE ERW Square pipe

25x25x1.25mm in size 1680 (L) x 950 (W) x 732 (H) mm.

with Center Support as indicated. To be welded in center

below the top as shown in figure. CUPBOARD BOX TYPE

made of 0.80mm CRCA Sheet Confirming to IS-513.

SHUTTER. FOOT REST ERW square pipe 25x25x125 mm

in full length and

gap between two pipes Including all

materials and labour etc. complete as per drawing and

instruction of engineer-in-charge. EXECUTIVE TABLE Size

2. Providing and Arranging EXECUTIVE CHAIR Overall size As per separate sheet attached herewith Separate

Width 650mm Without castors, Depth 650mm, Height sheet

1050 Adjustability of seat height 440 to

to 1140mm, attached

530mm. Seat size 500x500mm approx. Back size

500x610 (H) approx. Material : Seat and back should be

made up of 12mm thick hot pressed plywood upholstered

with fabric and molded Polyurethane foam (60mm thick.

With density 50-55), together with molded ABS seat and

back covers. The back foam is designed with contoured

lumbar support for extra comfort. The armrest should be

one piece and made of black integral

and reinforced with MS insert and scratch and weather

resistant. Castors : The twin wheel

castors should be

injected molded in black

Nylon. Pedestal Assy. : The

pedestal should be injection mounded in black 30% glass

filledNylon with gas lift mechanism. Upholstery : The

seats and backs are to be covered with superior quality

fabric. Finish : All steel components are to be painted

after proper anti corrosion pretreatment of surface

Including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge. EXECUTIVE

CHAIR Size : -W 650 x D 650 x H 1050 / 1140 mm

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

3. Providing and Arranging EXECUTIVE TABLE Overall Size . As per separate sheet attached herewith Separate

(L) 1525 X (W) 900 (H) 750 mm.TABLE TOP :

25mrn THK. sheet

ISI Marked Pre Laminated Ply Board IS-14587-1998. With attached

up to date amendment. LIPPING : Teak wood half round

50mm wide, supported from inside by Jungle wood

mm x 25 mm. PANNEL : Two folded edge CR sheet

0.80mm thick Confirming to IS-513. DRAWER BOX : CR

sheet 0.80mm thick Confirming to IS-513. CUBOARD size

600(D) x 350(W) x 450mm(l-l). DRAWER SIZE

Minimum. (3 Nos) FRAME &

STRUCTRUE ERW Square pipe 25x25xI.25mm in

sizei375(L) x 750(W) x as per Diagram

CUPBOARD SHUTTER : BOX TYPE made of 0.80mm CR

sheet Confirming to IS-513. FOOT REST : ERW

pipe 25x25xI.25mm in full length and gap between two

pipes approx. 85.mm Including all materials and labours

etc. complete as per drawing and instruction of Engineer-

in charge. EXECUTIVE TABLE Overall Size : (L) 1525 X (W)

4. Providing and Arranging EXECUTIVE TABLE Overall Size As per separate sheet attached herewith Separate

(L) 1830 X (W) 900 (H) 750 mm.TABLE TOP 25mm THK. .

ISI Marked Pre Laminated Ply Board IS-14587-1998. With

up to date amendment. LIPPING : Teak wood half round

50mm wide, supported from inside by Jungle wood

mm x 25 mm. PANNEL : Two folded edge CR sheet

0.80mm thick Confirming to IS-513. DRAWER BOX : CR

sheet 0.80mm thick Confirming to IS-513. CUBOARD size

600(D) x 350(W) x 450mm(l-l). DRAWER SIZE

Minimum. (3 Nos) &FRAME

STRUCTRUE ERW Square pipe

size1375(L) x 750(W) x 732(H)mm. as per Diagram

CUPBOARD SHUTTER : BOX TYPE made of 0.80mm CR

sheet Confirming to IS-513. FOOT REST : ERW square

pipe 25x25xI.25mm in full length and gap between two

pipes approx. 85.mm Including all materials and labours

etc. complete as

per drawing and instruction of Engineer-

EXECUTIVE TABLE Overall Size : (L) 1830 X (W)

5. Providing and Arranging STUDY TABLE Size : As per separate sheet attached herewith Separate

mm TOP : Made of 18mrn THK. ISI Marked Pre Laminated sheet

Ply Board IS-14587-1998. in approved shade with

round lipping with thinner polish or touch wood polish,

shall be fitted angle frame Of 32 x 32 x 3/2.5 mm contains

one extra lengthwise support of same angle. STRUCTURE :

Made of M.S. angel 32 x 32 x 3/2.5 duly welded.

Confirming to IS. PAINTS : Two coats of air drying

synthetic enamel paints of ISI mark Confirming to IS-2392

made over two coat of metal primer. FINISHED SIZE

Finished size of Structure and top shall be as shown in

figure. Including all materials and labours etc. complete as

per drawing and instruction of Engineer-in charge. STUDY

TABLE Size : 900 x 425 x 760 mm

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

6. Providing and Arranging OFFICE CHAIR (MID BACK As per separate sheet attached herewith Separate

CHAIR) made out of aluminium die cast in 5 sheet

pronged base, polyester mesh in back with attached

lumbar pad which can be adjustable by the

user, high density injection molded PU with

leather upholstery in seat pan with center tilt

mechanism with PU padded height adjustable arm

rest. The height adjustment of the chair should be

done with gas lift with 100 mm travel for quick and

comfortable height adjustment. It should be

maintenance free and should be tested for over

50,000 cycles using stringent quality assurance system.

The gas used in the cylinder should be non- toxic,

non-flammable. The tilt mechanism should made up

of cold-rolled carbon steel sheets as per technical

specifications mentioned above. The mechanism should

be with 4 position locking mechanism. Polyurethane

armrests confirming to IS standard and fabric as per

the technical specifications mentioned above should

be provided in the chairs etc. complete as directed

by the Architect and approved by the Engineer in

Charge. OFFICE CHAIR (MID BACK CHAIR)

7. Providing and Arranging OFFICE CHAIR (OVER HANGING As per separate sheet attached herewith Separate

ARM) Overall Size: (H) 900/455 x (W) 500 x (D) 560mm. sheet

Low back chair made out of nylon in 5-pronged base, high attached

density injection moulded PU with fabric upholstery in

seat pan and ergonomically contoured backrest to

comfort the user with synchro tilt mechanism with fixed

type PIJ padded arm rest. The height adjustment of

the chair should be done with gas lift with 100 mm travel

for quick and comfortable height adjustment. It should

be maintenance free and should be tested for over

50,000 cycles using stringent quality assurance system.

The mechanism should be with 2 position locking

mechanism. Polyurethane armrests confirming to IS

standard and fabric as per the technical

specifications mentioned above should be provided in

the chairs etc. complete as per drawing and instruction

of Engineer-in charge. OFFICE CHAIR Size: (H) 900/455 x

8. Providing and Arranging STUDY CHAIR Overall Size: (W) As per separate sheet attached herewith Separate

500 x (D) 550 x (H) 820 mm with P type handle, Non sheet

revolving oval shape with metal steel powder quoted attached

visitor chair Including all materials and labours etc.

complete as per drawing and instruction of Engineer-in

charge, VISITOR CHAIR Size: (W) 500 x (D) 550 x (H)

9. Providing and Supplying PLASTIC CHAIRS of make As per separate sheet attached herewith Separate

Nillcamal, CELLO, SUPREME etc. Completed as directed by sheet

the Architect and approved by the Engineer in Charge attached

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

10. Providing & Supplying WOODEN FIVE SEATED SOFA As per separate sheet attached herewith Separate

made using Indian Teak wood in framing and support sheet

of 19mm thick WP plywood, box of the sofa attached

made with 100mm Thick High Density 'U' foam in seat

and 50mm Thick High Density 'U' foam in back rest

portion with imported POI-Y TEEL recron covering on

back portion with textured TAPESTRY black Leather

covering and S.S. legs with necessary fixtures &

fastening etc., competed as per sample approved &

as directed by the Engineer in Charge. WOODEN FIVE

11. Providing & Supplying WOODEN THREE SEATED SOFA As per separate sheet attached herewith Separate

made using Indian Teak wood in framing and support sheet

of 19mm thick WP plywood, box of the sofa attached

made with100mm Thick High Density 'U' foam in seat

and 50mm Thick High Density 'U' foam in back rest

portion with imported POLYTEEL recron covering on

back portion with textured black Leather

covering and S.S. legs with necessary fixtures &

fastening etc., competed as per sample approved &

as directed by the Engineer in Charge. WOODEN

THREE SEATED SOFA

12. Providing and Arranging CENTER TABLE made from As per separate sheet attached herewith Separate

37 mm x 37 mm size Indian teakwood leg and top frame sheet

made from 37mmx 75mm Indian teakwood having 18mm attached

thick Ply and 4mm thick Veneer with melamine polish and

0.8mm thick balancing laminate at bottom for shelf made

with surrounding Indian teakwood frame of size 37mm x

12mm. The top having 12mm thick frosted glass with

edge finish to be placed

properly in groove made. Surface

to be finished withmelamine polish including all materials

and labours etc. complete as per drawing and instruction

of engineer-in-charge. CENTER TABLE : size 900mm x

13. Providing and Arranging Three Seater Gang Seater having As per separate sheet attached herewith Separate

seat and back made from CRCA capcular Tubular frame sheet

welded with perforated Die moulded CRCA sheet. base attached

frame made from round Tubular welded with horizontal

beam Two side armrest welded with frame including

finishing metal parts with epoxy polyster powde coating

of 50 micron thickness Including all materials and labour

etc.CompIete as per drawing and instruction of engineer-

in charge And of

premium quality as approved by EIC.

Seater S.S. Gang Seater

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

14. Providing and Arranging STAINLESS STEEL CANTEEN As per separate sheet attached herewith Separate

TABLE for IO person with collapsible stools Size for 10 sheet

persons overall Size: L-3000 x W-900 x H-760 mm attached

manufacturing and supplying quality assured SS 304 Steel

Canteen Table. Finished size of table shall be as shown in

figure. all materials and labours etc. complete -as per

drawing and instruction of engineer-in-charge. CANTEEN

TABLE Size: 1-3000 x W-900 x H-760 mm

15. Providing and Arranging STEEL STOOL overall size: (H) 690 As per separate sheet attached herewith Separate

X (W) 410 X (D) 410 mm FRAME : E.R.W. Square pipe size sheet

25x25x1.25mm four side welded, minimum 50.mm taper attached

is to be provided on legs. SEAT/TOP : 18mm THK. ISI

Marked Pre Laminated Ply Board IS-14587-1998. with

18mm wide half round teak wood lapping with teak

polish. FITTING :- Seat fitted with round head steel screws

8 No. with washer, 2 no in each under. all materials and

labours etc. complete as per drawing and instruction of

engineer-in-charge. STEEL STOOL size: (H) 690 X (W)

16. Providing and placing Indian teakwood Stool Legs & As per separate sheet attached herewith Separate

support should be made from teak wood & top is made sheet

from teak wood 30 mm thick top and remaining porition attached

with good quality polishing stool Size: (L) 45 cm x (B)

cm x 90 cm. All works shall be carried out as per

directed by engineer in charge. WOODEN STOOL Size -

17. Providing and Arranging CUPBOARD (WARDROBE) Size: As per separate sheet attached herewith Separate

900mm x 450mm x 2130mm (H). The CR Sheet used shall sheet

be of prime quality, Confirming to IS-513 and thickness attached

MM. Each shelf be formed such the edges are bend

two times at right angle, first bend 30mm and second

bend 8mm. Door stiffener frame inside to its full height in

top hat section size 100mm width. Lever rod shall be of

Ms 12mm round/square bar or 10mm bright bar. Size of

hinges shall be 75mm length x 1.6mm thk. Brackets shall

be made of 1.6 mm of CR sheet, riveted or bolted on each

side of hinges. Machine made lever plate (patla)with brass

bush of good quality or machine made six lever type

patla. Patla shall be covered by box covered by box over

fitted with round head screws. For locking brass body

Godrej type cabinet lock or cabinet lock 61eaver die cast

zinc alloy body of size(h) 65 x (W) 50mm fitted on four

screws or GRACE" LOCK. Keys in duplicate with key rings

shall provided. Metallic key cover electroplated

nickel/chrome on front side of the door shall be provided.

For door, die cast chrome plated handle fitted with washer

and double nut. Leg height shall be 125 mm x 100 mm.

Including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge.

CUPBOARD (WARDROBE) Size: 900mrn x 450mm x

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

18. Providing & Supplying BOOK SHELF Sliding Door Cub As per separate sheet attached herewith Separate

Board having Size-1830mm Height X 900mm Width X sheet

450mm Depth. The design of door cabinet shall be as attached

above in the figure. Sheet CR prime 0.80 mm thick

Confirming to IS-513 with latest Amendment

Compartment- 4 no. Six leaver locks of high quality in

each shutter operated by

one key, supplied with key

Chrome plated, metallic handles two nos, on each shutter

from outside. Plane glass, 4mm thick in each shutter fitted

in suitable frame from inside.

Shutter sliding on ball

bearing, two nos. in each door with suitable system /

double roller system. One additional plate of 127mm

hightx830mm width shall be provided on lower side.

Number of shelves in each compartment 4 Nos. The -

quoting price should be inclusive of all types of taxes

duties ,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical

specifications and make. As per the direction of the

Architect / Engineer In charge. BOOK SHELF : 900mm x

450mrn x 1830mm (H)

19. Providing & Supplying BOOK RACK having Size-1830mm As per separate sheet attached herewith Separate

Height X 900mm Width X 450mm Depth. Rigid knock sheet

down construction. Back side and door are made from 0.7 attached

mm high yield strength CRCA, rest in 0.8 mm CRCA. I-JDL

capacity is 50 kg max. Finish with epoxy polyester powder

coated thick 50 microns. Screw type leveller with hex

plastic base, metal top. Number of shelves in each

4 Nos. The quoting price

inclusive of all types of taxes & duties packing, forwarding,

loading, unloading, installaion. Supplied strictly as

technical specifications and make. As

per the direction of

the Architect / Engineer In charge. BOOK RACK 900mm

20. Providing & Supplying FILE RACK having Size-1380mm As per separate sheet attached herewith Separate

Height X 700mm Width X 470mm Depth. Complete sheet

cabinet shall be made of 0.8mm CR sheet Confirming to attached

IS-513. Locks : 6 Lever of high quality shall be of

automatic unit type push button. Telescopic/sliding

arrangement shall be provided for drawers. Suitable size

channel shall be provided throughout the depth in

1.60mm thick sheet. One nickel label frame and a

nickel/chrome plated handle shall be provided on each

drawer. Approx 12mm gap between each drawers shall be

provided. Suspension holders shall not be provided with

the cabinet.The quoting price should be inclusive of all

types of taxes & duties packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make. As per the direction of

the Architect / Engineer In charge. FILE RACK : 700mm x

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

21. Providing & Supplying GLASS DOOR CABNET having Size- As per separate sheet attached herewith Separate

1980mm Height X 900mm Width X 480mm Depth. The sheet

design of Glass door cabinet shall be as above in the attached

figure. CR sheet 1.0mm thick Confirming to IS-513. Shelf

nos. forming five compartments. Edge first bending 30mm

and second edge bend 8mm and depth of shelf 400mm.

Plan glass 5mm/4.5mm thick on each side of door with

suitable cushion pads. The glasses shall fit in an additional

frame of top section which is fixed to shutter frame from

inside. Machine made lever plate (Patla ) with brass bush

or machine made six lever type patla which is fixed in

height wise or width wise of cabinet. Lever rod 10mm

round. Hinges and brackets three nos. on each side size

75HxI.60mm thick mm and 1.6mm thick sheet for

brackets. Die cast handle door metallic, nickel;/chrome

plate with double nut. Key

cover of best quality metallic

nickel/chrome. Lock-Godrej Type cabinet lock / Grace

Lever. Leg 75 x 75mm duly welded are riveted. The

quoting price should be inclusive of all types of taxes &

duties packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications and

make. As per the direction of the Architect / Engineer In

charge. GLASS DOOR CABNET 900mm x 480mm x

22. Providing & Supplying ANGLE IRON RACK having Size- As per separate sheet attached herewith Separate

900mm x 500mm (W) x 300mm (D). The over all sheet

design & appearance of this Angle iron rack shall be as attached

shown in fig. Angle iron 35x35x2.5/3,00 mm min. thick or

alternately slotted angle or same size 35x35x2mm

used Joints in angle iron shall not be allowed. Each shelf

shall be made from CR sheet. Shelf shall be formed such

that lengthwise edges are bent two times at right angles.

First bend shall be 30mm

& second bend 8mm. Widthwise

edges are to be bent only one time. Press cut shelf corner

plate's 8nos. in upper shelf and 8no. in lower shelf, of

mm thick CR sheet. Galvanized nut both of hexagonal

hand 8mm dia x 10mm long. Bolting pressing where

ever required. No sharp edges on angle iron ends shall be

allowed, four plastic shoes of appropriate size shall be

provided for legs. No. Minus tolerance is allowed in angle

iron thickness. The quoting price should be inclusive of all

types of taxes & duties packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make. As per the direction of

the Architect / Engineer In charge. ANGLE IRON RACK

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

23. Providing & Supplying HEAVY DUTY RACK having Size- As per separate sheet attached herewith Separate

x 900mm (W) x 450mm The over all

design & appearance of this Angle iron rack shall be as attached

shown in fig. Angle iron 35x35x2.5/3.00 mm min. thick or

alternately slotted angle or same size 35x35x2mm can be

used Joints in angle iron shall not be allowed. Each shelf

shall be made from CR sheet. Shelf shall be formed such

that lengthwise edges are bent two times at right angles.

First bend shall be 30mm & second bend 8mm. Widthwise

edges are to be bent only one time. Press cut shelf corner

plate's 8nos. in upper shelf and 8no. in lower shelf, of

mm thick CR sheet. Galvanized nut both of hexagonal

hand 8mm dia X 10mm long. Bolting & pressing where

ever required. No sharp edges on angle iron ends shall be

allowed, four plastic shoes of appropriate size shall be

provided for legs, No, Minus tolerance is allowed in angle

iron thickness. The quoting price should be inclusive of all

types of taxes & duties packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make. As per the direction of

the Architect / Engineer In charge. HEAVY DUTY RACK

24. Providing & Supplying ANGLE IRON BED having overall As per separate sheet attached herewith Separate

Size- 1890/1830mm (L) x 900mm (W) x 418mm (H). sheet

Design and appearance as shown in fig. Angle iron frame attached

32x32x5/4.5mm. Lengthwise 2 Nos angle iron support of

32 x 32 x 5/4.5 mm MS angle. 13 nos strips width wise

made out of Imm. Thick CRC sheet Having width 95mm

formed type first bend 12mm second bend 8mm. Head

bow and foot bow pipe : ERW 30mm dia x 1.25mm thick.

Head bow /foot bow pipe support in widthwise one in

each side size 18mm dia x 1.25mm thick. Head bow [foot

bow vertical pipe support 10mm dia x Imm . thick 3nos

on each side. Folding arrangement of head bow/foot bow

by flat iron 18x4mm duly riveted. Mosquito net poles

support of 12mm i.d. pipe Imm thick. 75 long duly

plugged from bottom. Plastic / rubber shoe on legs.

Height of angle iron main frame from ground level

—418mm. Total length of bed including head bow/foot

bow —1890mm. The quoting price should be inclusive of

all types of taxes & duties packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make. As per the direction of

the Architect / Engineer In charge. ANGLE IRON BED Size:

1890/1830mm (L) x 900mm (W) x 418mrn (H)

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

25. Providing & Supplying Ortho Mattress,ShapeSense As per separate sheet attached herewith Separate

Orthopedic Classic Memory Foam Mattress, Mattress sheet

Single Bed, 6-1nch Bed Mattress, Single Size Mattress attached

(72x30x6 Inches, Medium Firm) with Bed sheet : Cotton

Colourd Pattern Hostel Bed Sheets. Wash Care:

Handwash... Pillow : White Plain Pillow, Size: 16x24 Inch,

Shape: Rectangular. Filling Material: Polyester Fibre....

Banket : Acrylic Blankets. Pattern: Check. Fabric: Acrylic.

Weight: 1900 Gram. Length: 7.5 Feet, Type: Single... etc.

complete as per sample approved and as directed by the

Architect and approved by the Engineer in Charge SINGLE

26. SIGNAGES ON WALL Providing, Fabricating & Fixing wall As per separate sheet attached herewith Separate

signage's using 304 grade Stainless steel brushed steel sheet

finish plate of 1.5 mm thick fixed on a wall using s.s attached

studs including punched (laser cut) lettering carried out

on s.s plate of required size and text as directed by

Engineer over the S.S plate etc.complete. Size: 450x150

27. SIGNAGES ON Door Providing, Fabricating & Fixing 304 As per separate sheet attached herewith Separate

grade Stainless steel 1.5 mm thick brushed steel finish sheet

plate fixed on a door using s.s studs and with attached

punched(laser cut) lettering carried out on s.s plate of

required size and text as directed by Engineer

etc.complete. Size: 300x150 mm

28. Providing & fixing notice board having 9mm soft board as As per separate sheet attached herewith Separate

a core material Imm laminate sheet as back material & sheet

surface of 1.0 mm. felt cloths having profile of heavy

alluminium fluted anodized profile 10 to 12 micron of

to 25 thick board 'C' channel & corner is made up of

molded virgin ABS colour hanging vertical &

horizontal hanging facility as per sletced colour

including all necessary fixture, fastners, fittings labour

material machinary etc complete as seletced and of

premium Quality as Aproved By EIC. Notice Board : size -

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

29. Providing and fixing Gypsum board ceiling as per As per separate sheet attached herewith Separate

manufactures specification incl.acrylic paint. having sheet

Tegular edge & 15 mm Thick Densified edges on the Tile attached

Periphery for Extra Strength The Light weight Gypsum

board ceiling tiles shall have, light reflection 85% non-

mbustible as per B.S.

476 part IVI 100% humidity

resistance and also having thermal conductivity

w/m KC.for the best thermal Insulation. The Light weight

calcium Silicate tile shall be of approved texture Fine

Cosmos having NRC value of 0.5 &

fissured/ Spintone/

Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per

sqm including both side) consisting of main 'T' runner

suitably spaced at joints to get required length and size of

24 X 38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross 'T' of size 24 X 28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main 'T' at 600mm centre to centre

to form agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of size

600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum) sheet

with the help of rawl plugs at 450mm centre to centre

with 25mm long dry wall screws

@ 230mm interval and

laying 15mm thick densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine

fissured/Cosmos/Spintone) in the grid including

cutting/making opening for services like diffusers, grills,

light fittings, fixtures,

smoke dtectors etc., wheneveer

required, Main 'T' runners to be suspended from ceiling

using G.I. slotted cleats of size 25x35xI.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash fasterners,

4mm G.I. adjustable rods with galvanized steel evel clips

of size 85x30x0.8mm, spaced at 1200mm center to centre

long main 'T' bottom exposed with 24mm of all T-sections

and also provide additional frame work and suspended

G.I. support as required height shall be

pre-painted with

polyester baked paint, for all heights, as per specifications,

drawings and as directed by engineer-in-charge. Note:-

Only Gypsum board ceiling area will be measured from

wall to wall. No deducation shall be made for exposed

frames/opening (cut outs) having area less than 0.30sqm.

The Gypsum board ceiling tiles shall

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light

reflection 85% non-combustible as per B.S. 476 part IVi

100% humidity resistance and also having thermal

conductivity. 0.043 w/m KC for the best thermal Insulation.

30. Providing and Arranging Blue Open Top 7 L Plastic Swing As per separate sheet attached herewith Separate

Dustbin, Capacity: 7 Litre. Color: Blue,Sky Blue,Orange. sheet

Shape: Round. Structure: Swing Top. Material: HDPE. attached

Thickness: I mm. Pattern: Plain etc, complete as seletced

and diretced by Engineer-in-charge.

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

31. Providing and Arranging 20L Plastic Bucket, Capacity: 20 As per separate sheet attached herewith Separate

Litre. Color: Blue,Sky Blue,Orange. Shape: Round. sheet

Structure: Open Top. Material: HDPE. Thickness: I mm. attached

Pattern: Plain etc. complete as seletced and diretced by

Engineer-in-charge.

32. Providing and Arranging Plastic Tumbler, Capacity: 0.750 As per separate sheet attached herewith Separate

Litre. Color: Blue,Sky Blue,Orange. Shape: Round. sheet

Structure: Open Top. Material: HDPE. Thickness: I mm. attached

Pattern: Plain etc. complete as seletced and diretced by

Engineer-in-charge.

33. Providing and fixing 19 mm thick Plywood board for As per separate sheet attached herewith Separate

drawers for 12 nos with SS basket for storage (one size sheet

gas cylinder cup board) including 50 x 25 mm size teak attached

wood frame ( equally provided ply putty on top and

bottom) I mm thick lamination board with telecopic

channel SS handle 100 mm size as per colour match with

adhesive screw bolt nut etc and finishing including cutting

holes for fixing sink etc complete. Kitchen Basket: Approx

Size 3.00 m x 0.75 m (H)

34. Providing fixing & Arranging linear workstation as per

As per separate sheet attached herewith Separate

drawing,framing the skeleton with 18mm + 18mm thick sheet

vertical and horizontal plywood patti both side cover with attached

6mm thick plywood for grooving design and finishing

with seletced laminate 1.00mm thick. Before

installation,make hole/face plate for conduit pipes of

eletcrical/networking cables with openable stud from

horizontal partition.vertical support of 18mm + 18mm

thick double plywood cover with Imm laminate finish

including 18mm thick curvica on exposed edges.Fitted

25mm thick (Partical board,interior grade)post forming

laminated top, fixed with metal clamps including

suspended metal keyboard-mouse tray fixed with

telescopic channel,cable manager and separate drawer

with lock,telescopic channel and box,made from 18mm

plywood with Imm outside and 0.8mm inside laminate as

well as 18mm post forming outside of shutter With auto

hinges of hafele or equivalent for left or right side.Drawer

run on Ebco make telescopic channel with Godrej make

lock with Two keys-Providing and fixing of

softboard(12mm thick)finished with tapestry of good

quality.partition hight 1200mm.IncIuding all materials and

labour etc.CompIete as per drawing and of premium

Quality as Aproved By EIC. Work Stations (Computer

Table): Approx Size: 900mm x 600mrn x 740mm

35. Providing and fixing 18mm thick Plywood For Student As per separate sheet attached herewith Separate

Book Self / Multuflex Rack plywood patta frame work at sheet

450 x 450 center to center frame work. frame work to be attached

covered With plywood finish with Imm thick laminate

finish.The structure fited properly on Wall with

Fastner to fixing .lncluding all materials and labour,

making necessary grooves, edge ploish etc.complete as

per detail drawing and instruction of engineer-in charge.

Size As Per Approved Drg.

INDX SPECI Page

Item No. Specificatio

as per Item Description Applicable specification n Booklet

Tender Attached

36. Providing and Arranging Corner Table made from 37mm x As per separate sheet attached herewith Separate

37 mm Indian teakwood leg and top frame made from sheet

37mmx 75mm Indian teakwood having 18 mm thick Ply attached

and 4mm thick Veneer with melamine polish and 0.8mm

thick balancing laminate at bottom for shelf made with

surrounding Indian teakwood frame of size 37 mm x

mm the top having 12 mm thick glass with edge

be placed properly in groove made. Surface to be finished

with melamine polish Including all materials and labours

etc.complete as per drawing and instruction of engineer-

in charge, Corner Table : Approx Size size 600mm x

37. Providing & fixing notice board having 9mm soft board as As per separate sheet attached herewith Separate

a core material Imm laminate sheet as back material & sheet

surface of 1.0 mm. felt cloths having profile of heavy

alluminium fluted anodized profile IO to 12 micron of

to 25 thick board C' channel & corner is made up of

molded virgin ABS greycolour hanging vertical &

horizontal hanging facility as per slected colour & size

including all necessary fixture, fastners, fittings labour

material machinary etc complete as selected and directed

by Engineer Incharge. Soft board : Size 600X600mm

38. Providing and Fixing Godrej Type Steel Cupboards in wall As per separate sheet attached herewith Separate

with steel frames and shutters using 18 gauges MS Steel sheet

sheet including necessary fixtures,fastning like locks attached

handles,hinges, with approved shade of spray

as per Directed. SS CB Door Colour

39. Providing & fixing steel back key cabinet for 40 keys As per separate sheet attached herewith Separate

having overall size of 520mm(W) x 500 mm (H) x 50mm(D) sheet

of 13mm Anodised alluminium single & double frames. attached

Back steel sheet is gay colour powder coated with 40 nos,

punched holes for key chain holding including plastic key

chain with steel wire rings numbered 1 to 40 having

corners of ABS in grey colour. Cabinet should be with

No. of lock with 2 Nos. of keys

including all necessary fixture, fastners,

fittings labour material machinary etc complete as

seletced and of premium Quality as Aproved By EIC Key

Dated Signature of Deputy E cutive Engineer Executive Engineer

the Contractor. (R & B) Sub-Division, (R & B) Division,

KHAMBHAT ANAND.

INDX SPECI Page

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at l<hambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 01 EXECUTIVE TABLE Size : (L) 1830 X (W) 1200 (H) 750 mm

Providing and Arranging EXECUTIVE TABLE in overall size : (L) 1830 X (W) 1200 (H) 750 mm.

TABLE TOP 25mm thick Marked Prelaminated Ply board IS-14587-1998 with upto date

amendment, LIPPING Teak wood half round 50mm wide, supported from inside by Jungle

wood 25 mm x 25 mm. DRAWER BOX CR sheet 0.80mm thk Confirming to IS-513 CUBOARD

size 600 (D) x 400 (W) x 450 (H) mm. DRAWER SIZE 500 (L) x 100 (D)

mm Minimum. Drawer

Nos. and one folding shelf in cup Board. FRAME & STRUCTRUE ERW Square pipe

25x25x1.25mm in size 1680 (L) x 950 (W) x 732 (H) mm. with Center Support as indicated. To

be welded in center below the top as shown in figure. CUPBOARD BOX TYPE made of 0.80mm

CRCA Sheet Confirming to IS-513. SHUTTER. FOOT REST ERW square pipe 25x25x1.25 mm in

full length and gap between two pipes Including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge.

1 Materials & Specification

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 02 EXECUTIVE CHAIR Size : -W 650 x D 650 x H 1050 / 1140 mm

Providing and Arranging EXECUTIVE CHAIR Overall size : Width 650mm Without castors, Depth

650mm, Height 1050 to 1140mm, Adjustability of seat height 440 to 530mm. Seat size

approx. Material : Seat and back should

Back size be made

500x500mm approx.

up of 12mm thick hot pressed plywood upholstered with fabric and molded Polyurethane foam

(60mm thick. With density 50-55), together with molded ABS seat and back covers. The back

foam is designed with contoured lumbar support for extra comfort. The armrest should be one

piece and made of black integral sikin polyurethane and reinforced with MS insert and scratch

and weather resistant. Castors : The twin wheel castors should be injected molded in black

Nylon. Pedestal Assy. The pedestal should be injection mounded in black 30% glass filled

Nylon with gas lift mechanism. Upholstery : The seats and backs are to be covered with

superior quality fabric. Finish : All steel components are to be painted after proper anti

corrosion pretreatment of surface Including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge.

1 Materials & Specification

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim; upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 03 EXECUTIVE TABLE overall Size : (L) 1525 X (W) 900 (H) 750 mm

Providing and Arranging EXECUTIVE TABLE Overall Size : (L) 1525 X (W) 900 (H) 750 mm.TABLE

TOP : 25mm THK. ISI Marked Pre Laminated Ply Board IS-14587-1998. With up to date

amendment. LIPPING : Teak wood half round 50mm wide, supported from inside by Jungle

wood 25 mm x 25 mm. PANNEL : Two folded edge CR sheet 0.80mm thick Confirming to IS-

513. DRAWER BOX : CR sheet 0.80mm thick Confirming to IS-513. CUBOARD size 600(D) x

350(W) x 450mm(H). DRAWER SIZE Minimum. (3 Nos) FRAME &

STRUCTRUE : ERW Square pipe 25x25x1.25mm in sizei375(L) x 750(W) x as per

Diagram CUPBOARD SHUTTER : BOX TYPE made of 0.80mm CR sheet Confirming to IS-513.

FOOT REST : ERW square pipe 25x25x1.25mm in full length and gap between two pipes approx.

85.mm Including all materials and labours etc. complete as per drawing and instruction of

Engineer-in charge.

1 Materials & Specification

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 04 EXECUTIVE TABLE Overall Size : (L) 1830 X (W) 900 (H) 750 mm

Providing and Arranging EXECUTIVE TABLE Overall Size : (L) 1830 X (W) 900 (H) 750 mm.TABLE

25mm THK. ISI Marked Pre Laminated Board IS-14587-1998. With up to date

amendment. LIPPING : Teak wood half round

50mm wide, supported from inside by Jungle

wood 25 mm x 25 mm. PANNEL : Two folded edge CR sheet 0.80mm thick Confirming to IS-

513. DRAWER BOX : CR sheet 0.80mm thick Confirming to IS-513. CUBOARD size 600(D) x

350(W) x 450mm(H). DRAWER SIZE : Minimum. (3 Nos) FRAME &

STRUCTRUE : ERW Square pipe in size1375(L) x 750(W) x as per

Diagram CUPBOARD SHUTTER : BOX TYPE made of 0.80mm CR sheet Confirming to IS-513.

FOOT REST : ERW square pipe 25x25x1.25mm in full length and gap between two pipes approx.

85.mm Including all materials and labours etc. complete as per drawing and instruction of

Engineer-in charge.

1 Materials & Specification

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 05 STUDY TABLE Size : 900 x 425 x 760 mm

Providing and Arranging STUDY TABLE Size : 900x425x760 mm TOP : Made of 18mm THK. ISI

Marked Pre Laminated Ply Board IS-14587-1998. in approved shade with half round lipping

with thinner polish or touch wood polish, shall be fitted angle frame of 32 x 32 x 3/2.5 mm

contains one extra lengthwise support of same angle. STRUCTURE : Made of M.S. angel 32 x

x 3/2.5 duly welded. Confirming to IS. PAINTS : Two coats of air drying synthetic enamel paints

of ISI mark Confirming to IS-2392 made over two coat of metal primer. FINISHED SIZE : Finished

size of Structure and top shall be as shown in figure. Including all materials and labours etc.

complete as per drawing and instruction of Engineer-in charge.

1 Materials & Specification

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 6 MID Back Chair

Providing and Arranging OFFICE CHAIR (MID BACK CHAIR) made out of aluminium die cast

in 5 pronged base, polyester mesh in back with PU lumbar pad which can be

adjustable by the

user, high density injection

molded PU with leather upholstery

in seat pan with tilt mechanism

center with PU padded height adjustable arm rest. The

height adjustment of the chair should be done with gas lift with 100 mm travel for quick and

comfortable height adjustment. It should be maintenance free and should be tested for

over 50,000 cycles using stringent quality assurance system. The gas used in the cylinder

should be non- toxic, non-flammable. The tilt mechanism should made up of cold-rolled

carbon steel sheets as per technical specifications mentioned above. The mechanism should

be with 4 position locking mechanism. Polyurethane armrests confirming to IS standard and

fabric as per the technical specifications mentioned above should be provided in the chairs

etc. complete as directed by the Architect and approved by the Engineer in Charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor shall

make sure that the item to be installed is in its perfect state as per the standards established by

itsmanufacturer. Additionally, the items installed shall not be damaged and shall be free from

any dents or scratches. It is the duty of the contractor to make proper arrangements for

protection of the items during stacking, transporting, loading/unloading till handover. The

contractor shall get the items inspected and approved by the EIC before installation. Any claim,

upon rejection of any item by the EIC will not be entertained. The contractor shall install the

item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and

arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 7 OFFICE CHAIR Size: (H) 900/455 x (W) 500 x (D) 560mm

Providing and Arranging OFFICE CHAIR (OVER HANGING ARM) Overall Size: (H) 900/455 x (W)

500 x (D) 560mm. Low back chair made out of nylon in 5-pronged base, high density injection

moulded PU withfabric upholstery in seat pan and ergonomically contoured backrest to

comfort the user with synchro tilt mechanism with fixed type PU padded arm rest. The

height adjustment of the chair should be done with gas lift with 100 mm travel for quick and

comfortable height adjustment. It should be maintenance free and should be tested for

over 50,000 cycles using stringent quality assurance system. The mechanism should be with

position locking mechanism. Polyurethane armrests confirming to IS standard and fabric as

per the technical specifications mentioned above should be provided in the chairs etc.

complete as per drawing and instruction of Engineer-in charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

be free from any dents or scratches. It is the

duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 8 STUDY CHAIR Size: (W) 500 x (D) 550 x (H) 820 mm

Providing and Arranging STUDY CHAIR Overall Size: (W) 500 x (D) 550 x (H) 820 mm with P type

handle, Non revolving oval shape with metal steel powder quoted visitor chair Including all

materials and labours etc. complete as per drawing and instruction of Engineer-in charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

be free from any dents or scratches. It is the

duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge. o

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 9 PLASTIC CHAIRS

Providing and Supplying PLASTIC CHAIRS of make Nillcamal, CELLO, SUPREME etc. Completed

as directed by the Architect and approved by the Engineer in Charge

100% Polypropylene Material, Glossy Design As Per Material Description

2 Specification

PVC Chair having Dimensions not less than Width (cm) : 56.5, Height (cm) : 78, Depth (cm) :

Material: 100% Polypropylene Material, Glossy Design ,No Assembly Required,Mid-Back Style

Design,Stackable,Ergonomic, having minimum item weight not less than 2.5 kg per piece, safe

for seating for a person with 150kg incl warranty,colour and of premium quality and as

directed by EIC.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 10 WOODEN FIVE SEATED SOFA

Providing & Supplying WOODEN FIVE SEATED SOFA made using Indian Teak wood in

framing and support of 19mm thick WP plywood, box of the sofa made with

100mm Thick High Density 'U' foam seat and 50mm Thick High Density 'UI foam in back

rest portion with imported POLYTEEL recron covering on back portion with textured

TAPESTRY black Leather covering and S.S. legs with necessary fixtures & fastening etc.,

competed as per sample approved & as directed by the Engineer in Charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

5 seater sofa with frame :- The indian teakwood confirming to M-29 shall be used

for whole structure framing including legs ,armerest & other design with smooth polished

edges & shape as per drawing / photograph or as directed by engineer-in-charge with

melamine matt finish polish

Seating Cushions :- The seat cushion is made of 7 inches multi layered foam

of density 40 D and 25mm supersoft HD with polyster fill outer layer of

gsm. The seating

cushions have 100 mm of elastic webbing of 350 gsm with diagonal weave. The thread used is

nylon bonded to provide long lasting stich strength.

Back Rest :- The back rest is 80mm foam of 40 Density with polyster

poly fill outer layer of 180 gsm. The polyster poly fill keeps the uphosltery wrinkle free and soft.

The seat is made up of moulded Foam, upholstered with fabric. Foam density 40 kg/m3 and

hardeness 14(+/-2) on Hampden machine at 25% compression

Tapestry, fabric &foam shall of approved make and as per the General specification No.-

The three seater sofa shall be as per drawing / photograph as required & directed by Engineer-

All teakwood members shall be finished with smooth edges and shape as directed by Engineer-

After completion of teakwood framing and all foam fixing work

lining work and polishing work

shall be executed.

The whole work is to be completed as per design, sample & drawing and shall be as per the

instruction of Engineer-in-charge.

Melamine polish shall be carried out as per the standard detail mentioned in the para

Direction of Melamine polishing on new surface)( a to f ) of detailed specification of Item No.-l

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 11 WOODEN THREE SEATED SOFA

Providing & Supplying WOODEN THREE SEATED SOFA made using Indian Teak wood in

framing and support of 19mm thick WP plywood, box of the sofa made with

100mm Thick High Density 'U' foam seat

in and 50mm Thick High Density 'U' foam in back

rest portion with imported POLYTEEL recron covering

on back portion with textured

TAPESTRY black Leather covering and S.S. legs with necessary fixtures & fastening etc.,

competed as per sample approved & as directed by the Engineer in Charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

5 seater sofa with frame :- The indian teakwood confirming to M-29 shall be used

for whole structure framing including legs ,armerest & other design with smooth polished

edges & shape as per drawing / photograph or as directed by engineer-in-charge with

melamine matt finish polish

Seating Cushions The seat cushion is made of 7 inches multi layered foam

of density 40 D and 25mm supersoft HD with polyster fill outer layer of 180 gsm. The seating

cushions have 100 mm of elastic webbing of 350 gsm with diagonal weave. The thread used is

nylon bonded to provide long lasting stich strength.

Back Rest :- The back rest is 80mm foam of 40 Density with polyster

poly fill outer layer of 180 gsm. The polyster poly fill keeps the uphosltery wrinkle free and soft.

The seat is made up of moulded Foam, upholstered with fabric. Foam density 40 kg/m3 and

hardeness 14(+/-2) on Hampden machine at 25% compression

Tapestry, fabric &foam shall of approved make and as per the General specification No.-

The three seater sofa shall be as per drawing / photograph as required & directed by Engineer-

All teakwood members shall be finished with smooth edges and shape as directed by Engineer-

After completion of teakwood framing and all foam fixing work

lining work and polishing work

shall be executed.

The whole work is to be completed as per design, sample & drawing and shall be as per the

instruction of Engineer-in-charge.

Melamine polish shall be carried out as per the standard detail mentioned in the para

Direction of Melamine polishing on new surface)( a to f ) of detailed specification of Item No.-l

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 12 CENTER TABLE : size 900mm x 600mrn x 450mm

Providing and Arranging CENTER TABLE made from 37mm x 37mrn size Indian teakwood

top frame made from 37mmx 75mrn Indian teakwood having 18mm thick Ply

and 4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at

bottom for shelf made with surrounding Indian teakwood frame of size 37mm x 12mm.

The top having 12mm thick frosted glass with edge finish to be placed properly in groove

made. Surface to be finished with melamine polish including all materials and labours etc,

complete as per drawing and instruction of engineer-in-charge.

MR Grade Ply of 18 mm thick O

Indian Teakwood shall be use for frame structure inclusing legs of desired size and shape

as shown in the drawings or as directed by engineer-in-charge.

e Top of shelf is finished with 4 mm thick Natural Teak veneer

Bottom of shelf is finished with 0.8mm thick balancing laminate

Plywood shelf border is finished with 25 x12 mm indian teakwood border patti with

Good quality adjustable stud / buffer/ shoe at bottom

All wooden and veneer surface is finished with melamine polish.

12 mm thick clear float glass shall be fixed on top resting on teakwood framing.

18 mm thick MR Grade plywood shall confirm to IS 303- Reaffirmed 2003 & of approved

Fixtures & joineries shall confirm to General Specification No.-3

4 mm thick veneer shall be of approved make

Imm/0.8mm thick laminate shall be of approved make

Adhesive shall confirm to General Specification No.-3

All required hardwares shall confirm to General Specification No.-

12 mm thick clear float glass shall confirm to General Specification No.-

Teakwood shall confirm to the standard specification of the booklet and confirm to M-29

Tea Table size : 900mm x 600mm x 450 mm (H)

Entire skeleton shall be made from materials described in item Description and detailed

MR garde ply of 18 mm thick as per the requirement

Whole unit shall be made of Indian teakwood having frame of size 75mm x 37mm ,frame

support of size 75 mm x 37mm & legs of size 37mm x 37mm desired shape as specified in

the drawing / Photograph or as directed by Engineer-in-charge.

All edges shall be finished with indian teakwood border of specified size with melamine

12 mm thick clear float glass shall be placed on teakwood framing with polished smooth

Top of the shelf shall be finished with 4.00 mm thick natural teak veneer and Bottom of

shelf shall be finished with balancing laminate of 0.8mm thick.

Shelf border shall be covered by indian teakwood border patti of size 25 mm x 12 mm

with smooth surface and edges and shape as directed by engineer-in-charge.

Melamine polish shall be carried out as per the standard detail mentioned in the para

Direction of Melamine polishing on new surface)( a to f ) of detailed specification

Veneer and balancing laminate shall be used without any bubbles and scratches in

perfect style and shape shall be used as per drawing and directed by Engineer-in-

charge.All the ply member for table and drawer box shall be exactly in right angle and

true shape. The right angle checked from inside surface of ply frames of the respective

members.All the member shall be straight without any wrap of bow and shall have

smooth surface at all sides exposed in right angle to each other.Veneer/ Laminate sticking

shall have airless pressing in true line,level and shape without any bubble as per drawing.

All materials, hardware, accessories, adhesives, lamination sheet shall be as per IS

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all

materials, fixtures, joineries hardwares etc & labour charges to complete the work

satisfactorily including supplying and arranging as per layout paln at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 13 3 Seater S.S. Gang Seater :size 1590mm x 480mm x 880mm (H)

Providing and placing three seater gang seater having seat and back made from CRCA

capcual Tubular frame welded with perforated Diemolded CRCA sheet base frame made

from round Tubular welded with horizontal beam Two side armrest welded with

shelf.lncluding finishing metal parts with epoxy powder coating of 50 micron thickness

incl. all materials and labour ect.Complete as per drawing and instruction of engineer-in

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications. O

The work shall be carried out with the best practice followed in the industry. The

contractor shall make sure that the item to be installed is in its perfect state as per the

standards established by its manufacturer. Additionally, the items installed shall not be

damaged and shall be free from any dents or scratches. It is the duty of the contractor to

make proper arrangements for protection of the items during stacking, transporting,

loading/unloading till handover. The contractor shall get the items inspected and

approved by the EIC before installation. Any claim, upon rejection of any item by the EIC

will not be entertained. The contractor shall install the item as directed by EIC at all

floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all

materials, fixtures, joineries , hardwares etc & labour charges for all height to complete

the work satisfactorily including supplying and arranging as per layout paln at site of work o

and as per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 14 CANTEEN TABLE Size: L-3000 x W-900 x H-760 mm

Providing and Arranging STAINLESS STEEL CANTEEN TABLE for 10 person with collapsible stools

persons overall Size: L-3000 x W-900 x H-760 mm manufacturing and supplying quality

assured SS 304 Steel Canteen Table. Finished size of table shall be as shown in figure. all

materials and labours etc. complete as per drawing and instruction of engineer-in-charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

Table 1-3000 x W-900 x H-760 mm

The work shall be carried out with the best practice followed in the industry. The contractor shall

make sure that the item to be installed is in its perfect state as per the standards established by

its manufacturer. Additionally, the items installed shall not be damaged and shall be free from

any dents or scratches. It is the duty of the contractor to make proper arrangements for

protection of the items during stacking, transporting, loading/unloading till handover. The

contractor shall get the items inspected and approved by the architect and/or EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at

Khambhat Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 15 STEEL STOOL size: (H) 690 X (W) 410 X (D) 410 mm

Providing and Arranging STEEL STOOL overall size: (H) 690 X (W) 410 X (D) 410 mm

FRAME : E.R.Ws Square pipe size 25x25x1.25mm four side welded, minimum 50.mm

taper is to be provided on legs. SEAT/TOP : 18mm THK. ISI Marked Pre Laminated Ply

Board IS-145874998. with 18mm wide half round teak wood lapping with teak polish,

FITTING Seat fitted with round head steel screws 8 Nos with washer, 2 no in each

unden all materials and labours etc. complete as per drawing and instruction of

engineer-in-charges

o MR Grade Ply of 18 mm thick

Top is finished with 1 mm thick laminate

Bottom is finished with 0.8mm thick balancing laminate

Horizontal & vertical structure made of 25 mm dia 16 gauge round tube (CRC )

Top Border is finished with T.W. edge bidding of specified size.

Good quality rubber shoe at bottom

All steel parts in powder coated finish with standard quality powder after 10 tanks anti

ERW round pipe (CRC) shall confirm to IS 1239 Part-1 2004 and shall be of specified size

as per drawings or as directed by Engineer-in-charge & of approved make

18 mm thick MR Grade plywood shall confirm to IS 303- Reaffirmed 2003 & of approved

Fixtures & joineries shall confirm to General Specification No.-

Imm/0.8mm thick laminate shall be of approved make

Adhesive shall confirm to General Specification No.-

All required hardwares shall confirm to General Specification No.-

Powder coating shall confirm to General specification No.-l

The working table shall be of overall size 300mm x 300mm x 650mm

Entire skeleton shall be made from materials described in item Description and

Horizontal & vertical structure made of 25 mm dia 16 gauge round tube (CRC )

MR grade ply of 18 mm thick as per the requirement

Top of the table shall be made from 18 mm thick MR grade ply

Table top edges shall be finished with T.W. edge bidding as directed by engineer-in-

Bottom surface shall be finished with balancing laminate of 0.8mm thick.

Epoxy powder coating shall be carried out confirming to General specification No.-

Melamine polish shall be carried out as per the standard detail mentioned in the para

2.1 Direction of Melamine polishing on new surface)( a to f ) of detailed

specification of Item No.-l

Laminate shall be used without any bubbles and scratches in perfect style and shape

shall be used as per drawing and directed by Engineer-in-charge.All the ply member for

table and drawer box shall be exactly in right angle and true shape. The right angle

checked from inside surface of ply frames of the respective members.All the member

shall be straight without any wrap of bow and shall have smooth surface at all sides

exposed in right angle to each other.Laminate sticking shall have airless pressing in true

line,level and shape without any bubble as per drawing.

Allmaterials, hardware, accessories, adhesives, lamination sheet shall be as per IS

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all

materials, fixtures, joineries hardwares etc & labour charges for all height to complete

the work satisfactorily including supplying and arranging as per layout plan at site of

work and as per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 16 WOODEN STOOL Size 450mm x 450mm x 900mm (H)

Providing and placing Indian teakwood Stool Legs & support should be made from teak wood &

top is made from teak wood 30 mm thick top and remaining porition with good quality

polishing stool Size: (L) 45 cm x (B) 45 cm x (H) 90 cm. All works shall be carried out as per

directed by engineer in charge

Top & sides Border is finished with 50x12 mm indian teakwood border patti with moulduing

Appron border is finished & shaped with 25x12 mm indian teakwood border patti

Good quality adjustable stud at bottom

All wooden surface is finished with melamine polish.

Fixtures & joineries shall confirm to General Specification No.-

Adhesive shall confirm to General Specification No.-3

All required hardwares shall confirm to General Specification No.-

Teakwood shall confirm to the standard specification of the booklet and confirm to M-29

The working table shall be of overall size 450mm x 450mm x 900mm (H)

Entire skeleton shall be made from materials described in item Description and detailed

Vertical and horizontal & supporting structure made of 50x50x1.6mm thick square and

50x25x1.8mm thick rectagular teak wood

All edges shall be finished with indian teakwood border of specified size as shown in the

drawing or as directed by engineer-in-charge with melamine polish finish

Melamine polish shall be carried out as per the standard detail mentioned in the para

Direction of Melamine polishing on new surface)( a to f ) of detailed specification of Item No.-l

All materials, hardware, accessories, adhesives shall be as per IS specification.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and

arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 17 CUPBOARD (WARDROBE) Size: 900mm x 450mm x 2130mm (H)

Providing and Arranging CUPBOARD (WARDROBE) Size: 900mm x 450mm x 2130mm (H). The

CR Sheet used shall be of prime quality, Confirming to IS-513 and thickness 1.0 MM. Each

shelf be formed such the edges are bend two times at right angle, first bend 30mm and

second bend 8mm. Door stiffener frame inside to its full height in top hat section size

100mm width. Lever rod shall be of Ms 12mm round/square bar or 10mm bright bar. Size

of hinges shall be 75mm length x 1.6mm thk. Brackets shall be made of 1.6 mm of CR sheet,

riveted or bolted on each side of hinges. Machine made lever plate (patla)with brass bush of

good quality or machine made six lever type patla. Patla shall be covered by box covered by

box over fitted with round head screws. For locking brass body Godrej type cabinet lock or

cabinet lock 61eaver die cast zinc alloy body of size(h) 65 x (W) 50mm fitted on four screws or

GRACE" LOCK. Keys in duplicate with key rings shall provided. Metallic key cover

electroplated nickel/chrome on front side of the door shall be provided. For door, die cast

chrome plated handle fitted with washer and double nut. Leg height shall be 125 mm x

mm. Including all materials and labour etc. complete as per drawing and instruction of

engineer-in-charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures,joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing & arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

It. No : 18 BOOK SHELF : 900mrn x 450mrn x 1830mm (H)

Providing & Supplying BOOK SHELF Sliding Door Cub Board having Size-1830mm Height X

900mm Width X 450mm Depth. The design of door cabinet shall be as above in the figure.

Sheet CR prime 0.80 mm thick Confirming to IS-513 with latest Amendment Compartment-

4 no. Six leaver locks of high quality in each shutter operated by

one key, supplied with key

ring. Chrome plated, metallic handles two nos, on each shutter from outside. Plane glass,

4mm thick in each shutter fitted in suitable frame from inside. Shutter sliding on ball

bearing, two nos. in each door with suitable system / double roller system. One additional

plate of 127mm hightx830mm width shall be

provided on lower side. Number of shelves in

each compartment 4 Nos. The quoting price should be inclusive of all types of taxes &

duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our

technical specifications and make. As per the direction of the Architect / Engineer In charge. o

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

Sliding door with top hanging arrangement to prevent derailment & each door provided

with 2 plastic roller having steel ball bearing for smooth movement of door & less noise.

Snap on type aethetically appealing die cast 5 lever cam lock for safe locking shall be

provided with plastic flush and recessed handle.

Screw type leveler with hex plastic base shall be provided

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make

arrangements for protection of the items during stacking, transporting, loading/unloading

till handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures,joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying fixing and arranging as per layout plan at site of work and

as per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 19 BOOK RACK : 900mm x 450mm x 1830mm (H)

Providing & Supplying BOOK RACK having Size-1830mm Height X 900mm Width X 450mm

Depth. Rigid knock down construction. Back side and door are made from 0.7 mm high yield

strength CRCA, rest in 0.8 mm CRCA. I-JDL capacity is 50 kg max. Finish with epoxy polyester

powder coated thick 50 microns. Screw type leveller with hex plastic base, metal top.

Number of shelves in each compartment 4 Nos. The quoting price should be inclusive of all

types of taxes & duties packing, forwarding, loading, unloading, installaion. Supplied strictly

as per our technical specifications and make. As per the direction of the Architect Engineer

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing & arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 20 FILE RACK : 700mrn x 1380mrn (H)

Providing & Supplying FILE RACK having Size-1380mm Height X 700mm Width X 470mm

Depth. Complete cabinet shall be made of 0.8mm CR sheet Confirming to IS-513. Locks :

Lever of high quality shall be of automatic unit type push button. Telescopic/sliding

arrangement shall be provided for drawers. Suitable size channel shall be provided

throughout the depth in 1.60mm thick sheet. One nickel label frame and a nickel/chrome

plated handle shall be provided on each drawer. Approx 12mm gap between each drawers

shall be provided. Suspension holders shall not be provided with the cabinet.The quoting

price should be inclusive of all types of taxes & duties packing, forwarding,

unloading, installaion. Supplied strictly as per our technical specifications and make. As per

the direction of the Architect / Engineer In charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing

& arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 21 GLASS DOOR CABNET : 900mm x x 1980mm (H)

Providing & Supplying GLASS DOOR CABNET having Size- 1980mm Height X 900mrn Width X

480mm Depth. The design of Glass door cabinet shall be as above in the figure. CR sheet

1.0mm thick Confirming to IS-513. Shelf 4 nos. forming five compartments. Edge first

bending 30mm and second edge bend 8mm and depth of shelf 400mm. Plan glass

5mm/4.5mm thick on each side of door with suitable cushion pads. The glasses shall fit in an

additional frame of top section which is fixed to shutter frame from inside. Machine made

lever plate (Patla ) with brass bush or machine made six lever type patla which is fixed in

height wise or width wise of cabinet. Lever rod 10mm round. Hinges and brackets three nos.

on each side size 75Hx1.60mm thick mm and 1.6mm thick sheet for brackets. Die cast handle

door metallic, nickel;/chrome plate with double nut. Key cover of best quality metallic

nickel/chrome. Lock-Godrej Type cabinet lock / Grace 6 Lever. Leg 75 x 75mm duly welded

are riveted. The quoting price should be inclusive of all types of taxes & duties packing,

forwarding, loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. As per the direction of the Architect / Engineer In charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing

& arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 22 ANGLE IRON RACK : 900mm (H) x 500mm (W) x 300mm (D)

Providing & Supplying ANGLE IRON RACK having Size- 900mm (H) x 500mm (W) x 300mm

over all design & appearance of this Angle iron rack shall be as shown in fig. Angle

iron 35x35x2.5/3.00

mm min. thick or alternately slotted angle or same size 35x35x2mm can

be used Joints in angle iron shall not be allowed. Each shelf shall be made from CR sheet.

Shelf shall be formed such that lengthwise edges are bent two times at right angles. First

bend shall be 30mm & second bend 8mm. Widthwise edges are to be bent only one time.

Press cut shelf corner plate's 8nos. in upper shelf and 8no. in lower shelf, of 0.80 mm thick

CR sheet. Galvanized nut both of hexagonal hand 8mm dia x 10mm long. Bolting & pressing

where ever required. No sharp edges on angle iron ends shall be allowed, four plastic shoes

of appropriate size shall be provided for legs. No. Minus tolerance is allowed in angle iron

thickness. The quoting price should be inclusive of all types of taxes & duties packing,

forwarding, loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. As per the direction of the Architect / Engineer In charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing & arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 23 HEAVY DUTY RACK : 1830mm (H) x 900mm (W) x 450mm (D)

Providing & Supplying HEAVY DUTY RACK having Size- 1830mm (H) x 900mm (W) x 450mm

over all design & appearance of this Angle iron rack shall be as shown in fig. Angle

iron 35x35x2.5/3.00 mm min. thick or alternately slotted angle or same size 35x35x2mm can

be used Joints in angle iron shall not be allowed. Each shelf shall be made from CR sheet.

Shelf shall be formed such that lengthwise edges are bent two times at right angles. First

bend shall be 30mm & second bend 8mm. Widthwise edges are to be bent only one time.

Press cut shelf corner plate's 8nos. in upper shelf and 8no. in lower shelf, of 0.80 mm thick

CR sheet. Galvanized nut both of hexagonal hand 8mm dia x 10mm long. Bolting & pressing

where ever required. No sharp edges on angle iron ends shall be allowed, four plastic shoes

of appropriate size shall be provided for legs. No. Minus tolerance is allowed in angle iron

thickness. The quoting price should be inclusive of all types of taxes & duties packing,

forwarding, loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. As per the direction of the Architect / Engineer In charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing & arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 24 ANGLE IRON BED Size: 1890/1830mm (L) x 900mm (W) x 418mm (H)

Providing & Supplying ANGLE IRON BED having overall Size- 1890/1830mm (L) x 900mm (W)

x 418mm (H). Design and appearance as shown in fig. Angle iron frame 32x32x5/4.5mm.

Lengthwise 2 Nos angle iron support of 32 x 32 x 5/4.5 mm MS angle. 13 nos strips width

wise made out of Imm. Thick CRC sheet Having width 95mm formed type first bend 12mm

second bend 8mm. Head bow and foot bow pipe : ERW 30mm dia x 1.25mm thick. Head bow

/foot bow pipe support in widthwise one in each side size 18mm dia x 1.25mm thick. Head

bow /foot bow vertical pipe support 10mm dia x Imm thick 3nos on each side. Folding

arrangement of head bow/foot bow by flat iron 18x4mm duly riveted. Mosquito net poles

support of 12mm i.d. pipe Imm thick. 75 long duly plugged from bottom. Plastic / rubber

shoe on legs. Height of angle iron main frame from ground level —418mm. Total length of

bed including head bow/foot bow —1890mm. The quoting price should be inclusive of all

types of taxes & duties packing, forwarding, loading, unloading, installaion. Supplied strictly

as per our technical specifications and make. As per the direction of the Architect / Engineer

materials shall be as per item description as approved

All by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying, fixing & arranging as per layout plan at site of work and as

per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed specifications

Item No : 25 SINGLE BED Full Set [Mattress + Bed sheet + Pillow + Banket]

Providing & Supplying Ortho Mattress,ShapeSense Orthopedic Classic Memory Foam

Mattress, Mattress Single Bed, 6-lnch Bed Mattress, Single Size Mattress (72x30x6 Inches,

Medium Firm) with Bed sheet : Cotton Colourd Pattern Hostel Bed Sheets. Wash Care:

Handwash... Pillow : White Plain Pillow, Size: 16x24 Inch, Shape: Rectangular. Filling Material:

Polyester Fibre.... Banket : Acrylic Blankets. Pattern: Check. Fabric: Acrylic. Weight:

Gram. Length: 7.5 Feet. Type: Single... etc. complete as per sample approved and as directed

by the Architect and approved by the Engineer in Charge

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the EIC before

installation. Any claim, upon rejection of any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials

etc & labour charges for all height to complete the work satisfactorily including supplying &

arranging as per layout plan at site of work and as per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 26 SIGNAGES ON WALL Size: mm

SIGNAGES ON WALL Providing, Fabricating & Fixing wall signage's using 304 grade Stainless

steel brushed steel finish plate of 1.5 mm thick fixed on a wall using s.s studs including

punched (laser cut) lettering carried out on s.s plate of required size and text as directed

by Engineer over the S.S plate etc.complete. Size: mm

1.5mm thick S.S. 304 grade steel plate, using S.S. Studs

2 Specification

SIGNAGES ON WALL

Providing, Fabricating & Fixing wall signage's using 304 grade Stainless steel brushed steel

finish plate of 1.5 mm thick fixed on a wall using s.s studs including punched (laser cut)

lettering carried out on s.s plate of required size and text as directed by Engineer over the

S.S plate etc.complete. Size: 450x150 mm

Lettering shall be as per user department requirement. Fixing shall be done on wall as directed

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of Nos.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 27 SIGNAGES ON Door Size:

SIGNAGES ON Door

Providing, Fabricating & Fixing 304 grade Stainless steel 1.5 mm thick brushed steel finish

plate fixed on a door using s.s studs and with punched(laser cut) lettering carried out on

plate of required size and text as directed by Engineer etc.complete. Size: 300x150 mm

1.5mm thick S.S. 304 grade steel plate, using S.S. Studs

2 Specification

SIGNAGES ON Door

Providing, Fabricating & Fixing 304 grade Stainless steel 1.5 mm thick brushed steel finish

plate fixed on a door using s.s studs and with punched(laser cut) lettering carried out on s.s

plate of required size and text as directed by Engineer etc.complete. Size: mm

Lettering shall be as per user department requirement. Fixing shall be done on wall as directed

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of Nos.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 28 Notice Board : size -

Providing & fixing notice board having 9mm soft board as a core material Imm laminate

sheet as back material & surface of 1.0 mm. felt cloths having profile of heavy alluminium

fluted anodized profile 10 to 12 micron of 18 to 25 thick board 'C' channel & corner is made

up of molded virgin ABS grey colour hanging vertical & horizontal hanging facility as per

sletced colour & size including all necessary fixture, fastners, fittings labour material

machinary etc complete as seletced and of premium Quality as Aproved By EIC.

Woolen Flannel Clother for pin Boards having thickness 1.00mm (+0.20) and shade like Red

Green blue Grey, Maroon & Beige as selected by EIC

Core Material shall be 9 mm thick insulating moisture resistant MDF board having heat

B) conductivity coefficient (w/mk= 0.045 0.050 ) & density shall be higher than 230 kg/m &

weight shall be 2.00 kg/sq.mt(+/- 200 grm )

Backing Material shall be galvanized steel having thickness of 0.3mm +0.2mm and weight

shall be 2.80 kg/sq.mt

Anodized aluminium profile shall have front dimension 25mm , side 16mm avg wall

thickness 1.15 mm , weight shall be 0.123 kg of standard product

Strong moulded ABS chrome plated plastic corners shall be provided at all four corners

F) Approximate weight of OVERALL board per sq.mt shall be 4.5 kg

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim, upon rejection of any item by the EIC will not be

entertained. The contractor shall install the item as directed by EIC at all floors/all heights and

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per

the instruction of Engineer-in-charge,

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 29 Gypsum Ceilling

Providing and fixing Gypsum board ceiling as per manufactures specification incl.acrylic paint. having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight

Gypsum board ceiling tiles shall have, light reflection 85% non-mbustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity 0.0430 w/m KC.for the best thermal Insulation.

The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/ Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at

joints to get required length and size of 24 X 38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross 'T' of size 24 X 28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main 'T' at 600mm centre to centre to form agrid

1200x600mm and size 24x48mm made of 0.30mm thick (Minimum) sheet to be interlocked at middle o

the 1200x600mm panel to form grid of size 600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24x24x3000mm made of 0.40mm thick (minimum) sheet

with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick densified edges light weight calcium silicate ceiling tiles of approved

texture (Fine fissured/Cosmos/Spintone) in the grid including cutting/making opening for services like

diffusers, grills, light fittings, fixtures, smoke dtectors etc., wheneveer required, Main 'T'

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5mm dia

and 50mm long dash fasterners, 4mm G.I. adjustable rods with galvanized steel evel clips of size

85x30xO.8mm, spaced at 1200mm center to centre long main 'T' bottom exposed with 24mm of all T-

sections and also provide additional frame work and suspended G.I. support as required height shall be

pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by

engineer-in-charge. Note:- Only Gypsum board ceiling area will be measured from wall to wall. No

deducation shall be made for exposed frames/opening (cut outs) having area less than 0.30sqm. The

Gypsum board ceiling tiles shall fissured/ Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85%

non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivit

1 Material & Workmanship :

M/F Suspended Ceiling includes Gypsteel ULTRA@ Perimeter Channel {Material-Gl(lS513),YS-

260Mpa,Finish-Galvanised 120GSM(lS27 )} is fixed along the perimeter of existing wall/ partition with

the help of HILTI HPS- 1 (6x40) impact anchor, at 600mm centres.

-Gypsteel ULTRAO Ceiling Angle {Material-Gl(lS513),YS-260Mpa,Finish-Galvanised 120GSM(lS277)} is

suspended up to 1.5m height by fixing it to the Gyproc@ soffit clit {GI(lS513)YS-260Mpa,Finish-

Galvanised 120GSM(lS277) }with Soffit Cleat and or Gyproc@ Rawl Plug- Ø8x45mm {Material-IS 513 CR2

grade, Zinc coating (7 to 8 microns)Pull Out Load- 7.5kN for M30 concrete grade} creating 1220mm x

1220mm grid. Gypsteel ULTRAO Intermediate channel {Material-Gl(lS513),YS-260Mpa,Finish-

Galvanised 120GSM(lS277) } ULTRA@ Ceiling Angle with M6 x 12mm Hex Bolt &

is fixed to the Gypsteel

Hex Nut arrangement {Material—As per EN 10083 Finish —

Zinc Plating} or with 2 Nos of Ø4.2x13

Gyproc@ metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness-

The Gypsteel ULTRA@ Ceiling Section {Material-Gl(lS513),YS-260Mpa,Finish-Galvanised

120GSM(lS277)} is then fixed to the Gypsteel ULTRA@ Intermediate Channel {Material-Gl(lS513),YS-

260Mpa,Finish-Galvanised 120GSM(lS277)} with the help of Gyproc@ Connecting Clip {Material-High

carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish-Zinc plating 4-6 micron} and in direction

perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge

Gypboard@ Plain (conforming to IS 2095 Part 1 : 2011) is then screw fixed to ceiling section with 25mm

drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at

square and tapered edges of the boards are to be jointed and finished so as to have a flush look

which includes filling and finishing with Jointing Compound & Joint Paper tape.

-Knurled steel section has effective thickness of 2 T ( 2xdepth), better load carrying capacity, enhanced

screw retention, Improved acoustic performance & fire resistance as compared to plain steel section.

3 Mode of Measurement :

The rate shall be consolidated for all above items. The rate shall include cost of all materials, fixtures,

joineries hardwares etc & labour charges for all height to complete the work satisfactorily for all floor

height including supplying and arranging as per layout plan at site of work and as per the instruction of

Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of Sq.mt.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 30 DUSTBIN

Providing and Arranging Blue Open Top 7 L Plastic Swing Dustbin, Capacity: 7 Litre. Color:

Blue,Sky Blue,Orange. Shape: Round. Structure: Swing Top. Material: HDPE. Thickness: 1 mm.

Pattern: Plain etc. complete as seletced and diretced by Engineer-in-charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim, upon rejection of any item by the EIC will not be entertained,

The contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc

& labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 31 PLASTIC BUCKET

Providing and Arranging 20L Plastic Bucket, Capacity: 20 Litre. Color: Blue,Sky Blue,Orange.

Shape: Round. Structure: Open Top. Material: HDPE. Thickness: 1 mm. Pattern: Plain etc.

complete as seletced and diretced by Engineer-in-charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

be free from any dents or scratches. It is the

duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim, upon rejection of any item by the EIC will not be entertained.

The contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials, etc

& labour charges for all height to complete the work satisfactorily including supplying and

arranging as per layout plan at site of work and as per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 32 PLASTIC TUMBLER

Providing and Arranging Plastic Tumbler, Capacity: 0.750 Litre. Color: Blue,Sky Blue,Orange.

Shape: Round. Structure: Open Top. Material: HDPE. Thickness: 1 mm. Pattern: Plain etc.

complete as seletced and diretced by Engineer-in-charge.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship : O

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

be free fromany dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim, upon rejection of any item by the EIC will not be entertained.

The contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials, etc

& labour charges for all height to complete the work satisfactorily including supplying and

arranging as per layout plan at site of work and as per the instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 33 Kitchen Basket: Approx Size 3.00 m x 0.75 m (H)

Providing and fixing 19 mm thick Plywood board for drawers for 12 nos with SS basket for

storage (one size gas cylinder cup board) including 50 x 25 mm size teak wood frame ( equally

provided ply putty on top and bottom) 1 mm thick lamination board with telecopic channel SS

handle 100 mm size as per colour match with adhesive screw bolt nut etc and finishing including

cutting holes for fixing sink etc complete.

The Plywood shall conform to M-37 and it shall be covered on One sides with laminated sheet

of standard manufacturer of approved brand. The wood work in Indian teak shall be conform to

M-29. The S.S. fixture & fastening shall be approved quality & ISI marked as directed by

engineer in charge.

2 Workmanship :

The shutters below kitchen platform consist of Indian teak wood frame of 50 x 25 mm size. The

shutters fixed in teak wood frame shall consists of 19 mm thick commercial ply covered

side with laminate sheet and each compartment having sliding drawer with telescopic channel

with S.S. drawer basket type as directed. The frames and shutters shall be carried out as per

Item No.10.1 /P. [A] /P.68 of G.T.S. booklet of Buildding work and polishing to exposed wooden

surface shall be carried out as & where required & as directed. The all the work shall be carried

out in good live & level. Also all the drawers shall be open easily by Telescopic chanal. The inside

frame & plywood surface shall be polished.

3 Mode of Measurement

The payment shall be for the completed item of work inclusive of cup-boards Indian teak wood

frame with 19 mm thick teak wood shutter having S.S. fixtures and fastenings with applying

three coats of varnishing over teak wood frame and shutter including drawers of S.S. iron basket

type as directed by Engineer-in-charge. The rate includes cost of all materials, labour and fittings

for executing completed item of work as directed by Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 34 Linear Work Station-1200mm x 675mm x 1200mm

& Arranging linear workstation as per drawing,framing the skeleton with

18mm + 18mm thick vertical and horizontal plywood patti both side cover with 6mm thick

plywood for grooving design and finishing with seletced laminate 1.00mm thick. Before

installation,make hole/face plate for conduit pipes of eletcrical/networking cables with

openable stud from horizontal partition.vertical support of 18mm + 18mm thick double

plywood cover with Imm laminate finish including 18mm thick curvica on exposed edges.Fitted

25mm thick (Partical board,interior grade)post forming laminated top, fixed with metal clamps

including suspended metal keyboard-mouse tray fixed with telescopic channel,cable manager

and separate drawer with lock,telescopic channel and box,made from 18mm plywood with

Imm outside and 0.8mm inside laminate as well as 18mm post forming outside of shutter with

auto hinges of hafele or equivalent for left or right side.Drawer run on Ebco make telescopic O

channel with Godrej make lock with Two keys.Providing and fixing of softboard(12mm

thick)finished with tapestry of good quality.partition hight 1200mm.lncluding all materials and

labour etc.Complete as per drawing and of premium Quality as Aproved By EIC.

19 mm thick MR Grade plywood shall confirm to IS 303- Reaffirmed 2003 & of approved make

Fixtures & joineries shall confirm to General Specification No.-

Imm / 0.8mm thick laminate shall be of approved make

Adhesive shall confirm to General Specification No.-

All required hardwares shall confirm to General Specification No.-

25 mm thick Pre-laminated board shall be of approved make

Soft Board shall be of good quality

Tapestry shall confirm to General Specification No.-

2 Workmanship :

The workstation shall be of size 1200mm x 675mmx 1200mm

Skeleton of overall thickness of 36 mm shall be made from 19mm thick MR grade ply interlinked

with each other to form complete knock down joinery for required size. It should have facility

for wire management, supporitng cantilever worktop etc. The skeleton

should include top

runners, bottom skirting etc. End trims and

corner connectors in form of different types of

joinery such as 90 degree, 120 degree

180 degree etc.

The exposed end of the frames are to be finished with 1.2 mm thick aluminium extrusion alloy

epoxy powder coated end covers and posts at different junctions.

All metal components such as steel and aluminium are to be pre-treated in 7 tank pre-

treatment plant prior to powder coating.

The framework should have snap fitted skirting of minimum 85mm height made up of 0.8mm

thick CRCA steel.

The junctions are neatly rounded off by means of metal caps.

Height Adjuster : Heavy duty glide screws of suitable design with good material shall be provided

at the base of the frame at suitable intervals for adjusting the level of the workstation up to

10 mm to take care of variations in the floor level. Inserting or placing of any type of packing

material for levelling will not be allowed.

Raceway : A separate trench with removable panels of 100 to 150 mm size shall be provided at

bottom level for networking, telephone socket and above or below worktop levels will be for

electrical sockets to floow the

norms of keeping both i.e. data and power services. cut out shall

be provided to run cables throughout the partitions wherever required. The transmission of

cables shall be at special beams fixed to the frames, which are fitted with switch board plate on

which the high quality switches/ sockets shall be fixed.

Soft Board Tile : shall be provided on one side of partition made up of minimum 6 mm thick MDF

board with fabric of approved shade & quality

White Marker Tile : shall be made up of 9 mm pre-laminated board with glossy/matt grid finish

having edges sealed with black paint

Table tops and gable ends for workstation :

The basic material of the table top shall be made out of 25 mm thick pre-laminated partical

board. The table should have a balancing laminate on the bottom. The bracket shall be in CRCA

steel duly powder coated 50 micron thickness and table should be finished with

edge bidding from all sides. All the table should be provided with gable ends made up of 25 mm

thickpre-laminated particle board as per approved shade and design, The gable ends should be

attached to the partition and table with the help pf necessary brackets and bars. All exposed

surface should be properly sealed with PVC bidding.

Key-Board Tray with mouse tray for work station : Key-Board tray shall confirm to the General

Specification No.-

CPU Trolley : CPU Trolley shall confirm to the General Specification No.-

Drawer Unit size450mm x 550mm x 600mm Top 18mm thick ply with curvica laminate

finish.Side drawer and shutter made of 18mm thick ply with laminate finish.All edge shall be

finished with teak wood border of specified size with melamine polish.Drawer run of telescopic

chennal and shutter hang on auto hinges 0 degree.Goode quality of buffer shall be provided at

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries , hardwares etc & labour charges to complete the work satisfactorily including

supplying and arranging as per layout paln at site of work and as per the instruction of Engineer-

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 35 Multiflex rack/Library rack

Providing and fixing 18mm thick Plywood For Student Book Self / Multuflex Rack plywood patta

frame work at 450 x 450 center to center frame work. frame work to be covered with plywood

finish with Imm thick laminate finish. The structure fited properly on Wall with naccesary Fastner

to fixing .lncluding all materials and labour, making necessary grooves, edge ploish etc.complete

as per detail drawing and instruction of engineer-in charge.

18 mm thick MR Grade plywood shall confirm to IS 303- Reaffirmed 2003 & of approved make

Fixtures & joineries shall confirm to General Specification No.-

Imm / 0.8mm thick laminate shall be of approved make

Adhesive shall confirm to General Specification No.-

All required hardwares shall confirm to General Specification No.-

25 mm thick Pre-laminated board shall be of approved make

Soft Board shall be of good quality

Tapestry shall confirm to General Specification No.-

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor shall

make sure that the item to be installed is in its perfect state as per the standards established by

itsmanufacturer. Additionally, the items installed shall not be damaged and shall be free from

any dents or scratches. It is the duty of the contractor to make proper arrangements for

protection of the items during stacking, transporting, loading/unloading till handover. The

contractor shall get the items inspected and approved by the architect and/or EIC before

installation. Any claim, upon rejection of

any item by the EIC will not be entertained. The

contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges to complete the work satisfactorily including

supplying and arranging as per layout paln at site of work and as per the instruction of Engineer„

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one Square

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 36 Corner Table : Approx Size size -

Providing and Arranging Corner Table made from 37mm x 37 mm Indian teakwood leg and top

frame made from 37mmx 75mm Indian teakwood having 18 mm thick Ply and 4mm thick

Veneer with melamine polish and 0.8mm thick balancing laminate at bottom for shelf made

with surrounding Indian teakwood frame of size 37 mm x 25 mm the top having 12 mm thick

glass with edge finish to be placed properly in groove made. Surface to be finished with

melamine polish Including all materials and labours etc. complete as per drawing and

instruction of engineer-in charge.

Top & sides Border is finished with mm indian teakwood border patti with moulduing

Appron border is finished & shaped with 25x12 mm indian teakwood border patti

Good quality adjustable stud at bottom

All wooden surface is finished with melamine polish.

Fixtures & joineries shall confirm to General Specification No.-

Adhesive shall confirm to General Specification No.-3

All required hardwares shall confirm to General Specification No.-

Teakwood shall confirm to the standard specification of the booklet and confirm to M-29

The working table shall be of overall size 450mm x 450mm x 900mm (H)

Entire skeleton shall be made from materials described in item Description and detailed

Vertical and horizontal & supporting structure made of 50x50x1.6mm thick square and

50x25x1.8mm thick rectagular teak wood

All edges shall be finished with indian teakwood border of specified size as shown in the

drawing or as directed by engineer-in-charge with melamine polish finish

Melamine polish shall be carried out as per the standard detail mentioned in the para

Direction of Melamine polishing on new surface)( a to f ) of detailed specification of Item No.-l

All materials, hardware, accessories, adhesives shall be as per IS specification.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 37 Notice Board

Providing & fixing notice board having 9mm soft board as a

core material Imm laminate sheet

as back material & surface of 1.0 mm. felt cloths having profile of heavy alluminium fluted

anodized profile 10 to 12 micron of 18 to 25 thick board 'C' channel & corner is made up of

molded virgin ABS grey colour hanging vertical & horizontal hanging facility as per slected

colour & size including all necessary fixture, fastners, fittings labour material machinary etc

complete as selected and directed by Engineer Incharge.

Woolen Flannel Clother for pin Boards having thickness 1.00mm (+0.20) and shade like Red

Green ,blue Grey, Maroon & Beige as selected by EIC

Core Material shall be thick insulating moisture resistant MDF board having heat

conductivity coefficient (w/mk= 0.045 0.050 ) & density shall be higher than 230 kg/m &

weight shall be 2.00 kg/sq.mt(+/- 200 grm )

Backing Material shall be galvanized steel having thickness of 0.3mm +0.2mm and weight shall

Anodized aluminium profile shall have front dimension 25mm , side 16mm

avg wall thickness

weight shall be 0.123 kg of standard product

Strong moulded ABS chrome plated plastic corners shall be provided at all four corners

Approximate weight of OVERALL board per sq.mt shall be 4.5 kg

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim,

upon rejection of any item by the EIC will not be entertained.

The contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries ,hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 38 SS CB Door Colour Coated

Providing and Fixing Godrej Type Steel Cupboards in wall with steel frames and shutters using

18 gauges MS Steel sheet including necessary fixtures,fastning like locks handles,hinges, with

approved shade of spray painting...etc.comp. as per Directed.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and shall

be free from anydents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim,

upon rejection of any item by the EIC will not be entertained.

The contractor shall install the item as directed by EIC at all floors/all heights and all levels.

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc & labour charges for all height to complete the work

satisfactorily including supplying and arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Name of Work: Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture)

Detailed Specifications

Item No : 39 Key Holder

Providing & fixing steel back key cabinet for 40 keys having overall size of 520mm(W) x

(H) x 50mm(D) of 13mm Anodised alluminium single

mm & double frames. Back steel sheet is

gay colour powder coated with 40 nos. punched holes for key chain holding including plastic

key chain with steel wire rings numbered 1 to 40 having

corners of ABS in grey colour. Cabinet

should be with 1 No. of lock with 2 Nos. of keys & top

cover in 3mm thick

including all necessary fixture, fastners, fittings labour material machinary etc complete as

seletced and of premium Quality as Aproved By EIC.

All materials shall be as per item description as approved by EIC and specified item's

Manufacturer's specifications.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be installed is in its perfect state as per the standards

established by its manufacturer. Additionally, the items installed shall not be damaged and

shall be free from any dents or scratches. It is the duty of the contractor to make proper

arrangements for protection of the items during stacking, transporting, loading/unloading till

handover. The contractor shall get the items inspected and approved by the architect and/or

EIC before installation. Any claim, upon rejection of any item by the EIC will not be

entertained. The contractor shall install the item as directed by EIC at all floors/all heights and

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials,

fixtures, joineries hardwares etc

& labour charges for all height to complete the work

satisfactorily including supplying and

arranging as per layout plan at site of work and as per the

instruction of Engineer-in-charge.

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one number.

Deputy Engineer Executive Erggiaeer

B Sub. Division R & B Division

BILL OF QUANTITIES

Name of Work :- Construction of New Boys Hostel Building for (V.Ja.) at Khambhat

Dist.Anand (Supplying and arranging and fixing furniture )

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work Unit

No may be more or In Figures estimated

1. 1.00 No. Providing and Arranging EXECUTIVE TABLE in overall size Rupees No.

1830 X (W) 1200 (H) 750 mm. TABLE TOP 25mm thick

ISIMarked Prelaminated Ply

board IS-14587-1998 with Thousand

upto date amendment, LIPPING Teak wood half round Ninety One

50mrn wide, supported from inside by Jungle wood 25 And Paise

mm x 25 mm. DRAWER BOX CR sheet 0.80mm thk Thirty One

Confirming to IS-513 CUBOARD size 600 (D) x 400 (W) x Only

mm. DRAWER SIZE

Minimum. Drawer 3 Nos. and one folding shelf in cup

Board. FRAME & STRUCTRUE ERW Square pipe

25x25x1.25mm in size 1680 (L)

with Center Support as indicated. To be welded in center

below the top as shown in figure. CUPBOARD BOX TYPE

made of 0.80mm CRCA Sheet Confirming to IS-513.

SHUTTER. FOOT REST ERW square pipe 25x25x1.25

full length and gap between two pipes Including

all materials and labour etc. complete as per drawing and

instruction of engineer-in-charge. EXECUTIVE TABLE Size

2. 1.00 No. Providing and Arranging EXECUTIVE CHAIR Overall size : 7,286.14 Rupees Seven No. 7,286

Width 650mm Without castors, Depth 650mm, Height Thousand

1050 to 1140mm, Adjustability of seat height 440 to Two Hundred

530mm. Seat size 500x500mm approx. Back size

500x610 (H) approx. Material : Seat and back should be

made up of 12mm thick hot pressed plywood upholstered

with fabric and molded Polyurethane foam (60mm thick.

With density 50-55), together with molded ABS seat and

back covers. The back foam is designed with contoured

lumbar support for extra comfort. The armrest should be

one piece and made of black integral sikin polyurethane

and reinforced with MS insert and scratch and weather

resistant. Castors : The twin wheel castors should be

injected molded in black Nylon. Pedestal Assy. : The

pedestal should be injection mounded in black 30% glass

filled Nylon with gas lift mechanism. Upholstery : The

seats and backs are to be covered with superior quality

fabric. Finish : All steel

components are to be painted

after anti corrosion

proper pretreatment of surface

Including all materials and labour etc, complete as per

drawing and instruction of engineer-in-charge.

EXECUTIVE CHAIR Size : -W 650 x D 650 x H 1050 /

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work In Figures Unit

No may be more or In Words estimated

3. 1.00 Nos Providing and Arranging EXECUTIVE TABLE Overall Size : 6,911.43 Rupees Six Nos 6,91 .43

1525 X (W) 900 (H) 750 mm.TABLE TOP : 25mm THK. Thousand

ISI Marked Pre Laminated Ply Board IS-14587-1998. With

up to date amendment. LIPPING : Teak wood half round Paise Forty

50mm wide, supported from inside by Jungle wood 25 Three Only

mm x 25 mm. PANNEL : Two folded edge CR sheet

0.80mm thick Confirming to IS-513. DRAWER BOX : CR

sheet 0.80mm thick Confirming to IS-513. CUBOARD size

600(D) x 350(W) x 450mm(H). DRAWER SIZE

Minimum. (3 Nos) FRAME &

STRUCTRUE ERW Square pipe 25x25x1.25mm in

size1375(L) x 750(W) x 732(H)mm. as per Diagram

CUPBOARD SHUTTER : BOX TYPE made of 0.80mm CR

sheet Confirming to IS-513. FOOT REST : ERW square

pipe 25x25x1.25mm length and gap between two

pipes approx. 85.mm Including all materials and labours

etc. complete as per drawing and instruction of Engineer-

in charge. EXECUTIVE TABLE Overall Size : (L) 1525 X (W)

2.00 Nos Providing and Arranging EXECUTIVE TABLE Overall Size : 6,417.54 Rupees Six Nos 12,

(L) 1830 X (W) 900 (H) 750 mm.TABLE TOP : 25mm THK. Thousand

ISI Marked Pre Laminated Ply Board IS-14587-1998. With Four Hundred

up to date amendment. LIPPING : Teak wood half round And Paise

50mm wide, supported from inside by Jungle wood

mm x 25 mm. PANNEL : Two folded edge CR sheet Only

0.80mm thick Confirming to IS-513. DRAWER BOX : CR

sheet 0.80mm thick Confirming to IS-513. CUBOARD size

600(D) x 350(W) x 450mm(H). DRAWER SIZE

Minimum. (3 Nos) FRAME &

STRUCTRUE ERW Square pipe 25x25xI.25mm in

size1375(L) x 750(W) x 732(H)mm. as per Diagram

CUPBOARD SHUTTER : BOX TYPE made of 0.80mm CR

sheet Confirming to IS-513. FOOT REST : ERW square

pipe 25x25xI.25mm in full length and gap between two

pipes approx. 85.mm Including all materials and labours

etc. complete as per drawing and instruction of Engineer-

in charge. EXECUTIVE TABLE Overall Size : (L) 1830 X (W)

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work Unit

No may be more or In Figures In Words estimated

less Rs. Ps. quantities

5. 100.00 Nos Providing and Arranging STUDY TABLE Size : 900x425x760 2,615.90 Rupees Two Nos

mm TOP : Made of 18mm THK. ISI Marked Pre Laminated

IS-14587-1998. in approved shade with half Fifteen And

round lipping with thinner polish or touch wood polish,

shall be fitted angle frame of

x 32 x 3/2.5 mm contains Only

one extra lengthwise support of

same angle. STRUCTURE :

Made of M.S. angel 32 x 32 x 3/2.5 duly welded.

Confirming to IS. PAINTS : Two coats of air drying

synthetic enamel paints of ISI mark Confirming to IS-2392

made over two coat of metal primer. FINISHED SIZE

Finished size of Structure and top shall be as shown in

figure. Including all materials and labours etc. complete as

per drawing and instruction of Engineer-in charge. STUDY

TABLE Size : 900 x 425 x 760 mm

6.00 Nos providing and Arranging OFFICE CHAIR (MID BACK 7,108.38 Rupees Seven Nos

CHAIR) made out of aluminium die cast in 5 Thousand

pronged base, polyester mesh in back with

lumbar pad which can be adjustable by the

user, high density injection molded PU with Eight Only

leather upholstery in seat pan with center tilt

mechanism with PIJ padded height adjustable arm

rest. The height adjustment of the chair should be

done with gas lift with 100 mm travel for quick and

comfortable height adjustment. It should be

maintenance free and should be tested for over

50,000 cycles using stringent quality assurance system.

The gas used in the cylinder should be non- toxic,

non-flammable. The tilt mechanism should made up

of cold-rolled carbon steel sheets as per technical

specifications mentioned above. The mechanism should

be with 4 position locking mechanism. Polyurethane

armrests confirming to IS standard and fabric as per

the technical specifications mentioned above should

be provided in the chairs etc. complete as directed

by the Architect and approved by the Engineer in

Charge. OFFICE CHAIR (MID BACK CHAIR)

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of YVork Unit

No may be more or In Figures estimated

7. 5.00 Nos Providing and Arranging OFFICE CHAIR (OVER HANGING 2,962.33 Rupees Two Nos 14,8

ARM) Overall Size: (H) 900/455 x (W) 500 x (D) 560mm. Thousand

Low back chair made out of nylon in 5-pronged base, Nine Hundred

high density injection moulded PU with fabric upholstery

in seat pan and ergonomically contoured backrest to Thirty Three

comfort the user with synchro tilt mechanism with fixed only

type PU padded arm rest. The height adjustment of

the chair should be done with gas lift with 100 mm travel

for quick and comfortable height adjustment. It

should be maintenance free and should be tested for

over 50,000 cycles using stringent quality assurance

system. The mechanism should be with 2 position locking

mechanism. Polyurethane armrests confirming to IS

standard and fabric as per the technical

(7 specifications mentioned above should be provided in

the chairs etc. complete as per drawing and instruction

of Engineer-in charge. OFFICE CHAIR Size: (H) 900/455 x

8. 100.00 Nos Providing and Arranging STUDY CHAIR Overall Size: (W) 2,517.93 Rupees Two Nos

500 x (D) 550 820 mm with P type handle, Non

revolving oval shape with metal steel powder quoted

chair Including all materials and labours etc.

complete as per drawing and instruction of Engineer-in Ninety Three

charge. VISITOR CHAIR Size: (W) 500 x (D) 550 x (H) 820 Only

9. 100.00 Nos Providing and Supplying PLASTIC CHAIRS of make Rupees Five

Nillcamal, CELLO, SUPREME etc. Completed as directed by Hundred

the Architect and approved by the Engineer in Charge Ninety Two

10. 4.00 Nos Providing & Supplying WOODEN FIVE SEATED SOFA 22,707.83 Rupees Nos

made using Indian Teak wood in framing and support Twenty Two

of 19mm thick WP plywood, box of the sofa Thousand

made with 100mm Thick High Density 'U' foam in seat

and 50mm Thick High Density 'U' foam in back rest Seven And

portion with imported POLYTEEL recron covering on Paise Eighty

back portion with textured TAPESTRY black Leather Three Only

covering and S.S. legs with necessary fixtures

fastening etc., competed as per sample approved &

as directed by the Engineer in Charge. WOODEN

FIVE SEATED SOFA

11. 4.00 Nos Providing & Supplying WOODEN THREE SEATED SOFA 19,745.50 Rupees Nos

made using Indian Teak wood in framing and support Nineteen

Of 19mm thick WP plywood, box of the sofa Thousand

made with 100mm Thick High Density 'U' foam in seat

and 50mm Thick High Density 'U' foam in back rest Forty Five

portion with imported POLYTEEL recron covering on And Paise

back portion with textured TAPESTRY black Leather Fifty Only

covering and S.S. legs with necessary

fastening etc., competed as per sample approved &

as directed by the Engineer in Charge. WOODEN

THREE SEATED SOFA

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item Of Work In Figures Unit

No may be more or estimated

12. 3.00 Nos Providing and Arranging TABLE made from

CENTER 4,936.88 Rupees Four Nos 14,810

37mm x 37mm size Indian teakwood leg and top frame Thousand

made from 37mmx 75mm Indian teakwood having Nine Hundred

18mm thick Ply and 4mm thick Veneer with melamine

polish and 0.8mm thick balancing laminate at bottom for Eighty Eight

shelf made with surrounding Indian teakwood frame of Only

size 37mm x 12mm. The top having 12mrn thick frosted

glass with edge finish to be placed properly in groove

made. Surface to be finished with melamine polish

including all materials and labours etc. complete as per

drawing and instruction of engineer-in-charge. CENTER

13. 30.00 Nos Providing and Arranging Three Seater Gang Seater having 13,327.96 Rupees Nos

seat and back made from CRCA capcular Tubular frame Thirteen

welded with perforated Die moulded CRCA sheet. base Thousand

frame made from round Tubular welded with horizontal

beam Two side armrest welded with frame including

finishing metal parts with epoxy polyster powde And Paise

coating of 50 micron thickness Including all materials and Ninety Six

labour etc.CompIete as per drawing and instruction of Only

engineer-in charge And of premium quality as approved

by EIC. 3 Seater S.S. Gang Seater

17.00 Nos. Providing and Arranging STAINLESS STEEL CANTEEN 31,592.80 Rupees Thirty Nos.

TABLE for IO One

person with collapsible stools Size

persons overall Size: L-3000 x W-900 x 1-1-760 mm

manufacturing and supplying quality assured SS 304 Steel

Canteen Table. Finished size of table shall be as shown in And Paise

figure. all materials and labours etc. complete as Eighty Only

drawing and instruction Of engineer-in-charge. CANTEEN

TABLE Size: L-3000 x W-900 x 1-1-760 mm

15. 9.00 Nos. Providing and Arranging STEEL STOOL overall size: (H)

1,678.62 Rupees One Nos. 15,1 .58

690 X (W) 410 X (D) 410 mm FRAME : E.R.W. Square pipe Thousand Six

size 25x25x1.25mm four side welded, minimum 50.mm Hundred

taper is to be provided on legs. SEAT/TOP : 18mm THK.

ISI Marked Pre Laminated Ply Board IS-14587-1998. with

18mm wide half round teak wood lapping with teak Only

polish. FITTING Seat fitted with round head steel screws

8 No. with washer, 2 no in each under. all materials and

labours etc. complete as per drawing and instruction of

engineer-in-charge. STEEL STOOL size: (H) 690 X (W)

16. 9.00 Nos. Providing and placing Indian teakwood Stool Legs & 2,962.33 Rupees Two Nos. 26,66 .97

support should be made from teak wood & top is made Thousand

from teak wood 30 mm thick top and remaining porition Nine Hundred

with good quality polishing stool Size: (L) 45 cm x (B)

shall be carried

cm x (H) 90 cm. All works out as per Thirty Three

directed by engineer in charge. WOODEN STOOL Size -

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work Unit

No may be more or In Figures estimated

17. 12.00 Nos Providing and Arranging CUPBOARD (WARDROBE) Size: 8,885.98 Rupees Eight Nos .76

900mm x 450mm x 2130mm (H). The CR Sheet used shall Thousand

be of prime quality, Confirming to IS-513 and thickness

1.0MM. Each shelf be formed such the edges are bend Eighty Five

two times at right angle, first bend 30mm and second And Paise

bend 8mm. Door stiffener frame inside to its full height in Ninety Eight

top hat section size 100mm width. Lever rod shall be of Only

Ms 12mm round/square bar or 10mm bright bar. Size of

hinges shall be 75mm length x 1.6mm thk. Brackets shall

be made of 1.6 mm of CR sheet, riveted or bolted on each

side of hinges. Machine made lever plate (patla)with brass

bush of good quality or machine made six lever type

patla. Patla shall be covered by box covered by box over

fittedwith round head screws. For locking brass body

Godrej type cabinet lock or cabinet lock 61eaver die cast

zinc alloy body of size(h) 65 x (W) 50mm fitted on four

screws or GRACE" LOCK. Keys in duplicate with key rings

shall provided. Metallic key cover electroplated

nickel/chrome on front side of the door shall be provided.

For door, die cast chrome plated handle fitted with

washer and double nut. Leg height shall be 125 mm x

mm. Including all materials and labour etc. complete as

per drawing and instruction of engineer-in-charge.

CUPBOARD (WARDROBE) Size: 900mm x 450mm x

18. 5.00 Nos Providing & Supplying BOOK SHELF Sliding Door Cub 6,911.43 Rupees Six Nos 34,

Board having Size-1830mm Height X 900mm Width X Thousand

450mm Depth. The design of door cabinet shall be as Nine Hundred

above in the figure. Sheet CR prime 0.80 mm thick Paise Forty

Confirming to IS-513 with latest

Amendment Three Only

Compartment- 4 no. Six leaver locks of high quality in

each shutter operated by one key, supplied with key ring.

Chrome plated, metallic handles two nos, on each shutter

from outside. Plane glass, 4mm thick in each shutter fitted

in suitable frame from inside. Shutter sliding on ball

bearing, two nos. in each door with suitable system /

Q, double roller system. One additional plate of 127mm

hightx830mm width shall be provided on lower side.

Number of shelves in each compartment 4 Nos. The -

quoting price should be inclusive of all types of taxes &

duties ,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical

specifications and make. As per the direction of the

Architect / Engineer In charge. BOOK SHELF : 900mm x

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work In Figures Unit

No may be more or In Words estimated

less Rs. Ps. quantities

19. 5.00 Nos Providing & Supplying BOOK RACK having Size-1830mm 6,417.54 Rupees Six Nos 32,

Height X 900mm Width X 450mm Depth. Rigid knock Thousand

down construction. Back side and door are made from

mm high yield strength CRCA, rest in 0.8 mm CRCA. UDI- And Paise

capacity is 50 kg max. Finish with epoxy polyester powder Fifty Four

coated thick 50 microns. Screw type leveller with hex Only

plastic base, metal top. Number of shelves in each

compartment 4 Nos. The quoting price should be

inclusive of all types of taxes & duties packing,

forwarding, loading, unloading, installaion, Supplied

strictly as per our technical specifications and make. As

per the direction of the Architect Engineer In charge.

BOOK RACK : 900mm x 450mm x 1830mm (H)

20. 5.00 Nos. Providing & Supplying FILE RACK having Size-1380mm 5,232.81 Rupees Five Nos. 26,

Height X 700mm Width X 470mm Depth. Complete Thousand

cabinet shall be made of 0.8mm CR sheet Confirming to Two Hundred

IS-513. Locks : 6 Lever of high quality shall be of

automatic unit type push button. Telescopic/sliding Eighty One

shall be provided for drawers. Suitable size

arrangement Only

channel shall be provided throughout the depth in

1.60mm thick sheet. One nickel label frame and a

nickel/chrome plated handle shall be provided on each

drawer. Approx 12mm gap between each drawers shall be

provided. Suspension holders shall not be provided with

the cabinet.The quoting price should be inclusive of all

types of taxes & duties packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make. As per the direction of

the Architect / Engineer In charge. FILE RACK : 700mm x

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work In Figures Unit

No may be more or estimated

less Rs. Ps. quantities

21. 10.00 Nos. Providing & Supplying GLASS DOOR CABNET having Size- 10,465.62 Rupees Ten Nos. .20

1980mm Height X 900mm Width X 480mm Depth. The Thousand

design of Glass door cabinet shall be as above in the Four Hundred

figure. CR sheet 1.0mm thick Confirming to

IS-513. Shelf 4 And Paise

nos.forming five compartments. Edge first bending

30mm and second edge bend 8mm and depth of shelf only

400mm. Plan glass 5mm/4.5mm thick on each side of

door with suitable cushion pads. The glasses shall fit in an

additional frame of top section which is fixed to shutter

frame from inside. Machine made lever plate (Patla ) with

brass bush or machine made six lever type patla which is

fixed in height wise or width wise of cabinet. Lever rod

10mm round. Hinges and brackets three nos. on each

side size 75Hx1.60mm thick mm and 1.6mm thick sheet

for brackets. Die cast handle door metallic, nickel;/chrome

plate with double nut. Key cover of best quality metallic

nickel/chrome. Lock-Godrej Type cabinet lock / Grace

Lever. Leg 75 x 75mm duly welded are riveted. The

quoting price should be inclusive of all types of taxes &

duties packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical

specifications and make. As per the direction of the

Architect / Engineer In charge. GLASS DOOR CABNET

22. 10.00 Nos. Providing & Supplying ANGLE IRON RACK having Size- 5,627.72 Rupees Five Nos. 56,27 .20

900mm (H) x 500mm (W) x 300mm (D). The over all Thousand Six

design & appearance of this Angle iron rack shall be as Hundred

shown in fig. Angle iron 35x35x2.5/3.OO mm min. thick or

alternately slotted angle or same size 35x35x2mm can be Seventy Two

used Joints in angle iron shall not be allowed. Each shelf Only

shall be made from CR sheet. Shelf shall be formed such

that lengthwise edges are bent two times at right angles.

First bend shall be 30mm & second bend 8mm.

Widthwise edges are to be bent only one time. press cut

shelf corner plate's 8nos. in upper shelf and 8no. in lower

mm thick CR sheet. Galvanized nut both of

hexagonal hand 8mm dia x 10mm long. Bolting &

pressing where ever required. No sharp edges on angle

iron ends shall be allowed, four plastic shoes of

appropriate size shall be provided for legs. No. Minus

tolerance is allowed in angle iron thickness. The quoting

price should be inclusive of all types of taxes & duties

packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications and

make. As per the direction of the Architect / Engineer In

charge, ANGLE IRON RACK : 900mm (H) x 500mm (W) x

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work Unit

No may be more or In Figures estimated

23. 12.00 Nos. Providing & Supplying HEAVY DUTY RACK having Size- 8,096.16 Rupees Eight Nos.

1830mm (H) x 900mm (W) x 450mm (D). The over all Thousand

design & appearance of this Angle iron rack shall be as

shown in fig. Angle iron 35x35x2.5/3.00 mm min. thick or

alternately slotted angle or same size 35x35x2mm can be

used Joints in angle iron shall not be allowed. Each shelf

shall be made from CR sheet. Shelf shall be formed such

that lengthwise edges are bent two times at right angles.

First bend shall be 30mm & second bend 8mm.

Widthwise edges are to be bent only one time. Press cut

shelf corner plate's 8nos. in upper shelf and 8no. in lower

mm thick CR sheet. Galvanized nut both of

hexagonal hand 8mm dia

x 10mm long, Bolting &

pressing where ever required. No sharp edges on angle

iron ends shall be allowed, four plastic shoes of

appropriate size shall be provided for legs. No. Minus

tolerance is allowed in angle iron thickness. The quoting

price should be inclusive of all types of taxes & duties

packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications and

make. As per the direction of the Architect / Engineer In

charge, HEAVY DUTY RACK : 1830mrn (H) x 900mm (W)

24. 104.00 Nos. Providing & Supplying ANGLE IRON BED having overall 10,018.19 Rupees Ten Nos. 41

Size- 1890/1830mm (L) x 900mm (W) x 418mm (H). Thousand

Design and appearance as shown in fig. Angle iron frame Eighteen And

32x32x5/4.5mm. Lengthwise 2 Nos angle iron support of

32 x 32 x 5/4.5 mm MS angle. 13 nos strips width wise

made out of Imm. Thick CRC sheet Having width 95mm

formed type first bend 12mm second bend 8mm. Head

bow and foot bow pipe : ERW 30mm dia x 1.25mm thick.

Head bow /foot bow pipe support in widthwise one in

each side size 18mm dia x 1.25mm thick. Head bow /foot

bow vertical pipe support 10mm dia x Imm , thick 3nos

on each Folding arrangement of head bow/foot bow

by flat iron 18x4mm duly riveted. Mosquito net poles

support of 12mm i.d. pipe Imm thick. 75 long duly

plugged from bottom. Plastic / rubber shoe on legs.

Height of angle iron main frame from ground level

—418mm. Total length of bed including head bow/foot

bow --1890mm, The quoting price should be inclusive of

all types of taxes & duties packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make, As per the direction of

the Architect / Engineer In charge. ANGLE IRON BED Size:

1890/1830mrn (L) x 900mm (W) x 418mm (H)

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work In Figures Unit

No may be more or In Words estimated

25. 104.00 Nos. Providing & Supplying Ortho Mattress,ShapeSense 12,155.35 Rupees Nos. .40

Orthopedic Classic Memory Foam Mattress, Mattress Twelve

Single Bed, 6-lnch Bed Mattress, Single Size Mattress Thousand

(72x30x6 Inches, Medium Firm) with Bed sheet : Cotton Fifty Five

Colourd Pattern Hostel Bed Sheets. Wash Care: And Paise

Handwash... Pillow : White Plain Pillow, Size: 16x24 Inch, Thirty Five

Shape: Rectangular. Filling Material: Polyester Fibre.... Only

Banket : Acrylic Blankets. Pattern: Check. Fabric: Acrylic.

Weight: 1900 Gram. Length: 7.5 Feet. Type: Single... etc.

complete as per sample approved and as directed by the

Architect and approved by the Engineer in Charge SINGLE

26. 115.00 Nos. SIGNAGES ON WALL Providing, Fabricating & Fixing wall 1,336.23 Rupees One Nos. 1,53,66 .45

signage's using 304 grade Stainless steel brushed steel Thousand

finish plate of 1.5 mm thick fixed on a wall using s.s Three

studs including punched (laser cut) lettering carried out

on s.s plate of required size and text as directed by And Paise

Engineer over the S.S plate etc.complete. Size: 450x150 Twenty Three

27. 54.00 Nos. SIGNAGES ON Door Providing, Fabricating & Fixing 304 Rupees Nine Nos.

grade Stainless steel

mm thick brushed steel finish Hundred

plate fixed on a door using s.s studs and with

punched(laser cut) lettering carried out on s.s plate of

required size and text as directed by Engineer Only

etc.complete. Size: 300x150 mm

28. 12.00 Nos. Providing & fixing notice board having 9mm soft board as 6,318.56 Rupees Six Nos. 75,82

a core material Imm laminate sheet as back material & Thousand

surface of 1.0 mm. felt cloths having profile Of heavy

alluminium fluted anodized profile IO to 12 micron of

to 25 thick board 'C' channel & corner is made up of

molded virgin ABS grey colour hanging vertical & Six Only

horizontal hanging facility as per sletced colour & size

including all necessary fixture, fastners, fittings labour

material machinary etc complete as seletced and of

premium Quality as Aproved By EIC. Notice Board : size -

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated but according to

Item of Work Unit

No may be more or In Figures In Words estimated

29. 270.00 Smt Providing and fixing

Gypsum board ceiling as per 2,960.31 Rupees Two Smt 7,99,