Construction Work of Godown @ FIRST Floor in R.S. No. 1031/1a/P-10, APMC Main Yard, Paliyad Road, At Botad APMC Under Self-Fund (Second Attempt)

NAME OF WORK :- CONSTRUCTION WORK OF GODOWN @ FIRST FLOOR

Location : R.S. NO. 1031/ 1A/ P-10, APMC MAIN YARD, PALIYAD ROAD, AT BOTAD

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and laying controlled cement concrete M-250 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for RCC work in (A) BEAMS: (ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.12 Sq.M 23.20 9547.56 Cumt

Providing and laying controlled cement concrete M-250 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for RCC work in (A) BEAMS : (ii) Having

cross-sectional area more than 0.12 Sq.M and upto 0.18 Sq.M 62.30 8051.70 Cumt

Providing and laying controlled cement concrete M-250 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for RCC work in (B) COLUMNS : (ii) Having

cross-sectional area more than 0.12 Sq.M and upto 0.18 Sq.M 29.30 10265.30 Cumt

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies,

Lintels, Beams, Girders and Cantilever upto floor two level. 110.00 6895.33 Cumt

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (E) Staircases excluding landing upto 4.40 7292.49 Cumt

Providing TMT Bar FE 500D reinforcement for RCC work including

bending, binding and placing in position complete upto floor two level 30830.00 76.21 Kg

Brick work using common burnt clay building brick having crushing

strength not less than 35 Kg/Sqcm. in cement mortar 1:5 (1 cement :

fine sand) for brick work in superstructure above floor two level. (B)

Conventional. 252.90 4092.26 Cumt

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) 3185.30 186.12 Sqmt

Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. 3185.30 40.59 Sqmt

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete. 568.60 326.10 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja. 513.90 40.99 Rmt

Providing and applying Exterior Emulsion paints of Asian Paints/ ICI

Dulux/ Jotun of Royal Emulsion of Asian Paints in minimum 2 coats

including scraping opening of existing cracks filling up of "V" cracks with

epoxy expandable putty to required depth, making good weak plastered/

unplastered surface with cement plaster wherever required. Item to

include Primer Making good existing surface to receive new paint

including cleaning on completion of painting work etc. comp. in all

respects. The Rate shall be included all materials and labour etc. All the

work shall be carried out as per the instruction and drawings supplied by

the consultant and the time of execution of works. Material will be

approved by engineer in charge. 568.60 215.13 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 418.50 101.17 Kg

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially designed

pipe shaft with bracket plates, guide channels and arragements for

inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete. (A) Shutters having width

Mt. and above 309.60 4495.01 Sqmt

Applying priming coat of over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil grease,

dirt and other foreign mater and scoured with brushes fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red 326.30 34.99 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 326.30 87.81 Sqmt

Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. 19.50 1797.77 Sqmt

P & L 24" x 24" vitrified 8mm thick tile flooring over 20mm (average)

base of cement mortar 1:6 (1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for light shade 623.00 1204.20 Sqmt

Providing and laying Kota stone slab 25 mm Thick in risers of steps,

dedo and pillars laid on 10 mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete. 80.20 1056.25 Sqmt

Providing and laying coloured glazed tiles of the size 300mm x 200mm x

8mm / 300mm x 450mm x 8mm in skirting, risers of steps and dedo on

10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry. 155.30 1417.36 Sqmt

Providing and laying broken chine mosaic flooring for terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out up to surface using white cement including rounding off junctions

and extending them upto 15cm along the wall, clearing with water and

oxalic acid etc. as directed. Terrace Floor 651.20 747.28 Sqmt

extra For Providing And mixing water proofing material in cement

concrete in mix proportion recommended by the manufacturers. (0.20

Kg./1 Sqmt.) 325.60 49.15 Lit/Kg

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

length. 16.00 101.90 Ea

PLUMBING & SANITARY FITTINGS :

Providing erecting fixing double coated ISI Water Tank of Required

Capacity each with all necessary fittings & connection etc. complete on

Terrace. 3000.00 3.95 Lit

Providing, laying and jointing in true line and level 15mm dia. U.P.V.C.

pipe (SCH-40) for cold water including fittings as approved by Engineer-

in-charge. Pipe shall be fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. First Floor 25mm dia. 75.00 72.65 Rmt

Providing, laying and jointing in true line and level 32mm dia. U.P.V.C.

pipe (SCH-40) for cold water including fittings as approved by Engineer-

in-charge. Pipe shall be fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. First Floor 32mm dia. 50.00 119.15 Rmt

Providing, laying and jointing in true line and level 110mm diametre

U.P.V.C. (Type B) pipe Conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring & fittings comforming to ISI :

14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110mm diameter x 149mm length x

145mm high at every 2000mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipe and joints and jointed with adhesive solvent

cement including cost of all materials. 110mm dia. 30.00 835.14 Rmt

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in 2.00 1303.70 Each

Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

cover. 2.00 291.33 Each

Providing and fixing Jet Spray Heavy duty with S.S. Braided hose 60 cm

long with including fittings. 2.00 308.99 No

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (ii) 20mm

Providing and fixing screw down bib taps of following size. (B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 6.00 186.83 No

Providing and fixing Concealed Cock 15mm dia Heavy duty with cap

including fittings. 2.00 491.30 No

Providing and fixing Angle stop cock 15mm dia Heavy duty with cap

including fittings. 16.00 407.42 No

Providing and fixing wash basin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China : (ii) Flat Back

washbasin 550 mm x 400mm size. (i) In colour. 4.00 1414.18 Each

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm

dia. 4.00 78.75 Each

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i)15mm dia. 4.00 308.72 Each

Providing and fixing chromium plated, bottle trap with necessary

couplings of approved quality for wash basin. 4.00 295.79 Each

Providing and fixing Urinal of approved quality including conecting the

urinal with waste pipe, tap etc. complete. (A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm. 10.00 1036.27 Each

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 32mm dia. 10.00 275.76 Each

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.

(A) 100mm dia. Each 2.00 282.16 Each

Providing and fixing Brass screw down stop tap for Wash Basin with

including fittings. (A) 15mm 2.00 205.82 Each

Providing and fixing ball cock of approved. quality as directed. (A)

Copper Metal (ii) 50mm dia. 4.00 189.84 Each

Providing and fixing Gun metal check or non-return fullway wheel valve.

(A) 15mm dia. F.F. 2.00 186.83 Each

Providing and fixing Gun metal check or non-return fullway wheel valve.

(E) 40mm dia. F.F. 2.00 663.42 Each

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I. Scrwed down or hinged grating inlcuding the cost of

cutting and making good the walls. 8.00 558.35 Each

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type. 4.00 1292.19 Each

Constructiing brick masonary chamber for under ground C.I. Inspection

chamber and bends with bricks having croshing strength not less than

35kg. cm2 in CM 1:5 CI cover with frame (Light duty) 455 mm x 610mm

internal dimensions, total weight of cover with frame to be not less than

38 kg. (Wt. of cover 23Kg.) and Wt. of frame 15kg.) (RCC top slabe with

1:2:4 mix (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete. in excavation work (I) Inside

dimension 455mm x 610mm and 450mm deep for single pipe line.

Electrical Work

Point wiring for Light/Bell with 2-1.5 sqmm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ ceiling complete with 6A Modular type

switch/ bell push & accessories and earth continuity of following type,

erected on PVC/ Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on/ in wall/ ceiling as per

pipe erected, with necessary Lamp holder/ ceiling rose/ H.D.Connector

as directed. (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete. Cat. III 140.00 493.89 Pt

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in/ on surface

of wall/ ceiling complete with Modular type switch & 5 pin Plug erected

on PVC/ Metallic box covered with appropriate front plate modules

erected on/ in wall/ ceiling as per pipe erected with following type of

accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat. III 42.00 788.81 Pt

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires upto 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of following

type erected on PVC/ Metallic/ Wooden box, single mounting base

frame covered with textured/ metallic/ white front plate modules erected

on/ in wall/ ceiling as per pipe erected. with necessary ceiling rose/

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ ceiling complete (Cat. III) 56.00 705.99 Pt

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single mounting base frame covered with

textured/ metallic front plate modules erected on/ in wall/ ceiling with

following type accessories. Cat. III 28.00 283.81 Pt

Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (b) 40 Amp. Cat.III 32.00 388.85 Pt

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. Cat-III 18.00 131.30 Pt

Supplying & erecting approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in existing

pipe. of following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured (1) One

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [E] CAT - 6 shielded 210.00 105.04 Mt.

Supplying & erecting earth pit of minimum bore dia. 150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge

has to ensure the value of earthing resistane mentioned intest

Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound) -Resistivity: -0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop :-<1 volt at no load & dry

form, Sulphar content :-<2% (C) Back fill Compound :-Earthing

compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (a) For Electrical Installation

up to 440V in normal soil, Length of pipe - 1 Mtr, Back filling compound -

1 Nos Bag of 15 Kg. 14.00 5416.63 Ea

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms.

buried in specially prepared 2.5 Mtr. deep earth pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug

for earthing of switch gear, conduit run or power plug etc. 14.00 808.00 Ea

For using salt and charcoal/ coke as required for pipe type earthing. 14.00 202.00 Ea

Total Amounts Rs...……

Total Amounts Rs...……

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 97,05,460=00 Put to Tender Rs. 97,05,460=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor "DESIGN POINT"

Secretary Chairman

APMC Botad APMC Botad